more /home fixes

This commit is contained in:
Ben Gras 2005-09-09 12:22:19 +00:00
parent 3dacb3e88b
commit 852a2c9832

View file

@ -12,6 +12,8 @@ LOCALRC=/usr/etc/rc.local
MYLOCALRC=/mnt/etc/rc.local
ROOTMB=16
ROOTSECTS="`expr $ROOTMB '*' 1024 '*' 2`"
USRKB="`cat /.usrkb`"
TOTALMB="`expr 3 + $USRKB / 1024 + $ROOTMB`"
PATH=/bin:/usr/bin
export PATH
@ -108,11 +110,11 @@ echo "MINIX 3 currently supports the following Ethernet cards. Please choose: "
echo ""
echo "0. No Ethernet card (no networking)"
echo "1. Intel Pro/100"
echo "2. Realtek 8139 based card"
echo "3. Realtek 8029 based card (emulated by Qemu)"
echo "4. NE2000, 3com 503 or WD based card (emulated by Bochs)"
echo "5. 3Com 501 or 3Com 509 based card"
echo "6. AMD LANCE (emulated by VMWare)"
echo "2. 3Com 501 or 3Com 509 based card"
echo "3. Realtek 8139 based card"
echo "4. Realtek 8029 based card (also emulated by Qemu)"
echo "5. NE2000, 3com 503 or WD based card (also emulated by Bochs)"
echo "6. AMD LANCE (also emulated by VMWare)"
echo "7. Different Ethernet card (no networking)"
echo ""
echo "You can always change your mind after the setup."
@ -128,17 +130,17 @@ do
case "$eth" in
0) step2="ok"; ;;
1) step2="ok"; driver=fxp; ;;
2) step2="ok"; driver=rtl8139; ;;
3) step2="ok"; driver=dp8390; driverargs="dp8390_arg='DPETH0=pci'"; ;;
4) step2="ok"; driver=dp8390; driverargs="dp8390_arg='DPETH0=240:9'";
2) step2="ok"; driver=dpeth; driverargs="#dpeth_arg='DPETH0=port:irq:memory'";
echo ""
echo "Note: After installing, edit $LOCALRC to the right configuration."
;;
3) step2="ok"; driver=rtl8139; ;;
4) step2="ok"; driver=dp8390; driverargs="dp8390_arg='DPETH0=pci'"; ;;
5) step2="ok"; driver=dp8390; driverargs="dp8390_arg='DPETH0=240:9'";
echo ""
echo "Note: After installing, edit $LOCALRC to the right configuration."
echo " chose option 4, the defaults for emulation by Bochs have been set."
;;
5) step2="ok"; driver=dpeth; driverargs="#dpeth_arg='DPETH0=port:irq:memory'";
echo ""
echo "Note: After installing, edit $LOCALRC to the right configuration."
;;
6) driver="lance"; driverargs="LANCE0=on"; step2="ok"; ;;
7) step2="ok"; ;;
*) warn "choose a number"
@ -151,15 +153,16 @@ step3=""
while [ "$step3" != ok ]
do
echo ""
echo " --- Step 2: Create a partition for MINIX 3, Or Reinstall ------------"
echo " --- Step 3: Create or Select a partition for MINIX 3 -------------------"
echo ""
echo "Now you need to create a MINIX 3 partition on your hard disk."
echo "It has to have $TOTALMB MB at the very least."
echo "You can also select one that's already there."
echo " "
echo "If you have an existing installation, reinstalling will let you"
echo "keep your current partitioning and subpartitioning, and overwrite"
echo "everything except your s3 subpartition (/home). If you want to"
echo "everything except your s1 subpartition (/home). If you want to"
echo "reinstall, select your existing minix partition."
echo " "
echo "Unless you are an expert, you are advised to use the automated"
@ -181,7 +184,8 @@ do
then
# Expert mode
echo -n "
MINIX needs one primary partition of about 250 MB for a full install.
MINIX needs one primary partition of $TOTALMB MB for a full install,
plus what you want for /home.
The maximum file system currently supported is 4 GB.
If there is no free space on your disk then you have to choose an option:
@ -224,7 +228,7 @@ Please finish the name of the primary partition you have created:
then
# Automatic mode
PF="/tmp/pf"
if autopart -f$PF
if autopart -m$TOTALMB -f$PF
then if [ -s "$PF" ]
then
set `cat $PF`
@ -258,6 +262,15 @@ umount /dev/$root 2>/dev/null && echo "Unmounted $root for you."
umount /dev/$home 2>/dev/null && echo "Unmounted $home for you."
umount /dev/$usr 2>/dev/null && echo "Unmounted $usr for you."
devsize="`devsize /dev/$primary`"
devsizemb="`expr $devsize / 1024 / 2`"
if [ $devsizemb -lt $TOTALMB ]
then echo "The selected partition ($devsizemb MB) is too small."
echo "You'll need $TOTALMB MB at least."
exit 1
fi
TMPMP=/m
mkdir $TMPMP >/dev/null 2>&1
@ -265,55 +278,77 @@ confirm=""
while [ "$confirm" = "" ]
do
auto=""
echo ""
if mount /dev/$home $TMPMP >/dev/null 2>&1
then umount /dev/$home >/dev/null 2>&1
echo "Reinstall?"
echo ""
echo "It seems like there is already a MINIX system there (in $home)."
echo "You can reinstall, which means your /home won't be touched."
