Commit graph

42 commits

Author SHA1 Message Date
Lionel Sambuc
37598dccf1 Aligning dev_t to 64bits.
Change-Id: I630f72f8530dd4aaf05c35ca23683ae12c9f8328
2014-03-02 12:28:32 +01:00
David van Moolenbroek
24ec0d73b5 Clean up interface to PM and VFS
- introduce new call numbers, names, and field aliases;
- initialize request messages to zero for all ABI calls;
- format callnr.h in the same way as com.h;
- redo call tables in both servers;
- remove param.h namespace pollution in the servers;
- make brk(2) go to VM directly, rather than through PM;
- remove obsolete BRK, UTIME, and WAIT calls;
- clean up path copying routine in VFS;
- move remaining system calls from libminlib to libc;
- correct some errno-related mistakes in libc routines.

Change-Id: I2d8ec5d061cd7e0b30c51ffd77aa72ebf84e2565
2014-03-01 09:05:01 +01:00
David van Moolenbroek
2c8310fce6 VFS: store m_out as part of worker thread state
There is no need to pass pointers around when there is a structure
available that already stores other similar state, such as m_in.

Change-Id: I3164c5c55c71f443688103d1f0756c086eb05974
2014-03-01 09:05:00 +01:00
David van Moolenbroek
e5cc85fdc4 Extend dupfrom(2) into copyfd(2)
This single function allows copying file descriptors from and to
processes, and closing a previously copied remote file descriptor.
This function replaces the five FD-related UDS backcalls. While it
limits the total number of in-flight file descriptors to OPEN_MAX,
this change greatly improves crash recovery support of UDS, since all
in-flight file descriptors will be closed instead of keeping them
open indefinitely (causing VFS to crash on system shutdown). With the
new copyfd call, UDS becomes simpler, and the concept of filps is no
longer exposed outside of VFS.

This patch also moves the checkperms(2) stub into libminlib, thus
fully abstracting away message details of VFS communication from UDS.

Change-Id: Idd32ad390a566143c8ef66955e5ae2c221cff966
2014-03-01 09:04:58 +01:00
David van Moolenbroek
50685cbec3 VFS: better dupfrom(2) deadlock detection
Change-Id: I29f00075698888c7c8ca60b47ab82fba8c606f4e
2014-03-01 09:04:58 +01:00
David van Moolenbroek
b003ed0929 UDS: split off from PFS
Change-Id: I769cbd64aa6e5e85a797caf0f8bbb4c20e145263
2014-03-01 09:04:57 +01:00
David van Moolenbroek
dba2d1f8b4 VFS: add dupfrom(2) call
This call copies a file descriptor from a remote process into the
calling process. The call is for the VND driver only, and in the
future, ACLs will prevent any other process from using this call.

Change-Id: Ib16fdd1f1a12cb38a70d7e441dad91bc86898f6d
2014-03-01 09:04:54 +01:00
David van Moolenbroek
665198b4c2 Rewrite character driver protocol
As a side effect, remove the clone style, as the normal device style
supports device cloning now.

Change-Id: Ie82d1ef0385514a04a8faa139129a617895780b5
2014-03-01 09:04:52 +01:00
David van Moolenbroek
87337273e4 Remove support for reopening character devices
Previously, VFS would reopen a character device after a driver crash
if the associated file descriptor was opened with the O_REOPEN flag.
This patch removes support for this feature. The code was complex,
full of uncovered corner cases, and hard to test. Moreover, it did not
actually hide the crash from user applications: they would get an
error code to indicate that something went wrong, and have to decide
based on the nature of the underlying device how to continue.

