minix/drivers/tda19988/tda19988.c

1021 lines
21 KiB
C
Raw Normal View History

#include <minix/blockdriver.h>
#include <minix/drivers.h>
#include <minix/ds.h>
#include <minix/i2c.h>
#include <minix/i2cdriver.h>
#include <minix/log.h>
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
/* constants */
#define NR_DEVS 1 /* number of devices this driver handles */
#define TDA19988_DEV 0 /* index of TDA19988 device */
#define EDID_LEN 128 /* length of standard EDID block */
/* When passing data over a grant one needs to pass
* a buffer to sys_safecopy copybuff is used for that*/
#define COPYBUF_SIZE 0x1000 /* 4k buf */
static unsigned char copybuf[COPYBUF_SIZE];
/* The device has two I2C interfaces CEC (0x34) and HDMI (0x70). This driver
* needs access to both.
*/
/*
* CEC - Register and Bit Definitions
*/
#define CEC_STATUS_REG 0xfe
#define CEC_STATUS_CONNECTED_MASK 0x02
#define CEC_ENABLE_REG 0xff
#define CEC_ENABLE_ALL_MASK 0x87
/*
* HDMI - Pages
*
* The HDMI part is much bigger than the CEC part. Memory is accessed according
* to page and address. Once the page is set, only the address needs to be
* sent if accessing memory locations within the same page (you don't need to
* send the page number every time).
*/
#define HDMI_CTRL_PAGE 0x00
#define HDMI_PPL_PAGE 0x02
#define HDMI_EDID_PAGE 0x09
#define HDMI_INFO_PAGE 0x10
#define HDMI_AUDIO_PAGE 0x11
#define HDMI_HDCP_OTP_PAGE 0x12
#define HDMI_GAMUT_PAGE 0x13
/*
* The page select register isn't part of a page. A dummy value of 0xff is
* used to signfiy this in the code.
*/
#define HDMI_PAGELESS 0xff
/*
* Control Page Registers and Bit Definitions
*/
#define HDMI_CTRL_REV_LO_REG 0x00
#define HDMI_CTRL_REV_HI_REG 0x02
#define HDMI_CTRL_RESET_REG 0x0a
#define HDMI_CTRL_RESET_DDC_MASK 0x02
#define HDMI_CTRL_DDC_CTRL_REG 0x0b
#define HDMI_CTRL_DDC_EN_MASK 0x00
#define HDMI_CTRL_DDC_CLK_REG 0x0c
#define HDMI_CTRL_DDC_CLK_EN_MASK 0x01
#define HDMI_CTRL_INTR_CTRL_REG 0x0f
#define HDMI_CTRL_INTR_EN_GLO_MASK 0x04
#define HDMI_CTRL_INT_REG 0x11
#define HDMI_CTRL_INT_EDID_MASK 0x02
/*
* EDID Page Registers and Bit Definitions
*/
#define HDMI_EDID_DATA_REG 0x00
#define HDMI_EDID_DEV_ADDR_REG 0xfb
#define HDMI_EDID_DEV_ADDR 0xa0
#define HDMI_EDID_OFFSET_REG 0xfc
#define HDMI_EDID_OFFSET 0x00
#define HDMI_EDID_SEG_PTR_ADDR_REG 0xfc
#define HDMI_EDID_SEG_PTR_ADDR 0x00
#define HDMI_EDID_SEG_ADDR_REG 0xfe
#define HDMI_EDID_SEG_ADDR 0x00
#define HDMI_EDID_REQ_REG 0xfa
#define HDMI_EDID_REQ_READ_MASK 0x01
/*
* HDCP and OTP
*/
#define HDMI_HDCP_OTP_DDC_CLK_REG 0x9a
#define HDMI_HDCP_OTP_DDC_CLK_MASK 0x27
/* this register/mask isn't documented but it has to be cleared/set */
#define HDMI_HDCP_OTP_SOME_REG 0x9b
#define HDMI_HDCP_OTP_SOME_MASK 0x02
/*
* Pageless Registers
*/
#define HDMI_PAGE_SELECT_REG 0xff
/*
* Constants
*/
/* Revision of the TDA19988. */
#define HDMI_REV_TDA19988 0x0331