echo "If you don't want to keep /home, you can \"mkfs /dev/$home\" after installing."
echo "If you type N, I'll exit. "
echo "You have selected an existing MINIX 3 partition."
echo "Type F for full installation (to overwrite entire partition)"
echo "Type R for a reinstallation (existing /home will not be affected)"
echo ""
echo -n "Would you like to reinstall, keeping /home intact? [Y] "
auto="r"
echo -n "(F)ull or (R)einstall? [R] "
read conf
case "$conf" in
"") confirm="ok"; auto="r"; ;;
[Rr]*) confirm="ok"; auto="r"; ;;
[Ff]*) confirm="ok"; auto="" ;;
esac
else echo "Clean install?"
echo ""
echo "It seems like there is NO MINIX system in $home."
echo "It seems like there is NO MINIX system already there,"
echo "or no /home filesystem in $home."
echo "Just in case there is something there you want to keep, I'll"
echo "ask you this. If you type N, I'll exit to let you figure"
echo "out what is wrong."
echo ""
echo "Would you like to install, wiping everything "
echo -n "in /dev/$primary ? [Y] "
auto=""
read conf
case "$conf" in
"") confirm="ok"; ;;
[Yy]*) confirm="ok"; ;;
[Nn]*) exit 1; ;;
esac
fi
read conf
case "$conf" in
"") confirm="ok"; ;;
[Yy]*) confirm="ok"; ;;
[Nn]*) exit 1; ;;
esac
done
nohome="0"
if [ ! "$auto" = r ]
then homesize=""
while [ -z "$homesize" ]
do
devsize="`devsize /dev/$primary`"
devsizemb="`expr $devsize / 1024 / 2`"
# 10% of partition is default
defmb="`expr $devsizemb / 10`"
maxhome="`expr $devsizemb - $TOTALMB - 1`"
if [ $defmb -gt $maxhome ]
then
defmb=$maxhome
fi
echo ""
echo "How big do you want your /home to be, "
echo -n "in MB (total partition size is $devsizemb) ? [$defmb] "
echo "MINIX will take up $TOTALMB MB, without /home."
echo -n "How big do you want your /home to be in MB (0-$maxhome) ? [$defmb] "
read homesize
if [ "$homesize" = "" ] ; then homesize=$defmb; fi
echo -n "$homesize MB Ok? [Y] "
read ok
[ "$ok" = Y -o "$ok" = y -o "$ok" = "" ] || homesize=""
if [ "$homesize" -lt 1 ]
then nohome=1
homesize=0
else
if [ "`expr $TOTALMB + $homesize`" -gt $devsizemb ]
then echo "That won't fit!"
else
echo -n "$homesize MB Ok? [Y] "
read ok
[ "$ok" = Y -o "$ok" = y -o "$ok" = "" ] || homesize=""
fi
fi
echo ""
done
# Homesize in sectors
@ -369,9 +404,13 @@ partition /dev/$primary 1 81:${ROOTSECTS}* 81:$homesize 81:0+ > /dev/null || exi
echo "Creating /dev/$root for / .."
mkfs -B $blocksizebytes /dev/$root || exit
if [ ! "$auto" = r ]
then echo "Creating /dev/$home for /home .."
mkfs -B $blocksizebytes /dev/$home || exit
if [ "$nohome" = 0 ]
then
if [ ! "$auto" = r ]
then echo "Creating /dev/$home for /home .."
mkfs -B $blocksizebytes /dev/$home || exit
fi
else echo "Skipping /home"
fi
echo "Creating /dev/$usr for /usr .."
@ -389,9 +428,14 @@ echo ""
echo "Scanning /dev/$root for bad blocks:"
readall -b /dev/$root | sh
echo ""
echo "Scanning /dev/$home for bad blocks:"
readall -b /dev/$home | sh
if [ "$nohome" = 0 ]
then
echo ""
echo "Scanning /dev/$home for bad blocks:"
readall -b /dev/$home | sh
fshome="home=/dev/$home"
else fshome=""
fi
echo ""
echo "Scanning /dev/$usr for bad blocks:"
@ -408,7 +452,7 @@ echo ""
mount /dev/$usr /mnt >/dev/null || exit # Mount the intended /usr.
files="`find /usr | wc -l`"
files="`cat /.usrfiles`"
cpdir -v /usr /mnt | progressbar "$files" || exit # Copy the usr floppy.
@ -423,7 +467,7 @@ umount /dev/$usr >/dev/null || exit # Unmount the intended /usr.
mount /dev/$root /mnt >/dev/null || exit
# Running from the installation CD.
files="`find / -xdev | wc -l`"
files="`cat /.rootfiles`"
cpdir -vx / /mnt | progressbar "$files" || exit
if [ -n "$driver" ]
@ -431,7 +475,7 @@ then echo "eth0 $driver 0 { default; };" >/mnt/etc/inet.conf
fi
# CD remnants that aren't for the installed system
rm /mnt/etc/issue /mnt/CD 2>/dev/null
rm /mnt/etc/issue /mnt/CD /mnt/.* 2>/dev/null
# Change /etc/fstab. (No swap.)
# ${swap:+swap=/dev/$swap}
echo >/mnt/etc/fstab "\
@ -439,7 +483,7 @@ echo >/mnt/etc/fstab "\
root=/dev/$root
usr=/dev/$usr
home=/dev/$home"
$fshome"
# National keyboard map.
test -n "$keymap" && cp -p "/usr/lib/keymaps/$keymap.map" /mnt/etc/keymap
@ -459,7 +503,7 @@ sync
bios="`echo $primary | sed 's/d./dX/g'`"
if [ ! "$auto" = "r" ]
then if mount /dev/$home /home
then if mount /dev/$home /home 2>/dev/null
then for u in bin ast
do if mkdir ~$u
then echo " * Creating home directory for $u in ~$u"