- remove support for O_REOPEN, and make playwave(1) reopen its device;
- remove support for the DEV_REOPEN protocol message;
- remove all code in VFS related to reopening character devices;
- no longer change VFS filp reference count and FD bitmap upon filp
  invalidation; instead, make get_filp* fail all calls on invalidated
  FDs except when obtained with the locktype VNODE_OPCL which is used
  by close_fd only;
- remove the VFS fproc file descriptor bitmap entirely, returning to
  the situation that a FD is in use if its slot points to a filp; use
  FILP_CLOSED as single means of marking a filp as invalidated.

Change-Id: I34f6bc69a036b3a8fc667c1f80435ff3af56558f
2014-03-01 09:04:52 +01:00
David van Moolenbroek
a4277506a2 VFS: rework device code
- block the calling thread on character device close;
- fully separate block and character open/close routines;
- reuse generic open/close code for the cloning case;
- zero all messages to drivers before filling them;
- use appropriate types for major/minor device numbers.

Change-Id: Ia90e6fe5688f212f835c5ee1bfca831cb249cf51
2014-03-01 09:04:52 +01:00
David van Moolenbroek
f6915d3dee Make PFS backcalls regular VFS calls
- prefix them with VFS_ as they are going to VFS;
- give these calls normal call numbers;
- give them their own set of message field aliases;
- also make do_mapdriver a regular call.

Change-Id: I2140439f288b06d699a1f65438bd8306509b259e
2014-03-01 09:04:52 +01:00
David van Moolenbroek
723e51327f VFS: worker thread model overhaul
The main purpose of this patch is to fix handling of unpause calls
from PM while another call is ongoing. The solution to this problem
sparked a full revision of the threading model, consisting of a large
number of related changes:

- all active worker threads are now always associated with a process,
  and every process has at most one active thread working for it;
- the process lock is always held by a process's worker thread;
- a process can now have both normal work and postponed PM work
  associated to it;
- timer expiry and non-postponed PM work is done from the main thread;
- filp garbage collection is done from a thread associated with VFS;
- reboot calls from PM are now done from a thread associated with PM;
- the DS events handler is protected from starting multiple threads;
- support for a system worker thread has been removed;
- the deadlock recovery thread has been replaced by a parameter to the
  worker_start() function; the number of worker threads has
  consequently been increased by one;
- saving and restoring of global but per-thread variables is now
  centralized in worker_suspend() and worker_resume(); err_code is now
  saved and restored in all cases;
- the concept of jobs has been removed, and job_m_in now points to a
  message stored in the worker thread structure instead;
- the PM lock has been removed;
- the separate exec lock has been replaced by a lock on the VM
  process, which was already being locked for exec calls anyway;
- PM_UNPAUSE is now processed as a postponed PM request, from a thread
  associated with the target process;
- the FP_DROP_WORK flag has been removed, since it is no longer more
  than just an optimization and only applied to processes operating on
  a pipe when getting killed;
- assignment to "fp" now takes place only when obtaining new work in
  the main thread or a worker thread, when resuming execution of a
  thread, and in the special case of exiting processes during reboot;
- there are no longer special cases where the yield() call is used to
  force a thread to run.

Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2014-02-18 11:25:03 +01:00
Thomas Veerman
32e916ad53 VFS: use 64-bit file offsets in all requests
Change-Id: I735c4068135474aff2c397f4bc9fb147a618b453
2014-02-18 11:25:01 +01:00
Ben Gras
c8f3b10909 fix a few more minix specific warnings
. also disable stack protection feature for gcc,
	  causes build errors for pkgsrc gcc on minix

Change-Id: I1c6e2bcb4d948098d642543d7b2711284ee55c72
2013-08-27 16:16:03 +00:00
Ben Gras
456359aa72 retire 64-bit conversion functions
Change-Id: Ib6b81403f877c363a286c654e0524fa1cb781b80
2013-06-24 16:50:57 +02:00
Ben Gras
33a7ac7557 vfs: mmap support
. libc: add vfs_mmap, a way for vfs to initiate mmap()s.
	  This is a good special case to have as vfs is a slightly
	  different client from regular user processes. It doesn't do it
	  for itself, and has the dev & inode info already so the callback
	  to VFS for the lookup isn't necessary. So it has different info
	  to have to give to VM.
	. libc: also add minix_mmap64() that accepts a 64-bit offset, even
	  though our off_t is still 32 bit now.
	. On exec() time, try to mmap() in the executable if available.
	  (It is not yet available in this commit.)
	. To support mmap(), add do_vm_call that allows VM to lookup
	  (to ino+dev), do i/o from and close FD's on behalf of other
	  processes.

