minix/drivers/dp8390/dp8390.c

/*
 * dp8390.c
 *
 * This file contains a ethernet device driver for NS dp8390 based ethernet
 * cards.
 *
 * The valid messages and their parameters are:
 *
 *   m_type	  DL_PORT    DL_PROC   DL_COUNT   DL_MODE   DL_ADDR
 * |------------+----------+---------+----------+---------+---------|
 * | HARDINT	|          |         |          |         |         |
 * |------------|----------|---------|----------|---------|---------|
 * | DL_WRITE	| port nr  | proc nr | count    | mode    | address |
 * |------------|----------|---------|----------|---------|---------|
 * | DL_WRITEV	| port nr  | proc nr | count    | mode    | address |
 * |------------|----------|---------|----------|---------|---------|
 * | DL_READ	| port nr  | proc nr | count    |         | address |
 * |------------|----------|---------|----------|---------|---------|
 * | DL_READV	| port nr  | proc nr | count    |         | address |
 * |------------|----------|---------|----------|---------|---------|
 * | DL_INIT	| port nr  | proc nr | mode     |         | address |
 * |------------|----------|---------|----------|---------|---------|
 * | DL_GETSTAT	| port nr  | proc nr |          |         | address |
 * |------------|----------|---------|----------|---------|---------|
 * | DL_STOP	| port_nr  |         |          |         |	    |
 * |------------|----------|---------|----------|---------|---------|
 *
 * The messages sent are:
 *
 *   m-type	   DL_PORT    DL_PROC   DL_COUNT   DL_STAT   DL_CLCK
 * |-------------+----------+---------+----------+---------+---------|
 * |DL_TASK_REPLY| port nr  | proc nr | rd-count | err|stat| clock   |
 * |-------------+----------+---------+----------+---------+---------|
 *
 *   m_type	   m3_i1     m3_i2       m3_ca1
 * |-------------+---------+-----------+---------------|
 * |DL_INIT_REPLY| port nr | last port | ethernet addr |
 * |-------------+---------+-----------+---------------|
 *
 * Created:	before Dec 28, 1992 by Philip Homburg <philip@f-mnx.phicoh.com>
 *
 * Modified Mar 10 1994 by Philip Homburg
 *	Become a generic dp8390 driver.
 *
 * Modified Dec 20 1996 by G. Falzoni <falzoni@marina.scn.de>
 *	Added support for 3c503 boards.
 */

#include "../drivers.h"

#include <stdlib.h>
#include <minix/com.h>
#include <net/hton.h>
#include <net/gen/ether.h>
#include <net/gen/eth_io.h>
#include "assert.h"

#include "local.h"
#include "dp8390.h"

#define DE_PORT_NR	3

static dpeth_t de_table[DE_PORT_NR];
static u16_t eth_ign_proto;
static char *progname;

/* Configuration */
typedef struct dp_conf
{
	port_t dpc_port;
	int dpc_irq;
	phys_bytes dpc_mem;
	char *dpc_envvar;
} dp_conf_t;

dp_conf_t dp_conf[]=	/* Card addresses */
{
	/* I/O port, IRQ,  Buffer address,  Env. var. */
	{  0x280,     3,    0xD0000,        "DPETH0"	},
	{  0x300,     5,    0xC8000,        "DPETH1"	},
	{  0x380,    10,    0xD8000,        "DPETH2"	},
};

/* Test if dp_conf has exactly DE_PORT_NR entries.  If not then you will see
 * the error: "array size is negative".
 */
extern int ___dummy[DE_PORT_NR == sizeof(dp_conf)/sizeof(dp_conf[0]) ? 1 : -1];

/* Card inits configured out? */
#if !ENABLE_WDETH
#define wdeth_probe(dep)	(0)
#endif
#if !ENABLE_NE2000
#define ne_probe(dep)		(0)
#endif
#if !ENABLE_3C503
#define el2_probe(dep)		(0)
#endif

/* Some clones of the dp8390 and the PC emulator 'Bochs' require the CR_STA
 * on writes to the CR register. Additional CR_STAs do not appear to hurt
 * genuine dp8390s
 */
#define CR_EXTRA	CR_STA

#if ENABLE_PCI
_PROTOTYPE( static void pci_conf, (void)				);
#endif
_PROTOTYPE( static void do_vwrite, (message *mp, int from_int,
							int vectored)	);
_PROTOTYPE( static void do_vread, (message *mp, int vectored)		);
_PROTOTYPE( static void do_init, (message *mp)				);
_PROTOTYPE( static void do_int, (dpeth_t *dep)				);
_PROTOTYPE( static void do_getstat, (message *mp)			);
_PROTOTYPE( static void do_getname, (message *mp)			);
_PROTOTYPE( static void do_stop, (message *mp)				);
_PROTOTYPE( static void dp_init, (dpeth_t *dep)				);
_PROTOTYPE( static void dp_confaddr, (dpeth_t *dep)			);
_PROTOTYPE( static void dp_reinit, (dpeth_t *dep)			);
_PROTOTYPE( static void dp_reset, (dpeth_t *dep)			);
_PROTOTYPE( static void dp_check_ints, (dpeth_t *dep)			);
_PROTOTYPE( static void dp_recv, (dpeth_t *dep)				);
_PROTOTYPE( static void dp_send, (dpeth_t *dep)				);
_PROTOTYPE( static void dp8390_stop, (void)				);
_PROTOTYPE( static void dp_getblock, (dpeth_t *dep, int page,
				size_t offset, size_t size, void *dst)	);
_PROTOTYPE( static void dp_pio8_getblock, (dpeth_t *dep, int page,
				size_t offset, size_t size, void *dst)	);
_PROTOTYPE( static void dp_pio16_getblock, (dpeth_t *dep, int page,
				size_t offset, size_t size, void *dst)	);
_PROTOTYPE( static int dp_pkt2user, (dpeth_t *dep, int page,
							int length)	);
_PROTOTYPE( static void dp_user2nic, (dpeth_t *dep, iovec_dat_t *iovp, 
		vir_bytes offset, int nic_addr, vir_bytes count)	);
_PROTOTYPE( static void dp_pio8_user2nic, (dpeth_t *dep,
				iovec_dat_t *iovp, vir_bytes offset,
				int nic_addr, vir_bytes count)		);
_PROTOTYPE( static void dp_pio16_user2nic, (dpeth_t *dep,
				iovec_dat_t *iovp, vir_bytes offset,
				int nic_addr, vir_bytes count)		);
_PROTOTYPE( static void dp_nic2user, (dpeth_t *dep, int nic_addr, 
		iovec_dat_t *iovp, vir_bytes offset, vir_bytes count)	);
_PROTOTYPE( static void dp_pio8_nic2user, (dpeth_t *dep, int nic_addr, 
		iovec_dat_t *iovp, vir_bytes offset, vir_bytes count)	);
_PROTOTYPE( static void dp_pio16_nic2user, (dpeth_t *dep, int nic_addr, 
		iovec_dat_t *iovp, vir_bytes offset, vir_bytes count)	);
_PROTOTYPE( static void dp_next_iovec, (iovec_dat_t *iovp)		);
_PROTOTYPE( static void conf_hw, (dpeth_t *dep)				);
_PROTOTYPE( static void update_conf, (dpeth_t *dep, dp_conf_t *dcp)	);
_PROTOTYPE( static int calc_iovec_size, (iovec_dat_t *iovp)		);
_PROTOTYPE( static void reply, (dpeth_t *dep, int err, int may_block)	);
_PROTOTYPE( static void mess_reply, (message *req, message *reply)	);
_PROTOTYPE( static void get_userdata, (int user_proc,
		vir_bytes user_addr, vir_bytes count, void *loc_addr)	);
_PROTOTYPE( static void put_userdata, (int user_proc,
		vir_bytes user_addr, vir_bytes count, void *loc_addr)	);
_PROTOTYPE( static void insb, (port_t port, void *buf, size_t size)				);
_PROTOTYPE( static void insw, (port_t port, void *buf, size_t size)				);
_PROTOTYPE( static void do_vir_insb, (port_t port, int proc,
					vir_bytes buf, size_t size)	);
_PROTOTYPE( static void do_vir_insw, (port_t port, int proc,
					vir_bytes buf, size_t size)	);
_PROTOTYPE( static void do_vir_outsb, (port_t port, int proc,
					vir_bytes buf, size_t size)	);
_PROTOTYPE( static void do_vir_outsw, (port_t port, int proc,
					vir_bytes buf, size_t size)	);

