newer at_wini.c (really incl atapi dma this time)

This commit is contained in:
Ben Gras 2009-10-19 15:45:14 +00:00
parent 3017061093
commit 6b01026668

View file

@ -257,7 +257,8 @@ struct command {
/* Timeouts and max retries. */
int timeout_ticks = DEF_TIMEOUT_TICKS, max_errors = MAX_ERRORS;
long w_standard_timeouts = 0, w_pci_debug = 0, w_instance = 0,
disable_dma = 0, atapi_debug = 0, w_identify_wakeup_ticks, wakeup_ticks;
disable_dma = 0, atapi_debug = 0, w_identify_wakeup_ticks,
wakeup_ticks, w_atapi_dma;
int w_testing = 0, w_silent = 0;
@ -375,8 +376,8 @@ FORWARD _PROTOTYPE( int w_waitfor, (int mask, int value) );
FORWARD _PROTOTYPE( int w_waitfor_dma, (int mask, int value) );
FORWARD _PROTOTYPE( void w_geometry, (struct partition *entry) );
#if ENABLE_ATAPI
FORWARD _PROTOTYPE( int atapi_sendpacket, (u8_t *packet, unsigned cnt) );
FORWARD _PROTOTYPE( int atapi_intr_wait, (void) );
FORWARD _PROTOTYPE( int atapi_sendpacket, (u8_t *packet, unsigned cnt, int do_dma) );
FORWARD _PROTOTYPE( int atapi_intr_wait, (int dma, size_t max) );
FORWARD _PROTOTYPE( int atapi_open, (void) );
FORWARD _PROTOTYPE( void atapi_close, (void) );
FORWARD _PROTOTYPE( int atapi_transfer, (int proc_nr, int opcode,
@ -475,6 +476,7 @@ PRIVATE void init_params()
env_parse(NO_DMA_VAR, "d", 0, &disable_dma, 0, 1);
env_parse("ata_id_timeout", "d", 0, &wakeup_secs, 1, 60);
env_parse("atapi_debug", "d", 0, &atapi_debug, 0, 1);
env_parse("atapi_dma", "d", 0, &w_atapi_dma, 0, 1);
w_identify_wakeup_ticks = wakeup_secs * system_hz;
@ -860,6 +862,104 @@ prev_wn = w_wn;
return(w_dv);
}
#define id_byte(n) (&tmp_buf[2 * (n)])
#define id_word(n) (((u16_t) id_byte(n)[0] << 0) \
|((u16_t) id_byte(n)[1] << 8))
#define id_longword(n) (((u32_t) id_byte(n)[0] << 0) \
|((u32_t) id_byte(n)[1] << 8) \
|((u32_t) id_byte(n)[2] << 16) \
|((u32_t) id_byte(n)[3] << 24))
/*===========================================================================*
* check_dma *
*===========================================================================*/
void
check_dma(struct wini *wn)
{
unsigned long dma_status = 0;
u32_t dma_base;
int id_dma, ultra_dma;
u16_t w;
int driveno, drive1;
driveno = wn - wini;
drive1 = driveno % 2;
wn->dma= 0;
if (disable_dma)
return;
w= id_word(ID_CAPABILITIES);
id_dma= !!(w & ID_CAP_DMA);
w= id_byte(ID_FIELD_VALIDITY)[0];
ultra_dma= !!(w & ID_FV_88);
dma_base= wn->base_dma;
if (dma_base) {
