sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
minix/drivers/ti1225/ti1225.c

519 lines
11 KiB
C
Raw Normal View History

Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
/*
ti1225.c
Created: Dec 2005 by Philip Homburg
*/
Convert drivers/ and servers/ over to bsdmake -Move libdriver to lib/ -Install all boot image services on filesystem to aid restartability
2010-03-22 22:25:22 +01:00
#include <minix/drivers.h>
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
#include <minix/driver.h>
Include directory reorg and makefile updates. -Convert the include directory over to using bsdmake syntax -Update/add mkfiles -Modify install(1) so that it can create symlinks -Update makefiles to use new install(1) options -Rename /usr/include/ibm to /usr/include/i386 -Create /usr/include/machine symlink to arch header files -Move vm_i386.h to its new home in the /usr/include/i386 -Update source files to #include the header files at their new homes. -Add new gnu-includes target for building GCC headers
2010-03-08 12:04:59 +01:00
#include <machine/pci.h>
#include <machine/vm.h>
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
#include "ti1225.h"
#include "i82365.h"
/* The use of interrupts is not yet ready for prime time */
#define USE_INTS 0
#define NR_PORTS 2
PRIVATE struct port
{
unsigned p_flags;
int p_devind;
u8_t p_cb_busnr;
u16_t p_exca_port;
#if USE_INTS
int p_irq;
int p_hook;
#endif
char *base_ptr;
volatile struct csr *csr_ptr;
Basic VM and other minor improvements. Not complete, probably not fully debugged or optimized.
2008-11-19 13:26:10 +01:00
char buffer[2*I386_PAGE_SIZE];
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
} ports[NR_PORTS];
#define PF_PRESENT 1
struct pcitab
{
u16_t vid;
u16_t did;
int checkclass;
};
PRIVATE struct pcitab pcitab_ti[]=
{
{ 0x104C, 0xAC1C, 0 }, /* TI PCI1225 */
{ 0x0000, 0x0000, 0 }
};
PRIVATE char *progname;
PRIVATE int debug;
FORWARD _PROTOTYPE( void hw_init, (struct port *pp) );
FORWARD _PROTOTYPE( void map_regs, (struct port *pp, u32_t base) );
FORWARD _PROTOTYPE( void do_int, (struct port *pp) );
FORWARD _PROTOTYPE( void do_outb, (port_t port, u8_t value) );
FORWARD _PROTOTYPE( u8_t do_inb, (port_t port) );
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* SEF functions and variables. */
FORWARD _PROTOTYPE( void sef_local_startup, (void) );
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
FORWARD _PROTOTYPE( int sef_cb_init_fresh, (int type, sef_init_info_t *info) );
EXTERN int env_argc;
EXTERN char **env_argv;
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/*===========================================================================*
* main *
*===========================================================================*/
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
int main(int argc, char *argv[])
{
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
int r;
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
message m;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
int ipc_status;
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* SEF local startup. */
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
env_setargs(argc, argv);
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
sef_local_startup();
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
for (;;)
{
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
r= driver_receive(ANY, &m, &ipc_status);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
if (r != OK)
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
panic("driver_receive failed: %d", r);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
printf("ti1225: got message %u from %d\n",
m.m_type, m.m_source);
}
return 0;
}
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/*===========================================================================*
* sef_local_startup *
*===========================================================================*/
PRIVATE void sef_local_startup()
{
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/* Register init callbacks. */
sef_setcb_init_fresh(sef_cb_init_fresh);
sef_setcb_init_lu(sef_cb_init_fresh);
sef_setcb_init_restart(sef_cb_init_fresh);
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* Register live update callbacks. */
sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready);
sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_standard);
/* Let SEF perform startup. */
sef_startup();
}
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/*===========================================================================*
* sef_cb_init_fresh *
*===========================================================================*/
PRIVATE int sef_cb_init_fresh(int type, sef_init_info_t *info)
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
{
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/* Initialize the ti1225 driver. */
int c, i, r, first, devind, port;
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
u16_t vid, did;
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
(progname=strrchr(env_argv[0],'/')) ? progname++
: (progname=env_argv[0]);
Merge of Wu's GSOC 09 branch (src.20090525.r4372.wu) Main changes: - COW optimization for safecopy. - safemap, a grant-based interface for sharing memory regions between processes. - Integration with safemap and complete rework of DS, supporting new data types natively (labels, memory ranges, memory mapped ranges). - For further information: http://wiki.minix3.org/en/SummerOfCode2009/MemoryGrants Additional changes not included in the original Wu's branch: - Fixed unhandled case in VM when using COW optimization for safecopy in case of a block that has already been shared as SMAP. - Better interface and naming scheme for sys_saferevmap and ds_retrieve_map calls. - Better input checking in syslib: check for page alignment when creating memory mapping grants. - DS notifies subscribers when an entry is deleted. - Documented the behavior of indirect grants in case of memory mapping. - Test suite in /usr/src/test/safeperf|safecopy|safemap|ds/* reworked and extended. - Minor fixes and general cleanup. - TO-DO: Grant ids should be generated and managed the way endpoints are to make sure grant slots are never misreused.