/*===========================================================================*
 *				dpeth_task				     *
 *===========================================================================*/
int main(int argc, char *argv[])
{
	message m;
	int i, irq, r, tasknr;
	dpeth_t *dep;
	long v;

	if (argc < 1)
	{
		panic("DP8390",
			"A head which at this time has no name", NO_NUM);
	}
	(progname=strrchr(argv[0],'/')) ? progname++ : (progname=argv[0]);

	env_setargs(argc, argv);

	for (i= 0, dep= de_table; i<DE_PORT_NR; i++, dep++)
	{
		strcpy(dep->de_name, "dp8390#0");
		dep->de_name[7] += i;
	}

	v= 0;
	(void) env_parse("ETH_IGN_PROTO", "x", 0, &v, 0x0000L, 0xFFFFL);
	eth_ign_proto= htons((u16_t) v);

	/* Try to notify inet that we are present (again) */
	r = findproc("inet", &tasknr);
	if (r == OK)
		notify(tasknr);

	while (TRUE)
	{
		if ((r= receive(ANY, &m)) != OK)
			panic("", "dp8390: receive failed", r);

		switch (m.m_type)
		{
		case DEV_PING:  notify(m.m_source);		continue;
		case DL_WRITE:	do_vwrite(&m, FALSE, FALSE);	break;
		case DL_WRITEV:	do_vwrite(&m, FALSE, TRUE);	break;
		case DL_READ:	do_vread(&m, FALSE);		break;
		case DL_READV:	do_vread(&m, TRUE);		break;
		case DL_INIT:	do_init(&m);			break;
		case DL_GETSTAT: do_getstat(&m);		break;
		case DL_GETNAME: do_getname(&m); 		break;
		case DL_STOP:	do_stop(&m);			break;
		case HARD_INT:
			for (i= 0, dep= &de_table[0]; i<DE_PORT_NR; i++, dep++)
			{
				if (dep->de_mode != DEM_ENABLED)
					continue;
				assert(dep->de_flags & DEF_ENABLED);
				irq= dep->de_irq;
				assert(irq >= 0 && irq < NR_IRQ_VECTORS);
				if (dep->de_int_pending || 1)
				{
					dep->de_int_pending= 0;
					dp_check_ints(dep);
					do_int(dep);
					r= sys_irqenable(&dep->de_hook);
					if (r != OK)
					{
						panic("DP8390", 
						"unable enable interrupts", r);
					}
				}
			}
			break;
		case SYS_SIG:	{
			sigset_t sigset = m.NOTIFY_ARG;
			if (sigismember(&sigset, SIGKSTOP)) dp8390_stop();
			break;
		}
		case SYN_ALARM:
			printf("dp8390: strange, got SYN_ALARM\n");
			break;
		case PROC_EVENT:
			break;
		default:
			panic("", "dp8390: illegal message", m.m_type);
		}
	}
}

#if 0
/*===========================================================================*
 *				dp8390_dump				     *
 *===========================================================================*/
void dp8390_dump()
{
	dpeth_t *dep;
	int i, isr;

	printf("\n");
	for (i= 0, dep = &de_table[0]; i<DE_PORT_NR; i++, dep++)
	{
#if XXX
		if (dep->de_mode == DEM_DISABLED)
			printf("dp8390 port %d is disabled\n", i);
		else if (dep->de_mode == DEM_SINK)
			printf("dp8390 port %d is in sink mode\n", i);
#endif

		if (dep->de_mode != DEM_ENABLED)
			continue;

		printf("dp8390 statistics of port %d:\n", i);

		printf("recvErr    :%8ld\t", dep->de_stat.ets_recvErr);
		printf("sendErr    :%8ld\t", dep->de_stat.ets_sendErr);
		printf("OVW        :%8ld\n", dep->de_stat.ets_OVW);

		printf("CRCerr     :%8ld\t", dep->de_stat.ets_CRCerr);
		printf("frameAll   :%8ld\t", dep->de_stat.ets_frameAll);
		printf("missedP    :%8ld\n", dep->de_stat.ets_missedP);

		printf("packetR    :%8ld\t", dep->de_stat.ets_packetR);
		printf("packetT    :%8ld\t", dep->de_stat.ets_packetT);
		printf("transDef   :%8ld\n", dep->de_stat.ets_transDef);

		printf("collision  :%8ld\t", dep->de_stat.ets_collision);
		printf("transAb    :%8ld\t", dep->de_stat.ets_transAb);
		printf("carrSense  :%8ld\n", dep->de_stat.ets_carrSense);

		printf("fifoUnder  :%8ld\t", dep->de_stat.ets_fifoUnder);
		printf("fifoOver   :%8ld\t", dep->de_stat.ets_fifoOver);
		printf("CDheartbeat:%8ld\n", dep->de_stat.ets_CDheartbeat);

		printf("OWC        :%8ld\t", dep->de_stat.ets_OWC);

		isr= inb_reg0(dep, DP_ISR);
		printf("dp_isr = 0x%x + 0x%x, de_flags = 0x%x\n", isr,
					inb_reg0(dep, DP_ISR), dep->de_flags);
	}
}
#endif

/*===========================================================================*
 *				dp8390_stop				     *
 *===========================================================================*/
static void dp8390_stop()
{
	message mess;
	int i;

	for (i= 0; i<DE_PORT_NR; i++)
	{
		if (de_table[i].de_mode != DEM_ENABLED)
			continue;
		mess.m_type= DL_STOP;
		mess.DL_PORT= i;
		do_stop(&mess);
	}
}

#if ENABLE_PCI
/*===========================================================================*
 *				pci_conf				     *
 *===========================================================================*/
static void pci_conf()
{
	int i, h;
	char *envvar;
	struct dpeth *dep;
	static char envfmt[] = "*:d.d.d";
	long v;
	static int first_time= 1;

	if (!first_time)
		return;
	first_time= 0;

	for (i= 0, dep= de_table; i<DE_PORT_NR; i++, dep++)
	{
		envvar= dp_conf[i].dpc_envvar;
		if (!(dep->de_pci= env_prefix(envvar, "pci")))
			continue;	/* no PCI config */
		v= 0;
		(void) env_parse(envvar, envfmt, 1, &v, 0, 255);
		dep->de_pcibus= v;
		v= 0;
		(void) env_parse(envvar, envfmt, 2, &v, 0, 255);
		dep->de_pcidev= v;
		v= 0;
		(void) env_parse(envvar, envfmt, 3, &v, 0, 255);
		dep->de_pcifunc= v;
	}

	for (h= 1; h >= 0; h--) {
		for (i= 0, dep= de_table; i<DE_PORT_NR; i++, dep++)
		{
			if (!dep->de_pci)
				continue;
			if (((dep->de_pcibus | dep->de_pcidev |
				dep->de_pcifunc) != 0) != h)
			{
				continue;
			}
			if (!rtl_probe(dep))
				dep->de_pci= -1;
		}
	}
}
#endif /* ENABLE_PCI */

/*===========================================================================*
 *				do_vwrite				     *
 *===========================================================================*/
static void do_vwrite(mp, from_int, vectored)
message *mp;
int from_int;
int vectored;
{
	int port, count, size;
	int sendq_head;
	dpeth_t *dep;

	port = mp->DL_PORT;
	count = mp->DL_COUNT;
	if (port < 0 || port >= DE_PORT_NR)
		panic("", "dp8390: illegal port", port);
	dep= &de_table[port];
	dep->de_client= mp->DL_PROC;

	if (dep->de_mode == DEM_SINK)
	{
		assert(!from_int);
		dep->de_flags |= DEF_PACK_SEND;
		reply(dep, OK, FALSE);
		return;
	}
	assert(dep->de_mode == DEM_ENABLED);
	assert(dep->de_flags & DEF_ENABLED);
	if (dep->de_flags & DEF_SEND_AVAIL)
		panic("", "dp8390: send already in progress", NO_NUM);

	sendq_head= dep->de_sendq_head;
	if (dep->de_sendq[sendq_head].sq_filled)
	{
		if (from_int)
			panic("", "dp8390: should not be sending\n", NO_NUM);
		dep->de_sendmsg= *mp;
		dep->de_flags |= DEF_SEND_AVAIL;
		reply(dep, OK, FALSE);
		return;
	}
	assert(!(dep->de_flags & DEF_PACK_SEND));

