minix/releasetools/x86_hdimage.sh

215 lines
6.2 KiB
Bash
Raw Normal View History

#!/usr/bin/env bash
set -e
#
# This script creates a bootable image and should at some point in the future
# be replaced by makefs.
#
# Supported command line switches:
# -i build iso image instead of qemu imaeg
# -b bitcode build, increase partition sizes as necessary
#
: ${ARCH=i386}
: ${OBJ=../obj.${ARCH}}
: ${CROSS_TOOLS=${OBJ}/"tooldir.`uname -s`-`uname -r`-`uname -m`"/bin}
: ${CROSS_PREFIX=${CROSS_TOOLS}/i586-elf32-minix-}
: ${JOBS=1}
: ${DESTDIR=${OBJ}/destdir.$ARCH}
: ${RELEASETOOLSDIR=./releasetools/}
: ${FSTAB=${DESTDIR}/etc/fstab}
: ${BUILDVARS=}
: ${BUILDSH=build.sh}
: ${CREATE_IMAGE_ONLY=0}
: ${RC=minix_x86.rc}
#
# Directory where to store temporary file system images
#
: ${IMG_DIR=${OBJ}/img}
: ${CDFILES=${IMG_DIR}/cd}
# All sized are written in 512 byte blocks
#
# we create a disk image of about 2 gig's
# for alignment reasons, prefer sizes which are multiples of 4096 bytes
#
# these sizes are insufficient for bitcode builds!
# invoke this script with the -b flag to increase sizes accordingly
#
: ${ROOT_SIZE=$(( 64*(2**20) / 512))}
: ${HOME_SIZE=$(( 128*(2**20) / 512))}
: ${USR_SIZE=$(( 1792*(2**20) / 512))}
#
# Do some math to determine the start addresses of the partitions.
# Don't leave holes so the 'partition' invocation later is easy.
#
# Where the kernel & boot modules will be
MODDIR=${DESTDIR}/boot/minix/.temp
while getopts "ib" c
do
case "$c" in
i) : ${IMG=minix_x86.iso}
ISOMODE=1
;;
b) # bitcode build: increase partition sizes
ROOT_SIZE="$((${ROOT_SIZE} + 192*(2**20) / 512))"
USR_SIZE="$((${USR_SIZE} + 256*(2**20) / 512))"
;;
esac
done
: ${IMG=minix_x86.img}
if [ "x${ISOMODE}" = "x1" ]
then
# In iso mode, make all FSes fit (i.e. as small as possible), but
# leave some space on /
ROOTSIZEARG="-x 5"
else
# In hd image mode, FSes have fixed sizes
ROOTSIZEARG="-b $((${ROOT_SIZE} / 8))"
USRSIZEARG="-b $((${USR_SIZE} / 8))"
HOMESIZEARG="-b $((${HOME_SIZE} / 8))"
fi
if [ ! -f ${BUILDSH} ]
then
echo "Please invoke me from the root source dir, where ${BUILDSH} is."
exit 1
fi
export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:${PATH}
#
# Are we going to build the minix sources?
#
if [ ${CREATE_IMAGE_ONLY} -eq 1 ]
then
if [ ! -d ${DESTDIR} ]
then
echo "Minix source code does'nt appear to have been built."
echo "Please try with \$CREATE_IMAGE_ONLY set to 0."
exit 1
fi
fi
#
# Artifacts from this script are stored in the IMG_DIR
#
rm -rf ${IMG_DIR} ${IMG}
mkdir -p ${IMG_DIR} ${CDFILES}
if [ ${CREATE_IMAGE_ONLY} -eq 0 ]
then
echo "Going to build Minix source code..."
#
# Remove the generated files to allow us call build.sh without '-V SLOPPY_FLIST=yes'.
#
rm -f ${FSTAB}
#
# Now start the build.
#
sh ${BUILDSH} -j ${JOBS} -m ${ARCH} -O ${OBJ} -D ${DESTDIR} ${BUILDVARS} -U -u distribution
else
${CROSS_TOOLS}/nbmake-i386 -C releasetools do-hdboot
fi
#
# create a fstab entry in /etc this is normally done during the
# setup phase on x86
#
cat >${FSTAB} <<END_FSTAB
Add PTYFS, Unix98 pseudo terminal support This patch adds support for Unix98 pseudo terminals, that is, posix_openpt(3), grantpt(3), unlockpt(3), /dev/ptmx, and /dev/pts/. The latter is implemented with a new pseudo file system, PTYFS. In effect, this patch adds secure support for unprivileged pseudo terminal allocation, allowing programs such as tmux(1) to be used by non-root users as well. Test77 has been extended with new tests, and no longer needs to run as root. The new functionality is optional. To revert to the old behavior, remove the "ptyfs" entry from /etc/fstab. Technical nodes: o The reason for not implementing the NetBSD /dev/ptm approach is that implementing the corresponding ioctl (TIOCPTMGET) would require adding a number of extremely hairy exceptions to VFS, including the PTY driver having to create new file descriptors for its own device nodes. o PTYFS is required for Unix98 PTYs in order to avoid that the PTY driver has to be aware of old-style PTY naming schemes and even has to call chmod(2) on a disk-backed file system. PTY cannot be its own PTYFS since a character driver may currently not also be a file system. However, PTYFS may be subsumed into a DEVFS in the future. o The Unix98 PTY behavior differs somewhat from NetBSD's, in that slave nodes are created on ptyfs only upon the first call to grantpt(3). This approach obviates the need to revoke access as part of the grantpt(3) call. o Shutting down PTY may leave slave nodes on PTYFS, but once PTY is restarted, these leftover slave nodes will be removed before they create a security risk. Unmounting PTYFS will make existing PTY slaves permanently unavailable, and absence of PTYFS will block allocation of new Unix98 PTYs until PTYFS is (re)mounted. Change-Id: I822b43ba32707c8815fd0f7d5bb7a438f51421c1
