minix/servers/vfs/main.c

860 lines
24 KiB
C
Raw Normal View History

/*
2005-04-21 16:53:53 +02:00
* a loop that gets messages requesting work, carries out the work, and sends
* replies.
*
* The entry points into this file are:
* main: main program of the Virtual File System
2005-04-21 16:53:53 +02:00
* reply: send a reply to a process after the requested work is done
*
*/
#include "fs.h"
#include <fcntl.h>
#include <string.h>
#include <stdio.h>
#include <signal.h>
#include <assert.h>
2005-04-21 16:53:53 +02:00
#include <stdlib.h>
#include <sys/ioc_memory.h>
#include <sys/svrctl.h>
#include <sys/select.h>
2005-04-21 16:53:53 +02:00
#include <minix/callnr.h>
#include <minix/com.h>
#include <minix/const.h>
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
#include <minix/endpoint.h>
#include <minix/safecopies.h>
#include <minix/debug.h>
2012-02-13 16:28:04 +01:00
#include <minix/vfsif.h>
2005-04-21 16:53:53 +02:00
#include "file.h"
2012-02-13 16:28:04 +01:00
#include "scratchpad.h"
#include "vmnt.h"
#include "vnode.h"
2005-04-21 16:53:53 +02:00
#if ENABLE_SYSCALL_STATS
EXTERN unsigned long calls_stats[NR_VFS_CALLS];
#endif
2012-02-13 16:28:04 +01:00
/* Thread related prototypes */
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
static void do_reply(struct worker_thread *wp);
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void do_work(void);
static void do_init_root(void);
static void handle_work(void (*func)(void));
static void reply(message *m_out, endpoint_t whom, int result);
2012-03-25 20:25:53 +02:00
static void get_work(void);
static void service_pm(void);
static int unblock(struct fproc *rfp);
2005-04-21 16:53:53 +02:00
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* SEF functions and variables. */
2012-03-25 20:25:53 +02:00
static void sef_local_startup(void);
static int sef_cb_init_fresh(int type, sef_init_info_t *info);
static endpoint_t receive_from;
2005-04-21 16:53:53 +02:00
/*===========================================================================*
* main *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
int main(void)
2005-04-21 16:53:53 +02:00
{
/* This is the main program of the file system. The main loop consists of
* three major activities: getting new work, processing the work, and sending
* the reply. This loop never terminates as long as the file system runs.
*/
int transid;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
struct worker_thread *wp;
2005-04-21 16:53:53 +02:00
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* SEF local startup. */
sef_local_startup();
2012-02-13 16:28:04 +01:00
printf("Started VFS: %d worker thread(s)\n", NR_WTHREADS);
No more intel/minix segments. This commit removes all traces of Minix segments (the text/data/stack memory map abstraction in the kernel) and significance of Intel segments (hardware segments like CS, DS that add offsets to all addressing before page table translation). This ultimately simplifies the memory layout and addressing and makes the same layout possible on non-Intel architectures. There are only two types of addresses in the world now: virtual and physical; even the kernel and processes have the same virtual address space. Kernel and user processes can be distinguished at a glance as processes won't use 0xF0000000 and above. No static pre-allocated memory sizes exist any more. Changes to booting: . The pre_init.c leaves the kernel and modules exactly as they were left by the bootloader in physical memory . The kernel starts running using physical addressing, loaded at a fixed location given in its linker script by the bootloader. All code and data in this phase are linked to this fixed low location. . It makes a bootstrap pagetable to map itself to a fixed high location (also in linker script) and jumps to the high address. All code and data then use this high addressing. . All code/data symbols linked at the low addresses is prefixed by an objcopy step with __k_unpaged_*, so that that code cannot reference highly-linked symbols (which aren't valid yet) or vice versa (symbols that aren't valid any more). . The two addressing modes are separated in the linker script by collecting the unpaged_*.o objects and linking them with low addresses, and linking the rest high. Some objects are linked twice, once low and once high. . The bootstrap phase passes a lot of information (e.g. free memory list, physical location of the modules, etc.) using the kinfo struct. . After this bootstrap the low-linked part is freed. . The kernel maps in VM into the bootstrap page table so that VM can begin executing. Its first job is to make page tables for all other boot processes. So VM runs before RS, and RS gets a fully dynamic, VM-managed address space. VM gets its privilege info from RS as usual but that happens after RS starts running. . Both the kernel loading VM and VM organizing boot processes happen using the libexec logic. This removes the last reason for VM to still know much about exec() and vm/exec.c is gone. Further Implementation: . All segments are based at 0 and have a 4 GB limit. . The kernel is mapped in at the top of the virtual address space so as not to constrain the user processes. . Processes do not use segments from the LDT at all; there are no segments in the LDT any more, so no LLDT is needed. . The Minix segments T/D/S are gone and so none of the user-space or in-kernel copy functions use them. The copy functions use a process endpoint of NONE to realize it's a physical address, virtual otherwise. . The umap call only makes sense to translate a virtual address to a physical address now. . Segments-related calls like newmap and alloc_segments are gone. . All segments-related translation in VM is gone (vir2map etc). . Initialization in VM is simpler as no moving around is necessary. . VM and all other boot processes can be linked wherever they wish and will be mapped in at the right location by the kernel and VM respectively. Other changes: . The multiboot code is less special: it does not use mb_print for its diagnostics any more but uses printf() as normal, saving the output into the diagnostics buffer, only printing to the screen using the direct print functions if a panic() occurs. . The multiboot code uses the flexible 'free memory map list' style to receive the list of free memory if available. . The kernel determines the memory layout of the processes to a degree: it tells VM where the kernel starts and ends and where the kernel wants the top of the process to be. VM then uses this entire range, i.e. the stack is right at the top, and mmap()ped bits of memory are placed below that downwards, and the break grows upwards. Other Consequences: . Every process gets its own page table as address spaces can't be separated any more by segments. . As all segments are 0-based, there is no distinction between virtual and linear addresses, nor between userspace and kernel addresses. . Less work is done when context switching, leading to a net performance increase. (8% faster on my machine for 'make servers'.) . The layout and configuration of the GDT makes sysenter and syscall possible.
