minix/servers/vfs/worker.c

470 lines
14 KiB
C
Raw Normal View History

2011-08-17 15:23:45 +02:00
#include "fs.h"
#include <assert.h>
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void worker_get_work(void);
2012-03-25 20:25:53 +02:00
static void *worker_main(void *arg);
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void worker_sleep(void);
2012-03-25 20:25:53 +02:00
static void worker_wake(struct worker_thread *worker);
static mthread_attr_t tattr;
2011-08-17 15:23:45 +02:00
#ifdef MKCOVERAGE
# define TH_STACKSIZE (40 * 1024)
2011-08-17 15:23:45 +02:00
#else
# define TH_STACKSIZE (28 * 1024)
2011-08-17 15:23:45 +02:00
#endif
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
#define ASSERTW(w) assert((w) >= &workers[0] && (w) < &workers[NR_WTHREADS])
2011-08-17 15:23:45 +02:00
/*===========================================================================*
* worker_init *
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
void worker_init(void)
2011-08-17 15:23:45 +02:00
{
/* Initialize worker thread */
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
struct worker_thread *wp;
int i;
threads_init();
if (mthread_attr_init(&tattr) != 0)
panic("failed to initialize attribute");
if (mthread_attr_setstacksize(&tattr, TH_STACKSIZE) != 0)
panic("couldn't set default thread stack size");
if (mthread_attr_setdetachstate(&tattr, MTHREAD_CREATE_DETACHED) != 0)
panic("couldn't set default thread detach state");
pending = 0;
for (i = 0; i < NR_WTHREADS; i++) {
wp = &workers[i];
wp->w_fp = NULL; /* Mark not in use */
wp->w_next = NULL;
if (mutex_init(&wp->w_event_mutex, NULL) != 0)
panic("failed to initialize mutex");
if (cond_init(&wp->w_event, NULL) != 0)
panic("failed to initialize conditional variable");
if (mthread_create(&wp->w_tid, &tattr, worker_main, (void *) wp) != 0)
panic("unable to start thread");
2011-08-17 15:23:45 +02:00
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Let all threads get ready to accept work. */
yield_all();
2011-08-17 15:23:45 +02:00
}
/*===========================================================================*
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
* worker_get_work *
2011-08-17 15:23:45 +02:00
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void worker_get_work(void)
2011-08-17 15:23:45 +02:00
{
/* Find new work to do. Work can be 'queued', 'pending', or absent. In the
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
* latter case wait for new work to come in.
*/
2011-08-17 15:23:45 +02:00
struct fproc *rfp;
/* Do we have queued work to do? */
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
if (pending > 0) {
2011-08-17 15:23:45 +02:00
/* Find pending work */
for (rfp = &fproc[0]; rfp < &fproc[NR_PROCS]; rfp++) {
if (rfp->fp_flags & FP_PENDING) {
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
self->w_fp = rfp;
rfp->fp_worker = self;
2011-08-17 15:23:45 +02:00
rfp->fp_flags &= ~FP_PENDING; /* No longer pending */
pending--;
assert(pending >= 0);
return;
}
}
panic("Pending work inconsistency");
}
/* Wait for work to come to us */
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
worker_sleep();
2011-08-17 15:23:45 +02:00
}
/*===========================================================================*
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
* worker_available *
2011-08-17 15:23:45 +02:00
*===========================================================================*/
2012-03-25 20:25:53 +02:00
int worker_available(void)
2011-08-17 15:23:45 +02:00
{
int busy, i;
busy = 0;
for (i = 0; i < NR_WTHREADS; i++) {
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
if (workers[i].w_fp != NULL)
2011-08-17 15:23:45 +02:00
busy++;
}
return(NR_WTHREADS - busy);
}
/*===========================================================================*
* worker_main *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
static void *worker_main(void *arg)
2011-08-17 15:23:45 +02:00
{
/* Worker thread main loop */
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
self = (struct worker_thread *) arg;
ASSERTW(self);
2011-08-17 15:23:45 +02:00
while(TRUE) {
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
worker_get_work();
fp = self->w_fp;
assert(fp->fp_worker == self);
/* Lock the process. */
lock_proc(fp);
/* The following two blocks could be run in a loop until both the
* conditions are no longer met, but it is currently impossible that
* more normal work is present after postponed PM work has been done.