/* the bus that this device is on (counting starting at 1) */
static uint32_t cec_bus;
static uint32_t hdmi_bus;
/* slave address of the device */
static i2c_addr_t cec_address;
static i2c_addr_t hdmi_address;
/* endpoint for the driver for the bus itself. */
static endpoint_t cec_bus_endpoint;
static endpoint_t hdmi_bus_endpoint;
/* logging - use with log_warn(), log_info(), log_debug(), log_trace(), etc */
static struct log log = {
.name = "tda19988",
.log_level = LEVEL_INFO,
.log_func = default_log
};
static void sef_local_startup(void);
static int sef_cb_lu_state_save(int);
static int lu_state_restore(void);
static int sef_cb_init(int type, sef_init_info_t * info);
/* CEC Module */
static int is_display_connected(void);
static int enable_hdmi_module(void);
/* HDMI Module */
static int set_page(uint8_t page);
static int hdmi_read(uint8_t page, uint8_t reg, uint8_t * val);
static int hdmi_write(uint8_t page, uint8_t reg, uint8_t val);
static int hdmi_set(uint8_t page, uint8_t reg, uint8_t mask);
static int hdmi_clear(uint8_t page, uint8_t reg, uint8_t mask);
static int hdmi_ddc_enable(void);
static int hdmi_init(void);
static int check_revision(void);
static int read_edid(uint8_t * data, size_t count);
/* libblockdriver callbacks */
static int tda19988_blk_open(devminor_t minor, int access);
static int tda19988_blk_close(devminor_t minor);
static ssize_t tda19988_blk_transfer(devminor_t minor, int do_write, u64_t pos,
endpoint_t endpt, iovec_t * iov, unsigned int count, int flags);
static int tda19988_blk_ioctl(devminor_t minor, unsigned long request,
endpoint_t endpt, cp_grant_id_t grant, endpoint_t user_endpt);
static struct device *tda19988_blk_part(devminor_t minor);
static void tda19988_blk_other(message * m, int ipc_status);
/* Entry points into the device dependent code of block drivers. */
struct blockdriver tda19988_tab = {
.bdr_type = BLOCKDRIVER_TYPE_OTHER,
.bdr_open = tda19988_blk_open,
.bdr_close = tda19988_blk_close,
.bdr_transfer = tda19988_blk_transfer,
.bdr_ioctl = tda19988_blk_ioctl, /* always returns ENOTTY */
.bdr_part = tda19988_blk_part,
.bdr_other = tda19988_blk_other /* for notify events from DS */
};
/* counts the number of times a device file is open */
static int openct[NR_DEVS];
/* base and size of each device */
static struct device geom[NR_DEVS];
static int
tda19988_blk_open(devminor_t minor, int access)
{
log_trace(&log, "tda19988_blk_open(%d,%d)\n", minor, access);
if (tda19988_blk_part(minor) == NULL) {
return ENXIO;
}
openct[minor]++;
return OK;
}
static int
tda19988_blk_close(devminor_t minor)
{
log_trace(&log, "tda19988_blk_close(%d)\n", minor);
if (tda19988_blk_part(minor) == NULL) {
return ENXIO;
}
if (openct[minor] < 1) {
log_warn(&log, "closing unopened device %d\n", minor);
return EINVAL;
}
openct[minor]--;
return OK;
}
static ssize_t
tda19988_blk_transfer(devminor_t minor, int do_write, u64_t pos64,