2012-05-07 16:03:35 +02:00
if (OK != (sys_getkinfo(&kinfo)))
panic("couldn't get kernel kinfo");
2005-04-21 16:53:53 +02:00
/* This is the main loop that gets work, processes it, and sends replies. */
while (TRUE) {
2012-02-13 16:28:04 +01:00
yield_all(); /* let other threads run */
self = NULL;
2012-02-13 16:28:04 +01:00
send_work();
get_work();
transid = TRNS_GET_ID(m_in.m_type);
if (IS_VFS_FS_TRANSID(transid)) {
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
wp = worker_get((thread_t) transid - VFS_TRANSID);
if (wp == NULL || wp->w_fp == NULL) {
printf("VFS: spurious message %d from endpoint %d\n",
m_in.m_type, m_in.m_source);
continue;
}
m_in.m_type = TRNS_DEL_ID(m_in.m_type);
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
do_reply(wp);
continue;
2012-02-13 16:28:04 +01:00
} else if (who_e == PM_PROC_NR) { /* Calls from PM */
/* Special control messages from PM */
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
service_pm();
continue;
2012-02-13 16:28:04 +01:00
} else if (is_notify(call_nr)) {
/* A task ipc_notify()ed us */
switch (who_e) {
case DS_PROC_NR:
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Start a thread to handle DS events, if no thread
* is pending or active for it already. DS is not
* supposed to issue calls to VFS or be the subject of
* postponed PM requests, so this should be no problem.
*/
if (worker_can_start(fp))
handle_work(ds_event);
break;
case KERNEL:
mthread_stacktraces();
break;
case CLOCK:
/* Timer expired. Used only for select(). Check it. */
expire_timers(m_in.m_notify.timestamp);
break;
default:
printf("VFS: ignoring notification from %d\n", who_e);
}
continue;
2012-02-13 16:28:04 +01:00
} else if (who_p < 0) { /* i.e., message comes from a task */
/* We're going to ignore this message. Tasks should
* send ipc_notify()s only.
2012-02-13 16:28:04 +01:00
*/
printf("VFS: ignoring message from %d (%d)\n", who_e, call_nr);
continue;
}
2012-02-13 16:28:04 +01:00
if (IS_BDEV_RS(call_nr)) {
/* We've got results for a block device request. */
bdev_reply();
} else if (IS_CDEV_RS(call_nr)) {
/* We've got results for a character device request. */
cdev_reply();
2012-02-13 16:28:04 +01:00
} else {
/* Normal syscall. This spawns a new thread. */
2012-02-13 16:28:04 +01:00
handle_work(do_work);
}
2012-02-13 16:28:04 +01:00
}
return(OK); /* shouldn't come here */
}
2012-02-13 16:28:04 +01:00
/*===========================================================================*
* handle_work *
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void handle_work(void (*func)(void))
2012-02-13 16:28:04 +01:00
{
/* Handle asynchronous device replies and new system calls. If the originating
* endpoint is an FS endpoint, take extra care not to get in deadlock. */
struct vmnt *vmp = NULL;
endpoint_t proc_e;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
int use_spare = FALSE;
2012-02-13 16:28:04 +01:00
proc_e = m_in.m_source;
if (fp->fp_flags & FP_SRV_PROC) {
vmp = find_vmnt(proc_e);
if (vmp != NULL) {
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* A callback from an FS endpoint. Can do only one at once. */
if (vmp->m_flags & VMNT_CALLBACK) {
replycode(proc_e, EAGAIN);
return;
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Already trying to resolve a deadlock? Can't handle more. */
if (worker_available() == 0) {
replycode(proc_e, EAGAIN);
return;
}
/* A thread is available. Set callback flag. */
vmp->m_flags |= VMNT_CALLBACK;
if (vmp->m_flags & VMNT_MOUNTING) {
vmp->m_flags |= VMNT_FORCEROOTBSF;
}
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Use the spare thread to handle this request if needed. */
use_spare = TRUE;
2012-02-13 16:28:04 +01:00
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
worker_start(fp, func, &m_in, use_spare);
2012-02-13 16:28:04 +01:00
}
2012-02-13 16:28:04 +01:00
/*===========================================================================*
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
* do_reply *
2012-02-13 16:28:04 +01:00
*===========================================================================*/
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
static void do_reply(struct worker_thread *wp)
2012-02-13 16:28:04 +01:00
{
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
struct vmnt *vmp = NULL;
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
if(who_e != VM_PROC_NR && (vmp = find_vmnt(who_e)) == NULL)
2012-02-13 16:28:04 +01:00
panic("Couldn't find vmnt for endpoint %d", who_e);
VFS: make all IPC asynchronous By decoupling synchronous drivers from VFS, we are a big step closer to supporting driver crashes under all circumstances. That is, VFS can't become stuck on IPC with a synchronous driver (e.g., INET) and can recover from crashing block drivers during open/close/ioctl or during communication with an FS. In order to maintain serialized communication with a synchronous driver, the communication is wrapped by a mutex on a per driver basis (not major numbers as there can be multiple majors with identical endpoints). Majors that share a driver endpoint point to a single mutex object. In order to support crashes from block drivers, the file reopen tactic had to be changed; first reopen files associated with the crashed driver, then send the new driver endpoint to FSes. This solves a deadlock between the FS and the block driver; - VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it after retrying the current request to the newly started driver. - The block driver would refuse the retried request until all files had been reopened. - VFS would reopen files only after getting a reply from the initial REQ_NEW_DRIVER. When a character special driver crashes, all associated files have to be marked invalid and closed (or reopened if flagged as such). However, they can only be closed if a thread holds exclusive access to it. To obtain exclusive access, the worker thread (which handles the new driver endpoint event from DS) schedules a new job to garbage collect invalid files. This way, we can signal the worker thread that was talking to the crashed driver and will release exclusive access to a file associated with the crashed driver and prevent the garbage collecting worker thread from dead locking on that file. Also, when a character special driver crashes, RS will unmap the driver and remap it upon restart. During unmapping, associated files are marked invalid instead of waiting for an endpoint up event from DS, as that event might come later than new read/write/select requests and thus cause confusion in the freshly started driver. When locking a filp, the usage counters are no longer checked. The usage counter can legally go down to zero during filp invalidation while there are locks pending. DS events are handled by a separate worker thread instead of the main thread as reopening files could lead to another crash and a stuck thread. An additional worker thread is then necessary to unlock it. Finally, with everything asynchronous a race condition in do_select surfaced. A select entry was only marked in use after succesfully sending initial select requests to drivers and having to wait. When multiple select() calls were handled there was opportunity that these entries were overwritten. This had as effect that some select results were ignored (and select() remained blocking instead if returning) or do_select tried to access filps that were not present (because thrown away by secondary select()). This bug manifested itself with sendrecs, but was very hard to reproduce. However, it became awfully easy to trigger with asynsends only.