	if (vectored)
	{
		get_userdata(mp->DL_PROC, (vir_bytes) mp->DL_ADDR,
			(count > IOVEC_NR ? IOVEC_NR : count) *
			sizeof(iovec_t), dep->de_write_iovec.iod_iovec);
		dep->de_write_iovec.iod_iovec_s = count;
		dep->de_write_iovec.iod_proc_nr = mp->DL_PROC;
		dep->de_write_iovec.iod_iovec_addr = (vir_bytes) mp->DL_ADDR;

		dep->de_tmp_iovec = dep->de_write_iovec;
		size = calc_iovec_size(&dep->de_tmp_iovec);
	}
	else
	{  
		dep->de_write_iovec.iod_iovec[0].iov_addr =
			(vir_bytes) mp->DL_ADDR;
		dep->de_write_iovec.iod_iovec[0].iov_size =
			mp->DL_COUNT;
		dep->de_write_iovec.iod_iovec_s = 1;
		dep->de_write_iovec.iod_proc_nr = mp->DL_PROC;
		dep->de_write_iovec.iod_iovec_addr = 0;
		size= mp->DL_COUNT;
	}
	if (size < ETH_MIN_PACK_SIZE || size > ETH_MAX_PACK_SIZE_TAGGED)
	{
		panic("", "dp8390: invalid packet size", size);
	}
	(dep->de_user2nicf)(dep, &dep->de_write_iovec, 0,
		dep->de_sendq[sendq_head].sq_sendpage * DP_PAGESIZE,
		size);
	dep->de_sendq[sendq_head].sq_filled= TRUE;
	if (dep->de_sendq_tail == sendq_head)
	{
		outb_reg0(dep, DP_TPSR, dep->de_sendq[sendq_head].sq_sendpage);
		outb_reg0(dep, DP_TBCR1, size >> 8);
		outb_reg0(dep, DP_TBCR0, size & 0xff);
		outb_reg0(dep, DP_CR, CR_TXP | CR_EXTRA);/* there it goes.. */
	}
	else
		dep->de_sendq[sendq_head].sq_size= size;
	
	if (++sendq_head == dep->de_sendq_nr)
		sendq_head= 0;
	assert(sendq_head < SENDQ_NR);
	dep->de_sendq_head= sendq_head;

	dep->de_flags |= DEF_PACK_SEND;

	/* If the interrupt handler called, don't send a reply. The reply
	 * will be sent after all interrupts are handled. 
	 */
	if (from_int)
		return;
	reply(dep, OK, FALSE);

	assert(dep->de_mode == DEM_ENABLED);
	assert(dep->de_flags & DEF_ENABLED);
}

/*===========================================================================*
 *				do_vread				     *
 *===========================================================================*/
static void do_vread(mp, vectored)
message *mp;
int vectored;
{
	int port, count;
	int size;
	dpeth_t *dep;

	port = mp->DL_PORT;
	count = mp->DL_COUNT;
	if (port < 0 || port >= DE_PORT_NR)
		panic("", "dp8390: illegal port", port);
	dep= &de_table[port];
	dep->de_client= mp->DL_PROC;
	if (dep->de_mode == DEM_SINK)
	{
		reply(dep, OK, FALSE);
		return;
	}
	assert(dep->de_mode == DEM_ENABLED);
	assert(dep->de_flags & DEF_ENABLED);

	if(dep->de_flags & DEF_READING)
		panic("", "dp8390: read already in progress", NO_NUM);

	if (vectored)
	{
		get_userdata(mp->DL_PROC, (vir_bytes) mp->DL_ADDR,
			(count > IOVEC_NR ? IOVEC_NR : count) *
			sizeof(iovec_t), dep->de_read_iovec.iod_iovec);
		dep->de_read_iovec.iod_iovec_s = count;
		dep->de_read_iovec.iod_proc_nr = mp->DL_PROC;
		dep->de_read_iovec.iod_iovec_addr = (vir_bytes) mp->DL_ADDR;

		dep->de_tmp_iovec = dep->de_read_iovec;
		size= calc_iovec_size(&dep->de_tmp_iovec);
	}
	else
	{
		dep->de_read_iovec.iod_iovec[0].iov_addr =
			(vir_bytes) mp->DL_ADDR;
		dep->de_read_iovec.iod_iovec[0].iov_size =
			mp->DL_COUNT;
		dep->de_read_iovec.iod_iovec_s = 1;
		dep->de_read_iovec.iod_proc_nr = mp->DL_PROC;
		dep->de_read_iovec.iod_iovec_addr = 0;
		size= count;
	}
	if (size < ETH_MAX_PACK_SIZE_TAGGED)
		panic("", "dp8390: wrong packet size", size);
	dep->de_flags |= DEF_READING;

	dp_recv(dep);

	if ((dep->de_flags & (DEF_READING|DEF_STOPPED)) ==
		(DEF_READING|DEF_STOPPED))
	{
		/* The chip is stopped, and all arrived packets are 
		 * delivered.
		 */
		dp_reset(dep);
	}
	reply(dep, OK, FALSE);
}

/*===========================================================================*
 *				do_init					     *
 *===========================================================================*/
static void do_init(mp)
message *mp;
{
	int port;
	dpeth_t *dep;
	message reply_mess;

#if ENABLE_PCI
	pci_conf(); /* Configure PCI devices. */
#endif

	port = mp->DL_PORT;
	if (port < 0 || port >= DE_PORT_NR)
	{
		reply_mess.m_type= DL_INIT_REPLY;
		reply_mess.m3_i1= ENXIO;
		mess_reply(mp, &reply_mess);
		return;
	}
	dep= &de_table[port];
	if (dep->de_mode == DEM_DISABLED)
	{
		/* This is the default, try to (re)locate the device. */
		conf_hw(dep);
		if (dep->de_mode == DEM_DISABLED)
		{
			/* Probe failed, or the device is configured off. */
			reply_mess.m_type= DL_INIT_REPLY;
			reply_mess.m3_i1= ENXIO;
			mess_reply(mp, &reply_mess);
			return;
		}
		if (dep->de_mode == DEM_ENABLED)
			dp_init(dep);
	}

	if (dep->de_mode == DEM_SINK)
	{
		strncpy((char *) dep->de_address.ea_addr, "ZDP", 6);
		dep->de_address.ea_addr[5] = port;
		dp_confaddr(dep);
		reply_mess.m_type = DL_INIT_REPLY;
		reply_mess.m3_i1 = mp->DL_PORT;
		reply_mess.m3_i2 = DE_PORT_NR;
		*(ether_addr_t *) reply_mess.m3_ca1 = dep->de_address;
		mess_reply(mp, &reply_mess);
		return;
	}
	assert(dep->de_mode == DEM_ENABLED);
	assert(dep->de_flags & DEF_ENABLED);

	dep->de_flags &= ~(DEF_PROMISC | DEF_MULTI | DEF_BROAD);

	if (mp->DL_MODE & DL_PROMISC_REQ)
		dep->de_flags |= DEF_PROMISC | DEF_MULTI | DEF_BROAD;
	if (mp->DL_MODE & DL_MULTI_REQ)
		dep->de_flags |= DEF_MULTI;
	if (mp->DL_MODE & DL_BROAD_REQ)
		dep->de_flags |= DEF_BROAD;

	dep->de_client = mp->m_source;
	dp_reinit(dep);

	reply_mess.m_type = DL_INIT_REPLY;
	reply_mess.m3_i1 = mp->DL_PORT;
	reply_mess.m3_i2 = DE_PORT_NR;
	*(ether_addr_t *) reply_mess.m3_ca1 = dep->de_address;

	mess_reply(mp, &reply_mess);
}

/*===========================================================================*
 *				do_int					     *
 *===========================================================================*/
static void do_int(dep)
dpeth_t *dep;
{
	if (dep->de_flags & (DEF_PACK_SEND | DEF_PACK_RECV))
		reply(dep, OK, TRUE);
}

/*===========================================================================*
 *				do_getstat				     *
 *===========================================================================*/
static void do_getstat(mp)
message *mp;
{
	int port;
	dpeth_t *dep;

	port = mp->DL_PORT;
	if (port < 0 || port >= DE_PORT_NR)
		panic("", "dp8390: illegal port", port);
	dep= &de_table[port];
	dep->de_client= mp->DL_PROC;
	if (dep->de_mode == DEM_SINK)
	{
		put_userdata(mp->DL_PROC, (vir_bytes) mp->DL_ADDR,
			(vir_bytes) sizeof(dep->de_stat), &dep->de_stat);
		reply(dep, OK, FALSE);
		return;
	}
	assert(dep->de_mode == DEM_ENABLED);
	assert(dep->de_flags & DEF_ENABLED);

	dep->de_stat.ets_CRCerr += inb_reg0(dep, DP_CNTR0);
	dep->de_stat.ets_frameAll += inb_reg0(dep, DP_CNTR1);
	dep->de_stat.ets_missedP += inb_reg0(dep, DP_CNTR2);

	put_userdata(mp->DL_PROC, (vir_bytes) mp->DL_ADDR,
		(vir_bytes) sizeof(dep->de_stat), &dep->de_stat);
	reply(dep, OK, FALSE);
}

