minix/releasetools/arm_sdimage.sh

#!/bin/bash
set -e
#set -x

: ${ARCH=evbearm-el}
: ${OBJ=../obj.${ARCH}}
: ${CROSS_TOOLS=${OBJ}/"tooldir.`uname -s`-`uname -r`-`uname -m`"/bin}
: ${CROSS_PREFIX=${CROSS_TOOLS}/arm-elf32-minix-}
: ${JOBS=1}
: ${DESTDIR=${OBJ}/destdir.$ARCH}
: ${FSTAB=${DESTDIR}/etc/fstab}
: ${BUILDVARS=}
: ${BUILDSH=build.sh}

#
# Directory where to store temporary file system images
#
: ${IMG_DIR=${OBJ}/img}
: ${IMG=minix_arm_sd.img}
: ${MLO=MLO}
: ${UBOOT=u-boot.img}

if [ ! -f ${BUILDSH} ]
then	echo "Please invoke me from the root source dir, where ${BUILDSH} is."
	exit 1
fi

export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:$PATH

for needed in sfdisk mcopy dd wget mkfs.vfat
do
	if ! which $needed 2>&1 > /dev/null
	then
		echo "**Skipping image creation: missing tool '$needed'"
		exit 1
	fi
done

#
# Artifacts from this script are stored in the IMG_DIR
#
mkdir -p $IMG_DIR

#
# Download the stage 1 bootloader  and u-boot
#
for i in ${MLO} ${UBOOT} 
do
	if [ ! -f ${IMG_DIR}/${i} ]
	then
		if ! wget -O ${IMG_DIR}/$i http://www.minix3.org/arm/beagleboard-xm/$i
		then
			echo "Failed to download $i"
			rm -f ${IMG_DIR}/$i
			exit 1
		fi
		
	fi
done

#
# Call build.sh using a sloppy file list so we don't need to remove the installed /etc/fstag
#
sh ${BUILDSH} -V SLOPPY_FLIST=yes -V MKBINUTILS=yes -V MKGCCCMDS=yes -j ${JOBS} -m ${ARCH} -O ${OBJ} -D ${DESTDIR} ${BUILDVARS} -U -u distribution

#
# This script creates a bootable image and should at some point in the future
# be replaced by makefs.
#
# All sized are written in 512 byte blocks
#
# we create a disk image of about 2 gig's
# 
# The size of the extended partition where we store 
# /root /home and /usr in separate sub partitions is
# about 1 gig
#
: ${IMG_SIZE=$((2**31 / 512))}
: ${FAT_SIZE=$((20480))}
: ${EXTENDED_SIZE=$((2**30 / 512))}
: ${ROOT_SIZE=$((2**26 / 512))}
: ${HOME_SIZE=$((2**27 / 512))}
: ${USR_SIZE=$((2**29 / 512))}

#
# create a fstab entry in /etc this is normally done during the
# setup phase on x86
#
cat >${FSTAB} <<END_FSTAB
/dev/c0d0p1s0   /       mfs     rw                      0       1
/dev/c0d0p1s1   /home   mfs     rw                      0       2
/dev/c0d0p1s2   /usr    mfs     rw                      0       2
END_FSTAB

rm -f ${DESTDIR}/SETS.*

${CROSS_TOOLS}/nbpwd_mkdb -V 0 -p -d ${DESTDIR} ${DESTDIR}/etc/master.passwd

#
# Now given the sizes above use DD to create separate files representing
# the partitions we are going to use.
#
dd if=/dev/zero of=${IMG_DIR}/fat.img bs=512 count=1 seek=$(($FAT_SIZE -1)) 2>/dev/null
dd if=/dev/zero of=${IMG_DIR}/root.img bs=512 count=1 seek=$(($ROOT_SIZE -1)) 2>/dev/null
dd if=/dev/zero of=${IMG_DIR}/home.img bs=512 count=1 seek=$(($HOME_SIZE -1)) 2>/dev/null
dd if=/dev/zero of=${IMG_DIR}/usr.img bs=512 count=1 seek=$(($USR_SIZE -1)) 2>/dev/null

#
# Create the empty image where we later will but the partitions in
#
dd if=/dev/zero of=${IMG} bs=512 count=1 seek=$(($IMG_SIZE -1))

#
# Do some math to determine the start addresses of the partitions.
#
FAT_START=2048
EXTENDED_START=$(($FAT_START + $FAT_SIZE))
EXTENDED_SIZE=$(($ROOT_SIZE + $HOME_SIZE + $USR_SIZE + 3))
ROOT_START=$(($EXTENDED_START + 1))
HOME_START=$(($ROOT_START + $ROOT_SIZE + 1))
USR_START=$(($HOME_START + $HOME_SIZE + 1))

#
# Generate the partitions using sfdisk to partition the
#
sfdisk --no-reread -q ${IMG} 1>/dev/null <<END_SFDISK
# partition table of test.img
unit: sectors

test.img1 : start=     $FAT_START, size=    $FAT_SIZE, Id= c, bootable
test.img2 : start=    $EXTENDED_START, size=  $EXTENDED_SIZE, Id= 5
test.img3 : start=        0, size=        0, Id= 0
test.img4 : start=        0, size=        0, Id= 0
test.img5 : start=    $ROOT_START, size=   $ROOT_SIZE, Id=81
test.img6 : start=   $HOME_START, size=   $HOME_SIZE, Id=81
test.img7 : start=   $USR_START, size=   $USR_SIZE, Id=81
END_SFDISK