endpoint_t endpt, iovec_t * iov, unsigned int nr_req, int flags)
{
unsigned count;
struct device *dv;
u64_t dv_size;
int r;
cp_grant_id_t grant;
log_trace(&log, "tda19988_blk_transfer()\n");
/* Get minor device information. */
dv = tda19988_blk_part(minor);
if (dv == NULL) {
return ENXIO;
}
if (nr_req > NR_IOREQS) {
return EINVAL;
}
dv_size = dv->dv_size;
if (pos64 >= dv_size) {
return OK; /* Beyond EOF */
}
if (nr_req > 0) {
/* How much to transfer and where to / from. */
count = iov->iov_size;
grant = (cp_grant_id_t) iov->iov_addr;
/* check for EOF */
if (pos64 >= dv_size) {
return 0;
}
/* don't go past the end of the device */
if (pos64 + count > dv_size) {
count = dv_size - pos64;
}
/* don't overflow copybuf */
if (count > COPYBUF_SIZE) {
count = COPYBUF_SIZE;
}
log_debug(&log, "transfering 0x%x bytes\n", count);
if (do_write) {
log_warn(&log, "Error: writing to read-only device\n");
return EACCES;
} else {
if (is_display_connected() == 1) {
r = hdmi_init();
if (r != OK) {
log_warn(&log,
"Failed to enable HDMI module\n");
return EIO;
}
memset(copybuf, '\0', COPYBUF_SIZE);
r = read_edid(copybuf, count);
if (r != OK) {
log_warn(&log,
"read_edid() failed (r=%d)\n", r);
return r;
}
r = sys_safecopyto(endpt, grant, (vir_bytes)
0, (vir_bytes) copybuf, count);
if (r != OK) {
log_warn(&log, "safecopyto failed\n");
return EINVAL;
}
return iov->iov_size;
} else {
log_warn(&log, "Display not connected.\n");
return ENODEV;
}
}
} else {
/* empty request */
return 0;
}
}
static int
tda19988_blk_ioctl(devminor_t minor, unsigned long request, endpoint_t endpt,
cp_grant_id_t grant, endpoint_t UNUSED(user_endpt))
{
log_trace(&log, "tda19988_blk_ioctl(%d)\n", minor);
/* no supported ioctls for this device */
return ENOTTY;
}
static struct device *
tda19988_blk_part(devminor_t minor)
{
log_trace(&log, "tda19988_blk_part(%d)\n", minor);
if (minor < 0 || minor >= NR_DEVS) {
return NULL;
}
return &geom[minor];
}
static void
tda19988_blk_other(message * m, int ipc_status)
{
log_trace(&log, "tda19988_blk_other(0x%x)\n", m->m_type);
if (is_ipc_notify(ipc_status)) {
if (m->m_source == DS_PROC_NR) {
log_debug(&log,
"bus driver changed state, update endpoint\n");
i2cdriver_handle_bus_update(&cec_bus_endpoint, cec_bus,
cec_address);
i2cdriver_handle_bus_update(&hdmi_bus_endpoint,
hdmi_bus, hdmi_address);
}
} else {
log_warn(&log, "Invalid message type (0x%x)\n", m->m_type);
}
}
/*
* Check to see if a display is connected.
* Returns 1 for yes, 0 for no, -1 for error.
*/
static int
is_display_connected(void)
{
int r;
uint8_t val;
r = i2creg_read8(cec_bus_endpoint, cec_address, CEC_STATUS_REG, &val);
if (r != OK) {
log_warn(&log, "Reading connection status failed (r=%d)\n", r);
return -1;
}
if ((CEC_STATUS_CONNECTED_MASK & val) == 0) {
log_debug(&log, "No Display Detected\n");
return 0;
} else {
log_debug(&log, "Display Detected\n");
return 1;
}
}
/*
* Enable all the modules and clocks.