if (sys_inb(dma_base + DMA_STATUS, &dma_status) != OK) {
panic(w_name(),
"unable to read DMA status register",
NO_NUM);
}
}
if (id_dma && dma_base) {
w= id_word(ID_MULTIWORD_DMA);
if (w_pci_debug &&
(w & (ID_MWDMA_2_SUP|ID_MWDMA_1_SUP|ID_MWDMA_0_SUP))) {
printf(
"%s: multiword DMA modes supported:%s%s%s\n",
w_name(),
(w & ID_MWDMA_0_SUP) ? " 0" : "",
(w & ID_MWDMA_1_SUP) ? " 1" : "",
(w & ID_MWDMA_2_SUP) ? " 2" : "");
}
if (w_pci_debug &&
(w & (ID_MWDMA_0_SEL|ID_MWDMA_1_SEL|ID_MWDMA_2_SEL))) {
printf(
"%s: multiword DMA mode selected:%s%s%s\n",
w_name(),
(w & ID_MWDMA_0_SEL) ? " 0" : "",
(w & ID_MWDMA_1_SEL) ? " 1" : "",
(w & ID_MWDMA_2_SEL) ? " 2" : "");
}
if (w_pci_debug && ultra_dma) {
w= id_word(ID_ULTRA_DMA);
if (w & (ID_UDMA_0_SUP|ID_UDMA_1_SUP|
ID_UDMA_2_SUP|ID_UDMA_3_SUP|
ID_UDMA_4_SUP|ID_UDMA_5_SUP)) {
printf(
"%s: Ultra DMA modes supported:%s%s%s%s%s%s\n",
w_name(),
(w & ID_UDMA_0_SUP) ? " 0" : "",
(w & ID_UDMA_1_SUP) ? " 1" : "",
(w & ID_UDMA_2_SUP) ? " 2" : "",
(w & ID_UDMA_3_SUP) ? " 3" : "",
(w & ID_UDMA_4_SUP) ? " 4" : "",
(w & ID_UDMA_5_SUP) ? " 5" : "");
}
if (w & (ID_UDMA_0_SEL|ID_UDMA_1_SEL|
ID_UDMA_2_SEL|ID_UDMA_3_SEL|
ID_UDMA_4_SEL|ID_UDMA_5_SEL)) {
printf(
"%s: Ultra DMA mode selected:%s%s%s%s%s%s\n",
w_name(),
(w & ID_UDMA_0_SEL) ? " 0" : "",
(w & ID_UDMA_1_SEL) ? " 1" : "",
(w & ID_UDMA_2_SEL) ? " 2" : "",
(w & ID_UDMA_3_SEL) ? " 3" : "",
(w & ID_UDMA_4_SEL) ? " 4" : "",
(w & ID_UDMA_5_SEL) ? " 5" : "");
}
}
wn->dma= 1;
} else if (id_dma || dma_base) {
printf("id_dma %d, dma_base 0x%x\n", id_dma, dma_base);
} else
printf("no DMA support\n");
}
/*===========================================================================*
* w_identify *
*===========================================================================*/
@ -872,20 +972,10 @@ PRIVATE int w_identify()
struct wini *wn = w_wn;
struct command cmd;
int i, s;
int id_dma, ultra_dma;
u32_t dma_base;
u16_t w;
unsigned long dma_status;
unsigned long size;
int prev_wakeup;
int r;
#define id_byte(n) (&tmp_buf[2 * (n)])
#define id_word(n) (((u16_t) id_byte(n)[0] << 0) \
|((u16_t) id_byte(n)[1] << 8))
#define id_longword(n) (((u32_t) id_byte(n)[0] << 0) \
|((u32_t) id_byte(n)[1] << 8) \
|((u32_t) id_byte(n)[2] << 16) \
|((u32_t) id_byte(n)[3] << 24))
/* Try to identify the device. */
cmd.ldh = wn->ldhpref;
@ -954,96 +1044,7 @@ PRIVATE int w_identify()
wn->lba48 = 1;
}
/* Check for DMA. Assume that only LBA capable devices can do
* DMA.