/*===========================================================================*
 *				do_getname				     *
 *===========================================================================*/
static void do_getname(mp)
message *mp;
{
	int r;

	strncpy(mp->DL_NAME, progname, sizeof(mp->DL_NAME));
	mp->DL_NAME[sizeof(mp->DL_NAME)-1]= '\0';
	mp->m_type= DL_NAME_REPLY;
	r= send(mp->m_source, mp);
	if (r != OK)
		panic("dp8390", "do_getname: send failed: %d\n", r);
}

/*===========================================================================*
 *				do_stop					     *
 *===========================================================================*/
static void do_stop(mp)
message *mp;
{
	int port;
	dpeth_t *dep;

	port = mp->DL_PORT;

	if (port < 0 || port >= DE_PORT_NR)
		panic("", "dp8390: illegal port", port);
	dep= &de_table[port];
	if (dep->de_mode == DEM_SINK)
		return;
	assert(dep->de_mode == DEM_ENABLED);

	if (!(dep->de_flags & DEF_ENABLED))
		return;

	outb_reg0(dep, DP_CR, CR_STP | CR_DM_ABORT);
	(dep->de_stopf)(dep);

	dep->de_flags= DEF_EMPTY;
}

/*===========================================================================*
 *				dp_init					     *
 *===========================================================================*/
static void dp_init(dep)
dpeth_t *dep;
{
	int dp_rcr_reg;
	int i, r;

	/* General initialization */
	dep->de_flags = DEF_EMPTY;
	(*dep->de_initf)(dep);

	dp_confaddr(dep);

	if (debug)
	{
		printf("%s: Ethernet address ", dep->de_name);
		for (i= 0; i < 6; i++)
			printf("%x%c", dep->de_address.ea_addr[i],
							i < 5 ? ':' : '\n');
	}

	/* Initialization of the dp8390 following the mandatory procedure
	 * in reference manual ("DP8390D/NS32490D NIC Network Interface
	 * Controller", National Semiconductor, July 1995, Page 29).
	 */
	/* Step 1: */
	outb_reg0(dep, DP_CR, CR_PS_P0 | CR_STP | CR_DM_ABORT);
	/* Step 2: */
	if (dep->de_16bit)
		outb_reg0(dep, DP_DCR, DCR_WORDWIDE | DCR_8BYTES | DCR_BMS);
	else
		outb_reg0(dep, DP_DCR, DCR_BYTEWIDE | DCR_8BYTES | DCR_BMS);
	/* Step 3: */
	outb_reg0(dep, DP_RBCR0, 0);
	outb_reg0(dep, DP_RBCR1, 0);
	/* Step 4: */
	dp_rcr_reg = 0;
	if (dep->de_flags & DEF_PROMISC)
		dp_rcr_reg |= RCR_AB | RCR_PRO | RCR_AM;
	if (dep->de_flags & DEF_BROAD)
		dp_rcr_reg |= RCR_AB;
	if (dep->de_flags & DEF_MULTI)
		dp_rcr_reg |= RCR_AM;
	outb_reg0(dep, DP_RCR, dp_rcr_reg);
	/* Step 5: */
	outb_reg0(dep, DP_TCR, TCR_INTERNAL);
	/* Step 6: */
	outb_reg0(dep, DP_BNRY, dep->de_startpage);
	outb_reg0(dep, DP_PSTART, dep->de_startpage);
	outb_reg0(dep, DP_PSTOP, dep->de_stoppage);
	/* Step 7: */
	outb_reg0(dep, DP_ISR, 0xFF);
	/* Step 8: */
	outb_reg0(dep, DP_IMR, IMR_PRXE | IMR_PTXE | IMR_RXEE | IMR_TXEE |
		IMR_OVWE | IMR_CNTE);
	/* Step 9: */
	outb_reg0(dep, DP_CR, CR_PS_P1 | CR_DM_ABORT | CR_STP);

	outb_reg1(dep, DP_PAR0, dep->de_address.ea_addr[0]);
	outb_reg1(dep, DP_PAR1, dep->de_address.ea_addr[1]);
	outb_reg1(dep, DP_PAR2, dep->de_address.ea_addr[2]);
	outb_reg1(dep, DP_PAR3, dep->de_address.ea_addr[3]);
	outb_reg1(dep, DP_PAR4, dep->de_address.ea_addr[4]);
	outb_reg1(dep, DP_PAR5, dep->de_address.ea_addr[5]);

	outb_reg1(dep, DP_MAR0, 0xff);
	outb_reg1(dep, DP_MAR1, 0xff);
	outb_reg1(dep, DP_MAR2, 0xff);
	outb_reg1(dep, DP_MAR3, 0xff);
	outb_reg1(dep, DP_MAR4, 0xff);
	outb_reg1(dep, DP_MAR5, 0xff);
	outb_reg1(dep, DP_MAR6, 0xff);
	outb_reg1(dep, DP_MAR7, 0xff);

	outb_reg1(dep, DP_CURR, dep->de_startpage + 1);
	/* Step 10: */
	outb_reg0(dep, DP_CR, CR_DM_ABORT | CR_STA);
	/* Step 11: */
	outb_reg0(dep, DP_TCR, TCR_NORMAL);

	inb_reg0(dep, DP_CNTR0);		/* reset counters by reading */
	inb_reg0(dep, DP_CNTR1);
	inb_reg0(dep, DP_CNTR2);

	/* Finish the initialization. */
	dep->de_flags |= DEF_ENABLED;
	for (i= 0; i<dep->de_sendq_nr; i++)
		dep->de_sendq[i].sq_filled= 0;
	dep->de_sendq_head= 0;
	dep->de_sendq_tail= 0;
	if (!dep->de_prog_IO)
	{
		dep->de_user2nicf= dp_user2nic;
		dep->de_nic2userf= dp_nic2user;
		dep->de_getblockf= dp_getblock;
	}
	else if (dep->de_16bit)
	{
		dep->de_user2nicf= dp_pio16_user2nic;
		dep->de_nic2userf= dp_pio16_nic2user;
		dep->de_getblockf= dp_pio16_getblock;
	}
	else
	{
		dep->de_user2nicf= dp_pio8_user2nic;
		dep->de_nic2userf= dp_pio8_nic2user;
		dep->de_getblockf= dp_pio8_getblock;
	}

	/* Set the interrupt handler and policy. Do not automatically 
	 * reenable interrupts. Return the IRQ line number on interrupts.
 	 */
 	dep->de_hook = dep->de_irq;
	r= sys_irqsetpolicy(dep->de_irq, 0, &dep->de_hook);
	if (r != OK)
		panic("DP8390", "sys_irqsetpolicy failed", r);

	r= sys_irqenable(&dep->de_hook);
	if (r != OK)
	{
		panic("DP8390", "unable enable interrupts", r);
	}
}

/*===========================================================================*
 *				dp_confaddr				     *
 *===========================================================================*/
static void dp_confaddr(dep)
dpeth_t *dep;
{
	int i;
	char eakey[16];
	static char eafmt[]= "x:x:x:x:x:x";
	long v;

	/* User defined ethernet address? */
	strcpy(eakey, dp_conf[dep-de_table].dpc_envvar);
	strcat(eakey, "_EA");

	for (i= 0; i < 6; i++)
	{
		v= dep->de_address.ea_addr[i];
		if (env_parse(eakey, eafmt, i, &v, 0x00L, 0xFFL) != EP_SET)
		{
			break;
		}
		dep->de_address.ea_addr[i]= v;
	}

	if (i != 0 && i != 6) env_panic(eakey);	/* It's all or nothing */
}

/*===========================================================================*
 *				dp_reinit				     *
 *===========================================================================*/
static void dp_reinit(dep)
dpeth_t *dep;
{
	int dp_rcr_reg;

	outb_reg0(dep, DP_CR, CR_PS_P0 | CR_EXTRA);

	dp_rcr_reg = 0;
	if (dep->de_flags & DEF_PROMISC)
		dp_rcr_reg |= RCR_AB | RCR_PRO | RCR_AM;
	if (dep->de_flags & DEF_BROAD)
		dp_rcr_reg |= RCR_AB;
	if (dep->de_flags & DEF_MULTI)
		dp_rcr_reg |= RCR_AM;
	outb_reg0(dep, DP_RCR, dp_rcr_reg);
}

