minix/drivers/lance/lance.h

210 lines
8.2 KiB
C
Raw Normal View History

#include <net/gen/ether.h>
#include <net/gen/eth_io.h>
/* PCI STUFF */
#define PCI_BASE_ADDRESS_0 0x10
#define PCI_BASE_ADDRESS_1 0x14
#define PCI_BASE_ADDRESS_2 0x18
#define PCI_BASE_ADDRESS_3 0x1c
#define PCI_BASE_ADDRESS_4 0x20
#define PCI_BASE_ADDRESS_5 0x24
#define PCI_BASE_ADDRESS_IO_MASK (~0x03)
#define PCI_BASE_ADDRESS_SPACE_IO 0x01
#define PCI_INTERRUPT_LINE 0x3c
#define PCI_INTERRUPT_PIN 0x3d
#define PCI_COMMAND_MASTER 0x4
#define PCI_VENDOR_ID_AMD 0x1022
#define PCI_DEVICE_ID_AMD_LANCE 0x2000
/* macros for 'mode' */
#define EC_DISABLED 0x0
#define EC_SINK 0x1
#define EC_ENABLED 0x2
/* macros for 'flags' */
#define ECF_EMPTY 0x000
#define ECF_PACK_SEND 0x001
#define ECF_PACK_RECV 0x002
#define ECF_SEND_AVAIL 0x004
#define ECF_READING 0x010
#define ECF_PROMISC 0x040
#define ECF_MULTI 0x080
#define ECF_BROAD 0x100
#define ECF_ENABLED 0x200
#define ECF_STOPPED 0x400
/* === macros for ether cards (our generalized version) === */
#define EC_ISR_RINT 0x0001
#define EC_ISR_WINT 0x0002
#define EC_ISR_RERR 0x0010
#define EC_ISR_WERR 0x0020
#define EC_ISR_ERR 0x0040
#define EC_ISR_RST 0x0100
/* IOVEC */
#define IOVEC_NR 16
typedef struct iovec_dat
{
2006-07-10 14:43:38 +02:00
iovec_s_t iod_iovec[IOVEC_NR];
int iod_iovec_s;
int iod_proc_nr;
2006-07-10 14:43:38 +02:00
cp_grant_id_t iod_grant;
vir_bytes iod_iovec_offset;
} iovec_dat_t;
/* ====== ethernet card info. ====== */
typedef struct ether_card
{
/* ####### MINIX style ####### */
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
char port_name[sizeof("lance#n")];
int flags;
int mode;
int transfer_mode;
eth_stat_t eth_stat;
iovec_dat_t read_iovec;
iovec_dat_t write_iovec;
iovec_dat_t tmp_iovec;
vir_bytes write_s;
vir_bytes read_s;
int client;
message sendmsg;
/* ######## device info. ####### */
port_t ec_port;
phys_bytes ec_linmem;
int ec_irq;
int ec_int_pending;
int ec_hook;
int ec_ramsize;
/* PCI */
u8_t ec_pcibus;
u8_t ec_pcidev;
u8_t ec_pcifunc;
/* Addrassing */
u16_t ec_memseg;
vir_bytes ec_memoff;
ether_addr_t mac_address;
} ether_card_t;
#define DEI_DEFAULT 0x8000
2009-07-22 14:36:19 +02:00
/*
* NOTE: Not all the CSRs are defined. Just the ones that were deemed
* necessary or potentially useful.
*/
/* Control and Status Register Addresses */
#define LANCE_CSR0 0 /* Controller Status Register */
#define LANCE_CSR1 1 /* Initialization Block Address (Lower) */
#define LANCE_CSR2 2 /* Initialization Block Address (Upper) */
#define LANCE_CSR3 3 /* Interrupt Masks and Deferral Control */
#define LANCE_CSR4 4 /* Test and Features Control */
#define LANCE_CSR5 5 /* Extended Control and Interrupt */
#define LANCE_CSR8 8 /* Logical Address Filter 0 */
#define LANCE_CSR9 9 /* Logical Address Filter 1 */
#define LANCE_CSR10 10 /* Logical Address Filter 2 */
#define LANCE_CSR11 11 /* Logical Address Filter 3 */
#define LANCE_CSR15 15 /* Mode */
#define LANCE_CSR88 88 /* Chip ID Register (Lower) */
#define LANCE_CSR89 89 /* Chip ID Register (Upper) */
/* Control and Status Register 0 (CSR0) */
#define LANCE_CSR0_ERR 0x8000 /* Error Occurred */
#define LANCE_CSR0_BABL 0x4000 /* Transmitter Timeout Error */
#define LANCE_CSR0_CERR 0x2000 /* Collision Error */
#define LANCE_CSR0_MISS 0x1000 /* Missed Frame */
#define LANCE_CSR0_MERR 0x0800 /* Memory Error */
#define LANCE_CSR0_RINT 0x0400 /* Receive Interrupt */
#define LANCE_CSR0_TINT 0x0200 /* Transmit Interrupt */
#define LANCE_CSR0_IDON 0x0100 /* Initialization Done */
#define LANCE_CSR0_INTR 0x0080 /* Interrupt Flag */
#define LANCE_CSR0_IENA 0x0040 /* Interrupt Enable */
#define LANCE_CSR0_RXON 0x0020 /* Receive On */
#define LANCE_CSR0_TXON 0x0010 /* Transmit On */
#define LANCE_CSR0_TDMD 0x0008 /* Transmit Demand */
#define LANCE_CSR0_STOP 0x0004 /* Stop */
#define LANCE_CSR0_STRT 0x0002 /* Start */
#define LANCE_CSR0_INIT 0x0001 /* Init */