*/
2011-08-17 15:23:45 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Perform normal work, if any. */
if (fp->fp_func != NULL) {
self->w_msg = fp->fp_msg;
err_code = OK;
fp->fp_func();
fp->fp_func = NULL; /* deliberately unset AFTER the call */
2011-08-17 15:23:45 +02:00
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Perform postponed PM work, if any. */
if (fp->fp_flags & FP_PM_WORK) {
self->w_msg = fp->fp_pm_msg;
service_pm_postponed();
2011-08-17 15:23:45 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
fp->fp_flags &= ~FP_PM_WORK;
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Perform cleanup actions. */
thread_cleanup();
2011-08-17 15:23:45 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
unlock_proc(fp);
2011-08-17 15:23:45 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
fp->fp_worker = NULL;
self->w_fp = NULL;
2011-08-17 15:23:45 +02:00
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
return(NULL); /* Unreachable */
2011-08-17 15:23:45 +02:00
}
/*===========================================================================*
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
* worker_can_start *
2011-08-17 15:23:45 +02:00
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
int worker_can_start(struct fproc *rfp)
2011-08-17 15:23:45 +02:00
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Return whether normal (non-PM) work can be started for the given process.
* This function is used to serialize invocation of "special" procedures, and
* not entirely safe for other cases, as explained in the comments below.
*/
int is_pending, is_active, has_normal_work, has_pm_work;
is_pending = (rfp->fp_flags & FP_PENDING);
is_active = (rfp->fp_worker != NULL);
has_normal_work = (rfp->fp_func != NULL);
has_pm_work = (rfp->fp_flags & FP_PM_WORK);
/* If there is no work scheduled for the process, we can start work. */
if (!is_pending && !is_active) return TRUE;
/* If there is already normal work scheduled for the process, we cannot add
* more, since we support only one normal job per process.
*/
if (has_normal_work) return FALSE;
/* If this process has pending PM work but no normal work, we can add the
* normal work for execution before the worker will start.
*/
if (is_pending) return TRUE;
/* However, if a worker is active for PM work, we cannot add normal work
* either, because the work will not be considered. For this reason, we can
* not use this function for processes that can possibly get postponed PM
* work. It is still safe for core system processes, though.
*/
return FALSE;
2011-08-17 15:23:45 +02:00
}
/*===========================================================================*
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
* worker_try_activate *
2011-08-17 15:23:45 +02:00
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void worker_try_activate(struct fproc *rfp, int use_spare)
2011-08-17 15:23:45 +02:00
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* See if we can wake up a thread to do the work scheduled for the given
* process. If not, mark the process as having pending work for later.
*/
int i, available, needed;
2011-08-17 15:23:45 +02:00
struct worker_thread *worker;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Use the last available thread only if requested. Otherwise, leave at least
* one spare thread for deadlock resolution.
*/
needed = use_spare ? 1 : 2;
2011-08-17 15:23:45 +02:00
worker = NULL;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
for (i = available = 0; i < NR_WTHREADS; i++) {
if (workers[i].w_fp == NULL) {
if (worker == NULL)
worker = &workers[i];
if (++available >= needed)
break;
2011-08-17 15:23:45 +02:00
}
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
if (available >= needed) {
assert(worker != NULL);
rfp->fp_worker = worker;
worker->w_fp = rfp;
2011-08-17 15:23:45 +02:00
worker_wake(worker);
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
} else {
rfp->fp_flags |= FP_PENDING;
pending++;
2011-08-17 15:23:45 +02:00
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
}
2011-08-17 15:23:45 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/*===========================================================================*
* worker_start *
*===========================================================================*/
void worker_start(struct fproc *rfp, void (*func)(void), message *m_ptr,
int use_spare)
{
/* Schedule work to be done by a worker thread. The work is bound to the given
* process. If a function pointer is given, the work is considered normal work,
* and the function will be called to handle it. If the function pointer is
* NULL, the work is considered postponed PM work, and service_pm_postponed
* will be called to handle it. The input message will be a copy of the given
* message. Optionally, the last spare (deadlock-resolving) thread may be used
* to execute the work immediately.
