2006-10-25 15:40:36 +02:00
|
|
|
/* This file contains the code for performing four system calls relating to
|
|
|
|
* status and directories.
|
|
|
|
*
|
|
|
|
* The entry points into this file are
|
|
|
|
* do_chdir: perform the CHDIR system call
|
|
|
|
* do_chroot: perform the CHROOT system call
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
* do_lstat: perform the LSTAT system call
|
2006-10-25 15:40:36 +02:00
|
|
|
* do_stat: perform the STAT system call
|
|
|
|
* do_fstat: perform the FSTAT system call
|
|
|
|
* do_fstatfs: perform the FSTATFS system call
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "fs.h"
|
|
|
|
#include <sys/stat.h>
|
|
|
|
#include <sys/statfs.h>
|
|
|
|
#include <minix/com.h>
|
2006-11-27 15:21:43 +01:00
|
|
|
#include <minix/u64.h>
|
2006-10-25 15:40:36 +02:00
|
|
|
#include <string.h>
|
|
|
|
#include "file.h"
|
|
|
|
#include "fproc.h"
|
|
|
|
#include "param.h"
|
|
|
|
#include <minix/vfsif.h>
|
|
|
|
#include "vnode.h"
|
|
|
|
#include "vmnt.h"
|
|
|
|
|
|
|
|
FORWARD _PROTOTYPE( int change, (struct vnode **iip, char *name_ptr, int len));
|
|
|
|
FORWARD _PROTOTYPE( int change_into, (struct vnode **iip, struct vnode *vp));
|
|
|
|
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
|
2006-10-25 15:40:36 +02:00
|
|
|
/*===========================================================================*
|
|
|
|
* do_fchdir *
|
|
|
|
*===========================================================================*/
|
|
|
|
PUBLIC int do_fchdir()
|
|
|
|
{
|
|
|
|
/* Change directory on already-opened fd. */
|
|
|
|
struct filp *rfilp;
|
2009-04-29 18:59:18 +02:00
|
|
|
|
2006-10-25 15:40:36 +02:00
|
|
|
/* Is the file descriptor valid? */
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
if ((rfilp = get_filp(m_in.fd)) == NIL_FILP) return(err_code);
|
2009-12-21 10:36:34 +01:00
|
|
|
dup_vnode(rfilp->filp_vno); /* Change into expects a reference. */
|
2006-10-25 15:40:36 +02:00
|
|
|
return change_into(&fp->fp_wd, rfilp->filp_vno);
|
|
|
|
}
|
|
|
|
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
|
2006-10-25 15:40:36 +02:00
|
|
|
/*===========================================================================*
|
|
|
|
* do_chdir *
|
|
|
|
*===========================================================================*/
|
|
|
|
PUBLIC int do_chdir()
|
|
|
|
{
|
2010-01-05 20:39:27 +01:00
|
|
|
/* Perform the chdir(name) system call. */
|
2006-10-25 15:40:36 +02:00
|
|
|
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
return change(&fp->fp_wd, m_in.name, m_in.name_length);
|
2006-10-25 15:40:36 +02:00
|
|
|
}
|
|
|
|
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
|
2006-10-25 15:40:36 +02:00
|
|
|
/*===========================================================================*
|
|
|
|
* do_chroot *
|
|
|
|
*===========================================================================*/
|
|
|
|
PUBLIC int do_chroot()
|
|
|
|
{
|
|
|
|
/* Perform the chroot(name) system call. */
|
|
|
|
|
|
|
|
if (!super_user) return(EPERM); /* only su may chroot() */
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
return change(&fp->fp_rd, m_in.name, m_in.name_length);
|
2006-10-25 15:40:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* change *
|
|
|
|
*===========================================================================*/
|
|
|
|
PRIVATE int change(iip, name_ptr, len)
|
|
|
|
struct vnode **iip; /* pointer to the inode pointer for the dir */
|
|
|
|
char *name_ptr; /* pointer to the directory name to change to */
|
|
|
|
int len; /* length of the directory name string */
|
|
|
|
{
|
|
|
|
/* Do the actual work for chdir() and chroot(). */
|
2007-01-05 17:36:55 +01:00
|
|
|
struct vnode *vp;
|
2006-10-25 15:40:36 +02:00
|
|
|
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
/* Try to open the directory */
|
2006-10-25 15:40:36 +02:00
|
|
|
if (fetch_name(name_ptr, len, M3) != OK) return(err_code);
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
if ((vp = eat_path(PATH_NOFLAGS)) == NIL_VNODE) return(err_code);
|
2006-10-25 15:40:36 +02:00
|
|
|
return change_into(iip, vp);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* change_into *
|
|
|
|
*===========================================================================*/
|
|
|
|
PRIVATE int change_into(iip, vp)