2012-08-28 16:06:51 +02:00
if (wp->w_task != who_e) {
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
printf("VFS: tid %d: expected %d to reply, not %d\n",
wp->w_tid, wp->w_task, who_e);
VFS: make all IPC asynchronous By decoupling synchronous drivers from VFS, we are a big step closer to supporting driver crashes under all circumstances. That is, VFS can't become stuck on IPC with a synchronous driver (e.g., INET) and can recover from crashing block drivers during open/close/ioctl or during communication with an FS. In order to maintain serialized communication with a synchronous driver, the communication is wrapped by a mutex on a per driver basis (not major numbers as there can be multiple majors with identical endpoints). Majors that share a driver endpoint point to a single mutex object. In order to support crashes from block drivers, the file reopen tactic had to be changed; first reopen files associated with the crashed driver, then send the new driver endpoint to FSes. This solves a deadlock between the FS and the block driver; - VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it after retrying the current request to the newly started driver. - The block driver would refuse the retried request until all files had been reopened. - VFS would reopen files only after getting a reply from the initial REQ_NEW_DRIVER. When a character special driver crashes, all associated files have to be marked invalid and closed (or reopened if flagged as such). However, they can only be closed if a thread holds exclusive access to it. To obtain exclusive access, the worker thread (which handles the new driver endpoint event from DS) schedules a new job to garbage collect invalid files. This way, we can signal the worker thread that was talking to the crashed driver and will release exclusive access to a file associated with the crashed driver and prevent the garbage collecting worker thread from dead locking on that file. Also, when a character special driver crashes, RS will unmap the driver and remap it upon restart. During unmapping, associated files are marked invalid instead of waiting for an endpoint up event from DS, as that event might come later than new read/write/select requests and thus cause confusion in the freshly started driver. When locking a filp, the usage counters are no longer checked. The usage counter can legally go down to zero during filp invalidation while there are locks pending. DS events are handled by a separate worker thread instead of the main thread as reopening files could lead to another crash and a stuck thread. An additional worker thread is then necessary to unlock it. Finally, with everything asynchronous a race condition in do_select surfaced. A select entry was only marked in use after succesfully sending initial select requests to drivers and having to wait. When multiple select() calls were handled there was opportunity that these entries were overwritten. This had as effect that some select results were ignored (and select() remained blocking instead if returning) or do_select tried to access filps that were not present (because thrown away by secondary select()). This bug manifested itself with sendrecs, but was very hard to reproduce. However, it became awfully easy to trigger with asynsends only.
2012-08-28 16:06:51 +02:00
}
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
*wp->w_sendrec = m_in;
VFS: make all IPC asynchronous By decoupling synchronous drivers from VFS, we are a big step closer to supporting driver crashes under all circumstances. That is, VFS can't become stuck on IPC with a synchronous driver (e.g., INET) and can recover from crashing block drivers during open/close/ioctl or during communication with an FS. In order to maintain serialized communication with a synchronous driver, the communication is wrapped by a mutex on a per driver basis (not major numbers as there can be multiple majors with identical endpoints). Majors that share a driver endpoint point to a single mutex object. In order to support crashes from block drivers, the file reopen tactic had to be changed; first reopen files associated with the crashed driver, then send the new driver endpoint to FSes. This solves a deadlock between the FS and the block driver; - VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it after retrying the current request to the newly started driver. - The block driver would refuse the retried request until all files had been reopened. - VFS would reopen files only after getting a reply from the initial REQ_NEW_DRIVER. When a character special driver crashes, all associated files have to be marked invalid and closed (or reopened if flagged as such). However, they can only be closed if a thread holds exclusive access to it. To obtain exclusive access, the worker thread (which handles the new driver endpoint event from DS) schedules a new job to garbage collect invalid files. This way, we can signal the worker thread that was talking to the crashed driver and will release exclusive access to a file associated with the crashed driver and prevent the garbage collecting worker thread from dead locking on that file. Also, when a character special driver crashes, RS will unmap the driver and remap it upon restart. During unmapping, associated files are marked invalid instead of waiting for an endpoint up event from DS, as that event might come later than new read/write/select requests and thus cause confusion in the freshly started driver. When locking a filp, the usage counters are no longer checked. The usage counter can legally go down to zero during filp invalidation while there are locks pending. DS events are handled by a separate worker thread instead of the main thread as reopening files could lead to another crash and a stuck thread. An additional worker thread is then necessary to unlock it. Finally, with everything asynchronous a race condition in do_select surfaced. A select entry was only marked in use after succesfully sending initial select requests to drivers and having to wait. When multiple select() calls were handled there was opportunity that these entries were overwritten. This had as effect that some select results were ignored (and select() remained blocking instead if returning) or do_select tried to access filps that were not present (because thrown away by secondary select()). This bug manifested itself with sendrecs, but was very hard to reproduce. However, it became awfully easy to trigger with asynsends only.