*/
w= id_word(ID_CAPABILITIES);
id_dma= !!(w & ID_CAP_DMA);
w= id_byte(ID_FIELD_VALIDITY)[0];
ultra_dma= !!(w & ID_FV_88);
dma_base= wn->base_dma;
if (dma_base)
{
if (sys_inb(dma_base + DMA_STATUS, &dma_status) != OK)
{
panic(w_name(),
"unable to read DMA status register",
NO_NUM);
}
}
if (disable_dma)
; /* DMA is disabled */
else if (id_dma && dma_base)
{
w= id_word(ID_MULTIWORD_DMA);
if (w_pci_debug &&
(w & (ID_MWDMA_2_SUP|ID_MWDMA_1_SUP|ID_MWDMA_0_SUP)))
{
printf(
"%s: multiword DMA modes supported:%s%s%s\n",
w_name(),
(w & ID_MWDMA_0_SUP) ? " 0" : "",
(w & ID_MWDMA_1_SUP) ? " 1" : "",
(w & ID_MWDMA_2_SUP) ? " 2" : "");
}
if (w_pci_debug &&
(w & (ID_MWDMA_0_SEL|ID_MWDMA_1_SEL|ID_MWDMA_2_SEL)))
{
printf(
"%s: multiword DMA mode selected:%s%s%s\n",
w_name(),
(w & ID_MWDMA_0_SEL) ? " 0" : "",
(w & ID_MWDMA_1_SEL) ? " 1" : "",
(w & ID_MWDMA_2_SEL) ? " 2" : "");
}
if (w_pci_debug && ultra_dma)
{
w= id_word(ID_ULTRA_DMA);
if (w & (ID_UDMA_0_SUP|ID_UDMA_1_SUP|
ID_UDMA_2_SUP|ID_UDMA_3_SUP|
ID_UDMA_4_SUP|ID_UDMA_5_SUP))
{
printf(
"%s: Ultra DMA modes supported:%s%s%s%s%s%s\n",
w_name(),
(w & ID_UDMA_0_SUP) ? " 0" : "",
(w & ID_UDMA_1_SUP) ? " 1" : "",
(w & ID_UDMA_2_SUP) ? " 2" : "",
(w & ID_UDMA_3_SUP) ? " 3" : "",
(w & ID_UDMA_4_SUP) ? " 4" : "",
(w & ID_UDMA_5_SUP) ? " 5" : "");
}
if (w & (ID_UDMA_0_SEL|ID_UDMA_1_SEL|
ID_UDMA_2_SEL|ID_UDMA_3_SEL|
ID_UDMA_4_SEL|ID_UDMA_5_SEL))
{
printf(
"%s: Ultra DMA mode selected:%s%s%s%s%s%s\n",
w_name(),
(w & ID_UDMA_0_SEL) ? " 0" : "",
(w & ID_UDMA_1_SEL) ? " 1" : "",
(w & ID_UDMA_2_SEL) ? " 2" : "",
(w & ID_UDMA_3_SEL) ? " 3" : "",
(w & ID_UDMA_4_SEL) ? " 4" : "",
(w & ID_UDMA_5_SEL) ? " 5" : "");
}
}
wn->dma= 1;
}
else if (id_dma || dma_base)
{
printf("id_dma %d, dma_base 0x%x\n", id_dma, dma_base);
}
else
printf("no DMA support\n");
#if 0
if (wn->dma && wn == &wini[0])
{
printf("disabling DMA for drive 0\n");
wn->dma= 0;
}
#endif
check_dma(wn);
}
if (wn->lcylinders == 0 || wn->lheads == 0 || wn->lsectors == 0) {
@ -1069,6 +1070,7 @@ PRIVATE int w_identify()
panic(w_name(),"Call to sys_insw() failed", s);
size = 0; /* Size set later. */
check_dma(wn);
#endif
} else {
/* Not an ATA device; no translations, no special features. Don't
@ -1298,14 +1300,13 @@ PRIVATE int do_transfer(struct wini *wn, unsigned int precomp,
return com_out(&cmd);
}
void stop_dma(struct wini *wn)
{
int r;
/* Stop bus master operation */
r= sys_outb(wn->base_dma + DMA_COMMAND, 0);
if (r != 0) panic("at_wini", "setup_dma: sys_outb failed", r);
if (r != 0) panic("at_wini", "stop_dma: sys_outb failed", r);
}
void start_dma(struct wini *wn, int do_write)
@ -1321,9 +1322,41 @@ void start_dma(struct wini *wn, int do_write)
v |= DMA_CMD_WRITE;
}
r= sys_outb(wn->base_dma + DMA_COMMAND, v);
if (r != 0) panic("at_wini", "setup_dma: sys_outb failed", r);
if (r != 0) panic("at_wini", "start_dma: sys_outb failed", r);