/*===========================================================================*
 *				dp_reset				     *
 *===========================================================================*/
static void dp_reset(dep)
dpeth_t *dep;
{
	int i;

	/* Stop chip */
	outb_reg0(dep, DP_CR, CR_STP | CR_DM_ABORT);
	outb_reg0(dep, DP_RBCR0, 0);
	outb_reg0(dep, DP_RBCR1, 0);
	for (i= 0; i < 0x1000 && ((inb_reg0(dep, DP_ISR) & ISR_RST) == 0); i++)
		; /* Do nothing */
	outb_reg0(dep, DP_TCR, TCR_1EXTERNAL|TCR_OFST);
	outb_reg0(dep, DP_CR, CR_STA|CR_DM_ABORT);
	outb_reg0(dep, DP_TCR, TCR_NORMAL);

	/* Acknowledge the ISR_RDC (remote dma) interrupt. */
	for (i= 0; i < 0x1000 && ((inb_reg0(dep, DP_ISR) & ISR_RDC) == 0); i++)
		; /* Do nothing */
	outb_reg0(dep, DP_ISR, inb_reg0(dep, DP_ISR) & ~ISR_RDC);

	/* Reset the transmit ring. If we were transmitting a packet, we
	 * pretend that the packet is processed. Higher layers will
	 * retransmit if the packet wasn't actually sent.
	 */
	dep->de_sendq_head= dep->de_sendq_tail= 0;
	for (i= 0; i<dep->de_sendq_nr; i++)
		dep->de_sendq[i].sq_filled= 0;
	dp_send(dep);
	dep->de_flags &= ~DEF_STOPPED;
}

/*===========================================================================*
 *				dp_check_ints				     *
 *===========================================================================*/
static void dp_check_ints(dep)
dpeth_t *dep;
{
	int isr, tsr;
	int size, sendq_tail;

	if (!(dep->de_flags & DEF_ENABLED))
		panic("", "dp8390: got premature interrupt", NO_NUM);

	for(;;)
	{
		isr = inb_reg0(dep, DP_ISR);
		if (!isr)
			break;
		outb_reg0(dep, DP_ISR, isr);
		if (isr & (ISR_PTX|ISR_TXE))
		{
			if (isr & ISR_TXE)
			{
#if DEBUG
 { printf("%s: got send Error\n", dep->de_name); }
#endif
				dep->de_stat.ets_sendErr++;
			}
			else
			{
				tsr = inb_reg0(dep, DP_TSR);

				if (tsr & TSR_PTX) dep->de_stat.ets_packetT++;
#if 0	/* Reserved in later manuals, should be ignored */
				if (!(tsr & TSR_DFR))
				{
					/* In most (all?) implementations of
					 * the dp8390, this bit is set
					 * when the packet is not deferred
					 */
					dep->de_stat.ets_transDef++;
				}
#endif
				if (tsr & TSR_COL) dep->de_stat.ets_collision++;
				if (tsr & TSR_ABT) dep->de_stat.ets_transAb++;
				if (tsr & TSR_CRS) dep->de_stat.ets_carrSense++;
				if (tsr & TSR_FU
					&& ++dep->de_stat.ets_fifoUnder <= 10)
				{
					printf("%s: fifo underrun\n",
						dep->de_name);
				}
				if (tsr & TSR_CDH
					&& ++dep->de_stat.ets_CDheartbeat <= 10)
				{
					printf("%s: CD heart beat failure\n",
						dep->de_name);
				}
				if (tsr & TSR_OWC) dep->de_stat.ets_OWC++;
			}
			sendq_tail= dep->de_sendq_tail;

			if (!(dep->de_sendq[sendq_tail].sq_filled))
			{
				/* Software bug? */
				assert(!debug);

				/* Or hardware bug? */
				printf(
				"%s: transmit interrupt, but not sending\n",
					dep->de_name);
				continue;
			}
			dep->de_sendq[sendq_tail].sq_filled= 0;
			if (++sendq_tail == dep->de_sendq_nr)
				sendq_tail= 0;
			dep->de_sendq_tail= sendq_tail;
			if (dep->de_sendq[sendq_tail].sq_filled)
			{
				size= dep->de_sendq[sendq_tail].sq_size;
				outb_reg0(dep, DP_TPSR,
					dep->de_sendq[sendq_tail].sq_sendpage);
				outb_reg0(dep, DP_TBCR1, size >> 8);
				outb_reg0(dep, DP_TBCR0, size & 0xff);
				outb_reg0(dep, DP_CR, CR_TXP | CR_EXTRA);
			}
			if (dep->de_flags & DEF_SEND_AVAIL)
				dp_send(dep);
		}

		if (isr & ISR_PRX)
		{
			/* Only call dp_recv if there is a read request */
			if (dep->de_flags & DEF_READING)
				dp_recv(dep);
		}
		
		if (isr & ISR_RXE) dep->de_stat.ets_recvErr++;
		if (isr & ISR_CNT)
		{
			dep->de_stat.ets_CRCerr += inb_reg0(dep, DP_CNTR0);
			dep->de_stat.ets_frameAll += inb_reg0(dep, DP_CNTR1);
			dep->de_stat.ets_missedP += inb_reg0(dep, DP_CNTR2);
		}
		if (isr & ISR_OVW)
		{
			dep->de_stat.ets_OVW++;
#if 0
			{ printW(); printf(
				"%s: got overwrite warning\n", dep->de_name); }
#endif
			if (dep->de_flags & DEF_READING)
			{
				printf(
"dp_check_ints: strange: overwrite warning and pending read request\n");
				dp_recv(dep);
			}
		}
		if (isr & ISR_RDC)
		{
			/* Nothing to do */
		}
		if (isr & ISR_RST)
		{
			/* this means we got an interrupt but the ethernet 
			 * chip is shutdown. We set the flag DEF_STOPPED,
			 * and continue processing arrived packets. When the
			 * receive buffer is empty, we reset the dp8390.
			 */
#if 0
			 { printW(); printf(
				"%s: NIC stopped\n", dep->de_name); }
#endif
			dep->de_flags |= DEF_STOPPED;
			break;
		}
	}
	if ((dep->de_flags & (DEF_READING|DEF_STOPPED)) == 
						(DEF_READING|DEF_STOPPED))
	{
		/* The chip is stopped, and all arrived packets are 
		 * delivered.
		 */
		dp_reset(dep);
	}
}

/*===========================================================================*
 *				dp_recv					     *
 *===========================================================================*/
static void dp_recv(dep)
dpeth_t *dep;
{
	dp_rcvhdr_t header;
	unsigned pageno, curr, next;
	vir_bytes length;
	int packet_processed, r;
	u16_t eth_type;

	packet_processed = FALSE;
	pageno = inb_reg0(dep, DP_BNRY) + 1;
	if (pageno == dep->de_stoppage) pageno = dep->de_startpage;

	do
	{
		outb_reg0(dep, DP_CR, CR_PS_P1 | CR_EXTRA);
		curr = inb_reg1(dep, DP_CURR);
		outb_reg0(dep, DP_CR, CR_PS_P0 | CR_EXTRA);

		if (curr == pageno) break;