2012-08-28 16:06:51 +02:00
wp->w_task = NONE;
make vfs & filesystems use failable copying Change the kernel to add features to vircopy and safecopies so that transparent copy fixing won't happen to avoid deadlocks, and such copies fail with EFAULT. Transparently making copying work from filesystems (as normally done by the kernel & VM when copying fails because of missing/readonly memory) is problematic as it can happen that, for file-mapped ranges, that that same filesystem that is blocked on the copy request is needed to satisfy the memory range, leading to deadlock. Dito for VFS itself, if done with a blocking call. This change makes the copying done from a filesystem fail in such cases with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call fails with EFAULT, VFS will then request the range to be made available to VM after the FS is unblocked, allowing it to be used to satisfy the range if need be in another VFS thread. Similarly, for datacopies that VFS itself does, it uses the failable vircopy variant and callers use a wrapper that talk to VM if necessary to get the copy to work. . kernel: add CPF_TRY flag to safecopies . kernel: only request writable ranges to VM for the target buffer when copying fails . do copying in VFS TRY-first . some fixes in VM to build SANITYCHECK mode . add regression test for the cases where - a FS system call needs memory mapped in a process that the FS itself must map. - such a range covers more than one file-mapped region. . add 'try' mode to vircopy, physcopy . add flags field to copy kernel call messages . if CP_FLAG_TRY is set, do not transparently try to fix memory ranges . for use by VFS when accessing user buffers to avoid deadlock . remove some obsolete backwards compatability assignments . VFS: let thread scheduling work for VM requests too Allows VFS to make calls to VM while suspending and resuming the currently running thread. Does currently not work for the main thread. . VM: add fix memory range call for use by VFS Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
2014-01-16 14:22:13 +01:00
if(vmp) vmp->m_comm.c_cur_reqs--; /* We've got our reply, make room for others */
VFS: make all IPC asynchronous By decoupling synchronous drivers from VFS, we are a big step closer to supporting driver crashes under all circumstances. That is, VFS can't become stuck on IPC with a synchronous driver (e.g., INET) and can recover from crashing block drivers during open/close/ioctl or during communication with an FS. In order to maintain serialized communication with a synchronous driver, the communication is wrapped by a mutex on a per driver basis (not major numbers as there can be multiple majors with identical endpoints). Majors that share a driver endpoint point to a single mutex object. In order to support crashes from block drivers, the file reopen tactic had to be changed; first reopen files associated with the crashed driver, then send the new driver endpoint to FSes. This solves a deadlock between the FS and the block driver; - VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it after retrying the current request to the newly started driver. - The block driver would refuse the retried request until all files had been reopened. - VFS would reopen files only after getting a reply from the initial REQ_NEW_DRIVER. When a character special driver crashes, all associated files have to be marked invalid and closed (or reopened if flagged as such). However, they can only be closed if a thread holds exclusive access to it. To obtain exclusive access, the worker thread (which handles the new driver endpoint event from DS) schedules a new job to garbage collect invalid files. This way, we can signal the worker thread that was talking to the crashed driver and will release exclusive access to a file associated with the crashed driver and prevent the garbage collecting worker thread from dead locking on that file. Also, when a character special driver crashes, RS will unmap the driver and remap it upon restart. During unmapping, associated files are marked invalid instead of waiting for an endpoint up event from DS, as that event might come later than new read/write/select requests and thus cause confusion in the freshly started driver. When locking a filp, the usage counters are no longer checked. The usage counter can legally go down to zero during filp invalidation while there are locks pending. DS events are handled by a separate worker thread instead of the main thread as reopening files could lead to another crash and a stuck thread. An additional worker thread is then necessary to unlock it. Finally, with everything asynchronous a race condition in do_select surfaced. A select entry was only marked in use after succesfully sending initial select requests to drivers and having to wait. When multiple select() calls were handled there was opportunity that these entries were overwritten. This had as effect that some select results were ignored (and select() remained blocking instead if returning) or do_select tried to access filps that were not present (because thrown away by secondary select()). This bug manifested itself with sendrecs, but was very hard to reproduce. However, it became awfully easy to trigger with asynsends only.
2012-08-28 16:06:51 +02:00
worker_signal(wp); /* Continue this thread */
2012-02-13 16:28:04 +01:00
}
/*===========================================================================*
* do_pending_pipe *
2012-02-13 16:28:04 +01:00
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void do_pending_pipe(void)
2012-02-13 16:28:04 +01:00
{
int r, op;
struct filp *f;
tll_access_t locktype;
f = scratch(fp).file.filp;
assert(f != NULL);
scratch(fp).file.filp = NULL;
locktype = (job_call_nr == VFS_READ) ? VNODE_READ : VNODE_WRITE;
op = (job_call_nr == VFS_READ) ? READING : WRITING;
2012-02-13 16:28:04 +01:00
lock_filp(f, locktype);
r = rw_pipe(op, who_e, f, scratch(fp).io.io_buffer, scratch(fp).io.io_nbytes);
if (r != SUSPEND) /* Do we have results to report? */
replycode(fp->fp_endpoint, r);
2012-02-13 16:28:04 +01:00
unlock_filp(f);
}
/*===========================================================================*
* do_work *
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void do_work(void)
2012-02-13 16:28:04 +01:00
{
unsigned int call_index;
2012-02-13 16:28:04 +01:00
int error;
if (fp->fp_pid == PID_FREE) {
/* Process vanished before we were able to handle request.
* Replying has no use. Just drop it.
*/
return;
}
memset(&job_m_out, 0, sizeof(job_m_out));
2012-02-13 16:28:04 +01:00
/* At this point we assume that we're dealing with a call that has been
* made specifically to VFS. Typically it will be a POSIX call from a
* normal process, but we also handle a few calls made by drivers such
* such as UDS and VND through here. Call the internal function that
* does the work.