}
int error_dma(struct wini *wn)
{
int r;
u32_t v;
#define DMAERR(msg) \
printf("at_wini%d: bad DMA: %s. Disabling DMA for drive %d.\n", \
w_instance, msg, wn - wini); \
printf("at_wini%d: workaround: set %s=1 in boot monitor.\n", \
w_instance, NO_DMA_VAR); \
return 1; \
r= sys_inb(wn->base_dma + DMA_STATUS, &v);
if (r != 0) panic("at_wini", "w_transfer: sys_inb failed", r);
if (!wn->dma_intseen) {
/* DMA did not complete successfully */
if (v & DMA_ST_BM_ACTIVE) {
DMAERR("DMA did not complete");
} else if (v & DMA_ST_ERROR) {
DMAERR("DMA error");
} else {
DMAERR("DMA buffer too small");
}
} else if ((v & DMA_ST_BM_ACTIVE)) {
DMAERR("DMA buffer too large");
}
return 0;
}
/*===========================================================================*
* w_transfer *
*===========================================================================*/
@ -1378,10 +1411,8 @@ int safe; /* iov contains addresses (0) or grants? */
/* First check to see if a reinitialization is needed. */
if (!(wn->state & INITIALIZED) && w_specify() != OK) return(EIO);
if (do_dma) {
stop_dma(wn);
if (do_dma)
{
setup_dma(&nbytes, proc_nr, iov, addr_offset, do_write,
&do_copyout, safe);
#if 0
@ -1393,6 +1424,7 @@ int safe; /* iov contains addresses (0) or grants? */
r = do_transfer(wn, wn->precomp, (nbytes >> SECTOR_SHIFT),
block, opcode, do_dma);
if (do_dma)
start_dma(wn, do_write);
if (opcode == DEV_SCATTER_S) {
@ -1404,8 +1436,7 @@ int safe; /* iov contains addresses (0) or grants? */
panic(w_name(), "couldn't get status", NO_NUM);
}
if (do_dma)
{
if (do_dma) {
/* Wait for the interrupt, check DMA status and optionally
* copy out.
*/
@ -1429,39 +1460,9 @@ int safe; /* iov contains addresses (0) or grants? */
wn->dma_intseen = 1;
}
r= sys_inb(wn->base_dma + DMA_STATUS, &v);
if (r != 0) panic("at_wini", "w_transfer: sys_inb failed", r);
#if 0
if (sys_outb(wn->base_dma + DMA_STATUS, v) != OK) {
panic(w_name(), "couldn't ack irq on (out dma)\n", NO_NUM);
}
#endif
#define BAD_DMA_CONTINUE(msg) { \
printf("at_wini%d: bad DMA: %s. Disabling DMA for drive %d.\n", \
w_instance, msg, wn - wini); \
printf("at_wini%d: workaround: set %s=1 in boot monitor.\n", \
w_instance, NO_DMA_VAR); \
wn->dma = 0; \
continue; \
}
#if 0
printf("dma_status: 0x%x\n", v);
#endif
if (!wn->dma_intseen) {
/* DMA did not complete successfully */
if (v & DMA_ST_BM_ACTIVE) {
BAD_DMA_CONTINUE("DMA did not complete");
} else if (v & DMA_ST_ERROR) {
BAD_DMA_CONTINUE("DMA error");
} else {
BAD_DMA_CONTINUE("DMA buffer too small");
}
}
else if ((v & DMA_ST_BM_ACTIVE)) {
BAD_DMA_CONTINUE("DMA buffer too large");
if(error_dma(wn)) {
wn->dma = 0;
continue;
}
stop_dma(wn);
@ -1702,7 +1703,6 @@ struct command *cmd; /* Command block */
return(OK);
}
/*===========================================================================*
* setup_dma *
