This patch adds functionality to request an asynchronous notification
if some other process has send a message to it. We currently send a
SIGALRM to avoid any changes to core infrastructure of signal handling.
Ideally we should implement a separate signal for this. Currently there
is an obvious disadvantage of not being able to use SIGALRM with alarm,
if we are using this functionality.
Currently we only allow users to get and set number of queues. The
operation is always non blocking. There is no provision for non
blocking operation at the moment.
The queue sizes are set to MAX 256 by default. If a user changes the
attributes and sets the queue size or number of messages in a queue
to less than 256, it is the responsibility of the user to close any
queues which were opened with a descriptor greater than the value
currently set.
For example, by default queue sizes are 256. If 150 queues are opened
and then the user sets the number of queues to 32, all open descriptors
and queues from 32 to 150 must be closed. Note that descriptor number
allocation starts with zero and not one.
Fixed the following bugs:
1. Message priority was not set at all at two places
2. Limits check was not correct while returning error values
3. We are suppose to allow multiple users operate on the same queue
using a named descriptor. However any one user calling close before
the other would result in closing the queue even when other users
might be using it. Track number of users and close only if number of
users is zero. Yet to do functional tests for this, so this is untested,
but introduce it anyway at this juncture.
Implement message queues support for Minix.
Pending tasks:
Blocking or non blocking for send receive?
Sort by priority and time?
Test codes?
Bug fixes?
The CD now boots directly from the ISO 9660 filesystem instead of using
MBR partitioning with Minix file systems. This saves some space on the
CD and reduces memory requirements by some unknown amount as the root
ramdisk is completely eliminated.
The x86 hard drive image creation is also rewritten in the same
fashion.
The setup is modified to be more NetBSD-like (unpacking sets
tarballs instead of blindly copying the CD contents). Splitting MINIX
into sets is done in another commit due to it being a nightmare to
rebase.
Since MINIX lacks union mounts for now, a bunch of ramdisks are
generated at run-time to make parts of the filesystem writeable for the
CD. This solution isn't ideal, but it's enough for an installation CD.
Change-Id: Icbd9cca4dafebf7b42c345b107a17679a622d5cd
This patch adds support for the wait4 system call, and with that the
wait3 call as well. The implementation is absolutely minimal: only
user and system times of the exited child are returned (with all other
rusage fields left zero), and there is no support for tracers. Still,
this should cover the main use cases of wait4.
Change-Id: I7a04589a8423a23990ab39aa38e85d535556743a
- the userland call is now made to PM only, and PM relays the call to
other servers as appropriate; this is an ABI change that will
ultimately allow us to add proper support for wait3() and the like;
for the moment there is backward compatibility;
- the getrusage-specific kernel subcall has been removed, as it
provided only redundant functionality, and did not provide the means
to be extended correctly in the future - namely, allowing the kernel
to return different values depending on whether resource usage of
the caller (self) or its children was requested;
- VM is now told whether resource usage of the caller (self) or its
children is requested, and it refrains from filling in wrong values
for information it does not have;
- VM now uses the correct unit for the ru_maxrss values;
- VFS is cut out of the loop entirely, since it does not provide any
values at the moment; a comment explains how it should be readded.
Change-Id: I27b0f488437dec3d8e784721c67b03f2f853120f
- move MINIX3-specific files into minix/lib/libpuffs;
- resynchronize the remaining files with NetBSD code;
- remove a few unnecessary changes;
- put remaining MINIX3-specific changes in __minix blocks;
- sort out the source files being linked at all.
The result is that libpuffs now successfully links against FUSE
file system programs again. It can successfully mount, perform
some of the most basic operations, and unmount the file system.
Change-Id: Ieac220f7ad8c4d1fa293abda81967e8045be0bb4
Various generic file IOCTL calls should be processed by VFS rather
than individual drivers. For this reason, we rewrite them to use
fcntl(2) instead.
