minix/drivers/dp8390/rtl8029.c

379 lines
7.5 KiB
C
Raw Normal View History

/*
rtl8029.c
Initialization of PCI DP8390-based ethernet cards
Created: April 2000 by Philip Homburg <philip@f-mnx.phicoh.com>
*/
#include <minix/drivers.h>
#include <stdlib.h>
#include <sys/types.h>
#include <net/gen/ether.h>
#include <net/gen/eth_io.h>
#include <machine/pci.h>
#include "assert.h"
#include "local.h"
#include "dp8390.h"
#include "rtl8029.h"
#if ENABLE_PCI
PRIVATE struct pcitab
{
u16_t vid;
u16_t did;
int checkclass;
} pcitab[]=
{
{ 0x10ec, 0x8029, 0 }, /* Realtek RTL8029 */
{ 0x0000, 0x0000, 0 }
};
_PROTOTYPE( static void rtl_init, (struct dpeth *dep) );
#if 0
_PROTOTYPE( static u16_t get_ee_word, (dpeth_t *dep, int a) );
_PROTOTYPE( static void ee_wen, (dpeth_t *dep) );
_PROTOTYPE( static void set_ee_word, (dpeth_t *dep, int a, u16_t w) );
_PROTOTYPE( static void ee_wds, (dpeth_t *dep) );
#endif
PUBLIC int rtl_probe(dep, skip)
struct dpeth *dep;
int skip;
{
int i, r, devind, just_one;
u16_t vid, did;
u32_t bar;
u8_t ilr;
char *dname;
pci_init();
if ((dep->de_pcibus | dep->de_pcidev | dep->de_pcifunc) != 0)
{
/* Look for specific PCI device */
r= pci_find_dev(dep->de_pcibus, dep->de_pcidev,
dep->de_pcifunc, &devind);
if (r == 0)
{
printf("%s: no PCI found at %d.%d.%d\n",
dep->de_name, dep->de_pcibus,
dep->de_pcidev, dep->de_pcifunc);
return 0;
}
pci_ids(devind, &vid, &did);
just_one= TRUE;
}
else
{
r= pci_first_dev(&devind, &vid, &did);
if (r == 0)
return 0;
just_one= FALSE;
}
for(;;)
{
for (i= 0; pcitab[i].vid != 0 || pcitab[i].did != 0; i++)
{
if (pcitab[i].vid != vid)
continue;
if (pcitab[i].did != did)
continue;
if (pcitab[i].checkclass) {
panic("rtl_probe: class check not implemented");
}
break;
}
if (pcitab[i].vid != 0 || pcitab[i].did != 0) {
if (just_one || !skip)
break;
skip--;
}
if (just_one)
{
printf(
"%s: wrong PCI device (%04X/%04X) found at %d.%d.%d\n",
dep->de_name, vid, did,
dep->de_pcibus,
dep->de_pcidev, dep->de_pcifunc);
return 0;
}
r= pci_next_dev(&devind, &vid, &did);
if (!r)
return 0;
}
dname= pci_dev_name(vid, did);
if (!dname)
dname= "unknown device";
printf("%s: %s (%04X/%04X) at %s\n",
dep->de_name, dname, vid, did, pci_slot_name(devind));
if(pci_reserve_ok(devind) != OK)
return 0;
/* printf("cr = 0x%x\n", pci_attr_r16(devind, PCI_CR)); */
bar= pci_attr_r32(devind, PCI_BAR) & 0xffffffe0;
2005-08-09 13:23:41 +02:00
if (bar < 0x400)
panic("base address is not properly configured");
2005-08-09 13:23:41 +02:00