*/
static int
enable_hdmi_module(void)
{
int r;
r = i2creg_write8(cec_bus_endpoint, cec_address, CEC_ENABLE_REG,
CEC_ENABLE_ALL_MASK);
if (r != OK) {
log_warn(&log, "Writing enable bits failed (r=%d)\n", r);
return -1;
}
log_debug(&log, "HDMI module enabled\n");
return OK;
}
static int
set_page(uint8_t page)
{
int r;
static int current_page = HDMI_PAGELESS;
if (page != current_page) {
r = i2creg_write8(hdmi_bus_endpoint, hdmi_address,
HDMI_PAGE_SELECT_REG, page);
if (r != OK) {
return r;
}
current_page = page;
}
return OK;
}
static int
hdmi_read_block(uint8_t page, uint8_t reg, uint8_t * buf, size_t buflen)
{
int r;
minix_i2c_ioctl_exec_t ioctl_exec;
if (buf == NULL || buflen > I2C_EXEC_MAX_BUFLEN) {
log_warn(&log,
"Read block called with NULL pointer or invalid buflen.\n");
return EINVAL;
}
if (page != HDMI_PAGELESS) {
r = set_page(page);
if (r != OK) {
log_warn(&log, "Unable to set page to 0x%x\n", page);
return r;
}
}
memset(&ioctl_exec, '\0', sizeof(minix_i2c_ioctl_exec_t));
/* Read from HDMI */
ioctl_exec.iie_op = I2C_OP_READ_WITH_STOP;
ioctl_exec.iie_addr = hdmi_address;
/* write the register address */
ioctl_exec.iie_cmd[0] = reg;
ioctl_exec.iie_cmdlen = 1;
/* read bytes */
ioctl_exec.iie_buflen = buflen;
r = i2cdriver_exec(hdmi_bus_endpoint, &ioctl_exec);
if (r != OK) {
log_warn(&log, "hdmi_read() failed (r=%d)\n", r);
return -1;
}
memcpy(buf, ioctl_exec.iie_buf, buflen);
log_trace(&log, "Read %d bytes from reg 0x%x in page 0x%x\n", buflen,
reg, page);
return OK;
}
static int
hdmi_read(uint8_t page, uint8_t reg, uint8_t * val)
{
int r;
if (val == NULL) {
log_warn(&log, "Read called with NULL pointer\n");
return EINVAL;
}
if (page != HDMI_PAGELESS) {
r = set_page(page);
if (r != OK) {
log_warn(&log, "Unable to set page to 0x%x\n", page);
return r;
}
}
r = i2creg_read8(hdmi_bus_endpoint, hdmi_address, reg, val);
if (r != OK) {
log_warn(&log, "hdmi_read() failed (r=%d)\n", r);
return -1;
}
log_trace(&log, "Read 0x%x from reg 0x%x in page 0x%x\n", *val, reg,
page);
return OK;
}
static int
hdmi_write(uint8_t page, uint8_t reg, uint8_t val)
{
int r;
if (page != HDMI_PAGELESS) {
r = set_page(page);
if (r != OK) {
log_warn(&log, "Unable to set page to 0x%x\n", page);
return r;
}
}
r = i2creg_write8(hdmi_bus_endpoint, hdmi_address, reg, val);
if (r != OK) {
log_warn(&log, "hdmi_write() failed (r=%d)\n", r);
return -1;
}
log_trace(&log, "Successfully wrote 0x%x to reg 0x%x in page 0x%x\n",
val, reg, page);
return OK;
}
static int
hdmi_set(uint8_t page, uint8_t reg, uint8_t mask)
{
int r;
uint8_t val;
val = 0x00;
r = hdmi_read(page, reg, &val);
if (r != OK) {
return r;
}
val |= mask;
r = hdmi_write(page, reg, val);
if (r != OK) {
return r;
}
return OK;
}
static int
hdmi_clear(uint8_t page, uint8_t reg, uint8_t mask)
{
int r;
uint8_t val;
val = 0x00;
r = hdmi_read(page, reg, &val);
if (r != OK) {
return r;
}
val &= ~mask;
r = hdmi_write(page, reg, val);
if (r != OK) {
return r;
}
return OK;
}
static int
check_revision(void)
{
int r;
uint8_t rev_lo;
uint8_t rev_hi;
uint16_t revision;
r = hdmi_read(HDMI_CTRL_PAGE, HDMI_CTRL_REV_LO_REG, &rev_lo);
if (r != OK) {
log_warn(&log, "Failed to read rev_lo (r=%d)\n", r);
return -1;
}
r = hdmi_read(HDMI_CTRL_PAGE, HDMI_CTRL_REV_HI_REG, &rev_hi);