		(dep->de_getblockf)(dep, pageno, (size_t)0, sizeof(header),
			&header);
		(dep->de_getblockf)(dep, pageno, sizeof(header) +
			2*sizeof(ether_addr_t), sizeof(eth_type), &eth_type);

		length = (header.dr_rbcl | (header.dr_rbch << 8)) -
			sizeof(dp_rcvhdr_t);
		next = header.dr_next;
		if (length < ETH_MIN_PACK_SIZE ||
			length > ETH_MAX_PACK_SIZE_TAGGED)
		{
			printf("%s: packet with strange length arrived: %d\n",
				dep->de_name, (int) length);
			next= curr;
		}
		else if (next < dep->de_startpage || next >= dep->de_stoppage)
		{
			printf("%s: strange next page\n", dep->de_name);
			next= curr;
		}
		else if (eth_type == eth_ign_proto)
		{
			/* Hack: ignore packets of a given protocol, useful
			 * if you share a net with 80 computers sending
			 * Amoeba FLIP broadcasts.  (Protocol 0x8146.)
			 */
			static int first= 1;
			if (first)
			{
				first= 0;
				printf("%s: dropping proto 0x%04x packets\n",
					dep->de_name,
					ntohs(eth_ign_proto));
			}
			dep->de_stat.ets_packetR++;
		}
		else if (header.dr_status & RSR_FO)
		{
			/* This is very serious, so we issue a warning and
			 * reset the buffers */
			printf("%s: fifo overrun, resetting receive buffer\n",
				dep->de_name);
			dep->de_stat.ets_fifoOver++;
			next = curr;
		}
		else if ((header.dr_status & RSR_PRX) &&
					   (dep->de_flags & DEF_ENABLED))
		{
			r = dp_pkt2user(dep, pageno, length);
			if (r != OK)
				return;

			packet_processed = TRUE;
			dep->de_stat.ets_packetR++;
		}
		if (next == dep->de_startpage)
			outb_reg0(dep, DP_BNRY, dep->de_stoppage - 1);
		else
			outb_reg0(dep, DP_BNRY, next - 1);

		pageno = next;
	}
	while (!packet_processed);
}

/*===========================================================================*
 *				dp_send					     *
 *===========================================================================*/
static void dp_send(dep)
dpeth_t *dep;
{
	if (!(dep->de_flags & DEF_SEND_AVAIL))
		return;

	dep->de_flags &= ~DEF_SEND_AVAIL;
	switch(dep->de_sendmsg.m_type)
	{
	case DL_WRITE:	do_vwrite(&dep->de_sendmsg, TRUE, FALSE);	break;
	case DL_WRITEV:	do_vwrite(&dep->de_sendmsg, TRUE, TRUE);	break;
	default:
		panic("", "dp8390: wrong type:", dep->de_sendmsg.m_type);
		break;
	}
}

/*===========================================================================*
 *				dp_getblock				     *
 *===========================================================================*/
static void dp_getblock(dep, page, offset, size, dst)
dpeth_t *dep;
int page;
size_t offset;
size_t size;
void *dst;
{
	int r;

	offset = page * DP_PAGESIZE + offset;

	r = sys_vircopy(SELF, BIOS_SEG, dep->de_linmem + offset,
		SELF, D, (vir_bytes)dst, size);

	if (r != OK)
		panic("DP8390", "dp_getblock: sys_vircopy failed", r);
}

/*===========================================================================*
 *				dp_pio8_getblock			     *
 *===========================================================================*/
static void dp_pio8_getblock(dep, page, offset, size, dst)
dpeth_t *dep;
int page;
size_t offset;
size_t size;
void *dst;
{
	offset = page * DP_PAGESIZE + offset;
	outb_reg0(dep, DP_RBCR0, size & 0xFF);
	outb_reg0(dep, DP_RBCR1, size >> 8);
	outb_reg0(dep, DP_RSAR0, offset & 0xFF);
	outb_reg0(dep, DP_RSAR1, offset >> 8);
	outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);

	insb(dep->de_data_port, dst, size);
}

/*===========================================================================*
 *				dp_pio16_getblock			     *
 *===========================================================================*/
static void dp_pio16_getblock(dep, page, offset, size, dst)
dpeth_t *dep;
int page;
size_t offset;
size_t size;
void *dst;
{
	offset = page * DP_PAGESIZE + offset;
	outb_reg0(dep, DP_RBCR0, size & 0xFF);
	outb_reg0(dep, DP_RBCR1, size >> 8);
	outb_reg0(dep, DP_RSAR0, offset & 0xFF);
	outb_reg0(dep, DP_RSAR1, offset >> 8);
	outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);

	assert (!(size & 1));
	insw(dep->de_data_port, dst, size);
}

/*===========================================================================*
 *				dp_pkt2user				     *
 *===========================================================================*/
static int dp_pkt2user(dep, page, length)
dpeth_t *dep;
int page, length;
{
	int last, count;

	if (!(dep->de_flags & DEF_READING))
		return EGENERIC;

	last = page + (length - 1) / DP_PAGESIZE;
	if (last >= dep->de_stoppage)
	{
		count = (dep->de_stoppage - page) * DP_PAGESIZE -
			sizeof(dp_rcvhdr_t);

		/* Save read_iovec since we need it twice. */
		dep->de_tmp_iovec = dep->de_read_iovec;
		(dep->de_nic2userf)(dep, page * DP_PAGESIZE +
			sizeof(dp_rcvhdr_t), &dep->de_tmp_iovec, 0, count);
		(dep->de_nic2userf)(dep, dep->de_startpage * DP_PAGESIZE, 
				&dep->de_read_iovec, count, length - count);
	}
	else
	{
		(dep->de_nic2userf)(dep, page * DP_PAGESIZE +
			sizeof(dp_rcvhdr_t), &dep->de_read_iovec, 0, length);
	}

	dep->de_read_s = length;
	dep->de_flags |= DEF_PACK_RECV;
	dep->de_flags &= ~DEF_READING;

	return OK;
}

/*===========================================================================*
 *				dp_user2nic				     *
 *===========================================================================*/
static void dp_user2nic(dep, iovp, offset, nic_addr, count)
dpeth_t *dep;
iovec_dat_t *iovp;
vir_bytes offset;
int nic_addr;
vir_bytes count;
{
	vir_bytes vir_hw, vir_user;
	int bytes, i, r;

	vir_hw = dep->de_linmem + nic_addr;

	i= 0;
	while (count > 0)
	{
		if (i >= IOVEC_NR)
		{
			dp_next_iovec(iovp);
			i= 0;
			continue;
		}
		assert(i < iovp->iod_iovec_s);
		if (offset >= iovp->iod_iovec[i].iov_size)
		{
			offset -= iovp->iod_iovec[i].iov_size;
			i++;
			continue;
		}
		bytes = iovp->iod_iovec[i].iov_size - offset;
		if (bytes > count)
			bytes = count;

		r= sys_vircopy(iovp->iod_proc_nr, D,
			iovp->iod_iovec[i].iov_addr + offset,
			SELF, BIOS_SEG, vir_hw, bytes);
		if (r != OK)
			panic("DP8390", "dp_user2nic: sys_vircopy failed", r);

		count -= bytes;
		vir_hw += bytes;
		offset += bytes;
	}
	assert(count == 0);
}

/*===========================================================================*
 *				dp_pio8_user2nic			     *
 *===========================================================================*/
static void dp_pio8_user2nic(dep, iovp, offset, nic_addr, count)
dpeth_t *dep;
iovec_dat_t *iovp;
vir_bytes offset;
int nic_addr;
vir_bytes count;
{
	phys_bytes phys_user;
	int bytes, i;

	outb_reg0(dep, DP_ISR, ISR_RDC);

	outb_reg0(dep, DP_RBCR0, count & 0xFF);
	outb_reg0(dep, DP_RBCR1, count >> 8);
	outb_reg0(dep, DP_RSAR0, nic_addr & 0xFF);
	outb_reg0(dep, DP_RSAR1, nic_addr >> 8);
	outb_reg0(dep, DP_CR, CR_DM_RW | CR_PS_P0 | CR_STA);

	i= 0;
	while (count > 0)
	{
		if (i >= IOVEC_NR)
		{
			dp_next_iovec(iovp);
			i= 0;
			continue;
		}
		assert(i < iovp->iod_iovec_s);
		if (offset >= iovp->iod_iovec[i].iov_size)
		{
			offset -= iovp->iod_iovec[i].iov_size;
			i++;
			continue;
		}
		bytes = iovp->iod_iovec[i].iov_size - offset;
		if (bytes > count)
			bytes = count;

		do_vir_outsb(dep->de_data_port, iovp->iod_proc_nr,
			iovp->iod_iovec[i].iov_addr + offset, bytes);
		count -= bytes;
		offset += bytes;
	}
	assert(count == 0);

	for (i= 0; i<100; i++)
	{
		if (inb_reg0(dep, DP_ISR) & ISR_RDC)
			break;
	}
	if (i == 100)
	{
		panic("", "dp8390: remote dma failed to complete", NO_NUM);
	}
}