dep->de_base_port= bar;
ilr= pci_attr_r8(devind, PCI_ILR);
dep->de_irq= ilr;
if (debug)
{
printf("%s: using I/O address 0x%lx, IRQ %d\n",
dep->de_name, (unsigned long)bar, ilr);
}
dep->de_initf= rtl_init;
return TRUE;
}
static void rtl_init(dep)
dpeth_t *dep;
{
u8_t reg_a, reg_b, cr, config0, config2, config3;
int i;
#if DEBUG
printf("rtl_init called\n");
#endif
ne_init(dep);
/* ID */
outb_reg0(dep, DP_CR, CR_PS_P0);
reg_a = inb_reg0(dep, DP_DUM1);
reg_b = inb_reg0(dep, DP_DUM2);
#if DEBUG
printf("rtl_init: '%c', '%c'\n", reg_a, reg_b);
#endif
outb_reg0(dep, DP_CR, CR_PS_P3);
config0 = inb_reg3(dep, 3);
config2 = inb_reg3(dep, 5);
config3 = inb_reg3(dep, 6);
outb_reg0(dep, DP_CR, CR_PS_P0);
#if DEBUG
printf("rtl_init: config 0/2/3 = %x/%x/%x\n",
config0, config2, config3);
#endif
if (getenv("RTL8029FD"))
{
printf("rtl_init: setting full-duplex mode\n");
outb_reg0(dep, DP_CR, CR_PS_P3);
cr= inb_reg3(dep, 1);
outb_reg3(dep, 1, cr | 0xc0);
outb_reg3(dep, 6, config3 | 0x40);
config3 = inb_reg3(dep, 6);
config2= inb_reg3(dep, 5);
outb_reg3(dep, 5, config2 | 0x20);
config2= inb_reg3(dep, 5);
outb_reg3(dep, 1, cr);
outb_reg0(dep, DP_CR, CR_PS_P0);
#if DEBUG
printf("rtl_init: config 2 = %x\n", config2);
printf("rtl_init: config 3 = %x\n", config3);
#endif
}
#if DEBUG
for (i= 0; i<64; i++)
printf("%x ", get_ee_word(dep, i));
printf("\n");
#endif
#if 0
if (getenv("RTL8029MN"))
{
ee_wen(dep);
set_ee_word(dep, 0x78/2, 0x10ec);
set_ee_word(dep, 0x7A/2, 0x8029);
set_ee_word(dep, 0x7C/2, 0x10ec);
set_ee_word(dep, 0x7E/2, 0x8029);
ee_wds(dep);
assert(get_ee_word(dep, 0x78/2) == 0x10ec);
assert(get_ee_word(dep, 0x7A/2) == 0x8029);
assert(get_ee_word(dep, 0x7C/2) == 0x10ec);
assert(get_ee_word(dep, 0x7E/2) == 0x8029);
}
if (getenv("RTL8029XXX"))
{
ee_wen(dep);
set_ee_word(dep, 0x76/2, 0x8029);
ee_wds(dep);
assert(get_ee_word(dep, 0x76/2) == 0x8029);
}
#endif
}
#if 0
static u16_t get_ee_word(dep, a)
dpeth_t *dep;
int a;
{
int b, i, cmd;
u16_t w;
outb_reg0(dep, DP_CR, CR_PS_P3); /* Bank 3 */
/* Switch to 9346 mode and enable CS */
outb_reg3(dep, 1, 0x80 | 0x8);
cmd= 0x180 | (a & 0x3f); /* 1 1 0 a5 a4 a3 a2 a1 a0 */
for (i= 8; i >= 0; i--)
{
b= (cmd & (1 << i));
b= (b ? 2 : 0);
/* Cmd goes out on the rising edge of the clock */
outb_reg3(dep, 1, 0x80 | 0x8 | b);
outb_reg3(dep, 1, 0x80 | 0x8 | 0x4 | b);
}
outb_reg3(dep, 1, 0x80 | 0x8); /* End of cmd */
w= 0;
for (i= 0; i<16; i++)
{
w <<= 1;
/* Data is shifted out on the rising edge. Read at the
* falling edge.
