Commit graph

28 commits

Author SHA1 Message Date
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Ben Gras
35a108b911 panic() cleanup.
this change
   - makes panic() variadic, doing full printf() formatting -
     no more NO_NUM, and no more separate printf() statements
     needed to print extra info (or something in hex) before panicing
   - unifies panic() - same panic() name and usage for everyone -
     vm, kernel and rest have different names/syntax currently
     in order to implement their own luxuries, but no longer
   - throws out the 1st argument, to make source less noisy.
     the panic() in syslib retrieves the server name from the kernel
     so it should be clear enough who is panicing; e.g.
         panic("sigaction failed: %d", errno);
     looks like:
         at_wini(73130): panic: sigaction failed: 0
         syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
   - throws out report() - printf() is more convenient and powerful
   - harmonizes/fixes the use of panic() - there were a few places
     that used printf-style formatting (didn't work) and newlines
     (messes up the formatting) in panic()
   - throws out a few per-server panic() functions
   - cleans up a tie-in of tty with panic()

merging printf() and panic() statements to be done incrementally.
2010-03-05 15:05:11 +00:00
Cristiano Giuffrida
c5b309ff07 Merge of Wu's GSOC 09 branch (src.20090525.r4372.wu)
Main changes:
- COW optimization for safecopy.
- safemap, a grant-based interface for sharing memory regions between processes.
- Integration with safemap and complete rework of DS, supporting new data types
  natively (labels, memory ranges, memory mapped ranges).
- For further information:
  http://wiki.minix3.org/en/SummerOfCode2009/MemoryGrants

Additional changes not included in the original Wu's branch:
- Fixed unhandled case in VM when using COW optimization for safecopy in case
  of a block that has already been shared as SMAP.
- Better interface and naming scheme for sys_saferevmap and ds_retrieve_map
  calls.
- Better input checking in syslib: check for page alignment when creating
  memory mapping grants.
- DS notifies subscribers when an entry is deleted.
- Documented the behavior of indirect grants in case of memory mapping.
- Test suite in /usr/src/test/safeperf|safecopy|safemap|ds/* reworked
  and extended.
- Minor fixes and general cleanup.
- TO-DO: Grant ids should be generated and managed the way endpoints are to make
sure grant slots are never misreused.
2010-01-14 15:24:16 +00:00
Kees van Reeuwijk
5459f3a607 Removed a whole herd of unused variables.
Some other cleanup.
2010-01-14 13:53:12 +00:00
Cristiano Giuffrida
d1fd04e72a Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.

SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic 
registration / deregistration of system services.

VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.

RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 01:20:42 +00:00
David van Moolenbroek
ac9ab099c8 General cleanup:
- clean up kernel section of minix/com.h somewhat
- remove ALLOCMEM and VM_ALLOCMEM calls
- remove non-safecopy and minix-vmd support from Inet
- remove SYS_VIRVCOPY and SYS_PHYSVCOPY calls
- remove obsolete segment encoding in SYS_SAFECOPY*
- remove DEVCTL call, svrctl(FSDEVUNMAP), map_driverX
- remove declarations of unimplemented svrctl requests
- remove everything related to swapping to disk
- remove floppysetup.sh
- remove traces of rescue device
- update DESCRIBE.sh with new devices
- some other small changes
2010-01-05 19:39:27 +00:00
Cristiano Giuffrida
1f5841c8ed Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
  1. SEF Ping. The event occurs every time RS sends a ping to figure out
  whether a system process is still alive. The default callback implementation
  provided by SEF is to notify RS back to let it know the process is alive
  and kicking.
  2. SEF Live update. The event occurs every time RS sends a prepare to update
  message to let a system process know an update is available and to prepare
  for it. The live update support is very basic for now. SEF only deals with
  verifying if the prepare state can be supported by the process, dumping the
  state for debugging purposes, and providing an event-driven programming
  model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
  * PM notify messages primarily used at shutdown.
  * SYSTEM notify messages primarily used for signals.
  * CLOCK notify messages used for system alarms.
  * Debug messages. IS could still be in charge of fkey handling but would
  forward the debug message to the target process (e.g. PM, if the user
  requested debug information about PM). SEF would then catch the message and
  do nothing unless the process has registered an appropriate callback to
  deal with the event. This simplifies the programming model to print debug
  information, avoids duplicating code, and reduces the effort to print
  debug information.

SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.

RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
  * When an update command is issued (via "service update *"), RS notifies the
  target system process to prepare for a specific update state.
  * If the process doesn't respond back in time, the update is aborted.
  * When the process responds back, RS kills it and marks it for refreshing.
  * The process is then automatically restarted as for a buggy process and can
  start running again.
  * Live update is currently prototyped as a controlled failure.
2009-12-21 14:12:21 +00:00
Tomas Hruby
4dad30937b Removed macros that depend on NOTIFY_FROM from servers and drivers. They
determine the information defined by these macros from the m_source field of the
notify message.
2009-09-29 18:47:56 +00:00
Ben Gras
51596bc608 print who the message is from. 2009-04-02 11:56:50 +00:00
Ben Gras
70f1f28439 dynamic HZ, library stacktrace 2008-12-11 14:54:42 +00:00
Philip Homburg
33d31720a5 Use ds_retrieve_u32 to get the endpoint of inet and of the ethernet drivers. 2007-05-02 11:30:16 +00:00
Philip Homburg
0bd4c5ee7d Initial convertion to asynchronous sends for communicating with ethernet
drivers.
2007-04-23 14:49:20 +00:00
Philip Homburg
66f9a5f508 Do not abort/panic when an ethernet driver does something unexpected. 2006-08-28 12:59:36 +00:00
Philip Homburg
04b478f177 More stack for tcpd.
Safecopies renders the NWIOQUERYPARAM ioctl useless. This functionality
is now replaced with /dev/ipstat. Write the request to the device and
read the answer in one read request.
2006-07-13 13:19:48 +00:00
Jorrit Herder
021e3234d8 Jorrit's ... "progress?" 2006-03-10 16:10:05 +00:00
Philip Homburg
724813fdce Prelim commit for ethernet driver crash recovery. 2005-10-21 11:51:45 +00:00
Philip Homburg
2f56b477c0 Fixed mq leak. 2005-08-08 15:49:16 +00:00
Jorrit Herder
3f28baac83 Disabled comments from FXP driver with #define VERBOSE 0.
Fixed all troubles reported at shutdown.
No more illegal FS calls by dead processes.
2005-08-03 16:58:22 +00:00
Jorrit Herder
375f6f8754 Miscellaneous cleanups. 2005-08-03 11:53:36 +00:00
Jorrit Herder
f44725b777 Created new devctl system call to FS. Moved dmap.h header to include/minix/.
Various updates to support dynamically starting servers and suppress output.
2005-08-02 15:29:17 +00:00
Jorrit Herder
808202ee30 Removed printing functionality from IS server.
This functionality is now provided by the LOG driver.
2005-07-21 18:31:27 +00:00
Jorrit Herder
570eac1f53 Renamed system library functionality.
Updated debug dumps of IS server.
2005-07-14 15:16:12 +00:00
Philip Homburg
0f26898f82 New inet with partial select implementation 2005-06-28 15:19:58 +00:00
Jorrit Herder
c281867f46 Fixed bug relating to FS and MEMORY during startup;
Relocated some syslib functions to utils library;
Changed location of 'Multiuser startup ..." echo in /etc/rc
2005-06-06 09:30:44 +00:00
Jorrit Herder
e782e76944 Created new findproc system call to the PM (to replace similar kernel
functionality). Currently working on memory allocation (not yet finished).
2005-06-02 12:43:21 +00:00
Jorrit Herder
6d23f072f3 Cleaned up src/lib/utils library. Renamed server_ functions to more logical
names. All system processes can now either use panic() or report() from
libutils, or redefine their own function. Assertions are done via the standard
<assert.h> functionality.
2005-06-01 14:31:00 +00:00
Jorrit Herder
0899f82ab2 Fixed some minor issues with the NOTIFY call. 2005-05-24 14:35:58 +00:00
Ben Gras
9865aeaa79 Initial revision 2005-04-21 14:53:53 +00:00