2010-01-14 16:24:16 +01:00
if((r=tsc_calibrate()) != OK)
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
panic("tsc_calibrate failed: %d", r);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
debug= 0;
while (c= getopt(env_argc, env_argv, "d?"), c != -1)
{
switch(c)
{
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
case '?': panic("Usage: ti1225 [-d]");
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
case 'd': debug++; break;
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
default: panic("getopt failed");
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
}
}
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
pci_init1(progname);
first= 1;
port= 0;
for (;;)
{
if (first)
{
first= 0;
r= pci_first_dev(&devind, &vid, &did);
}
else
r= pci_next_dev(&devind, &vid, &did);
if (r != 1)
break;
for (i= 0; pcitab_ti[i].vid != 0; i++)
{
if (pcitab_ti[i].vid != vid)
continue;
if (pcitab_ti[i].did != did)
continue;
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
if (pcitab_ti[i].checkclass) {
panic("fxp_probe: class check not implemented");
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
}
break;
}
if (pcitab_ti[i].vid == 0)
continue;
pci_reserve(devind);
if (debug)
printf("ti1225: found device %04x/%04x\n", vid, did);
ports[port].p_devind= devind;
ports[port].p_flags |= PF_PRESENT;
port++;
if (port >= NR_PORTS)
break;
}
for (i= 0; i<NR_PORTS; i++)
{
if (!(ports[i].p_flags & PF_PRESENT))
continue;
hw_init(&ports[i]);
}
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
/* Announce we are up! */
driver_announce();
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
return(OK);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
}
Removed some unused variables and functions.
2010-06-02 21:41:38 +02:00
PRIVATE void hw_init(struct port *pp)
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
{
Removed unused variables, added const where possible.
2010-04-07 13:25:51 +02:00
int r, devind, irq;
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
u8_t v8;
u16_t v16;
u32_t v32;
devind= pp->p_devind;
if (debug)
printf("hw_init: devind = %d\n", devind);
if (debug)
{
v16= pci_attr_r16(devind, PCI_CR);
printf("ti1225: command register 0x%x\n", v16);
}
v32= pci_attr_r32(devind, TI_CB_BASEADDR);
if (debug)
printf("ti1225: Cardbus/ExCA base address 0x%x\n", v32);
map_regs(pp, v32);
pp->csr_ptr= (struct csr *)pp->base_ptr;
if (debug)
{
v8= pci_attr_r8(devind, TI_PCI_BUS_NR);
printf("ti1225: PCI bus number %d\n", v8);
}
v8= pci_attr_r8(devind, TI_CB_BUS_NR);
pp->p_cb_busnr= v8;
if (debug)
{
printf("ti1225: CardBus bus number %d\n", v8);
v8= pci_attr_r8(devind, TI_SO_BUS_NR);
printf("ti1225: Subordinate bus number %d\n", v8);
}
#if USE_INTS
irq= pci_attr_r8(devind, PCI_ILR);
pp->p_irq= irq;
printf("ti1225 using IRQ %d\n", irq);
#endif
v32= pci_attr_r32(devind, TI_LEGACY_BA);
v32 &= ~1;
if (debug)
{
printf("ti1225: PC Card 16-bit legacy-mode base address 0x%x\n",
v32);
}
if (v32 == 0)
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
panic("bad legacy-mode base address: %d", v32);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
pp->p_exca_port= v32;
if (debug)
{
v32= pci_attr_r32(devind, TI_MF_ROUTE);
printf("ti1225: Multifunction routing 0x%08x\n", v32);
}
#if USE_INTS
pp->p_hook = pp->p_irq;
r= sys_irqsetpolicy(pp->p_irq, 0, &pp->p_hook);
if (r != OK)
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
panic("sys_irqsetpolicy failed: %d", r);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
#endif
/* Clear CBB_BC_INTEXCA */
v16= pci_attr_r16(devind, CBB_BRIDGECTRL);
if (debug)
printf("ti1225: Bridge control 0x%04x\n", v16);
v16 &= ~CBB_BC_INTEXCA;
pci_attr_w16(devind, CBB_BRIDGECTRL, v16);
if (debug)
{
v32= pci_attr_r32(devind, TI_SYSCTRL);
printf("ti1225: System Control Register 0x%08x\n", v32);
v8= pci_attr_r8(devind, TI_CARD_CTRL);
printf("ti1225: Card Control 0x%02x\n", v8);
v8= pci_attr_r8(devind, TI_DEV_CTRL);
printf("ti1225: Device Control 0x%02x\n", v8);
}
/* Enable socket interrupts */
pp->csr_ptr->csr_mask |= CM_PWRMASK | CM_CDMASK | CM_CSTSMASK;
do_int(pp);
#if USE_INTS
r= sys_irqenable(&pp->p_hook);
if (r != OK)
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
panic("unable enable interrupts: %d", r);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
#endif
}
Remove useless variables and the computations on them.