*/
outb_reg3(dep, 1, 0x80 | 0x8 | 0x4);
outb_reg3(dep, 1, 0x80 | 0x8 | b);
b= inb_reg3(dep, 1);
w |= (b & 1);
}
outb_reg3(dep, 1, 0x80); /* drop CS */
outb_reg3(dep, 1, 0x00); /* back to normal */
outb_reg0(dep, DP_CR, CR_PS_P0); /* back to bank 0 */
return w;
}
static void ee_wen(dep)
dpeth_t *dep;
{
int b, i, cmd;
outb_reg0(dep, DP_CR, CR_PS_P3); /* Bank 3 */
/* Switch to 9346 mode and enable CS */
outb_reg3(dep, 1, 0x80 | 0x8);
cmd= 0x130; /* 1 0 0 1 1 x x x x */
for (i= 8; i >= 0; i--)
{
b= (cmd & (1 << i));
b= (b ? 2 : 0);
/* Cmd goes out on the rising edge of the clock */
outb_reg3(dep, 1, 0x80 | 0x8 | b);
outb_reg3(dep, 1, 0x80 | 0x8 | 0x4 | b);
}
outb_reg3(dep, 1, 0x80 | 0x8); /* End of cmd */
outb_reg3(dep, 1, 0x80); /* Drop CS */
micro_delay(1); /* Is this required? */
}
static void set_ee_word(dep, a, w)
dpeth_t *dep;
int a;
u16_t w;
{
int b, i, cmd;
outb_reg3(dep, 1, 0x80 | 0x8); /* Set CS */
cmd= 0x140 | (a & 0x3f); /* 1 0 1 a5 a4 a3 a2 a1 a0 */
for (i= 8; i >= 0; i--)
{
b= (cmd & (1 << i));
b= (b ? 2 : 0);
/* Cmd goes out on the rising edge of the clock */
outb_reg3(dep, 1, 0x80 | 0x8 | b);
outb_reg3(dep, 1, 0x80 | 0x8 | 0x4 | b);
}
for (i= 15; i >= 0; i--)
{
b= (w & (1 << i));
b= (b ? 2 : 0);
/* Cmd goes out on the rising edge of the clock */
outb_reg3(dep, 1, 0x80 | 0x8 | b);
outb_reg3(dep, 1, 0x80 | 0x8 | 0x4 | b);
}
outb_reg3(dep, 1, 0x80 | 0x8); /* End of data */
outb_reg3(dep, 1, 0x80); /* Drop CS */
micro_delay(1); /* Is this required? */
outb_reg3(dep, 1, 0x80 | 0x8); /* Set CS */
for (i= 0; i<10000; i++)
{
if (inb_reg3(dep, 1) & 1)
break;
micro_delay(1);
}
if (!(inb_reg3(dep, 1) & 1))
panic("set_ee_word: device remains busy");
}
static void ee_wds(dep)
dpeth_t *dep;
{
int b, i, cmd;
outb_reg0(dep, DP_CR, CR_PS_P3); /* Bank 3 */
/* Switch to 9346 mode and enable CS */
outb_reg3(dep, 1, 0x80 | 0x8);
cmd= 0x100; /* 1 0 0 0 0 x x x x */
for (i= 8; i >= 0; i--)
{
b= (cmd & (1 << i));
b= (b ? 2 : 0);
/* Cmd goes out on the rising edge of the clock */
outb_reg3(dep, 1, 0x80 | 0x8 | b);
outb_reg3(dep, 1, 0x80 | 0x8 | 0x4 | b);
}
outb_reg3(dep, 1, 0x80 | 0x8); /* End of cmd */
outb_reg3(dep, 1, 0x80); /* Drop CS */
outb_reg3(dep, 1, 0x00); /* back to normal */
outb_reg0(dep, DP_CR, CR_PS_P0); /* back to bank 0 */
}
#endif
#endif /* ENABLE_PCI */
/*
* $PchId: rtl8029.c,v 1.7 2004/08/03 12:16:58 philip Exp $
*/