2015-06-22 19:14:34 +02:00
/dev/c0d0p2 /usr mfs rw 0 2
/dev/c0d0p3 /home mfs rw 0 2
none /sys devman rw,rslabel=devman 0 0
none /dev/pts ptyfs rw,rslabel=ptyfs 0 0
END_FSTAB
rm -f ${DESTDIR}/SETS.*
${CROSS_TOOLS}/nbpwd_mkdb -V 0 -p -d ${DESTDIR} ${DESTDIR}/etc/master.passwd
#
# make the different file system. this part is *also* hacky. We first convert
# the METALOG.sanitised using mtree into a input METALOG containing uids and
# gids.
# After that we do some magic processing to add device nodes (also missing from METALOG)
# and convert the METALOG into a proto file that can be used by mkfs.mfs
#
echo "Creating the file systems"
#
# read METALOG and use mtree to convert the user and group names into uid and gids
# FIX put "input somewhere clean"
#
cat ${DESTDIR}/METALOG.sanitised | ${CROSS_TOOLS}/nbmtree -N ${DESTDIR}/etc -C -K device > ${IMG_DIR}/input
# add rc (if any)
if [ -f ${RC} ]; then
cp ${RC} ${DESTDIR}/usr/etc/rc.local
echo "./usr/etc/rc.local type=file uid=0 gid=0 mode=0644" >> ${IMG_DIR}/input
fi
# add fstab
echo "./etc/fstab type=file uid=0 gid=0 mode=0755 size=747 time=1365060731.000000000" >> ${IMG_DIR}/input
# fill root.img (skipping /usr entries while keeping the /usr directory)
cat ${IMG_DIR}/input | grep -v "^./usr/" | ${CROSS_TOOLS}/nbtoproto -b ${DESTDIR} -o ${IMG_DIR}/root.proto
#
# Create proto files for /usr and /home using toproto.
#
cat ${IMG_DIR}/input | grep "^\./usr/\|^. " | sed "s,\./usr,\.,g" | ${CROSS_TOOLS}/nbtoproto -b ${DESTDIR}/usr -o ${IMG_DIR}/usr.proto
cat ${IMG_DIR}/input | grep "^\./home/\|^. " | sed "s,\./home,\.,g" | ${CROSS_TOOLS}/nbtoproto -b ${DESTDIR}/home -o ${IMG_DIR}/home.proto
if [ "x${ISOMODE}" = "x1" ]
then
cp ${DESTDIR}/usr/mdec/boot_monitor ${CDFILES}/boot
cp ${MODDIR}/* ${CDFILES}/
. ${RELEASETOOLSDIR}/release.functions
cd_root_changes # uses $CDFILES and writes $CDFILES/boot.cfg
# start the image off with the iso image; reduce root size to reserve
${CROSS_TOOLS}/nbwriteisofs -s0x0 -l MINIX -B ${DESTDIR}/usr/mdec/bootxx_cd9660 -n ${CDFILES} ${IMG}
ISO_SIZE=$((`${CROSS_TOOLS}/nbstat -f %z ${IMG}` / 512))
else
# just make an empty iso partition
ISO_SIZE=8
fi
#
# Generate /root, /usr and /home partition images.
#
echo "Writing Minix filesystem images"
ROOT_START=${ISO_SIZE}
echo " - ROOT"
_ROOT_SIZE=$((`${CROSS_TOOLS}/nbmkfs.mfs -d ${ROOTSIZEARG} -I $((${ROOT_START}*512)) ${IMG} ${IMG_DIR}/root.proto`/512))
USR_START=$((${ROOT_START} + ${_ROOT_SIZE}))
echo " - USR"
_USR_SIZE=$((`${CROSS_TOOLS}/nbmkfs.mfs -d ${USRSIZEARG} -I $((${USR_START}*512)) ${IMG} ${IMG_DIR}/usr.proto`/512))
HOME_START=$((${USR_START} + ${_USR_SIZE}))
echo " - HOME"
_HOME_SIZE=$((`${CROSS_TOOLS}/nbmkfs.mfs -d ${HOMESIZEARG} -I $((${HOME_START}*512)) ${IMG} ${IMG_DIR}/home.proto`/512))
#
# Write the partition table using the natively compiled
# minix partition utility
#
${CROSS_TOOLS}/nbpartition -m ${IMG} 0 81:${ISO_SIZE} \
81:${_ROOT_SIZE} 81:${_USR_SIZE} 81:${_HOME_SIZE}
mods="`( cd ${MODDIR}; echo mod* | tr ' ' ',' )`"
if [ "x${ISOMODE}" = "x1" ]
then
echo "CD image at `pwd`/${IMG}"
else
echo "To boot this image on kvm:"
echo "cd ${MODDIR} && qemu-system-i386 --enable-kvm -m 256 -kernel kernel -append \"rootdevname=c0d0p1\" -initrd \"${mods}\" -hda `pwd`/${IMG}"
fi