minix/sys/dev/pci/amrreg.h

/*	$NetBSD: amrreg.h,v 1.5 2008/09/08 23:36:54 gmcgarry Exp $	*/

/*-
 * Copyright (c) 2002, 2003 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Andrew Doran.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*-
 * Copyright (c) 1999,2000 Michael Smith
 * Copyright (c) 2000 BSDi
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from FreeBSD: amrreg.h,v 1.2 2000/08/30 07:52:40 msmith Exp
 */

#ifndef	_PCI_AMRREG_H_
#define	_PCI_AMRREG_H_

#ifdef AMR_CRASH_ME
#define	AMR_MAX_CMDS		255		/* ident = 0 not allowed */
#else
#define	AMR_MAX_CMDS		120
#endif
#define	AMR_MAXLD      		40

#define	AMR_MAX_CMDS_PU		63

#define	AMR_MAX_SEGS		26
#define	AMR_MAX_CHANNEL		3
#define	AMR_MAX_TARGET		15
#define	AMR_MAX_LUN		7

#define	AMR_MAX_CDB_LEN		0x0a
#define	AMR_MAX_REQ_SENSE_LEN	0x20

#define	AMR_SECTOR_SIZE		512

/* Mailbox commands.*/
#define	AMR_CMD_LREAD		0x01
#define	AMR_CMD_LWRITE		0x02
#define	AMR_CMD_PASS		0x03
#define	AMR_CMD_EXT_ENQUIRY	0x04
#define	AMR_CMD_ENQUIRY		0x05
#define	AMR_CMD_FLUSH		0x0a
#define	AMR_CMD_EXT_ENQUIRY2	0x0c
#define	AMR_CMD_GET_MACHINEID	0x36
#define	AMR_CMD_GET_INITIATOR	0x7d	/* returns one byte */
#define	AMR_CMD_CONFIG		0xa1
#define	AMR_CONFIG_PRODUCT_INFO			0x0e
#define	AMR_CONFIG_ENQ3				0x0f
#define	AMR_CONFIG_ENQ3_SOLICITED_NOTIFY	0x01
#define	AMR_CONFIG_ENQ3_SOLICITED_FULL		0x02
#define	AMR_CONFIG_ENQ3_UNSOLICITED		0x03

/* Command completion status. */
#define	AMR_STATUS_SUCCESS	0x00
#define	AMR_STATUS_ABORTED	0x02
#define	AMR_STATUS_FAILED	0x80

/* Physical/logical drive states. */
#define	AMR_DRV_CURSTATE(x)	((x) & 0x0f)
#define	AMR_DRV_PREVSTATE(x)	(((x) >> 4) & 0x0f)
#define	AMR_DRV_OFFLINE		0x00
#define	AMR_DRV_DEGRADED	0x01
#define	AMR_DRV_OPTIMAL		0x02
#define	AMR_DRV_ONLINE		0x03
#define	AMR_DRV_FAILED		0x04
#define	AMR_DRV_REBUILD		0x05
#define	AMR_DRV_HOTSPARE	0x06

/* Logical drive properties. */
#define	AMR_DRV_RAID_MASK	0x0f	/* RAID level 0, 1, 3, 5, etc. */
#define	AMR_DRV_WRITEBACK	0x10	/* write-back enabled */
#define	AMR_DRV_READHEAD	0x20	/* readhead policy enabled */
#define	AMR_DRV_ADAPTIVE	0x40	/* adaptive I/O policy enabled */

/* Battery status. */
#define	AMR_BATT_MODULE_MISSING		0x01
#define	AMR_BATT_LOW_VOLTAGE		0x02
#define	AMR_BATT_TEMP_HIGH		0x04
#define	AMR_BATT_PACK_MISSING		0x08
#define	AMR_BATT_CHARGE_MASK		0x30
#define	AMR_BATT_CHARGE_DONE		0x00
#define	AMR_BATT_CHARGE_INPROG		0x10
#define	AMR_BATT_CHARGE_FAIL		0x20
#define	AMR_BATT_CYCLES_EXCEEDED	0x40

/*
 * 8LD firmware interface.
 */

/* Array constraints. */
#define	AMR_8LD_MAXDRIVES	8
#define	AMR_8LD_MAXCHAN		5
#define	AMR_8LD_MAXTARG		15
#define	AMR_8LD_MAXPHYSDRIVES	(AMR_8LD_MAXCHAN * AMR_8LD_MAXTARG)