*===========================================================================*/
@ -1721,6 +1721,7 @@ int safe;
int i, j, r, bad;
unsigned long v;
struct wini *wn = w_wn;
int verbose = 0;
/* First try direct scatter/gather to the supplied buffers */
size= *sizep;
@ -1729,17 +1730,16 @@ int safe;
bad= 0;
offset= 0; /* Offset in current iov */
#if 0
if(verbose)
printf("at_wini: setup_dma: proc_nr %d\n", proc_nr);
#endif
while (size > 0)
{
#if 0
if(verbose) {
printf(
"at_wini: setup_dma: iov[%d]: addr 0x%x, size %d offset %d, size %d\n",
i, iov[i].iov_addr, iov[i].iov_size, offset, size);
#endif
}
n= iov[i].iov_size-offset;
if (n > size)
@ -1776,6 +1776,7 @@ int safe;
if (j >= N_PRDTE)
{
/* Too many entries */
bad= 1;
break;
}
@ -1803,14 +1804,14 @@ int safe;
panic("at_wini", "bad prdt index", j);
prdt[j-1].prdte_flags |= PRDTE_FL_EOT;
#if 0
for (i= 0; i<j; i++)
{
if(verbose) {
printf("dma not bad\n");
for (i= 0; i<j; i++) {
printf("prdt[%d]: base 0x%x, size %d, flags 0x%x\n",
i, prdt[i].prdte_base, prdt[i].prdte_count,
prdt[i].prdte_flags);
}
#endif
}
}
/* The caller needs to perform a copy-out from the dma buffer if
@ -1821,6 +1822,8 @@ int safe;
if (bad)
{
if(verbose)
printf("partially bad dma\n");
/* Adjust request size */
size= *sizep;
if (size > ATA_DMA_BUF_SIZE)
@ -1899,14 +1902,14 @@ int safe;
if (size != 0)
panic("at_wini", "size to large for prdt", NO_NUM);
#if 0
if(verbose) {
for (i= 0; i<=j; i++)
{
printf("prdt[%d]: base 0x%x, size %d, flags 0x%x\n",
i, prdt[i].prdte_base, prdt[i].prdte_count,
prdt[i].prdte_flags);
}
#endif
}
}
/* Verify that the bus master is not active */
@ -1923,6 +1926,7 @@ int safe;
/* Clear interrupt and error flags */
r= sys_outb(wn->base_dma + DMA_STATUS, DMA_ST_INT | DMA_ST_ERROR);
if (r != 0) panic("at_wini", "setup_dma: sys_outb failed", r);
}
@ -2261,9 +2265,9 @@ void sense_request(void)
packet[11] = 0;
for(i = 0; i < SENSE_PACKETSIZE; i++) sense[i] = 0xff;
r = atapi_sendpacket(packet, SENSE_PACKETSIZE);
r = atapi_sendpacket(packet, SENSE_PACKETSIZE, 0);
if (r != OK) { printf("request sense command failed\n"); return; }
if (atapi_intr_wait() <= 0) { printf("WARNING: request response failed\n"); }
if (atapi_intr_wait(0, 0) <= 0) { printf("WARNING: request response failed\n"); }
if (sys_insw(w_wn->base_cmd + REG_DATA, SELF, (void *) sense, SENSE_PACKETSIZE) != OK)
printf("WARNING: sense reading failed\n");
@ -2290,13 +2294,15 @@ int safe; /* use safecopies? */
u64_t pos;
unsigned long block;
u64_t dv_size = w_dv->dv_size;
unsigned nbytes, nblocks, count, before, chunk;
unsigned nbytes, nblocks, before, chunk;
static u8_t packet[ATAPI_PACKETSIZE];
size_t addr_offset = 0;
int dmabytes = 0, piobytes = 0;
errors = fresh = 0;
while (nr_req > 0 && !fresh) {
int do_dma = wn->dma && w_atapi_dma;
/* The Minix block size is smaller than the CD block size, so we
* may have to read extra before or after the good data.
