Previously, reading from or writing to a character device would not
update the file position on the corresponding filp object. Performing
this update correctly is not trivial: during and after the I/O
operation, the filp object must not be locked. Ideally, read/write
requests on a filp that is already involved in a read/write operation,
should be queued. For now, we optimistically update the file position
at the start of the I/O; this works under the assumptions listed in
the corresponding comment.
Change-Id: I172a61781850423709924390ae3df1f2d1f94707
The main purpose of this patch is to fix handling of unpause calls
from PM while another call is ongoing. The solution to this problem
sparked a full revision of the threading model, consisting of a large
number of related changes:
- all active worker threads are now always associated with a process,
and every process has at most one active thread working for it;
- the process lock is always held by a process's worker thread;
- a process can now have both normal work and postponed PM work
associated to it;
- timer expiry and non-postponed PM work is done from the main thread;
- filp garbage collection is done from a thread associated with VFS;
- reboot calls from PM are now done from a thread associated with PM;
- the DS events handler is protected from starting multiple threads;
- support for a system worker thread has been removed;
- the deadlock recovery thread has been replaced by a parameter to the
worker_start() function; the number of worker threads has
consequently been increased by one;
- saving and restoring of global but per-thread variables is now
centralized in worker_suspend() and worker_resume(); err_code is now
saved and restored in all cases;
- the concept of jobs has been removed, and job_m_in now points to a
message stored in the worker thread structure instead;
- the PM lock has been removed;
- the separate exec lock has been replaced by a lock on the VM
process, which was already being locked for exec calls anyway;
- PM_UNPAUSE is now processed as a postponed PM request, from a thread
associated with the target process;
- the FP_DROP_WORK flag has been removed, since it is no longer more
than just an optimization and only applied to processes operating on
a pipe when getting killed;
- assignment to "fp" now takes place only when obtaining new work in
the main thread or a worker thread, when resuming execution of a
thread, and in the special case of exiting processes during reboot;
- there are no longer special cases where the yield() call is used to
force a thread to run.
Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
The main motivation for this change is that only Loris supports
multithreading, and Loris supports dynamic thread allocation, so the
number of supported threads can be implemented as a bit flag (i.e.,
either 1 or "at least as many as VFS has"). The ABI break obviates the
need to support file system versioning at this time, and several
other aspects are better implemented as flags as well. Other changes:
- replace peek/bpeek test upon mount with FS flag as well;
- mark libsffs as 64-bit file size capable;
- remove old (3.2.1) getdents support.
Change-Id: I313eace9c50ed816656c31cd47d969033d952a03
. libc: add vfs_mmap, a way for vfs to initiate mmap()s.
This is a good special case to have as vfs is a slightly
different client from regular user processes. It doesn't do it
for itself, and has the dev & inode info already so the callback
to VFS for the lookup isn't necessary. So it has different info
to have to give to VM.
. libc: also add minix_mmap64() that accepts a 64-bit offset, even
though our off_t is still 32 bit now.
. On exec() time, try to mmap() in the executable if available.
(It is not yet available in this commit.)
. To support mmap(), add do_vm_call that allows VM to lookup
(to ino+dev), do i/o from and close FD's on behalf of other
processes.
Change-Id: I831551e45a6781c74313c450eb9c967a68505932
m_out is shared between threads as the reply message, and it can happen
results get overwritten by another thread before the reply is sent. This
change
. makes m_out local to the message handling function,
declared on the stack of the caller
. forces callers of reply() to give it a message, or
declare the reply message has no significant fields except
for the return code by calling replycode()
Change-Id: Id06300083a63c72c00f34f86a5c7d96e4bbdf9f6
REQ_PEEK behaves just like REQ_READ except that it does not copy
data anywhere, just obtains the blocks from the FS into the cache.
To be used by the future mmap implementation.
Change-Id: I1b56de304f0a7152b69a72c8962d04258adb44f9
Because pipes have no file position. VFS maintained (file) offsets into a
buffer internal to PFS and stored them in vnodes for simplicity, mixing
the responsibilities of filp and vnode objects.
With this patch PFS ignores the position field in REQ_READ and REQ_WRITE
requests making VFS' job a lot simpler.