*/
if (IS_VFS_CALL(job_call_nr)) {
call_index = (unsigned int) (job_call_nr - VFS_BASE);
if (call_index < NR_VFS_CALLS && call_vec[call_index] != NULL) {
#if ENABLE_SYSCALL_STATS
calls_stats[call_index]++;
#endif
error = (*call_vec[call_index])();
} else
error = ENOSYS;
} else
error = ENOSYS;
2012-02-13 16:28:04 +01:00
/* Copy the results back to the user and send reply. */
if (error != SUSPEND) reply(&job_m_out, fp->fp_endpoint, error);
2005-04-21 16:53:53 +02:00
}
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/*===========================================================================*
* sef_local_startup *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
static void sef_local_startup()
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
{
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/* Register init callbacks. */
sef_setcb_init_fresh(sef_cb_init_fresh);
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
sef_setcb_init_restart(sef_cb_init_fail);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* No live update support for now. */
/* Let SEF perform startup. */
sef_startup();
}
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/*===========================================================================*
* sef_cb_init_fresh *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
static int sef_cb_init_fresh(int UNUSED(type), sef_init_info_t *info)
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
{
/* Initialize the virtual file server. */
int s, i;
2012-02-13 16:28:04 +01:00
struct fproc *rfp;
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
message mess;
struct rprocpub rprocpub[NR_BOOT_PROCS];
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
2012-02-13 16:28:04 +01:00
receive_from = ANY;
self = NULL;
2012-03-30 11:24:44 +02:00
verbose = 0;
2012-02-13 16:28:04 +01:00
/* Initialize proc endpoints to NONE */
for (rfp = &fproc[0]; rfp < &fproc[NR_PROCS]; rfp++) {
rfp->fp_endpoint = NONE;
rfp->fp_pid = PID_FREE;
}
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
2012-02-13 16:28:04 +01:00
/* Initialize the process table with help of the process manager messages.
* Expect one message for each system process with its slot number and pid.
* When no more processes follow, the magic process number NONE is sent.
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
* Then, stop and synchronize with the PM.
*/
do {
2012-02-13 16:28:04 +01:00
if ((s = sef_receive(PM_PROC_NR, &mess)) != OK)
panic("VFS: couldn't receive from PM: %d", s);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
if (mess.m_type != VFS_PM_INIT)
panic("unexpected message from PM: %d", mess.m_type);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
if (NONE == mess.VFS_PM_ENDPT) break;
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
rfp = &fproc[mess.VFS_PM_SLOT];
2012-02-13 16:28:04 +01:00
rfp->fp_flags = FP_NOFLAGS;
rfp->fp_pid = mess.VFS_PM_PID;
rfp->fp_endpoint = mess.VFS_PM_ENDPT;
2012-02-13 16:28:04 +01:00
rfp->fp_grant = GRANT_INVALID;
rfp->fp_blocked_on = FP_BLOCKED_ON_NONE;
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
rfp->fp_realuid = (uid_t) SYS_UID;
rfp->fp_effuid = (uid_t) SYS_UID;
rfp->fp_realgid = (gid_t) SYS_GID;
rfp->fp_effgid = (gid_t) SYS_GID;
rfp->fp_umask = ~0;
} while (TRUE); /* continue until process NONE */
mess.m_type = OK; /* tell PM that we succeeded */
s = ipc_send(PM_PROC_NR, &mess); /* send synchronization message */
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
2012-02-13 16:28:04 +01:00
system_hz = sys_hz();
/* Subscribe to block and character driver events. */
s = ds_subscribe("drv\\.[bc]..\\..*", DSF_INITIAL | DSF_OVERWRITE);
if (s != OK) panic("VFS: can't subscribe to driver events (%d)", s);
/* Initialize worker threads */
worker_init();
/* Initialize global locks */
if (mthread_mutex_init(&bsf_lock, NULL) != 0)
panic("VFS: couldn't initialize block special file lock");
init_dmap(); /* Initialize device table. */
/* Map all the services in the boot image. */
2012-02-13 16:28:04 +01:00
if ((s = sys_safecopyfrom(RS_PROC_NR, info->rproctab_gid, 0,
(vir_bytes) rprocpub, sizeof(rprocpub))) != OK){
panic("sys_safecopyfrom failed: %d", s);
}
2012-02-13 16:28:04 +01:00
for (i = 0; i < NR_BOOT_PROCS; i++) {
if (rprocpub[i].in_use) {
if ((s = map_service(&rprocpub[i])) != OK) {
panic("VFS: unable to map service: %d", s);
}
}
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Initialize locks and initial values for all processes. */
2012-02-13 16:28:04 +01:00
for (rfp = &fproc[0]; rfp < &fproc[NR_PROCS]; rfp++) {
if (mutex_init(&rfp->fp_lock, NULL) != 0)
panic("unable to initialize fproc lock");
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
rfp->fp_worker = NULL;
2012-02-13 16:28:04 +01:00
#if LOCK_DEBUG
rfp->fp_vp_rdlocks = 0;
rfp->fp_vmnt_rdlocks = 0;
#endif
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Initialize process directories. mount_fs will set them to the
* correct values.
*/
for (i = 0; i < OPEN_MAX; i++)
rfp->fp_filp[i] = NULL;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
rfp->fp_rd = NULL;
rfp->fp_wd = NULL;
2012-02-13 16:28:04 +01:00
}
init_vnodes(); /* init vnodes */
init_vmnts(); /* init vmnt structures */
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
init_select(); /* init select() structures */
2012-02-13 16:28:04 +01:00
init_filps(); /* Init filp structures */
mount_pfs(); /* mount Pipe File Server */
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Mount initial ramdisk as file system root. */
receive_from = MFS_PROC_NR;
worker_start(fproc_addr(VFS_PROC_NR), do_init_root, &mess /*unused*/,
FALSE /*use_spare*/);
2012-02-13 16:28:04 +01:00
return(OK);
}
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
2012-02-13 16:28:04 +01:00
/*===========================================================================*
* do_init_root *
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void do_init_root(void)
2012-02-13 16:28:04 +01:00
{
int r;
char *mount_type = "mfs"; /* FIXME: use boot image process name instead */
2012-02-13 16:28:04 +01:00
char *mount_label = "fs_imgrd"; /* FIXME: obtain this from RS */
r = mount_fs(DEV_IMGRD, "bootramdisk", "/", MFS_PROC_NR, 0, mount_type,
mount_label);
if (r != OK)
2012-02-13 16:28:04 +01:00
panic("Failed to initialize root");
receive_from = ANY;
}
/*===========================================================================*
* lock_proc *
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
void lock_proc(struct fproc *rfp)
2012-02-13 16:28:04 +01:00
{
int r;
struct worker_thread *org_self;
r = mutex_trylock(&rfp->fp_lock);
if (r == 0) return;
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
org_self = worker_suspend();
2012-02-13 16:28:04 +01:00
if ((r = mutex_lock(&rfp->fp_lock)) != 0)
panic("unable to lock fproc lock: %d", r);
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
worker_resume(org_self);
2012-02-13 16:28:04 +01:00
}
/*===========================================================================*
* unlock_proc *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void unlock_proc(struct fproc *rfp)
2012-02-13 16:28:04 +01:00
{
int r;
if ((r = mutex_unlock(&rfp->fp_lock)) != 0)
panic("Failed to unlock: %d", r);
}
/*===========================================================================*
* thread_cleanup *
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
void thread_cleanup(void)
2012-02-13 16:28:04 +01:00
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Perform cleanup actions for a worker thread. */
2012-02-13 16:28:04 +01:00
#if LOCK_DEBUG
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
check_filp_locks_by_me();
check_vnode_locks_by_me(fp);
check_vmnt_locks_by_me(fp);
2012-02-13 16:28:04 +01:00
#endif
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
if (fp->fp_flags & FP_SRV_PROC) {
struct vmnt *vmp;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
if ((vmp = find_vmnt(fp->fp_endpoint)) != NULL) {
vmp->m_flags &= ~VMNT_CALLBACK;
}
}
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
}
2005-04-21 16:53:53 +02:00
/*===========================================================================*
* get_work *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
static void get_work()
2012-02-13 16:28:04 +01:00
{
2005-04-21 16:53:53 +02:00
/* Normally wait for new input. However, if 'reviving' is
* nonzero, a suspended process must be awakened.
