minix/etc/system.conf

384 lines
4.3 KiB
Text
Raw Normal View History

service floppy
{
irq 6;
io 3f0:8
0:10 # XXX DMA controller
81 # Also DMA
;
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
VDEVIO # 23
;
};
service dp8390
{
system
IRQCTL # 19
DEVIO # 21
SDEVIO # 22
;
pci device 10ec/8029;
uid 0;
};
service dpeth
{
system
IRQCTL # 19
DEVIO # 21
SDEVIO # 22
;
uid 0;
};
service lance
2008-07-22 17:11:01 +02:00
{
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
;
pci device 1022/2000;
uid 0;
};
service rtl8139
{
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
;
pci device 10ec/8139;
pci device 02ac/1012;
pci device 1065/8139;
pci device 1113/1211;
pci device 1186/1300;
pci device 1186/1340;
pci device 11db/1234;
pci device 1259/a117;
pci device 1259/a11e;
pci device 126c/1211;
pci device 13d1/ab06;
pci device 1432/9130;
pci device 14ea/ab06;
pci device 14ea/ab07;
pci device 1500/1360;
pci device 1743/8139;
pci device 4033/1360;
ipc
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
SYSTEM PM RS LOG TTY DS VM
pci inet amddev
;
};
service fxp
{
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
;
2009-08-26 23:01:46 +02:00
pci device 8086/103d;
pci device 8086/1064;
pci device 8086/1229;
2009-08-26 23:01:46 +02:00
pci device 8086/2449;
ipc
IPC privileges fixes Kernel: o Remove s_ipc_sendrec, instead using s_ipc_to for all send primitives o Centralize s_ipc_to bit manipulation, - disallowing assignment of bits pointing to unused priv structs; - preventing send-to-self by not setting bit for own priv struct; - preserving send mask matrix symmetry in all cases o Add IPC send mask checks to SENDA, which were missing entirely somehow o Slightly improve IPC stats accounting for SENDA o Remove SYSTEM from user processes' send mask o Half-fix the dependency between boot image order and process numbers, - correcting the table order of the boot processes; - documenting the order requirement needed for proper send masks; - warning at boot time if the order is violated RS: o Add support in /etc/drivers.conf for servers that talk to user processes, - disallowing IPC to user processes if no "ipc" field is present - adding a special "USER" label to explicitly allow IPC to user processes o Always apply IPC masks when specified; remove -i flag from service(8) o Use kernel send mask symmetry to delay adding IPC permissions for labels that do not exist yet, adding them to that label's process upon creation o Add VM to ipc permissions list for rtl8139 and fxp in drivers.conf Left to future fixes: o Removal of the table order vs process numbers dependency altogether, possibly using per-process send list structures as used for SYSTEM calls o Proper assignment of send masks to boot processes; some of the assigned (~0) masks are much wider than necessary o Proper assignment of IPC send masks for many more servers in drivers.conf o Removal of the debugging warning about the now legitimate case where RS's add_forward_ipc cannot find the IPC destination's label yet
2009-07-02 18:25:31 +02:00
SYSTEM PM RS LOG TTY DS VM
pci inet amddev
;
};
service inet
{
uid 0;
};
service random
{
};
service readclock.drv
{
io 70:2;
system
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
UMAP # 14
DEVIO # 21
READBIOS # 35
;
uid 0;
};
service is
{
vm
2010-01-19 22:00:20 +01:00
INFO
;
uid 0;
};
service pci
{
io cf8:8 # PCI bus controller
4d0:2 # PIIX
;
system
PRIVCTL # 4
DEVIO # 21
;
uid 0;
};
service at_wini
{
io 1f0:8 # Controller 0
3f6 # Also controller 0
2006-11-01 15:55:00 +01:00
170:8 # Controller 1
376 # Also controller 1
;
irq
14 # Controller 0
2006-11-01 15:55:00 +01:00
15 # Controller 1
;
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
SDEVIO # 22
VDEVIO # 23
READBIOS # 35
;
2006-11-01 15:55:00 +01:00
pci class
1/1 # Mass storage / IDE
2009-02-12 13:28:28 +01:00
1/4 # Mass storage / RAID
2006-11-01 15:55:00 +01:00
;
};
service bios_wini
{
system
UMAP # 14
INT86 # 20
READBIOS # 35
;
};
service mfs
{
uid 0;
};
2007-05-30 17:40:12 +02:00
service isofs
2009-10-01 16:34:17 +02:00
{
system
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
UMAP # 14
2009-10-01 16:34:17 +02:00
;
uid 0;
};
service hgfs
{
ipc
SYSTEM PM VFS RS VM
;
};
service printer
2007-05-30 17:40:12 +02:00
{
io 378:4 # LPT1
278:4 # LPT2
2007-05-30 17:40:12 +02:00
;
irq
7 # PRINTER_IRQ
;
system
KILL # 6
UMAP # 14
VIRCOPY # 15
IRQCTL # 19
DEVIO # 21
VDEVIO # 23
2007-05-30 17:40:12 +02:00
;
};
service orinoco
{
system
PRIVCTL # 4
UMAP # 14
IRQCTL # 19
DEVIO # 21
VM_MAP # 30
;
pci device 1260/3873;
pci device 1186/1300;
uid 0;
};
service es1370
{
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
;
pci device 1274/5000;
};
service es1371
{
system
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
UMAP # 14
IRQCTL # 19
DEVIO # 21
;
pci device 1274/1371;
};
service amddev
{
pci device 1022/1103;
system
UMAP # 14
;
uid 0;
};
service ipc
{
system
UMAP # 14
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
VIRCOPY # 15
;
uid 0;
ipc
SYSTEM
PM
RS
LOG
TTY
DS
VM
USER
;
vm
REMAP
UNREMAP
GETPHYS
GETREFCNT
QUERYEXIT
;
};
service osscore
2009-10-01 18:36:14 +02:00
{
system
PRIVCTL # 4
UMAP # 14
IRQCTL # 19
DEVIO # 21
SDEVIO # 22
;
pci class
4/1 # Multimedia / Audio device
;
ipc
SYSTEM PM RS LOG TTY DS VFS VM
pci inet amddev
;
uid 0;
};
2009-12-02 11:08:58 +01:00
service rtl8169
{
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
;
pci device 10ec/8129;
pci device 10ec/8167;
pci device 10ec/8169;
pci device 1186/4300;
pci device 1259/c107;
pci device 1385/8169;
pci device 16ec/0116;
pci device 1737/1032;
ipc
SYSTEM PM RS LOG TTY DS VM
pci inet amddev
;
};
service filter
2009-12-02 11:08:58 +01:00
{
ipc
SYSTEM PM VFS RS DS VM
at_wini
bios_wini
;
control
at_wini
bios_wini
;
};
service e1000
{
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
;
pci device 8086/100e;
pci device 8086/107c;
pci device 8086/10cd;
ipc
SYSTEM PM RS LOG TTY DS VM
pci inet ;
};
service atl2
{
system
UMAP # 14
IRQCTL # 19
;
pci device 1969/2048;
ipc
SYSTEM PM RS TTY DS VM
pci inet
;
};
service dec21140A
{
system
UMAP # 14
IRQCTL # 19
DEVIO # 21
;
pci device 1011/0009;
ipc
SYSTEM PM RS LOG TTY DS VM
pci inet
;
};
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
service hello
{
system
IRQCTL # 19
DEVIO # 21
;
ipc
SYSTEM PM RS LOG TTY DS VM VFS
pci inet amddev
;
uid 0;
};