if (r != OK) {
log_warn(&log, "Failed to read rev_hi (r=%d)\n", r);
return -1;
}
revision = ((rev_hi << 8) | rev_lo);
if (revision != HDMI_REV_TDA19988) {
log_warn(&log, "Unrecognized value in revision registers.\n");
log_warn(&log, "Read: 0x%x | Expected: 0x%x\n", revision,
HDMI_REV_TDA19988);
return -1;
}
log_debug(&log, "Device Revision: 0x%x\n", revision);
return OK;
}
static int
hdmi_ddc_enable(void)
{
int r;
/* Soft Reset DDC Bus */
r = hdmi_set(HDMI_CTRL_PAGE, HDMI_CTRL_RESET_REG,
HDMI_CTRL_RESET_DDC_MASK);
if (r != OK) {
return r;
}
micro_delay(100000);
r = hdmi_clear(HDMI_CTRL_PAGE, HDMI_CTRL_RESET_REG,
HDMI_CTRL_RESET_DDC_MASK);
if (r != OK) {
return r;
}
micro_delay(100000);
/* Enable DDC */
r = hdmi_write(HDMI_CTRL_PAGE, HDMI_CTRL_DDC_CTRL_REG,
HDMI_CTRL_DDC_EN_MASK);
if (r != OK) {
return r;
}
/* Setup the clock (I think) */
r = hdmi_write(HDMI_CTRL_PAGE, HDMI_CTRL_DDC_CLK_REG,
HDMI_CTRL_DDC_CLK_EN_MASK);
if (r != OK) {
return r;
}
r = hdmi_write(HDMI_HDCP_OTP_PAGE, HDMI_HDCP_OTP_DDC_CLK_REG,
HDMI_HDCP_OTP_DDC_CLK_MASK);
if (r != OK) {
return r;
}
log_debug(&log, "DDC Enabled\n");
return OK;
}
static int
hdmi_init(void)
{
int r;
/* Turn on HDMI module (slave 0x70) */
r = enable_hdmi_module();
if (r != OK) {
log_warn(&log, "HDMI Module Init Failed\n");
return -1;
}
/* Read chip version to ensure compatibility */
r = check_revision();
if (r != OK) {
log_warn(&log, "Couldn't find expected TDA19988 revision\n");
return -1;
}
/* Turn on DDC interface between TDA19988 and display */
r = hdmi_ddc_enable();
if (r != OK) {
log_warn(&log, "Failed to enable DDC\n");
return -1;
}
return OK;
}
static int
read_edid(uint8_t * buf, size_t count)
{
int r;
int i, j;
int tries;
int edid_ready;
uint8_t val;
log_debug(&log, "Reading edid...\n");
if (buf == NULL || count < EDID_LEN) {
log_warn(&log, "Expected 128 byte data buffer\n");
return -1;
}
r = hdmi_clear(HDMI_HDCP_OTP_PAGE, HDMI_HDCP_OTP_SOME_REG,
HDMI_HDCP_OTP_SOME_MASK);
if (r != OK) {
log_warn(&log, "Failed to clear bit in HDCP OTP reg\n");
return -1;
}
/* Enable EDID Block Read Interrupt */
r = hdmi_set(HDMI_CTRL_PAGE, HDMI_CTRL_INT_REG,
HDMI_CTRL_INT_EDID_MASK);
if (r != OK) {
log_warn(&log, "Failed to enable EDID Block Read interrupt\n");
return -1;
}
/* enable global interrupts */
r = hdmi_write(HDMI_CTRL_PAGE, HDMI_CTRL_INTR_CTRL_REG,
HDMI_CTRL_INTR_EN_GLO_MASK);
if (r != OK) {
log_warn(&log, "Failed to enable interrupts\n");
return -1;
}
/* Set Device Address */
r = hdmi_write(HDMI_EDID_PAGE, HDMI_EDID_DEV_ADDR_REG,
HDMI_EDID_DEV_ADDR);
if (r != OK) {
log_warn(&log, "Couldn't set device address\n");
return -1;
}
/* Set Offset */
r = hdmi_write(HDMI_EDID_PAGE, HDMI_EDID_OFFSET_REG, HDMI_EDID_OFFSET);
if (r != OK) {
log_warn(&log, "Couldn't set offset\n");
return -1;
}
/* Set Segment Pointer Address */
r = hdmi_write(HDMI_EDID_PAGE, HDMI_EDID_SEG_PTR_ADDR_REG,
HDMI_EDID_SEG_PTR_ADDR);
if (r != OK) {
log_warn(&log, "Couldn't set segment pointer address\n");
return -1;
}
/* Set Segment Address */
r = hdmi_write(HDMI_EDID_PAGE, HDMI_EDID_SEG_ADDR_REG,
HDMI_EDID_SEG_ADDR);
if (r != OK) {
log_warn(&log, "Couldn't set segment address\n");
return -1;
}
/*
* Toggle EDID Read Request Bit to request a read.