*/
2012-02-13 16:28:04 +01:00
int r, found_one, proc_p;
2005-04-21 16:53:53 +02:00
register struct fproc *rp;
2007-08-07 14:52:47 +02:00
while (reviving != 0) {
2012-02-13 16:28:04 +01:00
found_one = FALSE;
/* Find a suspended process. */
for (rp = &fproc[0]; rp < &fproc[NR_PROCS]; rp++)
if (rp->fp_pid != PID_FREE && (rp->fp_flags & FP_REVIVED)) {
found_one = TRUE; /* Found a suspended process */
if (unblock(rp))
return; /* So main loop can process job */
send_work();
2005-04-21 16:53:53 +02:00
}
2012-02-13 16:28:04 +01:00
if (!found_one) /* Consistency error */
panic("VFS: get_work couldn't revive anyone");
2005-04-21 16:53:53 +02:00
}
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
for(;;) {
2012-02-13 16:28:04 +01:00
/* Normal case. No one to revive. Get a useful request. */
if ((r = sef_receive(receive_from, &m_in)) != OK) {
panic("VFS: sef_receive error: %d", r);
}
2012-02-13 16:28:04 +01:00
proc_p = _ENDPOINT_P(m_in.m_source);
2012-07-17 12:29:22 +02:00
if (proc_p < 0 || proc_p >= NR_PROCS) fp = NULL;
2012-02-13 16:28:04 +01:00
else fp = &fproc[proc_p];
if (m_in.m_type == EDEADSRCDST) {
printf("VFS: failed ipc_sendrec\n");
return; /* Failed 'ipc_sendrec' */
}
2012-02-13 16:28:04 +01:00
/* Negative who_p is never used to access the fproc array. Negative
* numbers (kernel tasks) are treated in a special way.
*/
if (fp && fp->fp_endpoint == NONE) {
printf("VFS: ignoring request from %d: NONE endpoint %d (%d)\n",
2012-02-13 16:28:04 +01:00
m_in.m_source, who_p, m_in.m_type);
continue;
}
/* Internal consistency check; our mental image of process numbers and
* endpoints must match with how the rest of the system thinks of them.
*/
if (fp && fp->fp_endpoint != who_e) {
2012-02-13 16:28:04 +01:00
if (fproc[who_p].fp_endpoint == NONE)
printf("slot unknown even\n");
panic("VFS: receive endpoint inconsistent (source %d, who_p "
2012-02-13 16:28:04 +01:00
"%d, stored ep %d, who_e %d).\n", m_in.m_source, who_p,
fproc[who_p].fp_endpoint, who_e);
}
return;
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
}
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
* reply *
*===========================================================================*/
static void reply(message *m_out, endpoint_t whom, int result)
2005-04-21 16:53:53 +02:00
{
2006-03-10 17:10:05 +01:00
/* Send a reply to a user process. If the send fails, just ignore it. */
2012-02-13 16:28:04 +01:00
int r;
2007-08-07 14:52:47 +02:00
m_out->m_type = result;
r = ipc_sendnb(whom, m_out);
if (r != OK) {
printf("VFS: %d couldn't send reply %d to %d: %d\n", mthread_self(),
result, whom, r);
util_stacktrace();
}
}
/*===========================================================================*
* replycode *
*===========================================================================*/
void replycode(endpoint_t whom, int result)
{
/* Send a reply to a user process. If the send fails, just ignore it. */
message m_out;
memset(&m_out, 0, sizeof(m_out));
reply(&m_out, whom, result);
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
2012-02-13 16:28:04 +01:00
* service_pm_postponed *
2005-04-21 16:53:53 +02:00
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
void service_pm_postponed(void)
2005-04-21 16:53:53 +02:00
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
int r, term_signal;
vir_bytes core_path;
vir_bytes exec_path, stack_frame, pc, newsp, ps_str;
size_t exec_path_len, stack_frame_len;
endpoint_t proc_e;
message m_out;
memset(&m_out, 0, sizeof(m_out));
2005-04-21 16:53:53 +02:00
switch(job_call_nr) {
case VFS_PM_EXEC:
proc_e = job_m_in.VFS_PM_ENDPT;
exec_path = (vir_bytes) job_m_in.VFS_PM_PATH;
exec_path_len = (size_t) job_m_in.VFS_PM_PATH_LEN;
stack_frame = (vir_bytes) job_m_in.VFS_PM_FRAME;
stack_frame_len = (size_t) job_m_in.VFS_PM_FRAME_LEN;
ps_str = (vir_bytes) job_m_in.VFS_PM_PS_STR;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
assert(proc_e == fp->fp_endpoint);
r = pm_exec(exec_path, exec_path_len, stack_frame, stack_frame_len,
&pc, &newsp, &ps_str);
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Reply status to PM */
m_out.m_type = VFS_PM_EXEC_REPLY;
m_out.VFS_PM_ENDPT = proc_e;
m_out.VFS_PM_PC = (void *) pc;
m_out.VFS_PM_STATUS = r;
m_out.VFS_PM_NEWSP = (void *) newsp;
m_out.VFS_PM_NEWPS_STR = ps_str;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