#
# Format the fat partition and put the bootloaders
# uEnv and the kernel command line in the FAT partition
#
mkfs.vfat ${IMG_DIR}/fat.img

./releasetools/gen_uEnv.txt.sh > ${IMG_DIR}/uEnv.txt
echo "Copying configuration kernel and boot modules"
mcopy -bsp -i ${IMG_DIR}/fat.img  ${IMG_DIR}/$MLO ::MLO
mcopy -bsp -i ${IMG_DIR}/fat.img ${IMG_DIR}/$UBOOT ::u-boot.img
mcopy -bsp -i ${IMG_DIR}/fat.img ${IMG_DIR}/uEnv.txt ::uEnv.txt
mcopy -bsp -i ${IMG_DIR}/fat.img releasetools/cmdline.txt ::cmdline.txt

#
# For tftp booting
#
cp ${IMG_DIR}/uEnv.txt ${OBJ}/
cp releasetools/cmdline.txt ${OBJ}/

#
# Do some last processing of the kernel and servers before also putting
# them on the FAT
#
${CROSS_PREFIX}objcopy ${OBJ}/kernel/kernel -O binary ${OBJ}/kernel.bin

mcopy -bsp -i ${IMG_DIR}/fat.img ${OBJ}/kernel.bin ::kernel.bin

for f in vm rs pm sched vfs ds mfs pfs init
do
    cp ${OBJ}/servers/${f}/${f} ${OBJ}/${f}.elf
    ${CROSS_PREFIX}strip -s ${OBJ}/${f}.elf
    mcopy -bsp -i ${IMG_DIR}/fat.img  ${OBJ}/${f}.elf ::${f}.elf
done

for f in tty memory log
do
    cp ${OBJ}/drivers/${f}/${f} ${OBJ}/${f}.elf
    ${CROSS_PREFIX}strip -s ${OBJ}/${f}.elf
    mcopy -bsp -i ${IMG_DIR}/fat.img  ${OBJ}/${f}.elf ::${f}.elf
done

#
# make the different file system. this part is *also* hacky. We first convert
# the METALOG.sanitised using mtree into a input METALOG containing uids and
# gids.
# Afther that we do some magic processing to add device nodes (also missing from METALOG)
# and convert the METALOG into a proto file that can be used by mkfs.mfs
#
echo "creating the file systems"

#
# read METALOG and use mtree to conver the user and group names into uid and gids
# FIX put "input somwhere clean"
#
cat ${DESTDIR}/METALOG.sanitised | ${CROSS_TOOLS}/nbmtree -N ${DESTDIR}/etc -C > ${IMG_DIR}/input

# add fstab
echo "./etc/fstab type=file uid=0 gid=0 mode=0755 size=747 time=1365060731.000000000" >> ${IMG_DIR}/input

# fill root.img (skipping /usr entries while keeping the /usr directory)
cat ${IMG_DIR}/input  | grep -v "^./usr/" | ${CROSS_TOOLS}/nbtoproto -b ${DESTDIR} -o ${IMG_DIR}/root.in

#
# add device nodes somewhere in the middle of the proto file. Better would be to add the entries in the
# original METALOG
# grab the first part
grep -B 10000 "^ dev"  ${IMG_DIR}/root.in >  ${IMG_DIR}/root.proto
# add the device nodes from the ramdisk
cat  ${OBJ}/drivers/ramdisk/proto.dev >> ${IMG_DIR}/root.proto
# and add the rest of the file
grep -A 10000 "^ dev"  ${IMG_DIR}/root.in | tail -n +2    >>  ${IMG_DIR}/root.proto
rm ${IMG_DIR}/root.in

#
# Create proto files for /usr and /home using toproto.
#
cat ${IMG_DIR}/input  | grep  "^\./usr/\|^. "  | sed "s,\./usr,\.,g" | ${CROSS_TOOLS}/nbtoproto -b ${DESTDIR}/usr -o ${IMG_DIR}/usr.proto
cat ${IMG_DIR}/input  | grep  "^\./home/\|^. "  | sed "s,\./home,\.,g" | ${CROSS_TOOLS}/nbtoproto -b ${DESTDIR}/home -o ${IMG_DIR}/home.proto

#
# Generate /root, /usr and /home partition images.
#
${CROSS_TOOLS}/nbmkfs.mfs -b $((${ROOT_SIZE} / 8)) ${IMG_DIR}/root.img ${IMG_DIR}/root.proto
${CROSS_TOOLS}/nbmkfs.mfs -b $((${USR_SIZE} / 8))  ${IMG_DIR}/usr.img  ${IMG_DIR}/usr.proto
${CROSS_TOOLS}/nbmkfs.mfs -b $((${HOME_SIZE} / 8)) ${IMG_DIR}/home.img ${IMG_DIR}/home.proto

#
# Merge the partitions into a single image.
#
echo "Merging file systems"
dd if=${IMG_DIR}/fat.img of=${IMG} seek=$FAT_START conv=notrunc
dd if=${IMG_DIR}/root.img of=${IMG} seek=$ROOT_START conv=notrunc
dd if=${IMG_DIR}/home.img of=${IMG} seek=$HOME_START conv=notrunc
dd if=${IMG_DIR}/usr.img of=${IMG} seek=$USR_START conv=notrunc