/*===========================================================================*
 *				dp_pio16_user2nic			     *
 *===========================================================================*/
static void dp_pio16_user2nic(dep, iovp, offset, nic_addr, count)
dpeth_t *dep;
iovec_dat_t *iovp;
vir_bytes offset;
int nic_addr;
vir_bytes count;
{
	vir_bytes vir_user;
	vir_bytes ecount;
	int i, r, bytes, user_proc;
	u8_t two_bytes[2];
	int odd_byte;

	ecount= (count+1) & ~1;
	odd_byte= 0;

	outb_reg0(dep, DP_ISR, ISR_RDC);
	outb_reg0(dep, DP_RBCR0, ecount & 0xFF);
	outb_reg0(dep, DP_RBCR1, ecount >> 8);
	outb_reg0(dep, DP_RSAR0, nic_addr & 0xFF);
	outb_reg0(dep, DP_RSAR1, nic_addr >> 8);
	outb_reg0(dep, DP_CR, CR_DM_RW | CR_PS_P0 | CR_STA);

	i= 0;
	while (count > 0)
	{
		if (i >= IOVEC_NR)
		{
			dp_next_iovec(iovp);
			i= 0;
			continue;
		}
		assert(i < iovp->iod_iovec_s);
		if (offset >= iovp->iod_iovec[i].iov_size)
		{
			offset -= iovp->iod_iovec[i].iov_size;
			i++;
			continue;
		}
		bytes = iovp->iod_iovec[i].iov_size - offset;
		if (bytes > count)
			bytes = count;

		user_proc= iovp->iod_proc_nr;
		vir_user= iovp->iod_iovec[i].iov_addr + offset;
		if (odd_byte)
		{
			r= sys_vircopy(user_proc, D, vir_user, 
				SELF, D, (vir_bytes)&two_bytes[1], 1);
			if (r != OK)
			{
				panic("DP8390",
					"dp_pio16_user2nic: sys_vircopy failed",
					r);
			}
			outw(dep->de_data_port, *(u16_t *)two_bytes);
			count--;
			offset++;
			bytes--;
			vir_user++;
			odd_byte= 0;
			if (!bytes)
				continue;
		}
		ecount= bytes & ~1;
		if (ecount != 0)
		{
			do_vir_outsw(dep->de_data_port, user_proc, vir_user,
				ecount);
			count -= ecount;
			offset += ecount;
			bytes -= ecount;
			vir_user += ecount;
		}
		if (bytes)
		{
			assert(bytes == 1);
			r= sys_vircopy(user_proc, D, vir_user, 
				SELF, D, (vir_bytes)&two_bytes[0], 1);
			if (r != OK)
			{
				panic("DP8390",
					"dp_pio16_user2nic: sys_vircopy failed",
					r);
			}
			count--;
			offset++;
			bytes--;
			vir_user++;
			odd_byte= 1;
		}
	}
	assert(count == 0);

	if (odd_byte)
		outw(dep->de_data_port, *(u16_t *)two_bytes);

	for (i= 0; i<100; i++)
	{
		if (inb_reg0(dep, DP_ISR) & ISR_RDC)
			break;
	}
	if (i == 100)
	{
		panic("", "dp8390: remote dma failed to complete", NO_NUM);
	}
}

/*===========================================================================*
 *				dp_nic2user				     *
 *===========================================================================*/
static void dp_nic2user(dep, nic_addr, iovp, offset, count)
dpeth_t *dep;
int nic_addr;
iovec_dat_t *iovp;
vir_bytes offset;
vir_bytes count;
{
	vir_bytes vir_hw, vir_user;
	int bytes, i, r;

	vir_hw = dep->de_linmem + nic_addr;

	i= 0;
	while (count > 0)
	{
		if (i >= IOVEC_NR)
		{
			dp_next_iovec(iovp);
			i= 0;
			continue;
		}
		assert(i < iovp->iod_iovec_s);
		if (offset >= iovp->iod_iovec[i].iov_size)
		{
			offset -= iovp->iod_iovec[i].iov_size;
			i++;
			continue;
		}
		bytes = iovp->iod_iovec[i].iov_size - offset;
		if (bytes > count)
			bytes = count;

		r= sys_vircopy(SELF, BIOS_SEG, vir_hw,
			iovp->iod_proc_nr, D,
			iovp->iod_iovec[i].iov_addr + offset, bytes);
		if (r != OK)
			panic("DP8390", "dp_nic2user: sys_vircopy failed", r);

		count -= bytes;
		vir_hw += bytes;
		offset += bytes;
	}
	assert(count == 0);
}

/*===========================================================================*
 *				dp_pio8_nic2user			     *
 *===========================================================================*/
static void dp_pio8_nic2user(dep, nic_addr, iovp, offset, count)
dpeth_t *dep;
int nic_addr;
iovec_dat_t *iovp;
vir_bytes offset;
vir_bytes count;
{
	phys_bytes phys_user;
	int bytes, i;

	outb_reg0(dep, DP_RBCR0, count & 0xFF);
	outb_reg0(dep, DP_RBCR1, count >> 8);
	outb_reg0(dep, DP_RSAR0, nic_addr & 0xFF);
	outb_reg0(dep, DP_RSAR1, nic_addr >> 8);
	outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);

	i= 0;
	while (count > 0)
	{
		if (i >= IOVEC_NR)
		{
			dp_next_iovec(iovp);
			i= 0;
			continue;
		}
		assert(i < iovp->iod_iovec_s);
		if (offset >= iovp->iod_iovec[i].iov_size)
		{
			offset -= iovp->iod_iovec[i].iov_size;
			i++;
			continue;
		}
		bytes = iovp->iod_iovec[i].iov_size - offset;
		if (bytes > count)
			bytes = count;

		do_vir_insb(dep->de_data_port, iovp->iod_proc_nr,
			iovp->iod_iovec[i].iov_addr + offset, bytes);
		count -= bytes;
		offset += bytes;
	}
	assert(count == 0);
}

/*===========================================================================*
 *				dp_pio16_nic2user			     *
 *===========================================================================*/
static void dp_pio16_nic2user(dep, nic_addr, iovp, offset, count)
dpeth_t *dep;
int nic_addr;
iovec_dat_t *iovp;
vir_bytes offset;
vir_bytes count;
{
	vir_bytes vir_user;
	vir_bytes ecount;
	int i, r, bytes, user_proc;
	u8_t two_bytes[2];
	int odd_byte;

	ecount= (count+1) & ~1;
	odd_byte= 0;

	outb_reg0(dep, DP_RBCR0, ecount & 0xFF);
	outb_reg0(dep, DP_RBCR1, ecount >> 8);
	outb_reg0(dep, DP_RSAR0, nic_addr & 0xFF);
	outb_reg0(dep, DP_RSAR1, nic_addr >> 8);
	outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);

	i= 0;
	while (count > 0)
	{
		if (i >= IOVEC_NR)
		{
			dp_next_iovec(iovp);
			i= 0;
			continue;
		}
		assert(i < iovp->iod_iovec_s);
		if (offset >= iovp->iod_iovec[i].iov_size)
		{
			offset -= iovp->iod_iovec[i].iov_size;
			i++;
			continue;
		}
		bytes = iovp->iod_iovec[i].iov_size - offset;
		if (bytes > count)
			bytes = count;

		user_proc= iovp->iod_proc_nr;
		vir_user= iovp->iod_iovec[i].iov_addr + offset;
		if (odd_byte)
		{
			r= sys_vircopy(SELF, D, (vir_bytes)&two_bytes[1],
				user_proc, D, vir_user,  1);
			if (r != OK)
			{
				panic("DP8390",
					"dp_pio16_nic2user: sys_vircopy failed",
					r);
			}
			count--;
			offset++;
			bytes--;
			vir_user++;
			odd_byte= 0;
			if (!bytes)
				continue;
		}
		ecount= bytes & ~1;
		if (ecount != 0)
		{
			do_vir_insw(dep->de_data_port, user_proc, vir_user,
				ecount);
			count -= ecount;
			offset += ecount;
			bytes -= ecount;
			vir_user += ecount;
		}
		if (bytes)
		{
			assert(bytes == 1);
			*(u16_t *)two_bytes= inw(dep->de_data_port);
			r= sys_vircopy(SELF, D, (vir_bytes)&two_bytes[0],
				user_proc, D, vir_user,  1);
			if (r != OK)
			{
				panic("DP8390",
					"dp_pio16_nic2user: sys_vircopy failed",
					r);
			}
			count--;
			offset++;
			bytes--;
			vir_user++;
			odd_byte= 1;
		}
	}
	assert(count == 0);
}