.sync and fsync used unnecessarily restrictive locking type
.fsync violated locking order by obtaining a vmnt lock after a filp lock
.fsync contained a TOCTOU bug
.new_node violated locking rules (didn't upgrade lock upon file creation)
.do_pipe used unnecessarily restrictive locking type
.always lock pipes exclusively; even a read operation might require to do
a write on a vnode object (update pipe size)
.when opening a file with O_TRUNC, upgrade vnode lock when truncating
.utime used unnecessarily restrictive locking type
.path parsing:
.always acquire VMNT_WRITE or VMNT_EXCL on vmnt and downgrade to
VMNT_READ if that was what was actually requested. This prevents the
following deadlock scenario:
thread A:
lock_vmnt(vmp, TLL_READSER);
lock_vnode(vp, TLL_READSER);
upgrade_vmnt_lock(vmp, TLL_WRITE);
thread B:
lock_vmnt(vmp, TLL_READ);
lock_vnode(vp, TLL_READSER);
thread A will be stuck in upgrade_vmnt_lock and thread B is stuck in
lock_vnode. This happens when, for example, thread A tries create a
new node (open.c:new_node) and thread B tries to do eat_path to
change dir (stadir.c:do_chdir). When the path is being resolved, a
vnode is always locked with VNODE_OPCL (TLL_READSER) and then
downgraded to VNODE_READ if read-only is actually requested. Thread
A locks the vmnt with VMNT_WRITE (TLL_READSER) which still allows
VMNT_READ locks. Thread B can't acquire a lock on the vnode because
thread A has it; Thread A can't upgrade its vmnt lock to VMNT_WRITE
(TLL_WRITE) because thread B has a VMNT_READ lock on it.
By serializing vmnt locks during path parsing, thread B can only
acquire a lock on vmp when thread A has completely finished its
operation.
The check_bsf() macro uses assert(mutex_trylock(&bsf_lock)) and
assumes bsf_lock is locked afterwards. This breaks when compiling
with NOASSERTS="yes". Also: macro to function transition.
By decoupling synchronous drivers from VFS, we are a big step closer to
supporting driver crashes under all circumstances. That is, VFS can't
become stuck on IPC with a synchronous driver (e.g., INET) and can
recover from crashing block drivers during open/close/ioctl or during
communication with an FS.
In order to maintain serialized communication with a synchronous driver,
the communication is wrapped by a mutex on a per driver basis (not major
numbers as there can be multiple majors with identical endpoints). Majors
that share a driver endpoint point to a single mutex object.
In order to support crashes from block drivers, the file reopen tactic
had to be changed; first reopen files associated with the crashed
driver, then send the new driver endpoint to FSes. This solves a
deadlock between the FS and the block driver;
- VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it
after retrying the current request to the newly started driver.
- The block driver would refuse the retried request until all files
had been reopened.
- VFS would reopen files only after getting a reply from the initial
REQ_NEW_DRIVER.
When a character special driver crashes, all associated files have to
be marked invalid and closed (or reopened if flagged as such). However,
they can only be closed if a thread holds exclusive access to it. To
obtain exclusive access, the worker thread (which handles the new driver
endpoint event from DS) schedules a new job to garbage collect invalid
files. This way, we can signal the worker thread that was talking to the
crashed driver and will release exclusive access to a file associated
with the crashed driver and prevent the garbage collecting worker thread
from dead locking on that file.
Also, when a character special driver crashes, RS will unmap the driver
and remap it upon restart. During unmapping, associated files are marked
invalid instead of waiting for an endpoint up event from DS, as that
event might come later than new read/write/select requests and thus
cause confusion in the freshly started driver.
When locking a filp, the usage counters are no longer checked. The usage
counter can legally go down to zero during filp invalidation while there
are locks pending.
DS events are handled by a separate worker thread instead of the main
thread as reopening files could lead to another crash and a stuck thread.
An additional worker thread is then necessary to unlock it.
Finally, with everything asynchronous a race condition in do_select
surfaced. A select entry was only marked in use after succesfully sending
initial select requests to drivers and having to wait. When multiple
select() calls were handled there was opportunity that these entries
were overwritten. This had as effect that some select results were
ignored (and select() remained blocking instead if returning) or do_select
tried to access filps that were not present (because thrown away by
secondary select()). This bug manifested itself with sendrecs, but was
very hard to reproduce. However, it became awfully easy to trigger with
asynsends only.
By making m_in job local (i.e., each job has its own copy of m_in instead
of refering to the global m_in) we don't have to store and restore m_in
on every thread yield. This reduces overhead. Moreover, remove the
assumption that m_in is preserved. Do_XXX functions have to copy the
system call parameters as soon as possible and only pass those copies to
other functions.