Change-Id: I831551e45a6781c74313c450eb9c967a68505932
2013-05-31 15:42:00 +00:00
Ben Gras
2d2a1a077d panic: declare as printf-style-checked
. and related fixes

Change-Id: I5131ac57dc53d8aec8d421a34c5ceea383404d7a
2013-05-31 13:35:25 +00:00
Ben Gras
cef94e096e vfs: make m_out non-global
m_out is shared between threads as the reply message, and it can happen
results get overwritten by another thread before the reply is sent. This
change

	. makes m_out local to the message handling function,
	  declared on the stack of the caller
	. forces callers of reply() to give it a message, or
	  declare the reply message has no significant fields except
	  for the return code by calling replycode()

Change-Id: Id06300083a63c72c00f34f86a5c7d96e4bbdf9f6
2013-04-12 23:40:38 +00:00
Thomas Veerman
2b90964e33 VFS: don't garbage collect if file is already closed 2013-02-21 10:29:08 +00:00
Thomas Veerman
7c8b3ddfed VFS: fix locking bugs
.sync and fsync used unnecessarily restrictive locking type
.fsync violated locking order by obtaining a vmnt lock after a filp lock
.fsync contained a TOCTOU bug
.new_node violated locking rules (didn't upgrade lock upon file creation)
.do_pipe used unnecessarily restrictive locking type
.always lock pipes exclusively; even a read operation might require to do
 a write on a vnode object (update pipe size)
.when opening a file with O_TRUNC, upgrade vnode lock when truncating
.utime used unnecessarily restrictive locking type
.path parsing:
  .always acquire VMNT_WRITE or VMNT_EXCL on vmnt and downgrade to
   VMNT_READ if that was what was actually requested. This prevents the
   following deadlock scenario:
   thread A:
     lock_vmnt(vmp, TLL_READSER);
     lock_vnode(vp, TLL_READSER);
     upgrade_vmnt_lock(vmp, TLL_WRITE);

   thread B:
     lock_vmnt(vmp, TLL_READ);
     lock_vnode(vp, TLL_READSER);

   thread A will be stuck in upgrade_vmnt_lock and thread B is stuck in
   lock_vnode. This happens when, for example, thread A tries create a
   new node (open.c:new_node) and thread B tries to do eat_path to
   change dir (stadir.c:do_chdir). When the path is being resolved, a
   vnode is always locked with VNODE_OPCL (TLL_READSER) and then
   downgraded to VNODE_READ if read-only is actually requested. Thread
   A locks the vmnt with VMNT_WRITE (TLL_READSER) which still allows
   VMNT_READ locks. Thread B can't acquire a lock on the vnode because
   thread A has it; Thread A can't upgrade its vmnt lock to VMNT_WRITE
   (TLL_WRITE) because thread B has a VMNT_READ lock on it.

   By serializing vmnt locks during path parsing, thread B can only
   acquire a lock on vmp when thread A has completely finished its
   operation.
2013-01-11 09:18:35 +00:00
Thomas Veerman
992799b91f VFS: make all IPC asynchronous
By decoupling synchronous drivers from VFS, we are a big step closer to
supporting driver crashes under all circumstances. That is, VFS can't
become stuck on IPC with a synchronous driver (e.g., INET) and can
recover from crashing block drivers during open/close/ioctl or during
communication with an FS.