|
|
|
|
struct vnode **iip; /* pointer to the inode pointer for the dir */
|
|
|
|
struct vnode *vp; /* this is what the inode has to become */
|
|
|
|
{
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
int r;
|
|
|
|
|
|
|
|
/* It must be a directory and also be searchable */
|
|
|
|
if ((vp->v_mode & I_TYPE) != I_DIRECTORY)
|
|
|
|
r = ENOTDIR;
|
|
|
|
else
|
|
|
|
r = forbidden(vp, X_BIT); /* Check if dir is searchable*/
|
|
|
|
|
|
|
|
/* If error, return vnode */
|
|
|
|
if (r != OK) {
|
|
|
|
put_vnode(vp);
|
|
|
|
return(r);
|
|
|
|
}
|
|
|
|
|
2006-10-25 15:40:36 +02:00
|
|
|
/* Everything is OK. Make the change. */
|
|
|
|
put_vnode(*iip); /* release the old directory */
|
|
|
|
*iip = vp; /* acquire the new one */
|
|
|
|
return(OK);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* do_stat *
|
|
|
|
*===========================================================================*/
|
|
|
|
PUBLIC int do_stat()
|
|
|
|
{
|
|
|
|
/* Perform the stat(name, buf) system call. */
|
|
|
|
int r;
|
2007-08-07 14:52:47 +02:00
|
|
|
struct vnode *vp;
|
|
|
|
|
2006-10-25 15:40:36 +02:00
|
|
|
if (fetch_name(m_in.name1, m_in.name1_length, M1) != OK) return(err_code);
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
if ((vp = eat_path(PATH_NOFLAGS)) == NIL_VNODE) return(err_code);
|
|
|
|
r = req_stat(vp->v_fs_e, vp->v_inode_nr, who_e, m_in.name2, 0);
|
2006-10-25 15:40:36 +02:00
|
|
|
|
2007-08-07 14:52:47 +02:00
|
|
|
put_vnode(vp);
|
|
|
|
return r;
|
2006-10-25 15:40:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* do_fstat *
|
|
|
|
*===========================================================================*/
|
|
|
|
PUBLIC int do_fstat()
|
|
|
|
{
|
|
|
|
/* Perform the fstat(fd, buf) system call. */
|
|
|
|
register struct filp *rfilp;
|
|
|
|
int pipe_pos = 0;
|
|
|
|
|
|
|
|
/* Is the file descriptor valid? */
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
if ((rfilp = get_filp(m_in.fd)) == NIL_FILP) return(err_code);
|
2006-10-25 15:40:36 +02:00
|
|
|
|
|
|
|
/* If we read from a pipe, send position too */
|
|
|
|
if (rfilp->filp_vno->v_pipe == I_PIPE) {
|
|
|
|
if (rfilp->filp_mode & R_BIT)
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
if (ex64hi(rfilp->filp_pos) != 0) {
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("do_fstat: bad position in pipe");
|
2006-11-27 15:21:43 +01:00
|
|
|
}
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
pipe_pos = ex64lo(rfilp->filp_pos);
|
2006-10-25 15:40:36 +02:00
|
|
|
}
|
|
|
|
|
2007-01-05 17:36:55 +01:00
|
|
|
return req_stat(rfilp->filp_vno->v_fs_e, rfilp->filp_vno->v_inode_nr,
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
who_e, m_in.buffer, pipe_pos);
|
2006-10-25 15:40:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* do_fstatfs *
|
|
|
|
*===========================================================================*/
|
|
|
|
PUBLIC int do_fstatfs()
|
|
|
|
{
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
/* Perform the fstatfs(fd, buf) system call. */
|
|
|
|
struct filp *rfilp;
|
2006-10-25 15:40:36 +02:00
|
|
|
|
|
|
|
/* Is the file descriptor valid? */
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
if( (rfilp = get_filp(m_in.fd)) == NIL_FILP) return(err_code);
|
2006-10-25 15:40:36 +02:00
|
|
|
|
2007-08-17 13:20:59 +02:00
|
|
|
return req_fstatfs(rfilp->filp_vno->v_fs_e, who_e, m_in.buffer);
|
2006-10-25 15:40:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2007-08-07 14:52:47 +02:00
|
|
|
* do_lstat *
|
2006-10-25 15:40:36 +02:00
|
|
|
*===========================================================================*/
|
|
|
|
PUBLIC int do_lstat()
|
|
|
|
{
|
|
|
|
/* Perform the lstat(name, buf) system call. */
|
2007-08-07 14:52:47 +02:00
|
|
|
struct vnode *vp;
|
2006-10-25 15:40:36 +02:00
|
|
|
int r;
|
|
|
|
|
|
|
|
if (fetch_name(m_in.name1, m_in.name1_length, M1) != OK) return(err_code);
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
if ((vp = eat_path(PATH_RET_SYMLINK)) == NIL_VNODE) return(err_code);
|
|
|
|
r = req_stat(vp->v_fs_e, vp->v_inode_nr, who_e, m_in.name2, 0);
|
2007-08-07 14:52:47 +02:00
|
|
|
|
|
|
|
put_vnode(vp);
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
return(r);
|
2006-10-25 15:40:36 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|