2010-02-19 11:00:32 +01:00
PRIVATE void map_regs(struct port *pp, u32_t base)
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
{
int r;
vir_bytes buf_base;
buf_base= (vir_bytes)pp->buffer;
Basic VM and other minor improvements. Not complete, probably not fully debugged or optimized.
2008-11-19 13:26:10 +01:00
if (buf_base % I386_PAGE_SIZE)
buf_base += I386_PAGE_SIZE-(buf_base % I386_PAGE_SIZE);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
pp->base_ptr= (char *)buf_base;
if (debug)
{
printf("ti1225: map_regs: using %p for %p\n",
pp->base_ptr, pp->buffer);
}
/* Clear low order bits in base */
base &= ~(u32_t)0xF;
Basic VM and other minor improvements. Not complete, probably not fully debugged or optimized.
2008-11-19 13:26:10 +01:00
#if 0
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
r= sys_vm_map(SELF, 1 /* map */, (vir_bytes)pp->base_ptr,
Basic VM and other minor improvements. Not complete, probably not fully debugged or optimized.
2008-11-19 13:26:10 +01:00
I386_PAGE_SIZE, (phys_bytes)base);
#else
r = ENOSYS;
#endif
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
if (r != OK)
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
panic("map_regs: sys_vm_map failed: %d", r);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
}
Removed some unused variables and functions.
2010-06-02 21:41:38 +02:00
PRIVATE void do_int(struct port *pp)
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
{
Removed unused variables, added const where possible.
2010-04-07 13:25:51 +02:00
int r, devind, vcc_5v, vcc_3v, vcc_Xv, vcc_Yv,
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
socket_5v, socket_3v, socket_Xv, socket_Yv;
libsys: add standard condition spinning primitives
2010-07-13 01:14:40 +02:00
spin_t spin;
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
u32_t csr_event, csr_present, csr_control;
u8_t v8;
u16_t v16;
devind= pp->p_devind;
v8= pci_attr_r8(devind, TI_CARD_CTRL);
if (v8 & TI_CCR_IFG)
{
Removed superfluous argument.
2008-02-21 17:09:58 +01:00
printf("ti1225: got functional interrupt\n");
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
pci_attr_w8(devind, TI_CARD_CTRL, v8);
}
if (debug)
{
printf("Socket event: 0x%x\n", pp->csr_ptr->csr_event);
printf("Socket mask: 0x%x\n", pp->csr_ptr->csr_mask);
}
csr_present= pp->csr_ptr->csr_present;
csr_control= pp->csr_ptr->csr_control;
if ((csr_present & (CP_CDETECT1|CP_CDETECT2)) != 0)
{
if (debug)
printf("do_int: no card present\n");
return;
}
if (csr_present & CP_BADVCCREQ)
{
printf("do_int: Bad Vcc request\n");
/* return; */
}
if (csr_present & CP_DATALOST)
{
/* Do we care? */
if (debug)
printf("do_int: Data lost\n");
/* return; */
}
if (csr_present & CP_NOTACARD)
{
printf("do_int: Not a card\n");
return;
}
if (debug)
{
if (csr_present & CP_CBCARD)
printf("do_int: Cardbus card detected\n");
if (csr_present & CP_16BITCARD)
printf("do_int: 16-bit card detected\n");
}
if (csr_present & CP_PWRCYCLE)
{
if (debug)
printf("do_int: powered up\n");
return;
}
vcc_5v= !!(csr_present & CP_5VCARD);
vcc_3v= !!(csr_present & CP_3VCARD);
vcc_Xv= !!(csr_present & CP_XVCARD);
vcc_Yv= !!(csr_present & CP_YVCARD);
if (debug)
{
printf("do_int: card supports:%s%s%s%s\n",
vcc_5v ? " 5V" : "", vcc_3v ? " 3V" : "",
vcc_Xv ? " X.X V" : "", vcc_Yv ? " Y.Y V" : "");
}
socket_5v= !!(csr_present & CP_5VSOCKET);
socket_3v= !!(csr_present & CP_3VSOCKET);
socket_Xv= !!(csr_present & CP_XVSOCKET);