*/
@ -2304,16 +2310,17 @@ int safe; /* use safecopies? */
block = div64u(pos, CD_SECTOR_SIZE);
before = rem64u(pos, CD_SECTOR_SIZE);
if(before)
do_dma = 0;
/* How many bytes to transfer? */
nbytes = count = 0;
nbytes = 0;
for (iop = iov; iop < iov_end; iop++) {
nbytes += iop->iov_size;
if ((before + nbytes) % CD_SECTOR_SIZE == 0) count = nbytes;
if(iop->iov_size % CD_SECTOR_SIZE)
do_dma = 0;
}
/* Does one of the memory chunks end nicely on a CD sector multiple? */
if (count != 0) nbytes = count;
/* Data comes in as words, so we have to enforce even byte counts. */
if ((before | nbytes) & 1) return(EINVAL);
@ -2323,10 +2330,6 @@ int safe; /* use safecopies? */
nbytes = diff64(dv_size, position);
nblocks = (before + nbytes + CD_SECTOR_SIZE - 1) / CD_SECTOR_SIZE;
if (ATAPI_DEBUG) {
printf("block=%lu, before=%u, nbytes=%u, nblocks=%u\n",
block, before, nbytes, nblocks);
}
/* First check to see if a reinitialization is needed. */
if (!(wn->state & INITIALIZED) && w_specify() != OK) return(EIO);
@ -2345,24 +2348,62 @@ int safe; /* use safecopies? */
packet[10] = 0;
packet[11] = 0;
if(do_dma) {
int do_copyout = 0;
stop_dma(wn);
setup_dma(&nbytes, proc_nr, iov, addr_offset, 0,
&do_copyout, safe);
if(do_copyout || (nbytes != nblocks * CD_SECTOR_SIZE)) {
stop_dma(wn);
do_dma = 0;
}
}
/* Tell the controller to execute the packet command. */
r = atapi_sendpacket(packet, nblocks * CD_SECTOR_SIZE);
r = atapi_sendpacket(packet, nblocks * CD_SECTOR_SIZE, do_dma);
if (r != OK) goto err;
/* Read chunks of data. */
while ((r = atapi_intr_wait()) > 0) {
count = r;
if (ATAPI_DEBUG) {
printf("before=%u, nbytes=%u, count=%u\n",
before, nbytes, count);
if(do_dma) {
wn->dma_intseen = 0;
start_dma(wn, 0);
w_intr_wait();
if(!wn->dma_intseen) {
if(w_waitfor_dma(DMA_ST_INT, DMA_ST_INT)) {
wn->dma_intseen = 1;
}
}
if(error_dma(wn)) {
printf("Disabling DMA (ATAPI)\n");
wn->dma = 0;
} else {
dmabytes += nbytes;
while (nbytes > 0) {
size_t chunk;
chunk = nbytes;
if (chunk > iov->iov_size)
chunk = iov->iov_size;
position= add64ul(position, chunk);
nbytes -= chunk;
if ((iov->iov_size -= chunk) == 0) {
iov++;
nr_req--;
}
}
}
continue;
}
/* Read chunks of data. */
while ((r = atapi_intr_wait(do_dma, nblocks * CD_SECTOR_SIZE)) > 0) {
size_t count;
count = r;
while (before > 0 && count > 0) { /* Discard before. */
chunk = before;
if (chunk > count) chunk = count;
if (chunk > DMA_BUF_SIZE) chunk = DMA_BUF_SIZE;
if ((s=sys_insw(wn->base_cmd + REG_DATA, SELF, tmp_buf, chunk)) != OK)
if ((s=sys_insw(wn->base_cmd + REG_DATA,
SELF, tmp_buf, chunk)) != OK)
panic(w_name(),"Call to sys_insw() failed", s);
before -= chunk;
count -= chunk;
@ -2385,6 +2426,7 @@ int safe; /* use safecopies? */
nbytes -= chunk;
count -= chunk;
addr_offset += chunk;
piobytes += chunk;
fresh = 0;
if ((iov->iov_size -= chunk) == 0) {
iov++;
@ -2392,12 +2434,14 @@ int safe; /* use safecopies? */