In order to maintain serialized communication with a synchronous driver,
the communication is wrapped by a mutex on a per driver basis (not major
numbers as there can be multiple majors with identical endpoints). Majors
that share a driver endpoint point to a single mutex object.

In order to support crashes from block drivers, the file reopen tactic
had to be changed; first reopen files associated with the crashed
driver, then send the new driver endpoint to FSes. This solves a
deadlock between the FS and the block driver;
  - VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it
    after retrying the current request to the newly started driver.
  - The block driver would refuse the retried request until all files
    had been reopened.
  - VFS would reopen files only after getting a reply from the initial
    REQ_NEW_DRIVER.

When a character special driver crashes, all associated files have to
be marked invalid and closed (or reopened if flagged as such). However,
they can only be closed if a thread holds exclusive access to it. To
obtain exclusive access, the worker thread (which handles the new driver
endpoint event from DS) schedules a new job to garbage collect invalid
files. This way, we can signal the worker thread that was talking to the
crashed driver and will release exclusive access to a file associated
with the crashed driver and prevent the garbage collecting worker thread
from dead locking on that file.

Also, when a character special driver crashes, RS will unmap the driver
and remap it upon restart. During unmapping, associated files are marked
invalid instead of waiting for an endpoint up event from DS, as that
event might come later than new read/write/select requests and thus
cause confusion in the freshly started driver.

When locking a filp, the usage counters are no longer checked. The usage
counter can legally go down to zero during filp invalidation while there
are locks pending.

DS events are handled by a separate worker thread instead of the main
thread as reopening files could lead to another crash and a stuck thread.
An additional worker thread is then necessary to unlock it.

Finally, with everything asynchronous a race condition in do_select
surfaced. A select entry was only marked in use after succesfully sending
initial select requests to drivers and having to wait. When multiple
select() calls were handled there was opportunity that these entries
were overwritten. This had as effect that some select results were
ignored (and select() remained blocking instead if returning) or do_select
tried to access filps that were not present (because thrown away by
secondary select()). This bug manifested itself with sendrecs, but was
very hard to reproduce. However, it became awfully easy to trigger with
asynsends only.
2012-09-17 11:01:45 +00:00
Thomas Veerman
77dbd766c1 VFS: Use safe string copy functions 2012-07-16 10:57:43 +00:00
Thomas Veerman
b6ff38065f VFS: release what can be released
Only attempt to release blocked processes that are blocked. There is
no use in trying to find more blocked processes than we know that are
blocked (on a pipe).
2012-04-27 08:51:02 +00:00
Thomas Veerman
db8198d99d VFS: use S_IS* macros 2012-04-27 08:49:38 +00:00
Thomas Veerman
96bbc5da3e VFS: I_PIPE is redundant
Also, use S_IS* macros instead of manual comparison.
2012-04-27 08:49:38 +00:00
Thomas Veerman
26ec619a30 VFS: fix filp reuse race
Pipes consist of two filps (read filp and write filp) and a shared
vnode. When the writer leaves the filp reference count drops to
zero and subsequent find_filp()s should not find the filp when a
reader looks for it and the reader gets EOF. However, the pipe()
system call tries to find two filps, marks them in use, and only
after a successful node creation on PFS, overwrites the shared
vnode with the new vnode. Consequently, this leaves a small window
where a just closed 'pipe write filp' gets reused and marked as
present, before becoming the actual new 'pipe write filp' for a new
pipe. A reader for the old pipe will think a writer is present and
wait for that writer to write something or to leave; both actions
should revive the suspended reader. This will never happen and the
reader will be stuck forever.
2012-04-13 13:22:57 +00:00
Thomas Veerman
8f55767619 VFS: make m_in job local
By making m_in job local (i.e., each job has its own copy of m_in instead
of refering to the global m_in) we don't have to store and restore m_in
on every thread yield. This reduces overhead. Moreover, remove the
assumption that m_in is preserved. Do_XXX functions have to copy the
system call parameters as soon as possible and only pass those copies to
other functions.