socket_Yv= !!(csr_present & CP_YVSOCKET);
if (debug)
{
printf("do_int: socket supports:%s%s%s%s\n",
socket_5v ? " 5V" : "", socket_3v ? " 3V" : "",
socket_Xv ? " X.X V" : "", socket_Yv ? " Y.Y V" : "");
}
if (vcc_5v && socket_5v)
{
csr_control= (csr_control & ~CC_VCCCTRL) | CC_VCC_5V;
pp->csr_ptr->csr_control= csr_control;
if (debug)
printf("do_int: applying 5V\n");
}
else if (vcc_3v && socket_3v)
{
csr_control= (csr_control & ~CC_VCCCTRL) | CC_VCC_3V;
pp->csr_ptr->csr_control= csr_control;
if (debug)
printf("do_int: applying 3V\n");
}
else if (vcc_Xv && socket_Xv)
{
csr_control= (csr_control & ~CC_VCCCTRL) | CC_VCC_XV;
pp->csr_ptr->csr_control= csr_control;
printf("do_int: applying X.X V\n");
}
else if (vcc_Yv && socket_Yv)
{
csr_control= (csr_control & ~CC_VCCCTRL) | CC_VCC_YV;
pp->csr_ptr->csr_control= csr_control;
printf("do_int: applying Y.Y V\n");
}
else
{
printf("do_int: socket and card are not compatible\n");
return;
}
csr_event= pp->csr_ptr->csr_event;
if (csr_event)
{
if (debug)
printf("clearing socket event\n");
pp->csr_ptr->csr_event= csr_event;
if (debug)
{
printf("Socket event (cleared): 0x%x\n",
pp->csr_ptr->csr_event);
}
}
devind= pp->p_devind;
v8= pci_attr_r8(devind, TI_CARD_CTRL);
if (v8 & TI_CCR_IFG)
{
Fix printfs with too few or too many parms, remove unused vars, fix incorrect flag tests, other code cleanup.
2010-04-01 15:25:05 +02:00
printf("ti1225: got functional interrupt\n");
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
pci_attr_w8(devind, TI_CARD_CTRL, v8);
}
if (debug)
{
v8= pci_attr_r8(devind, TI_CARD_CTRL);
printf("TI_CARD_CTRL: 0x%02x\n", v8);
}
libsys: add standard condition spinning primitives
2010-07-13 01:14:40 +02:00
spin_init(&spin, 100000);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
do {
csr_present= pp->csr_ptr->csr_present;
if (csr_present & CP_PWRCYCLE)
break;
libsys: add standard condition spinning primitives
2010-07-13 01:14:40 +02:00
} while (spin_check(&spin));
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
if (!(csr_present & CP_PWRCYCLE))
{
printf("do_int: not powered up?\n");
return;
}
/* Reset device */
v16= pci_attr_r16(devind, CBB_BRIDGECTRL);
v16 |= CBB_BC_CRST;
pci_attr_w16(devind, CBB_BRIDGECTRL, v16);
/* Wait one microsecond. Is this correct? What are the specs? */
micro_delay(1);
/* Clear CBB_BC_CRST */
v16= pci_attr_r16(devind, CBB_BRIDGECTRL);
v16 &= ~CBB_BC_CRST;
pci_attr_w16(devind, CBB_BRIDGECTRL, v16);
/* Wait one microsecond after clearing the reset line. Is this
* correct? What are the specs?
*/
micro_delay(1);
pci_rescan_bus(pp->p_cb_busnr);
#if USE_INTS
r= sys_irqenable(&pp->p_hook);
if (r != OK)
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
panic("unable enable interrupts: %d", r);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
#endif
}
PRIVATE u8_t do_inb(port_t port)
{
int r;
u32_t value;
r= sys_inb(port, &value);
if (r != OK)
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
panic("sys_inb failed: %d", r);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
return value;
}
PRIVATE void do_outb(port_t port, u8_t value)
{
int r;
r= sys_outb(port, value);
if (r != OK)
panic() cleanup. this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
2010-03-05 16:05:11 +01:00
panic("sys_outb failed: %d", r);
Initial version of Cardbus support with the TI1225 Cardbus controler.
2006-01-12 15:47:48 +01:00
}
Reference in a new issue Copy permalink