*/
int is_pm_work, is_pending, is_active, has_normal_work, has_pm_work;
assert(rfp != NULL);
is_pm_work = (func == NULL);
is_pending = (rfp->fp_flags & FP_PENDING);
is_active = (rfp->fp_worker != NULL);
has_normal_work = (rfp->fp_func != NULL);
has_pm_work = (rfp->fp_flags & FP_PM_WORK);
/* Sanity checks. If any of these trigger, someone messed up badly! */
if (is_pending || is_active) {
if (is_pending && is_active)
panic("work cannot be both pending and active");
/* The process cannot make more than one call at once. */
if (!is_pm_work && has_normal_work)
panic("process has two calls (%x, %x)",
rfp->fp_msg.m_type, m_ptr->m_type);
/* PM will not send more than one job per process to us at once. */
if (is_pm_work && has_pm_work)
panic("got two calls from PM (%x, %x)",
rfp->fp_pm_msg.m_type, m_ptr->m_type);
/* Despite PM's sys_delay_stop() system, it is possible that normal
* work (in particular, do_pending_pipe) arrives after postponed PM
* work has been scheduled for execution, so we don't check for that.
*/
#if 0
printf("VFS: adding %s work to %s thread\n",
is_pm_work ? "PM" : "normal",
is_pending ? "pending" : "active");
#endif
} else {
/* Some cleanup step forgotten somewhere? */
if (has_normal_work || has_pm_work)
panic("worker administration error");
2011-08-17 15:23:45 +02:00
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Save the work to be performed. */
if (!is_pm_work) {
rfp->fp_msg = *m_ptr;
rfp->fp_func = func;
} else {
rfp->fp_pm_msg = *m_ptr;
rfp->fp_flags |= FP_PM_WORK;
}
/* If we have not only added to existing work, go look for a free thread.
* Note that we won't be using the spare thread for normal work if there is
* already PM work pending, but that situation will never occur in practice.
*/
if (!is_pending && !is_active)
worker_try_activate(rfp, use_spare);
2011-08-17 15:23:45 +02:00
}
/*===========================================================================*
* worker_sleep *
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void worker_sleep(void)
2011-08-17 15:23:45 +02:00
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
struct worker_thread *worker = self;
2011-08-17 15:23:45 +02:00
ASSERTW(worker);
if (mutex_lock(&worker->w_event_mutex) != 0)
panic("unable to lock event mutex");
if (cond_wait(&worker->w_event, &worker->w_event_mutex) != 0)
panic("could not wait on conditional variable");
if (mutex_unlock(&worker->w_event_mutex) != 0)
panic("unable to unlock event mutex");
2011-08-17 15:23:45 +02:00
self = worker;
}
/*===========================================================================*
* worker_wake *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
static void worker_wake(struct worker_thread *worker)
2011-08-17 15:23:45 +02:00
{
/* Signal a worker to wake up */
ASSERTW(worker);
if (mutex_lock(&worker->w_event_mutex) != 0)
panic("unable to lock event mutex");
if (cond_signal(&worker->w_event) != 0)
panic("unable to signal conditional variable");
if (mutex_unlock(&worker->w_event_mutex) != 0)
panic("unable to unlock event mutex");
2011-08-17 15:23:45 +02:00
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/*===========================================================================*
* worker_suspend *
*===========================================================================*/
struct worker_thread *worker_suspend(void)
{
/* Suspend the current thread, saving certain thread variables. Return a
* pointer to the thread's worker structure for later resumption.