Furthermore, this patch cleans up some code and uses better types in a lot
of places.
2012-04-13 12:50:38 +00:00
Ben Gras
7336a67dfe retire PUBLIC, PRIVATE and FORWARD 2012-03-25 21:58:14 +02:00
Ben Gras
6a73e85ad1 retire _PROTOTYPE
. only good for obsolete K&R support
	. also remove a stray ansi.h and the proto cmd
2012-03-25 16:17:10 +02:00
Thomas Veerman
80c4685324 VFS: replace VFS with AVFS 2012-02-13 16:53:21 +00:00
David van Moolenbroek
b4d909d415 Split block/character protocols and libdriver
This patch separates the character and block driver communication
protocols. The old character protocol remains the same, but a new
block protocol is introduced. The libdriver library is replaced by
two new libraries: libchardriver and libblockdriver. Their exposed
API, and drivers that use them, have been updated accordingly.
Together, libbdev and libblockdriver now completely abstract away
the message format used by the block protocol. As the memory driver
is both a character and a block device driver, it now implements its
own message loop.

The most important semantic change made to the block protocol is that
it is no longer possible to return both partial results and an error
for a single transfer. This simplifies the interaction between the
caller and the driver, as the I/O vector no longer needs to be copied
back. Also, drivers are now no longer supposed to decide based on the
layout of the I/O vector when a transfer should be cut short. Put
simply, transfers are now supposed to either succeed completely, or
result in an error.

After this patch, the state of the various pieces is as follows:
- block protocol: stable
- libbdev API: stable for synchronous communication
- libblockdriver API: needs slight revision (the drvlib/partition API
  in particular; the threading API will also change shortly)
- character protocol: needs cleanup
- libchardriver API: needs cleanup accordingly
- driver restarts: largely unsupported until endpoint changes are
  reintroduced

As a side effect, this patch eliminates several bugs, hacks, and gcc
-Wall and -W warnings all over the place. It probably introduces a
few new ones, too.

Update warning: this patch changes the protocol between MFS and disk
drivers, so in order to use old/new images, the MFS from the ramdisk
must be used to mount all file systems.
2011-11-23 14:06:37 +01:00
David van Moolenbroek
c51cd5fe91 Server/driver protocols: no longer allow third-party copies.
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.

From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:

- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
  when setting REP_ENDPT, matching requests in CANCEL calls, getting
  DEV_SELECT flags, and retrieving of the real user process's endpoint
  in DEV_OPEN.

The changes in this patch are binary backward compatible.
2011-04-11 17:35:05 +00:00
Dirk Vogt
9ed280d1ec decouple file system server start/termination from mount/umount 2010-11-23 19:34:56 +00:00
Thomas Veerman
13ef7f1f38 Prepare VFS to support back calls from PFS. For security reasons and to support
file descriptor passing, PFS does some back calls to VFS. For example, to
verify the validity of a path provided by a process and to tell VFS it must
copy file descriptors from one process to another.
2010-08-30 13:44:07 +00:00
Tomas Hruby
6e25ad8b0a Use of all NIL_* defines converted to NULL 2010-05-10 13:26:00 +00:00
Thomas Veerman
958b25be50 - Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
  the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
  functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
  the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
  - Several path lookup bugs in MFS.
  - A link can be too big for the path buffer.
  - A mountpoint can become inaccessible when the creation of a new inode
    fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
  suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
  unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
  named pipes. However, named pipes still reside on the (M)FS, as they are part
  of the file system on disk. To make this work VFS now has a concept of
  'mapped' inodes, which causes read, write, truncate and stat requests to be
  redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 20:27:14 +00:00
Philip Homburg
047cc090e4 Added filp_state for driver recovery and filp_select_flags to store select
state for character specials that use asynch I/O.
2008-02-22 14:19:23 +00:00
Philip Homburg
4b1cd8c0ec Return EIO if a filedescriptor cannot be re-opened after a driver restart.
Select now returns such a filedescriptor as ready (instead of EBADF). 
Reply before dev_up in FSSIGNON to avoid the problem that a DEV_OPEN
request is received by a driver that expects a reply from the FSSIGNON.
2007-08-15 12:53:52 +00:00
Philip Homburg
a116b3aa55 To return the right error, check first is an object is a directory (for
mkdir, rmdir/unlink, mknod), simply pipe code by using v_pipe_rd_pos and
v_pipe_wr_pos directly. Some cleanup work in open.c
2007-08-08 14:01:36 +00:00
Ben Gras
41e9fedf87 Mostly bugfixes of bugs triggered by the test set.
bugfixes:
 SYSTEM:
 . removed
        rc->p_priv->s_flags = 0;
   for the priv struct shared by all user processes in get_priv(). this
   should only be done once. doing a SYS_PRIV_USER in sys_privctl()
   caused the flags of all user processes to be reset, so they were no
   longer PREEMPTIBLE. this happened when RS executed a policy script.
   (this broke test1 in the test set)