2012-02-13 16:28:04 +01:00
break;
case VFS_PM_EXIT:
proc_e = job_m_in.VFS_PM_ENDPT;
2012-02-13 16:28:04 +01:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
assert(proc_e == fp->fp_endpoint);
pm_exit();
/* Reply dummy status to PM for synchronization */
m_out.m_type = VFS_PM_EXIT_REPLY;
m_out.VFS_PM_ENDPT = proc_e;
2012-02-13 16:28:04 +01:00
break;
case VFS_PM_DUMPCORE:
proc_e = job_m_in.VFS_PM_ENDPT;
term_signal = job_m_in.VFS_PM_TERM_SIG;
core_path = (vir_bytes) job_m_in.VFS_PM_PATH;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
assert(proc_e == fp->fp_endpoint);
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
r = pm_dumpcore(term_signal, core_path);
/* Reply status to PM */
m_out.m_type = VFS_PM_CORE_REPLY;
m_out.VFS_PM_ENDPT = proc_e;
m_out.VFS_PM_STATUS = r;
2012-02-13 16:28:04 +01:00
break;
case VFS_PM_UNPAUSE:
proc_e = job_m_in.VFS_PM_ENDPT;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
assert(proc_e == fp->fp_endpoint);
unpause();
m_out.m_type = VFS_PM_UNPAUSE_REPLY;
m_out.VFS_PM_ENDPT = proc_e;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
break;
default:
panic("Unhandled postponed PM call %d", job_m_in.m_type);
}
2012-02-13 16:28:04 +01:00
r = ipc_send(PM_PROC_NR, &m_out);
2012-02-13 16:28:04 +01:00
if (r != OK)
panic("service_pm_postponed: ipc_send failed: %d", r);
2005-04-21 16:53:53 +02:00
}
2006-05-11 16:57:23 +02:00
/*===========================================================================*
* service_pm *
*===========================================================================*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
static void service_pm(void)
2006-05-11 16:57:23 +02:00
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Process a request from PM. This function is called from the main thread, and
* may therefore not block. Any requests that may require blocking the calling
* thread must be executed in a separate thread. Aside from VFS_PM_REBOOT, all
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
* requests from PM involve another, target process: for example, PM tells VFS
* that a process is performing a setuid() call. For some requests however,
* that other process may not be idle, and in that case VFS must serialize the
* PM request handling with any operation is it handling for that target
* process. As it happens, the requests that may require blocking are also the
* ones where the target process may not be idle. For both these reasons, such
* requests are run in worker threads associated to the target process.
*/
struct fproc *rfp;
2012-02-13 16:28:04 +01:00
int r, slot;
message m_out;
memset(&m_out, 0, sizeof(m_out));
2006-05-11 16:57:23 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
switch (call_nr) {
case VFS_PM_SETUID:
{
endpoint_t proc_e;
uid_t euid, ruid;
proc_e = m_in.VFS_PM_ENDPT;
euid = m_in.VFS_PM_EID;
ruid = m_in.VFS_PM_RID;
2006-05-11 16:57:23 +02:00
pm_setuid(proc_e, euid, ruid);
2006-05-11 16:57:23 +02:00
m_out.m_type = VFS_PM_SETUID_REPLY;
m_out.VFS_PM_ENDPT = proc_e;
}
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
break;
2006-05-11 16:57:23 +02:00
case VFS_PM_SETGID:
{
endpoint_t proc_e;
gid_t egid, rgid;
proc_e = m_in.VFS_PM_ENDPT;
egid = m_in.VFS_PM_EID;
rgid = m_in.VFS_PM_RID;
2006-05-11 16:57:23 +02:00
pm_setgid(proc_e, egid, rgid);
2006-05-11 16:57:23 +02:00
m_out.m_type = VFS_PM_SETGID_REPLY;
m_out.VFS_PM_ENDPT = proc_e;
}
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
break;
2006-05-11 16:57:23 +02:00
case VFS_PM_SETSID:
{
endpoint_t proc_e;
2006-05-11 16:57:23 +02:00
proc_e = m_in.VFS_PM_ENDPT;
pm_setsid(proc_e);
2006-05-11 16:57:23 +02:00
m_out.m_type = VFS_PM_SETSID_REPLY;
m_out.VFS_PM_ENDPT = proc_e;
}
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
break;
2006-05-11 16:57:23 +02:00
case VFS_PM_EXEC:
case VFS_PM_EXIT:
case VFS_PM_DUMPCORE:
case VFS_PM_UNPAUSE:
{
endpoint_t proc_e = m_in.VFS_PM_ENDPT;
if(isokendpt(proc_e, &slot) != OK) {
printf("VFS: proc ep %d not ok\n", proc_e);
return;
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
rfp = &fproc[slot];
2006-05-11 16:57:23 +02:00
/* PM requests on behalf of a proc are handled after the
* system call that might be in progress for that proc has
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
* finished. If the proc is not busy, we start a new thread.