/* Adapter information. */
struct amr_adapter_info {
	u_int8_t	aa_maxio;
	u_int8_t	aa_rebuild_rate;
	u_int8_t	aa_maxtargchan;
	u_int8_t	aa_channels;
	u_int8_t	aa_firmware[4];
	u_int16_t	aa_flashage;
	u_int8_t	aa_chipsetvalue;
	u_int8_t	aa_memorysize;
	u_int8_t	aa_cacheflush;
	u_int8_t	aa_bios[4];
	u_int8_t	aa_boardtype;
	u_int8_t	aa_scsisensealert;
	u_int8_t	aa_writeconfigcount;
	u_int8_t	aa_driveinsertioncount;
	u_int8_t	aa_inserteddrive;
	u_int8_t	aa_batterystatus;
	u_int8_t   	aa_res1;
} __packed;

/* Logical drive information. */
struct amr_logdrive_info {
	u_int8_t	al_numdrives;
	u_int8_t	al_res1[3];
	u_int32_t	al_size[AMR_8LD_MAXDRIVES];
	u_int8_t	al_properties[AMR_8LD_MAXDRIVES];
	u_int8_t	al_state[AMR_8LD_MAXDRIVES];
} __packed;

/* Physical drive information. */
struct amr_physdrive_info {
	/* Low nybble is current state, high nybble is previous state. */
	u_int8_t	ap_state[AMR_8LD_MAXPHYSDRIVES];
	u_int8_t	ap_predictivefailure;
} __packed;

/*
 * Enquiry response structure for AMR_CMD_ENQUIRY (e), AMR_CMD_EXT_ENQUIRY (x)
 * and AMR_CMD_EXT_ENQUIRY2 (2).
 */
struct amr_enquiry {
	struct		amr_adapter_info ae_adapter;		/* e x 2 */
	struct		amr_logdrive_info ae_ldrv;		/* e x 2 */
	struct		amr_physdrive_info ae_pdrv;		/* e x 2 */
	u_int8_t	ae_formatting[AMR_8LD_MAXDRIVES];	/*   x 2 */
	u_int8_t	res1[AMR_8LD_MAXDRIVES];		/*   x 2 */
	u_int32_t	ae_extlen;				/*     2 */
	u_int16_t	ae_subsystem;				/*     2 */
	u_int16_t	ae_subvendor;				/*     2 */
	u_int32_t	ae_signature;				/*     2 */
#define	AMR_SIG_431	0xfffe0001
#define	AMR_SIG_438	0xfffd0002
#define	AMR_SIG_762	0xfffc0003
#define	AMR_SIG_T5	0xfffb0004
#define	AMR_SIG_466	0xfffa0005
#define	AMR_SIG_467	0xfff90006
#define	AMR_SIG_T7	0xfff80007
#define	AMR_SIG_490	0xfff70008
	u_int8_t	res2[844];				/*     2 */
} __packed;

/*
 * 40LD firmware interface.
 */

/* Array constraints. */
#define	AMR_40LD_MAXDRIVES	40
#define	AMR_40LD_MAXCHAN	16
#define	AMR_40LD_MAXTARG	16
#define	AMR_40LD_MAXPHYSDRIVES	256

/* Product information structure. */
struct amr_prodinfo {
	u_int32_t	ap_size;		/* current size in bytes (not including resvd) */
	u_int32_t	ap_configsig;		/* default is 0x00282008, indicating 0x28 maximum
					 * logical drives, 0x20 maximum stripes and 0x08
					 * maximum spans */
	u_int8_t	ap_firmware[16];	/* printable identifiers */
	u_int8_t	ap_bios[16];
	u_int8_t	ap_product[80];
	u_int8_t	ap_maxio;		/* maximum number of concurrent commands supported */
	u_int8_t	ap_nschan;		/* number of SCSI channels present */
	u_int8_t	ap_fcloops;		/* number of fibre loops present */
	u_int8_t	ap_memtype;		/* memory type */
	u_int32_t	ap_signature;
	u_int16_t	ap_memsize;		/* onboard memory in MB */
	u_int16_t	ap_subsystem;		/* subsystem identifier */
	u_int16_t	ap_subvendor;		/* subsystem vendor ID */
	u_int8_t	ap_numnotifyctr;	/* number of notify counters */
} __packed;

