minix/lib/libcurses/PSD.doc/doc.III

.\"	$NetBSD: doc.III,v 1.5 2003/08/07 16:44:27 agc Exp $
.\"
.\" Copyright (c) 1980, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	@(#)doc.III	8.1 (Berkeley) 6/4/93
.\"
.Ds
.Fd baudrate "" \*m
.De
Returns the output baud rate of the terminal.
This is a system dependent constant
(defined in
.b <sys/tty.h>
on BSD systems,
which is included by
.b <curses.h> ).
.Ds
.Fd delwin win
WINDOW	*win;
.De
Deletes the window from existence.
All resources are freed for future use by
.b calloc (3).
If a window has a
.Fn subwin
allocated window inside of it,
deleting the outer window
the subwindow is not affected,
even though this does invalidate it.
Therefore,
subwindows should be deleted before their
outer windows are.
.Ds
.Fd endwin
.De
Finish up window routines before exit.
This restores the terminal to the state it was before
.Fn initscr
(or
.Fn gettmode
and
.Fn setterm )
was called.
It should always be called before exiting.
It does not exit.
This is especially useful for resetting tty stats
when trapping rubouts via
.b signal (2).
.Ds
.Fd erasechar "" \*m
.De
Returns the erase character
for the terminal,
.i i.e. ,
the character used by the user to erase a single character from the input.
.Ds
.Fd getcap str "" "char *"
char	*str;
.De
Return a pointer to the
.b termcap
capability described by
.Vn str
(see
.b termcap (5)
for details).
.Ds
.Fd getyx win\*,y\*,x \*m
WINDOW	*win;
int	y\*,x;
.De
Puts the current \*y of
.Vn win
in the variables
.Vn y
and
.Vn x .
Since it is a macro,
not a function,
you do not pass the address
of
.Vn y
and
.Vn x .
.Ds
.Fd inch "" \*m
.Fd winch win \*m
WINDOW	*win;
.De
Returns the character at the current \*(y
on the given window.
This does not make any changes to the window.
.Ds
.Fd initscr
.De
Initialize the screen routines.
This must be called before any of the screen routines are used.
It initializes the terminal-type data and such,
and without it none of the routines can operate.
If standard input is not a tty,
it sets the specifications to the terminal
whose name is pointed to by
.Vn Def\*_term
(initialy "dumb").
If the boolean
.Vn My\*_term
is true,
.Vn Def\*_term
is always used.
If the system supports the
.b TIOCGWINSZ
.Fn ioctl "" "" 2
call,
it is used to get the number of lines and columns for the terminal,
otherwise it is taken from the
.b termcap
description.
.Ds
.Fd killchar "" \*m
.De
Returns the line kill character
for the terminal,
.i i.e. ,
the character used by the user to erase an entire line from the input.
.Ds
.Fd leaveok win\*,boolf \*m
WINDOW	*win;
bool	boolf;
.De
Sets the boolean flag for leaving the cursor after the last change.
If
.Vn boolf
is TRUE,
the cursor will be left after the last update on the terminal,
and the current \*y for
.Vn win
will be changed accordingly.
If it is FALSE,
it will be moved to the current \*y.
This flag
(initialy FALSE)
retains its value until changed by the user.
.Ds
.Fd longname termbuf\*,name
char	*termbuf\*,*name;
.Fd fullname termbuf\*,name
char	*termbuf\*,*name;
.De
.Fn longname
fills in
.Vn name
with the long name of the terminal described by the
.b termcap
entry in
.Vn termbuf .
It is generally of little use,
but is nice for telling the user in a readable format what terminal
we think he has.
This is available in the global variable
.Vn ttytype .
.Vn termbuf
is usually set via the termlib routine
.Fn tgetent .
.Fn fullname
is the same as
.Fn longname ,
except that it gives the fullest name given in the entry,
which can be quite verbose.
.Ds
.Fd mvwin win\*,y\*,x
WINDOW	*win;
int	y, x;
.De
Move the home position of the window
.Vn win
from its current starting coordinates
to
.Vn y\*,x ). (
If that would put part or all of the window
off the edge of the terminal screen,
.Fn mvwin
returns ERR and does not change anything.
For subwindows,
.Fn mvwin
also returns ERR if you attempt to move it off its main window.
If you move a main window,
all subwindows are moved along with it.
.Ds
.Fd newwin lines\*,cols\*,begin\*_y\*,begin\*_x "" "WINDOW *"
int	lines\*,cols\*,begin\*_y\*,begin\*_x;
.De
Create a new window with
.Vn lines
lines and
.Vn cols
columns starting at position
.Vn begin\*_y\*,begin\*_x ). (
If either
.Vn lines
or
.Vn cols
is 0 (zero),
that dimension will be set to
.Vn "LINES \- begin\*_y" ) (
or
.Vn "COLS \- begin\*_x" ) (
respectively.
Thus, to get a new window of dimensions
.Vn LINES
\(mu
.Vn COLS ,
use
.Fn newwin . "" 0\*,0\*,0\*,0
.Ds
.Fd nl "" \*m
.Fd nonl "" \*m
.De
Set or unset the terminal to/from nl mode,
.i i.e. ,
start/stop the system from mapping
.b <RETURN>
to
.b <LINE-FEED> .
If the mapping is not done,
.Fn refresh
can do more optimization,
so it is recommended, but not required, to turn it off.
.Ds
.Fd scrollok win\*,boolf \*m
WINDOW	*win;
bool	boolf;
.De
Set the scroll flag for the given window.
If
.Vn boolf
is FALSE, scrolling is not allowed.
This is its default setting.
.Ds
.Fd touchline win\*,y\*,startx\*,endx
WINDOW	*win;
int	y\*,startx\*,endx;
.De
This function performs a function similar to
.Fn touchwin
on a single line.
It marks the first change for the given line
to be
.Vn startx ,
if it is before the current first change mark,
and
the last change mark is set to be
.Vn endx
if it is currently less than
.Vn endx .
.Ds
.Fd touchoverlap win1\*,win2
WINDOW	*win1, *win2;
.De
Touch the window
.Vn win2
in the area which overlaps with
.Vn win1 .
If they do not overlap,
no changes are made.
.Ds
.Fd touchwin win
WINDOW	*win;
.De
Make it appear that the every location on the window
has been changed.
This is usually only needed for refreshes with overlapping windows.
.Ds
.Fd subwin win\*,lines\*,cols\*,begin\*_y\*,begin\*_x "" "WINDOW *"
WINDOW	*win;
int	lines\*,cols\*,begin\*_y\*,begin\*_x;
.De
Create a new window with
.Vn lines
lines and
.Vn cols
columns starting at position
.Vn begin\*_y\*,begin\*_x ) (
inside the window
.i win .
This means that any change made to either window
in the area covered
by the subwindow will be made on both windows.
.Vn begin\*_y\*,begin\*_x
are specified relative to the overall screen,
not the relative (0\*,0) of
.Vn win .
If either
.Vn lines
or
.Vn cols
is 0 (zero),
that dimension will be set to
.Vn "LINES \- begin\*_y" ) (
or
.Vn "COLS \- begin\*_x" ) (
respectively.
.Ds
.Fd unctrl ch \*m
char	ch;
.De
This is actually a debug function for the library,
but it is of general usefulness.
It returns a string which is a representation of
.Vn ch .
Control characters become their upper-case equivalents preceded by a "^".
Other letters stay just as they are.
To use
.Fn unctrl ,
you may have to have
.b #include\ <unctrl.h>
in your file.