Furthermore, this patch cleans up some code and uses better types in a lot
of places.
file descriptor passing, PFS does some back calls to VFS. For example, to
verify the validity of a path provided by a process and to tell VFS it must
copy file descriptors from one process to another.
this change
- makes panic() variadic, doing full printf() formatting -
no more NO_NUM, and no more separate printf() statements
needed to print extra info (or something in hex) before panicing
- unifies panic() - same panic() name and usage for everyone -
vm, kernel and rest have different names/syntax currently
in order to implement their own luxuries, but no longer
- throws out the 1st argument, to make source less noisy.
the panic() in syslib retrieves the server name from the kernel
so it should be clear enough who is panicing; e.g.
panic("sigaction failed: %d", errno);
looks like:
at_wini(73130): panic: sigaction failed: 0
syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
- throws out report() - printf() is more convenient and powerful
- harmonizes/fixes the use of panic() - there were a few places
that used printf-style formatting (didn't work) and newlines
(messes up the formatting) in panic()
- throws out a few per-server panic() functions
- cleans up a tie-in of tty with panic()
merging printf() and panic() statements to be done incrementally.
- clean up kernel section of minix/com.h somewhat
- remove ALLOCMEM and VM_ALLOCMEM calls
- remove non-safecopy and minix-vmd support from Inet
- remove SYS_VIRVCOPY and SYS_PHYSVCOPY calls
- remove obsolete segment encoding in SYS_SAFECOPY*
- remove DEVCTL call, svrctl(FSDEVUNMAP), map_driverX
- remove declarations of unimplemented svrctl requests
- remove everything related to swapping to disk
- remove floppysetup.sh
- remove traces of rescue device
- update DESCRIBE.sh with new devices
- some other small changes
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
case of directories extended by subfilesystem. Rely on subfilesystem to
do read size truncating and return actual i/o size. This fixes bug 81 in
gforge, and unbreaks test 23.
Select now returns such a filedescriptor as ready (instead of EBADF).
Reply before dev_up in FSSIGNON to avoid the problem that a DEV_OPEN
request is received by a driver that expects a reply from the FSSIGNON.
bugfixes:
SYSTEM:
. removed
rc->p_priv->s_flags = 0;
for the priv struct shared by all user processes in get_priv(). this
should only be done once. doing a SYS_PRIV_USER in sys_privctl()
caused the flags of all user processes to be reset, so they were no
longer PREEMPTIBLE. this happened when RS executed a policy script.
(this broke test1 in the test set)
VFS/MFS:
. chown can change the mode of a file, and chmod arguments are only
part of the full file mode so the full filemode is slightly magic.
changed these calls so that the final modes are returned to VFS, so
that the vnode can be kept up-to-date.
(this broke test11 in the test set)
MFS:
. lookup() checked for sizeof(string) instead of sizeof(user_path),
truncating long path names
(caught by test 23)
. truncate functions neglected to update ctime
(this broke test16)
VFS:
. corner case of an empty filename lookup caused fields of a request
not to be filled in in the lookup functions, not making it clear
that the lookup had failed, causing messages to garbage processes,
causing strange failures.
(caught by test 30)
. trust v_size in vnode when doing reads or writes on non-special
files, truncating i/o where necessary; this is necessary for pipes,
as MFS can't tell when a pipe has been truncated without it being
told explicitly each time.
when the last reader/writer on a pipe closes, tell FS about
the new size using truncate_vn().
(this broke test 25, among others)
. permission check for chdir() had disappeared; added a
forbidden() call
(caught by test 23)
new code, shouldn't change anything:
. introduced RTS_SET, RTS_UNSET, and RTS_ISSET macro's, and their
LOCK variants. These macros set and clear the p_rts_flags field,
causing a lot of duplicated logic like
old_flags = rp->p_rts_flags; /* save value of the flags */
rp->p_rts_flags &= ~NO_PRIV;
if (old_flags != 0 && rp->p_rts_flags == 0) lock_enqueue(rp);
to change into the simpler
RTS_LOCK_UNSET(rp, NO_PRIV);
so the macros take care of calling dequeue() and enqueue() (or lock_*()),
as the case may be). This makes the code a bit more readable and a
bit less fragile.
. removed return code from do_clocktick in CLOCK as it currently
never replies
. removed some debug code from VFS
. fixed grant debug message in device.c
preemptive checks, tests, changes:
. added return code checks of receive() to SYSTEM and CLOCK
. O_TRUNC should never arrive at MFS (added sanity check and removed
O_TRUNC code)
. user_path declared with PATH_MAX+1 to let it be null-terminated
. checks in MFS to see if strings passed by VFS are null-terminated
IS:
. static irq name table thrown out