*/
r = hdmi_write(HDMI_EDID_PAGE, HDMI_EDID_REQ_REG,
HDMI_EDID_REQ_READ_MASK);
if (r != OK) {
log_warn(&log, "Couldn't set Read Request bit\n");
return -1;
}
r = hdmi_write(HDMI_EDID_PAGE, HDMI_EDID_REQ_REG, 0x00);
if (r != OK) {
log_warn(&log, "Couldn't clear Read Request bit\n");
return -1;
}
log_debug(&log, "Starting polling\n");
/* poll interrupt status flag */
edid_ready = 0;
for (tries = 0; tries < 100; tries++) {
r = hdmi_read(HDMI_CTRL_PAGE, HDMI_CTRL_INT_REG, &val);
if (r != OK) {
log_warn(&log, "Read failed while polling int flag\n");
return -1;
}
if (val & HDMI_CTRL_INT_EDID_MASK) {
log_debug(&log, "Mask Set\n");
edid_ready = 1;
break;
}
micro_delay(1000);
}
if (!edid_ready) {
log_warn(&log, "Data Ready interrupt never fired.\n");
return EBUSY;
}
log_debug(&log, "Ready to read\n");
/* Finally, perform the read. */
memset(buf, '\0', count);
r = hdmi_read_block(HDMI_EDID_PAGE, HDMI_EDID_DATA_REG, buf, EDID_LEN);
if (r != OK) {
log_warn(&log, "Failed to read EDID data\n");
return -1;
}
/* Disable EDID Block Read Interrupt */
r = hdmi_clear(HDMI_CTRL_PAGE, HDMI_CTRL_INT_REG,
HDMI_CTRL_INT_EDID_MASK);
if (r != OK) {
log_warn(&log,
"Failed to disable EDID Block Read interrupt\n");
return -1;
}
r = hdmi_set(HDMI_HDCP_OTP_PAGE, HDMI_HDCP_OTP_SOME_REG,
HDMI_HDCP_OTP_SOME_MASK);
if (r != OK) {
log_warn(&log, "Failed to set bit in HDCP/OTP reg\n");
return -1;
}
log_debug(&log, "Done EDID Reading\n");
return OK;
}
static int
sef_cb_lu_state_save(int UNUSED(state))
{
ds_publish_u32("cec_bus", cec_bus, DSF_OVERWRITE);
ds_publish_u32("hdmi_bus", hdmi_bus, DSF_OVERWRITE);
ds_publish_u32("cec_address", cec_address, DSF_OVERWRITE);
ds_publish_u32("hdmi_address", hdmi_address, DSF_OVERWRITE);
return OK;
}
static int
lu_state_restore(void)
{
/* Restore the state. */
u32_t value;
ds_retrieve_u32("cec_bus", &value);
ds_delete_u32("cec_bus");
cec_bus = (int) value;
ds_retrieve_u32("hdmi_bus", &value);
ds_delete_u32("hdmi_bus");
hdmi_bus = (int) value;
ds_retrieve_u32("cec_address", &value);
ds_delete_u32("cec_address");
cec_address = (int) value;
ds_retrieve_u32("hdmi_address", &value);
ds_delete_u32("hdmi_address");
hdmi_address = (int) value;
return OK;
}
static int
sef_cb_init(int type, sef_init_info_t * UNUSED(info))
{
int r;
if (type == SEF_INIT_LU) {
/* Restore the state. */
lu_state_restore();
}
geom[TDA19988_DEV].dv_base = ((u64_t) (0));
geom[TDA19988_DEV].dv_size = ((u64_t) (128));
/*
* CEC Module
*/
/* look-up the endpoint for the bus driver */
cec_bus_endpoint = i2cdriver_bus_endpoint(cec_bus);
if (cec_bus_endpoint == 0) {
log_warn(&log, "Couldn't find bus driver.\n");
return EXIT_FAILURE;
}
/* claim the device */
r = i2cdriver_reserve_device(cec_bus_endpoint, cec_address);
if (r != OK) {
log_warn(&log, "Couldn't reserve device 0x%x (r=%d)\n",
cec_address, r);