*/
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
worker_start(rfp, NULL, &m_in, FALSE /*use_spare*/);
2006-05-11 16:57:23 +02:00
return;
}
case VFS_PM_FORK:
case VFS_PM_SRV_FORK:
{
endpoint_t pproc_e, proc_e;
pid_t child_pid;
uid_t reuid;
gid_t regid;
pproc_e = m_in.VFS_PM_PENDPT;
proc_e = m_in.VFS_PM_ENDPT;
child_pid = m_in.VFS_PM_CPID;
reuid = m_in.VFS_PM_REUID;
regid = m_in.VFS_PM_REGID;
pm_fork(pproc_e, proc_e, child_pid);
m_out.m_type = VFS_PM_FORK_REPLY;
if (call_nr == VFS_PM_SRV_FORK) {
m_out.m_type = VFS_PM_SRV_FORK_REPLY;
pm_setuid(proc_e, reuid, reuid);
pm_setgid(proc_e, regid, regid);
}
m_out.VFS_PM_ENDPT = proc_e;
}
break;
case VFS_PM_SETGROUPS:
{
endpoint_t proc_e;
int group_no;
gid_t *group_addr;
proc_e = m_in.VFS_PM_ENDPT;
group_no = m_in.VFS_PM_GROUP_NO;
group_addr = (gid_t *) m_in.VFS_PM_GROUP_ADDR;
pm_setgroups(proc_e, group_no, group_addr);
m_out.m_type = VFS_PM_SETGROUPS_REPLY;
m_out.VFS_PM_ENDPT = proc_e;
}
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
break;
case VFS_PM_REBOOT:
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Reboot requests are not considered postponed PM work and are instead
* handled from a separate worker thread that is associated with PM's
* process. PM makes no regular VFS calls, and thus, from VFS's
* perspective, PM is always idle. Therefore, we can safely do this.
* We do assume that PM sends us only one VFS_PM_REBOOT message at
* once, or ever for that matter. :)
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
*/
worker_start(fproc_addr(PM_PROC_NR), pm_reboot, &m_in,
FALSE /*use_spare*/);
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
return;
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
2012-02-13 16:28:04 +01:00
default:
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
printf("VFS: don't know how to handle PM request %d\n", call_nr);
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
return;
}
r = ipc_send(PM_PROC_NR, &m_out);
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
if (r != OK)
panic("service_pm: ipc_send failed: %d", r);
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
}
2012-02-13 16:28:04 +01:00
/*===========================================================================*
* unblock *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
static int unblock(rfp)
2012-02-13 16:28:04 +01:00
struct fproc *rfp;
{
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Unblock a process that was previously blocked on a pipe or a lock. This is
* done by reconstructing the original request and continuing/repeating it.
* This function returns TRUE when it has restored a request for execution, and
* FALSE if the caller should continue looking for work to do.
*/
2012-02-13 16:28:04 +01:00
int blocked_on;
blocked_on = rfp->fp_blocked_on;
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Reconstruct the original request from the saved data. */
memset(&m_in, 0, sizeof(m_in));
m_in.m_source = rfp->fp_endpoint;
2012-02-13 16:28:04 +01:00
m_in.m_type = rfp->fp_block_callnr;
switch (m_in.m_type) {
case VFS_READ:
case VFS_WRITE:
assert(blocked_on == FP_BLOCKED_ON_PIPE);
m_in.VFS_READWRITE_FD = scratch(rfp).file.fd_nr;
m_in.VFS_READWRITE_BUF = scratch(rfp).io.io_buffer;
m_in.VFS_READWRITE_LEN = scratch(rfp).io.io_nbytes;
break;
case VFS_FCNTL:
assert(blocked_on == FP_BLOCKED_ON_LOCK);
m_in.VFS_FCNTL_FD = scratch(rfp).file.fd_nr;
m_in.VFS_FCNTL_CMD = scratch(rfp).io.io_nbytes;
m_in.VFS_FCNTL_ARG_PTR = scratch(rfp).io.io_buffer;
assert(m_in.VFS_FCNTL_CMD == F_SETLKW);
break;
default:
panic("unblocking call %d blocked on %d ??", m_in.m_type, blocked_on);
}
2012-02-13 16:28:04 +01:00
rfp->fp_blocked_on = FP_BLOCKED_ON_NONE; /* no longer blocked */
rfp->fp_flags &= ~FP_REVIVED;
reviving--;
assert(reviving >= 0);
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* This should not be device I/O. If it is, it'll 'leak' grants. */
2012-02-13 16:28:04 +01:00
assert(!GRANT_VALID(rfp->fp_grant));
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* Pending pipe reads/writes cannot be repeated as is, and thus require a
* special resumption procedure.
*/
2012-02-13 16:28:04 +01:00
if (blocked_on == FP_BLOCKED_ON_PIPE) {
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
worker_start(rfp, do_pending_pipe, &m_in, FALSE /*use_spare*/);
return(FALSE); /* Retrieve more work */
2012-02-13 16:28:04 +01:00
}
VFS: worker thread model overhaul The main purpose of this patch is to fix handling of unpause calls from PM while another call is ongoing. The solution to this problem sparked a full revision of the threading model, consisting of a large number of related changes: - all active worker threads are now always associated with a process, and every process has at most one active thread working for it; - the process lock is always held by a process's worker thread; - a process can now have both normal work and postponed PM work associated to it; - timer expiry and non-postponed PM work is done from the main thread; - filp garbage collection is done from a thread associated with VFS; - reboot calls from PM are now done from a thread associated with PM; - the DS events handler is protected from starting multiple threads; - support for a system worker thread has been removed; - the deadlock recovery thread has been replaced by a parameter to the worker_start() function; the number of worker threads has consequently been increased by one; - saving and restoring of global but per-thread variables is now centralized in worker_suspend() and worker_resume(); err_code is now saved and restored in all cases; - the concept of jobs has been removed, and job_m_in now points to a message stored in the worker thread structure instead; - the PM lock has been removed; - the separate exec lock has been replaced by a lock on the VM process, which was already being locked for exec calls anyway; - PM_UNPAUSE is now processed as a postponed PM request, from a thread associated with the target process; - the FP_DROP_WORK flag has been removed, since it is no longer more than just an optimization and only applied to processes operating on a pipe when getting killed; - assignment to "fp" now takes place only when obtaining new work in the main thread or a worker thread, when resuming execution of a thread, and in the special case of exiting processes during reboot; - there are no longer special cases where the yield() call is used to force a thread to run. Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2013-08-30 14:00:50 +02:00
/* A lock request. Repeat the original request as though it just came in. */
fp = rfp;
return(TRUE); /* We've unblocked a process */
2012-02-13 16:28:04 +01:00
}