*/
ASSERTW(self);
assert(fp != NULL);
assert(self->w_fp == fp);
assert(fp->fp_worker == self);
self->w_err_code = err_code;
return self;
}
/*===========================================================================*
* worker_resume *
*===========================================================================*/
void worker_resume(struct worker_thread *org_self)
{
/* Resume the current thread after suspension, restoring thread variables. */
ASSERTW(org_self);
self = org_self;
fp = self->w_fp;
assert(fp != NULL);
err_code = self->w_err_code;
}
2011-08-17 15:23:45 +02:00
/*===========================================================================*
* worker_wait *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void worker_wait(void)
2011-08-17 15:23:45 +02:00
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Put the current thread to sleep until woken up by the main thread. */
(void) worker_suspend(); /* worker_sleep already saves and restores 'self' */
worker_sleep();
2011-08-17 15:23:45 +02:00
/* We continue here after waking up */
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
worker_resume(self);
assert(self->w_next == NULL);
2011-08-17 15:23:45 +02:00
}
/*===========================================================================*
* worker_signal *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void worker_signal(struct worker_thread *worker)
2011-08-17 15:23:45 +02:00
{
ASSERTW(worker); /* Make sure we have a valid thread */
worker_wake(worker);
}
/*===========================================================================*
* worker_stop *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void worker_stop(struct worker_thread *worker)
{
ASSERTW(worker); /* Make sure we have a valid thread */
VFS: make all IPC asynchronous By decoupling synchronous drivers from VFS, we are a big step closer to supporting driver crashes under all circumstances. That is, VFS can't become stuck on IPC with a synchronous driver (e.g., INET) and can recover from crashing block drivers during open/close/ioctl or during communication with an FS. In order to maintain serialized communication with a synchronous driver, the communication is wrapped by a mutex on a per driver basis (not major numbers as there can be multiple majors with identical endpoints). Majors that share a driver endpoint point to a single mutex object. In order to support crashes from block drivers, the file reopen tactic had to be changed; first reopen files associated with the crashed driver, then send the new driver endpoint to FSes. This solves a deadlock between the FS and the block driver; - VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it after retrying the current request to the newly started driver. - The block driver would refuse the retried request until all files had been reopened. - VFS would reopen files only after getting a reply from the initial REQ_NEW_DRIVER. When a character special driver crashes, all associated files have to be marked invalid and closed (or reopened if flagged as such). However, they can only be closed if a thread holds exclusive access to it. To obtain exclusive access, the worker thread (which handles the new driver endpoint event from DS) schedules a new job to garbage collect invalid files. This way, we can signal the worker thread that was talking to the crashed driver and will release exclusive access to a file associated with the crashed driver and prevent the garbage collecting worker thread from dead locking on that file. Also, when a character special driver crashes, RS will unmap the driver and remap it upon restart. During unmapping, associated files are marked invalid instead of waiting for an endpoint up event from DS, as that event might come later than new read/write/select requests and thus cause confusion in the freshly started driver. When locking a filp, the usage counters are no longer checked. The usage counter can legally go down to zero during filp invalidation while there are locks pending. DS events are handled by a separate worker thread instead of the main thread as reopening files could lead to another crash and a stuck thread. An additional worker thread is then necessary to unlock it. Finally, with everything asynchronous a race condition in do_select surfaced. A select entry was only marked in use after succesfully sending initial select requests to drivers and having to wait. When multiple select() calls were handled there was opportunity that these entries were overwritten. This had as effect that some select results were ignored (and select() remained blocking instead if returning) or do_select tried to access filps that were not present (because thrown away by secondary select()). This bug manifested itself with sendrecs, but was very hard to reproduce. However, it became awfully easy to trigger with asynsends only.