/* Notify structure. */
struct amr_notify {
	u_int32_t	an_globalcounter;	/* change counter */

	u_int8_t	an_paramcounter;	/* parameter change counter */
	u_int8_t	an_paramid;
#define	AMR_PARAM_REBUILD_RATE		0x01	/* value = new rebuild rate */
#define	AMR_PARAM_FLUSH_INTERVAL	0x02	/* value = new flush interval */
#define	AMR_PARAM_SENSE_ALERT		0x03	/* value = last physical drive with check condition set */
#define	AMR_PARAM_DRIVE_INSERTED	0x04	/* value = last physical drive inserted */
#define	AMR_PARAM_BATTERY_STATUS	0x05	/* value = battery status */
	u_int16_t	an_paramval;

	u_int8_t	an_writeconfigcounter;	/* write config occurred */
	u_int8_t	res1[3];

	u_int8_t	an_ldrvopcounter;	/* logical drive operation started/completed */
	u_int8_t	an_ldrvopid;
	u_int8_t	an_ldrvopcmd;
#define	AMR_LDRVOP_CHECK	0x01
#define	AMR_LDRVOP_INIT		0x02
#define	AMR_LDRVOP_REBUILD	0x03
	u_int8_t	an_ldrvopstatus;
#define	AMR_LDRVOP_SUCCESS	0x00
#define	AMR_LDRVOP_FAILED	0x01
#define	AMR_LDRVOP_ABORTED	0x02
#define	AMR_LDRVOP_CORRECTED	0x03
#define	AMR_LDRVOP_STARTED	0x04

	u_int8_t	an_ldrvstatecounter;	/* logical drive state change occurred */
	u_int8_t	an_ldrvstateid;
	u_int8_t	an_ldrvstatenew;
	u_int8_t	an_ldrvstateold;

	u_int8_t	an_pdrvstatecounter;	/* physical drive state change occurred */
	u_int8_t	an_pdrvstateid;
	u_int8_t	an_pdrvstatenew;
	u_int8_t	an_pdrvstateold;

	u_int8_t	an_pdrvfmtcounter;
	u_int8_t	an_pdrvfmtid;
	u_int8_t	an_pdrvfmtval;
#define	AMR_FORMAT_START	0x01
#define	AMR_FORMAT_COMPLETE	0x02
	u_int8_t	res2;

	u_int8_t	an_targxfercounter;	/* scsi xfer rate change */
	u_int8_t	an_targxferid;
	u_int8_t	an_targxferval;
	u_int8_t	res3;

	u_int8_t	an_fcloopidcounter;	/* FC/AL loop ID changed */
	u_int8_t	an_fcloopidpdrvid;
	u_int8_t	an_fcloopid0;
	u_int8_t	an_fcloopid1;

	u_int8_t	an_fcloopstatecounter;	/* FC/AL loop status changed */
	u_int8_t	an_fcloopstate0;
	u_int8_t	an_fcloopstate1;
	u_int8_t	res4;
} __packed;

/* Enquiry3 structure. */
struct amr_enquiry3 {
	u_int32_t	ae_datasize;		/* valid data size in this structure */
	union {				/* event notify structure */
	struct amr_notify	n;
	u_int8_t		pad[0x80];
	} 		ae_notify;
	u_int8_t	ae_rebuildrate;		/* current rebuild rate in % */
	u_int8_t	ae_cacheflush;		/* flush interval in seconds */
	u_int8_t	ae_sensealert;
	u_int8_t	ae_driveinsertcount;	/* count of inserted drives */
	u_int8_t	ae_batterystatus;
	u_int8_t	ae_numldrives;
	u_int8_t	ae_reconstate[AMR_40LD_MAXDRIVES / 8];	/* reconstruction state */
	u_int16_t	ae_opstatus[AMR_40LD_MAXDRIVES / 8];	/* operation status per drive */
	u_int32_t	ae_drivesize[AMR_40LD_MAXDRIVES];	/* logical drive size */
	u_int8_t	ae_driveprop[AMR_40LD_MAXDRIVES];	/* logical drive properties */
	u_int8_t	ae_drivestate[AMR_40LD_MAXDRIVES];	/* physical drive state */
	u_int8_t	ae_pdrivestate[AMR_40LD_MAXPHYSDRIVES]; /* physical drive state */
	u_int16_t	ae_driveformat[AMR_40LD_MAXPHYSDRIVES];
	u_int8_t	ae_targxfer[80];			/* physical drive transfer rates */

	u_int8_t	res1[263];		/* pad to 1024 bytes */
} __packed;