fresh = 1; /* new element is optional */
addr_offset = 0;
}
}
while (count > 0) { /* Excess data. */
chunk = count;
if (chunk > DMA_BUF_SIZE) chunk = DMA_BUF_SIZE;
if ((s=sys_insw(wn->base_cmd + REG_DATA, SELF, tmp_buf, chunk)) != OK)
if ((s=sys_insw(wn->base_cmd + REG_DATA,
SELF, tmp_buf, chunk)) != OK)
panic(w_name(),"Call to sys_insw() failed", s);
count -= chunk;
}
@ -2415,6 +2459,12 @@ int safe; /* use safecopies? */
}
}
#if 0
if(dmabytes) printf("dmabytes %d ", dmabytes);
if(piobytes) printf("piobytes %d", piobytes);
if(dmabytes || piobytes) printf("\n");
#endif
w_command = CMD_IDLE;
return(OK);
}
@ -2422,9 +2472,10 @@ int safe; /* use safecopies? */
/*===========================================================================*
* atapi_sendpacket *
*===========================================================================*/
PRIVATE int atapi_sendpacket(packet, cnt)
PRIVATE int atapi_sendpacket(packet, cnt, do_dma)
u8_t *packet;
unsigned cnt;
int do_dma;
{
/* Send an Atapi Packet Command */
struct wini *wn = w_wn;
@ -2455,7 +2506,7 @@ unsigned cnt;
#endif
w_command = ATAPI_PACKETCMD;
pv_set(outbyte[0], wn->base_cmd + REG_FEAT, 0);
pv_set(outbyte[0], wn->base_cmd + REG_FEAT, do_dma ? FEAT_DMA : 0);
pv_set(outbyte[1], wn->base_cmd + REG_IRR, 0);
pv_set(outbyte[2], wn->base_cmd + REG_SAMTAG, 0);
pv_set(outbyte[3], wn->base_cmd + REG_CNT_LO, (cnt >> 0) & 0xFF);
@ -2475,14 +2526,6 @@ unsigned cnt;
if ((s=sys_outsw(wn->base_cmd + REG_DATA, SELF, packet, ATAPI_PACKETSIZE)) != OK)
panic(w_name(),"sys_outsw() failed", s);
{
int p;
if (atapi_debug) {
printf("sent command:");
for(p = 0; p < ATAPI_PACKETSIZE; p++) { printf(" %02x", packet[p]); }
printf("\n");
}
}
return(OK);
}
@ -2656,7 +2699,7 @@ char *strerr(int e)
/*===========================================================================*
* atapi_intr_wait *
*===========================================================================*/
PRIVATE int atapi_intr_wait()
PRIVATE int atapi_intr_wait(int do_dma, size_t max)
{
/* Wait for an interrupt and study the results. Returns a number of bytes
* that need to be transferred, or an error code.
@ -2684,9 +2727,6 @@ PRIVATE int atapi_intr_wait()
len |= inbyte[2].value << 8;
irr = inbyte[3].value;
#if ATAPI_DEBUG
printf("wn %p S=%x=%s E=%02x=%s L=%04x I=%02x\n", wn, wn->w_status, strstatus(wn->w_status), e, strerr(e), len, irr);
#endif
if (wn->w_status & (STATUS_BSY | STATUS_CHECK)) {
if (atapi_debug) {
printf("atapi fail: S=%x=%s E=%02x=%s L=%04x I=%02x\n", wn->w_status, strstatus(wn->w_status), e, strerr(e), len, irr);
@ -2723,12 +2763,6 @@ PRIVATE int atapi_intr_wait()
break;
}
#if 0
/* retry if the media changed */
XXX while (phase == (IRR_IO | IRR_COD) && (wn->w_status & STATUS_CHECK)
&& (e & ERROR_SENSE) == SENSE_UATTN && --try > 0);
#endif
wn->w_status |= STATUS_ADMBSY; /* Assume not done yet. */
return(r);
}