/*===========================================================================*
 *				dp_next_iovec					     *
 *===========================================================================*/
static void dp_next_iovec(iovp)
iovec_dat_t *iovp;
{
	assert(iovp->iod_iovec_s > IOVEC_NR);

	iovp->iod_iovec_s -= IOVEC_NR;

	iovp->iod_iovec_addr += IOVEC_NR * sizeof(iovec_t);

	get_userdata(iovp->iod_proc_nr, iovp->iod_iovec_addr, 
		(iovp->iod_iovec_s > IOVEC_NR ? IOVEC_NR : iovp->iod_iovec_s) *
		sizeof(iovec_t), iovp->iod_iovec); 
}

/*===========================================================================*
 *				conf_hw					     *
 *===========================================================================*/
static void conf_hw(dep)
dpeth_t *dep;
{
	static eth_stat_t empty_stat = {0, 0, 0, 0, 0, 0 	/* ,... */ };

	int ifnr;
	dp_conf_t *dcp;

	dep->de_mode= DEM_DISABLED;	/* Superfluous */
	ifnr= dep-de_table;

	dcp= &dp_conf[ifnr];
	update_conf(dep, dcp);
	if (dep->de_mode != DEM_ENABLED)
		return;
	if (!wdeth_probe(dep) && !ne_probe(dep) && !el2_probe(dep))
	{
		printf("%s: No ethernet card found at 0x%x\n", 
			dep->de_name, dep->de_base_port);
		dep->de_mode= DEM_DISABLED;
		return;
	}

/* XXX */ if (dep->de_linmem == 0) dep->de_linmem= 0xFFFF0000;

	dep->de_flags = DEF_EMPTY;
	dep->de_stat = empty_stat;
}

/*===========================================================================*
 *				update_conf				     *
 *===========================================================================*/
static void update_conf(dep, dcp)
dpeth_t *dep;
dp_conf_t *dcp;
{
	long v;
	static char dpc_fmt[] = "x:d:x:x";

#if ENABLE_PCI
	if (dep->de_pci)
	{
		if (dep->de_pci == 1)
		{
			/* PCI device is present */
			dep->de_mode= DEM_ENABLED;
		}
		return;		/* Already configured */
	}
#endif

	/* Get the default settings and modify them from the environment. */
	dep->de_mode= DEM_SINK;
	v= dcp->dpc_port;
	switch (env_parse(dcp->dpc_envvar, dpc_fmt, 0, &v, 0x0000L, 0xFFFFL)) {
	case EP_OFF:
		dep->de_mode= DEM_DISABLED;
		break;
	case EP_ON:
	case EP_SET:
		dep->de_mode= DEM_ENABLED;	/* Might become disabled if 
						 * all probes fail */
		break;
	}
	dep->de_base_port= v;

	v= dcp->dpc_irq | DEI_DEFAULT;
	(void) env_parse(dcp->dpc_envvar, dpc_fmt, 1, &v, 0L,
						(long) NR_IRQ_VECTORS - 1);
	dep->de_irq= v;

	v= dcp->dpc_mem;
	(void) env_parse(dcp->dpc_envvar, dpc_fmt, 2, &v, 0L, 0xFFFFFL);
	dep->de_linmem= v;

	v= 0;
	(void) env_parse(dcp->dpc_envvar, dpc_fmt, 3, &v, 0x2000L, 0x8000L);
	dep->de_ramsize= v;
}

/*===========================================================================*
 *				calc_iovec_size				     *
 *===========================================================================*/
static int calc_iovec_size(iovp)
iovec_dat_t *iovp;
{
	/* Calculate the size of a request. Note that the iovec_dat
	 * structure will be unusable after calc_iovec_size.
	 */
	int size;
	int i;

	size= 0;
	i= 0;
	while (i < iovp->iod_iovec_s)
	{
		if (i >= IOVEC_NR)
		{
			dp_next_iovec(iovp);
			i= 0;
			continue;
		}
		size += iovp->iod_iovec[i].iov_size;
		i++;
	}
	return size;
}

/*===========================================================================*
 *				reply					     *
 *===========================================================================*/
static void reply(dep, err, may_block)
dpeth_t *dep;
int err;
int may_block;
{
	message reply;
	int status;
	int r;

	status = 0;
	if (dep->de_flags & DEF_PACK_SEND)
		status |= DL_PACK_SEND;
	if (dep->de_flags & DEF_PACK_RECV)
		status |= DL_PACK_RECV;

	reply.m_type = DL_TASK_REPLY;
	reply.DL_PORT = dep - de_table;
	reply.DL_PROC = dep->de_client;
	reply.DL_STAT = status | ((u32_t) err << 16);
	reply.DL_COUNT = dep->de_read_s;
	reply.DL_CLCK = 0;	/* Don't know */
	r= send(dep->de_client, &reply);

	if (r == ELOCKED && may_block)
	{
#if 0
		printf("send locked\n");
#endif
		return;
	}

	if (r < 0)
		panic("", "dp8390: send failed:", r);
	
	dep->de_read_s = 0;
	dep->de_flags &= ~(DEF_PACK_SEND | DEF_PACK_RECV);
}

/*===========================================================================*
 *				mess_reply				     *
 *===========================================================================*/
static void mess_reply(req, reply_mess)
message *req;
message *reply_mess;
{
	if (send(req->m_source, reply_mess) != OK)
		panic("", "dp8390: unable to mess_reply", NO_NUM);
}

/*===========================================================================*
 *				get_userdata				     *
 *===========================================================================*/
static void get_userdata(user_proc, user_addr, count, loc_addr)
int user_proc;
vir_bytes user_addr;
vir_bytes count;
void *loc_addr;
{
	int r;

	r= sys_vircopy(user_proc, D, user_addr,
		SELF, D, (vir_bytes)loc_addr, count);
	if (r != OK)
		panic("DP8390", "get_userdata: sys_vircopy failed", r);
}

/*===========================================================================*
 *				put_userdata				     *
 *===========================================================================*/
static void put_userdata(user_proc, user_addr, count, loc_addr)
int user_proc;
vir_bytes user_addr;
vir_bytes count;
void *loc_addr;
{
	int r;

	r= sys_vircopy(SELF, D, (vir_bytes)loc_addr, 
		user_proc, D, user_addr, count);
	if (r != OK)
		panic("DP8390", "put_userdata: sys_vircopy failed", r);
}

u8_t inb(port_t port)
{
	int r;
	u32_t value;

	r= sys_inb(port, &value);
	if (r != OK)
		panic("DP8390","sys_inb failed", r);
	return value;
}

u16_t inw(port_t port)
{
	int r;
	unsigned long value;

	r= sys_inw(port, &value);
	if (r != OK)
		panic("DP8390", "sys_inw failed", r);
	return (u16_t) value;
}

void outb(port_t port, u8_t value)
{
	int r;

	r= sys_outb(port, value);
	if (r != OK)
		panic("DP8390", "sys_outb failed", r);
}

void outw(port_t port, u16_t value)
{
	int r;

	r= sys_outw(port, value);
	if (r != OK)
		panic("DP8390", "sys_outw failed", r);
}

static void insb(port_t port, void *buf, size_t size)
{
	do_vir_insb(port, SELF, (vir_bytes)buf, size);
}

static void insw(port_t port, void *buf, size_t size)
{
	do_vir_insw(port, SELF, (vir_bytes)buf, size);
}

static void do_vir_insb(port_t port, int proc, vir_bytes buf, size_t size)
{
	int r;

	r= sys_sdevio(DIO_INPUT, port, DIO_BYTE, proc, (void *)buf, size);
	if (r != OK)
		panic("DP8390", "sys_sdevio failed", r);
}

static void do_vir_insw(port_t port, int proc, vir_bytes buf, size_t size)
{
	int r;

	r= sys_sdevio(DIO_INPUT, port, DIO_WORD, proc, (void *)buf, size);
	if (r != OK)
		panic("DP8390", "sys_sdevio failed", r);
}

static void do_vir_outsb(port_t port, int proc, vir_bytes buf, size_t size)
{
	int r;

	r= sys_sdevio(DIO_OUTPUT, port, DIO_BYTE, proc, (void *)buf, size);
	if (r != OK)
		panic("DP8390", "sys_sdevio failed", r);
}

static void do_vir_outsw(port_t port, int proc, vir_bytes buf, size_t size)
{
	int r;

	r= sys_sdevio(DIO_OUTPUT, port, DIO_WORD, proc, (void *)buf, size);
	if (r != OK)
		panic("DP8390", "sys_sdevio failed", r);
}

/*
 * $PchId: dp8390.c,v 1.25 2005/02/10 17:32:07 philip Exp $
 */