Commit graph

25 commits

Author SHA1 Message Date
Cristiano Giuffrida
48c6bb79f4 Driver refactory for live update and crash recovery.
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.

VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.

INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.

DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS. 
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.

DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.

KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
2010-04-08 13:41:35 +00:00
Arun Thomas
436d6012a3 Convert drivers/ and servers/ over to bsdmake
-Move libdriver to lib/
-Install all boot image services on filesystem to aid restartability
2010-03-22 21:25:22 +00:00
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Kees van Reeuwijk
c6eb51d66a Rewrite some functions to ANSI style. 2010-01-27 10:19:13 +00:00
Cristiano Giuffrida
d1fd04e72a Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.

SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic 
registration / deregistration of system services.

VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.

RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 01:20:42 +00:00
Cristiano Giuffrida
1f5841c8ed Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
  1. SEF Ping. The event occurs every time RS sends a ping to figure out
  whether a system process is still alive. The default callback implementation
  provided by SEF is to notify RS back to let it know the process is alive
  and kicking.
  2. SEF Live update. The event occurs every time RS sends a prepare to update
  message to let a system process know an update is available and to prepare
  for it. The live update support is very basic for now. SEF only deals with
  verifying if the prepare state can be supported by the process, dumping the
  state for debugging purposes, and providing an event-driven programming
  model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
  * PM notify messages primarily used at shutdown.
  * SYSTEM notify messages primarily used for signals.
  * CLOCK notify messages used for system alarms.
  * Debug messages. IS could still be in charge of fkey handling but would
  forward the debug message to the target process (e.g. PM, if the user
  requested debug information about PM). SEF would then catch the message and
  do nothing unless the process has registered an appropriate callback to
  deal with the event. This simplifies the programming model to print debug
  information, avoids duplicating code, and reduces the effort to print
  debug information.

SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.

RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
  * When an update command is issued (via "service update *"), RS notifies the
  target system process to prepare for a specific update state.
  * If the process doesn't respond back in time, the update is aborted.
  * When the process responds back, RS kills it and marks it for refreshing.
  * The process is then automatically restarted as for a buggy process and can
  start running again.
  * Live update is currently prototyped as a controlled failure.
2009-12-21 14:12:21 +00:00
David van Moolenbroek
86cc12b9a3 pci: extend NR_DRIVERS to cover all system processes 2009-11-09 10:43:46 +00:00
Tomas Hruby
4dad30937b Removed macros that depend on NOTIFY_FROM from servers and drivers. They
determine the information defined by these macros from the m_source field of the
notify message.
2009-09-29 18:47:56 +00:00
Erik van der Kouwe
1162806940 Re-disable complete_bars, it was not needed for PRO/100 despite the error message 2009-08-27 07:10:03 +00:00
Erik van der Kouwe
ada4859302 Extend Intel PRO/100 support 2009-08-26 21:01:46 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Philip Homburg
fecd153c2c Declare and call functions that check arguments and return a status code. 2008-02-22 15:56:12 +00:00
Ben Gras
d524b0b351 Don't quit (some processes want to talk to pci at reboot time) 2007-07-11 13:44:00 +00:00
Philip Homburg
0dc0d3fe5b Fixed releasing PCI resources after a driver terminates. 2007-04-24 12:55:37 +00:00
Philip Homburg
a3c8619923 Added do_del_acl. More detailed debug output for the secure device capability. 2007-04-23 14:54:51 +00:00
Ben Gras
168d766f32 . pci driver now returns devices, even when they have been pci_reserve()d
. pci_reserve() returns an error on devices that have already been reserved,
  instead of panic()ing; the pci_reserve() library call still panics,
  pci_reserve_ok() returns an int.
. this allows at_wini to use the instance value as intended, as all devices
  are seen, even reserved ones
. only devices actually used by at_wini are pci_reserve()d
. pci doesn't release devices based on argv[0], as at_wini both have the
  same name and multiple instances won't work together properly
2007-02-20 17:09:19 +00:00
Ben Gras
3f58857ce9 removed/optionalized debugging messages 2007-02-16 15:50:49 +00:00
Philip Homburg
f9ccfca2a1 (Incomplete) support for access control in PCI (pci_set_acl).
-script argument to service for crash recovery scripts
-config argument to service for driver resource configuration
restart command in service to restart a driver after a crash (for use in
crash recovery scripts).
down and refresh now take labels instead of pids.
verious changes in rs to make this work.
2006-10-20 15:01:32 +00:00
Philip Homburg
fd62815e73 Fixed a bug that would report a device more than once. Added safecopy
version of do_dev_name and do_slot_name.
2006-07-10 12:39:54 +00:00
Jorrit Herder
376d8485d8 *** empty log message *** 2006-03-10 16:20:24 +00:00
Ben Gras
cde8d88dcc Ignore system signals. 2006-02-06 15:33:39 +00:00
Philip Homburg
cf7db577ae Report resources to the kernel. 2006-01-27 13:18:07 +00:00
Ben Gras
ad7f2784fe Made 'called by' DEBUG-conditional to avoid messy startup message 2006-01-18 09:48:32 +00:00
Philip Homburg
e44aaf4c37 Many changes for cardbus support, automatic detection of PCI bridges,
resource allocation, and tracking.
2006-01-12 14:46:12 +00:00
Philip Homburg
24cf667abb PCI support in a separate driver. 2005-12-02 14:45:10 +00:00