2012-08-28 16:06:51 +02:00
if (worker->w_task != NONE) {
/* This thread is communicating with a driver or file server */
if (worker->w_drv_sendrec != NULL) { /* Driver */
worker->w_drv_sendrec->m_type = EIO;
} else if (worker->w_fs_sendrec != NULL) { /* FS */
worker->w_fs_sendrec->m_type = EIO;
} else {
panic("reply storage consistency error"); /* Oh dear */
}
} else {
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* This shouldn't happen at all... */
printf("VFS: stopping worker not blocked on any task?\n");
util_stacktrace();
VFS: make all IPC asynchronous By decoupling synchronous drivers from VFS, we are a big step closer to supporting driver crashes under all circumstances. That is, VFS can't become stuck on IPC with a synchronous driver (e.g., INET) and can recover from crashing block drivers during open/close/ioctl or during communication with an FS. In order to maintain serialized communication with a synchronous driver, the communication is wrapped by a mutex on a per driver basis (not major numbers as there can be multiple majors with identical endpoints). Majors that share a driver endpoint point to a single mutex object. In order to support crashes from block drivers, the file reopen tactic had to be changed; first reopen files associated with the crashed driver, then send the new driver endpoint to FSes. This solves a deadlock between the FS and the block driver; - VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it after retrying the current request to the newly started driver. - The block driver would refuse the retried request until all files had been reopened. - VFS would reopen files only after getting a reply from the initial REQ_NEW_DRIVER. When a character special driver crashes, all associated files have to be marked invalid and closed (or reopened if flagged as such). However, they can only be closed if a thread holds exclusive access to it. To obtain exclusive access, the worker thread (which handles the new driver endpoint event from DS) schedules a new job to garbage collect invalid files. This way, we can signal the worker thread that was talking to the crashed driver and will release exclusive access to a file associated with the crashed driver and prevent the garbage collecting worker thread from dead locking on that file. Also, when a character special driver crashes, RS will unmap the driver and remap it upon restart. During unmapping, associated files are marked invalid instead of waiting for an endpoint up event from DS, as that event might come later than new read/write/select requests and thus cause confusion in the freshly started driver. When locking a filp, the usage counters are no longer checked. The usage counter can legally go down to zero during filp invalidation while there are locks pending. DS events are handled by a separate worker thread instead of the main thread as reopening files could lead to another crash and a stuck thread. An additional worker thread is then necessary to unlock it. Finally, with everything asynchronous a race condition in do_select surfaced. A select entry was only marked in use after succesfully sending initial select requests to drivers and having to wait. When multiple select() calls were handled there was opportunity that these entries were overwritten. This had as effect that some select results were ignored (and select() remained blocking instead if returning) or do_select tried to access filps that were not present (because thrown away by secondary select()). This bug manifested itself with sendrecs, but was very hard to reproduce. However, it became awfully easy to trigger with asynsends only.
2012-08-28 16:06:51 +02:00
}
worker_wake(worker);
}
2011-09-15 17:39:13 +02:00
/*===========================================================================*
* worker_stop_by_endpt *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void worker_stop_by_endpt(endpoint_t proc_e)
2011-09-15 17:39:13 +02:00
{
struct worker_thread *worker;
int i;
if (proc_e == NONE) return;
for (i = 0; i < NR_WTHREADS; i++) {
worker = &workers[i];
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
if (worker->w_fp != NULL && worker->w_task == proc_e)
2011-09-15 17:39:13 +02:00
worker_stop(worker);
}
}
2011-08-17 15:23:45 +02:00
/*===========================================================================*
* worker_get *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
struct worker_thread *worker_get(thread_t worker_tid)
2011-08-17 15:23:45 +02:00
{
int i;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
for (i = 0; i < NR_WTHREADS; i++)
if (workers[i].w_tid == worker_tid)
return(&workers[i]);
2011-08-17 15:23:45 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
return(NULL);
2011-08-17 15:23:45 +02:00
}
/*===========================================================================*
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
* worker_set_proc *
2011-08-17 15:23:45 +02:00
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
void worker_set_proc(struct fproc *rfp)
2011-08-17 15:23:45 +02:00
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Perform an incredibly ugly action that completely violates the threading
* model: change the current working thread's process context to another
* process. The caller is expected to hold the lock to both the calling and the
* target process, and neither process is expected to continue regular
* operation when done. This code is here *only* and *strictly* for the reboot
* code, and *must not* be used for anything else.
*/
2011-08-17 15:23:45 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
if (fp == rfp) return;
2011-08-17 15:23:45 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
if (rfp->fp_worker != NULL)
panic("worker_set_proc: target process not idle");
2011-09-15 17:39:13 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
fp->fp_worker = NULL;
2011-09-15 17:39:13 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
fp = rfp;
2011-09-15 17:39:13 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
self->w_fp = rfp;
fp->fp_worker = self;
2011-09-15 17:39:13 +02:00
}