return EXIT_FAILURE;
}
/*
* HDMI Module
*/
/* look-up the endpoint for the bus driver */
hdmi_bus_endpoint = i2cdriver_bus_endpoint(hdmi_bus);
if (hdmi_bus_endpoint == 0) {
log_warn(&log, "Couldn't find bus driver.\n");
return EXIT_FAILURE;
}
/* claim the device */
r = i2cdriver_reserve_device(hdmi_bus_endpoint, hdmi_address);
if (r != OK) {
log_warn(&log, "Couldn't reserve device 0x%x (r=%d)\n",
hdmi_address, r);
return EXIT_FAILURE;
}
if (type != SEF_INIT_LU) {
/* sign up for updates about the i2c bus going down/up */
r = i2cdriver_subscribe_bus_updates(cec_bus);
if (r != OK) {
log_warn(&log, "Couldn't subscribe to bus updates\n");
return EXIT_FAILURE;
}
/* sign up for updates about the i2c bus going down/up */
r = i2cdriver_subscribe_bus_updates(hdmi_bus);
if (r != OK) {
log_warn(&log, "Couldn't subscribe to bus updates\n");
return EXIT_FAILURE;
}
i2cdriver_announce(cec_bus);
if (cec_bus != hdmi_bus) {
i2cdriver_announce(hdmi_bus);
}
blockdriver_announce(type);
log_trace(&log, "announced\n");
}
return OK;
}
static void
sef_local_startup(void)
{
/*
* Register init callbacks. Use the same function for all event types
*/
sef_setcb_init_fresh(sef_cb_init);
sef_setcb_init_lu(sef_cb_init);
sef_setcb_init_restart(sef_cb_init);
/*
* Register live update callbacks.
*/
/* Agree to update immediately when LU is requested in a valid state. */
sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready);
/* Support live update starting from any standard state. */
sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_standard);
/* Register a custom routine to save the state. */
sef_setcb_lu_state_save(sef_cb_lu_state_save);
/* Let SEF perform startup. */
sef_startup();
}
static int
tda19988_env_parse()
{
int r;
long int cec_busl;
long int cec_addressl;
long int hdmi_busl;
long int hdmi_addressl;
r = env_parse("cec_bus", "d", 0, &cec_busl, 1, 3);
if (r != EP_SET) {
return -1;
}
cec_bus = (uint32_t) cec_busl;
r = env_parse("cec_address", "x", 0, &cec_addressl, 0x34, 0x37);
if (r != EP_SET) {
return -1;
}
cec_address = (i2c_addr_t) cec_addressl;
r = env_parse("hdmi_bus", "d", 0, &hdmi_busl, 1, 3);
if (r != EP_SET) {
return -1;
}
hdmi_bus = (uint32_t) hdmi_busl;
r = env_parse("hdmi_address", "x", 0, &hdmi_addressl, 0x70, 0x73);
if (r != EP_SET) {
return -1;
}
hdmi_address = (i2c_addr_t) hdmi_addressl;
return OK;
}
int
main(int argc, char *argv[])
{
int r;
env_setargs(argc, argv);
r = tda19988_env_parse();
if (r < 0) {
log_warn(&log,
"Expecting -args 'cec_bus=X cec_address=0xAA hdmi_bus=Y hdmi_address=0xBB'\n");
log_warn(&log,
"Example -args 'cec_bus=1 cec_address=0x34 hdmi_bus=1 hdmi_address=0x70'\n");
return EXIT_FAILURE;
}
sef_local_startup();
log_debug(&log, "Startup Complete\n");
blockdriver_task(&tda19988_tab);
log_debug(&log, "Shutting down\n");
return OK;
}