Change-Id: I38a5f3c7b21943a897114a51678a800f7e7f0a77
Currently, the userland ABI uses a single field ('user_sp') far
into the very large 'kinfo' structure on the shared kernel
information page. This precludes us from modifying or getting
rid of 'kinfo' in the future without breaking userland. This
patch adds a separate 'kuserinfo' structure to the kernel
information page, with only information that is part of the
userland ABI, in an extensible manner. Userland now uses this
field if it is present, and falls back to the old field if not.
Change-Id: Ib7b24b53a440f40a2edc28cdfa48447ac2179288
This change serves to reduce the clutter inside the top-level kerninfo
structure, and allows other ARM-specific values to be added on the
kernel page in one place.
Change-Id: I36a6aada9dbd1230b25014728be675d389088667
Please note that this information is for use by system services only!
The clock facility is not ready to be used directly by userland, and
thus, this kernel page extension is NOT part of the userland ABI.
For service programmers' convenience, change the prototype of the
getticks(3) to return the uptime clock value directly, since the call
can no longer fail.
Correct the sys_times(2) reply message to use the right field type
for the boot time.
Restructure the kernel internals a bit so as to have all the clock
stuff closer together.
Change-Id: Ifc050b7bd253aecbe46e3bd7d7cc75bd86e45555
Instead of importing an external _minix_kerninfo variable, any code
using the shared kernel page should now call get_minix_kerninfo(3).
Since this is the only logical name for such a function, rename the
previous get_minix_kerninfo call to ipc_minix_kerninfo.
Change-Id: I2e424b6fb55aa55d3da850187f1f7a0b7cbbf910
- do not allow live update for request and protocol free states if
there are any worker threads that have pending or active work;
- destroy all worker threads before such live updates and recreate
them afterwards, because transferring (the contents of) the
thread stacks is not an option at this time;
- recreate worker threads in the new instance only if they were
shut down before the state transfer, by letting RS provide the
original preparation state as initialization information.
Change-Id: I846225f5b7281f19e69175485f2c88a4b4891dc2
Since the heap is reconstructed upon state transfer, the old malloc
state is discarded. In order to avoid state transfer errors, we can
and in fact must discard the internal state of the malloc
implementation. This patch achieves this by using the sectionify
pass to mark the variables in the libminc malloc object as state that
must be skipped during state transfer.
Change-Id: Ie330f582c8bd45f37a878ea41fa0f9d4a18045e1
Due to changed VM internals, more elaborate preparation is required
before a live update with multiple components including VM can take
place. This patch adds the essential preparation infrastructure to
VM and adapts RS to make use of it. As a side effect, it is no
longer necessary to supply RS as the last component (if at all)
during the set-up of a multicomponent live update operation.
Change-Id: If069fd3f93f96f9d5433998e4615f861465ef448
The 'memory' service has holes in its data section, which causes
problems during state transfer. Since VM cannot handle page faults
during a multicomponent-with-VM live update, the state transfer must
ensure that no page faults occur during copying. Therefore, we now
query VM about the regions to copy, thus skipping holes. While the
solution is not ideal, it is sufficiently generic that it can be used
for the data section state transfer of all processes, and possibly
for state transfer of other regions in the future as well.
Change-Id: I2a71383a18643ebd36956c396fbd22c8fd137202
Edited by David van Moolenbroek to deallocate the guard page as well.
Note that while the new approach is better in theory (previously, the
hole could end up being filled by another allocated page), guard page
protection is now broken in practice, because VM does not support
setting specific page permissions (in this case, PROT_NONE).
Change-Id: I882624f5d152d3ebe82fca649cbad85aa4931780
VM used to call sendrec to send a boot-time RS_INIT reply to RS, but
RS could run into a pagefault at the same time, thus spawning a
message to VM, resulting in a deadlock. We resolve this situation by
making VM acknowledge RS_INIT asynchronously at boot time, while
retaining the synchronous sendrec for subsequent RS_INIT responses.
Change-Id: I3cb72d7f8d6b9bfdc59a85958ada739c37fa3bde
The following services have been updated to support stateful restarts:
- Drivers: tty
- Filesystems: isofs, mfs, pfs, libvtreefs-based file servers
- System servers: tty, ds, pm, vfs, vm
Change-Id: Ie84baa3ba1774047b3ae519808fe4116928edabb
Sanchayan Maity