 VFS/MFS:
 . chown can change the mode of a file, and chmod arguments are only
   part of the full file mode so the full filemode is slightly magic.
   changed these calls so that the final modes are returned to VFS, so
   that the vnode can be kept up-to-date.
   (this broke test11 in the test set)

 MFS:
 . lookup() checked for sizeof(string) instead of sizeof(user_path),
   truncating long path names
   (caught by test 23)
 . truncate functions neglected to update ctime
   (this broke test16)

 VFS:
 . corner case of an empty filename lookup caused fields of a request
   not to be filled in in the lookup functions, not making it clear
   that the lookup had failed, causing messages to garbage processes,
   causing strange failures.
   (caught by test 30)
 . trust v_size in vnode when doing reads or writes on non-special
   files, truncating i/o where necessary; this is necessary for pipes,
   as MFS can't tell when a pipe has been truncated without it being
   told explicitly each time.
   when the last reader/writer on a pipe closes, tell FS about
   the new size using truncate_vn().
   (this broke test 25, among others)
 . permission check for chdir() had disappeared; added a
   forbidden() call
   (caught by test 23)

new code, shouldn't change anything:
 . introduced RTS_SET, RTS_UNSET, and RTS_ISSET macro's, and their
   LOCK variants. These macros set and clear the p_rts_flags field,
   causing a lot of duplicated logic like

       old_flags = rp->p_rts_flags;            /* save value of the flags */
       rp->p_rts_flags &= ~NO_PRIV;
       if (old_flags != 0 && rp->p_rts_flags == 0) lock_enqueue(rp);

   to change into the simpler

       RTS_LOCK_UNSET(rp, NO_PRIV);

   so the macros take care of calling dequeue() and enqueue() (or lock_*()),
   as the case may be). This makes the code a bit more readable and a
   bit less fragile.
 . removed return code from do_clocktick in CLOCK as it currently
   never replies
 . removed some debug code from VFS
 . fixed grant debug message in device.c
 
preemptive checks, tests, changes:
 . added return code checks of receive() to SYSTEM and CLOCK
 . O_TRUNC should never arrive at MFS (added sanity check and removed
   O_TRUNC code)
 . user_path declared with PATH_MAX+1 to let it be null-terminated
 . checks in MFS to see if strings passed by VFS are null-terminated
 
 IS:
 . static irq name table thrown out
2007-02-01 17:50:02 +00:00
Philip Homburg
bafc45a309 First cut at 64-bit file offsets in block devices for mkfs/fsck. 2006-11-27 14:21:43 +00:00
Ben Gras
fa0ba56bc9 Merge of VFS by Balasz Gerofi with Minix trunk. 2006-10-25 13:40:36 +00:00
Renamed from servers/fs/filedes.c (Browse further)