/* Control and Status Register 3 (CSR3) */
/* 0x8000 Reserved */
#define LANCE_CSR3_BABLM 0x4000 /* Babble Mask */
/* 0x2000 Reserved */
#define LANCE_CSR3_MISSM 0x1000 /* Missed Frame Mask */
#define LANCE_CSR3_MERRM 0x0800 /* Memory Error Mask */
#define LANCE_CSR3_RINTM 0x0400 /* Receive Interrupt Mask */
#define LANCE_CSR3_TINTM 0x0200 /* Transmit Interrupt Mask */
#define LANCE_CSR3_IDONM 0x0100 /* Initialization Done Mask */
/* 0x0080 Reserved */
#define LANCE_CSR3_DXSUFLO 0x0040 /* Disable Transmit Stop on Underflow */
#define LANCE_CSR3_LAPPEN 0x0020 /* Look Ahead Packet Processing Enable */
#define LANCE_CSR3_DXMT2PD 0x0010 /* Disable Transmit Two Part Deferral */
#define LANCE_CSR3_EMBA 0x0008 /* Enable Modified Back-off Algorithm */
#define LANCE_CSR3_BSWP 0x0004 /* Byte Swap */
/* 0x0002 Reserved
* 0x0001 Reserved */
/* Control and Status Register 4 (CSR4) */
#define LANCE_CSR4_EN124 0x8000 /* Enable CSR124 Access */
#define LANCE_CSR4_DMAPLUS 0x4000 /* Disable DMA Burst Transfer Counter */
#define LANCE_CSR4_TIMER 0x2000 /* Enable Bus Activity Timer */
#define LANCE_CSR4_DPOLL 0x1000 /* Disable Transmit Polling */
#define LANCE_CSR4_APAD_XMT 0x0800 /* Auto Pad Transmit */
#define LANCE_CSR4_ASTRP_RCV 0x0400 /* Auto Strip Receive */
#define LANCE_CSR4_MFCO 0x0200 /* Missed Frame Counter Overflow */
#define LANCE_CSR4_MFCOM 0x0100 /* Missed Frame Counter Overflow Mask */
#define LANCE_CSR4_UINTCMD 0x0080 /* User Interrupt Command */
#define LANCE_CSR4_UINT 0x0040 /* User Interrupt */
#define LANCE_CSR4_RCVCCO 0x0020 /* Receive Collision Counter Overflow */
#define LANCE_CSR4_RCVCCOM 0x0010 /* Receive Collision Counter Overflow
* Mask */
#define LANCE_CSR4_TXSTRT 0x0008 /* Transmit Start */
#define LANCE_CSR4_TXSTRTM 0x0004 /* Transmit Start Mask */
#define LANCE_CSR4_JAB 0x0002 /* Jabber Error */
#define LANCE_CSR4_JABM 0x0001 /* Jabber Error Mask */
/* Control and Status Register 5 (CSR5) */
#define LANCE_CSR5_TOKINTD 0x8000 /* Transmit OK Interrupt Disable */
#define LANCE_CSR5_LINTEN 0x4000 /* Last Transmit Interrupt Enable */
/* 0x2000 Reserved
* 0x1000 Reserved */
#define LANCE_CSR5_SINT 0x0800 /* System Interrupt */
#define LANCE_CSR5_SINTE 0x0400 /* System Interrupt Enable */
#define LANCE_CSR5_SLPINT 0x0200 /* Sleep Interrupt */
#define LANCE_CSR5_SLPINTE 0x0100 /* Sleep Interrupt Enable */
#define LANCE_CSR5_EXDINT 0x0080 /* Excessive Deferral Interrupt */
#define LANCE_CSR5_EXDINTE 0x0040 /* Excessive Deferral Interrupt Enable */
#define LANCE_CSR5_MPPLBA 0x0020 /* Magic Packet Physical Logical Broadcast
* Accept */
#define LANCE_CSR5_MPINT 0x0010 /* Magic Packet Interrupt */
#define LANCE_CSR5_MPINTE 0x0008 /* Magic Packet Interrupt Enable */
#define LANCE_CSR5_MPEN 0x0004 /* Magic Packet Enable */
#define LANCE_CSR5_MPMODE 0x0002 /* Magic Packet Mode */
#define LANCE_CSR5_SPND 0x0001 /* Suspend */
/* Control and Status Register 15 (CSR15) */
#define LANCE_CSR15_PROM 0x8000 /* Promiscuous Mode */
#define LANCE_CSR15_DRCVBC 0x4000 /* Disable Receive Broadcast */
#define LANCE_CSR15_DRCVPA 0x2000 /* Disable Receive Physical Address */
#define LANCE_CSR15_DLNKTST 0x1000 /* Disable Link Status */
#define LANCE_CSR15_DAPC 0x0800 /* Disable Automatic Polarity Correction */
#define LANCE_CSR15_MENDECL 0x0400 /* MENDEC Loopback Mode */
#define LANCE_CSR15_LRT 0x0200 /* Low Receive Threshold (T-MAU Mode) */
#define LANCE_CSR15_TSEL 0x0200 /* Transmit Mode Select (AUI Mode) */
/* 0x0100 Portsel[1]
* 0x0080 Portsel[0] */
#define LANCE_CSR15_INTL 0x0040 /* Internal Loopback */
#define LANCE_CSR15_DRTY 0x0020 /* Disable Retry */
#define LANCE_CSR15_FCOLL 0x0010 /* Force Collision */
#define LANCE_CSR15_DXMTFCS 0x0008 /* Disable Transmit CRC (FCS) */
#define LANCE_CSR15_LOOP 0x0004 /* Loopback Enable */
#define LANCE_CSR15_DTX 0x0002 /* Disable Transmit */
#define LANCE_CSR15_DRX 0x0001 /* Disable Receiver */