/*
 * Mailbox and command structures.
 */

struct amr_mailbox_cmd {
	u_int8_t	mb_command;
	u_int8_t	mb_ident;
	u_int16_t	mb_blkcount;
	u_int32_t	mb_lba;
	u_int32_t	mb_physaddr;
	u_int8_t	mb_drive;
	u_int8_t	mb_nsgelem;
	u_int8_t	res1;
	u_int8_t	mb_busy;
} __packed;

struct amr_mailbox_resp {
	u_int8_t	mb_nstatus;
	u_int8_t	mb_status;
	u_int8_t	mb_completed[46];
}  __packed;

struct amr_mailbox {
	u_int32_t	mb_res1[3];
	u_int32_t	mb_segment;
	struct		amr_mailbox_cmd mb_cmd;
	struct		amr_mailbox_resp mb_resp;
	u_int8_t	mb_poll;
	u_int8_t	mb_ack;
	u_int8_t	res2[62];		/* Pad to 128+16 bytes. */
} __packed;

struct amr_mailbox_ioctl {
	u_int8_t	mb_command;
	u_int8_t	mb_ident;
	u_int8_t	mb_channel;
	u_int8_t	mb_param;
	u_int8_t	mb_pad[4];
	u_int32_t	mb_physaddr;
	u_int8_t	mb_drive;
	u_int8_t	mb_nsgelem;
	u_int8_t	res1;
	u_int8_t	mb_busy;
	u_int8_t	mb_nstatus;
	u_int8_t	mb_completed[46];
	u_int8_t	mb_poll;
	u_int8_t	mb_ack;
	u_int8_t	res4[16];
} __packed;

struct amr_sgentry {
	u_int32_t	sge_addr;
	u_int32_t	sge_count;
} __packed;

struct amr_passthrough {
	u_int8_t	ap_timeout:3;
	u_int8_t	ap_ars:1;
	u_int8_t	ap_dummy:3;
	u_int8_t	ap_islogical:1;
	u_int8_t	ap_logical_drive_no;
	u_int8_t	ap_channel;
	u_int8_t	ap_scsi_id;
	u_int8_t	ap_queue_tag;
	u_int8_t	ap_queue_action;
	u_int8_t	ap_cdb[AMR_MAX_CDB_LEN];
	u_int8_t	ap_cdb_length;
	u_int8_t	ap_request_sense_length;
	u_int8_t	ap_request_sense_area[AMR_MAX_REQ_SENSE_LEN];
	u_int8_t	ap_no_sg_elements;
	u_int8_t	ap_scsi_status;
	u_int32_t	ap_data_transfer_address;
	u_int32_t	ap_data_transfer_length;
} __packed;

/*
 * "Quartz" i960 PCI bridge interface.
 */

#define	AMR_QUARTZ_SIG_REG	0xa0
#define	AMR_QUARTZ_SIG0		0xcccc
#define	AMR_QUARTZ_SIG1		0x3344

/* Doorbell registers. */
#define	AMR_QREG_IDB		0x20
#define	AMR_QREG_ODB		0x2c

#define	AMR_QIDB_SUBMIT		0x00000001	/* mailbox ready for work */
#define	AMR_QIDB_ACK		0x00000002	/* mailbox done */
#define	AMR_QODB_READY		0x10001234	/* work ready to be processed */

/*
 * Old-style ("standard") ASIC bridge interface.
 */

/* I/O registers. */
#define	AMR_SREG_CMD		0x10	/* Command/ack register (w) */
#define	AMR_SREG_MBOX_BUSY	0x10	/* Mailbox status (r) */
#define	AMR_SREG_TOGL		0x11	/* Interrupt enable */
#define	AMR_SREG_MBOX		0x14	/* Mailbox physical address */
#define	AMR_SREG_MBOX_ENABLE	0x18	/* Atomic mailbox address enable */
#define	AMR_SREG_INTR		0x1a	/* Interrupt status */

/* I/O magic numbers. */
#define	AMR_SCMD_POST		0x10	/* in SCMD to initiate action on mailbox */
#define	AMR_SCMD_ACKINTR	0x08	/* in SCMD to ack mailbox retrieved */
#define	AMR_STOGL_ENABLE	0xc0	/* in STOGL */
#define	AMR_SINTR_VALID		0x40	/* in SINTR */
#define	AMR_SMBOX_BUSY_FLAG	0x10	/* in SMBOX_BUSY */
#define	AMR_SMBOX_ENABLE_ADDR	0x00	/* in SMBOX_ENABLE */

#endif	/* !_PCI_AMRREG_H_ */