2005-07-08 19:23:44 +02:00
|
|
|
/* This file contains a driver for:
|
|
|
|
* /dev/klog - system log device
|
|
|
|
*
|
|
|
|
* Changes:
|
2005-07-21 20:29:52 +02:00
|
|
|
* 21 July 2005 - Support for diagnostic messages (Jorrit N. Herder)
|
|
|
|
* 7 July 2005 - Created (Ben Gras)
|
2005-07-08 19:23:44 +02:00
|
|
|
*/
|
|
|
|
|
2005-07-21 20:29:52 +02:00
|
|
|
#include "log.h"
|
2005-07-08 19:23:44 +02:00
|
|
|
#include <sys/time.h>
|
|
|
|
#include <sys/select.h>
|
Merge of David's ptrace branch. Summary:
o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL
o PM signal handling logic should now work properly, even with debuggers
being present
o Asynchronous PM/VFS protocol, full IPC support for senda(), and
AMF_NOREPLY senda() flag
DETAILS
Process stop and delay call handling of PM:
o Added sys_runctl() kernel call with sys_stop() and sys_resume()
aliases, for PM to stop and resume a process
o Added exception for sending/syscall-traced processes to sys_runctl(),
and matching SIGKREADY pseudo-signal to PM
o Fixed PM signal logic to deal with requests from a process after
stopping it (so-called "delay calls"), using the SIGKREADY facility
o Fixed various PM panics due to race conditions with delay calls versus
VFS calls
o Removed special PRIO_STOP priority value
o Added SYS_LOCK RTS kernel flag, to stop an individual process from
running while modifying its process structure
Signal and debugger handling in PM:
o Fixed debugger signals being dropped if a second signal arrives when
the debugger has not retrieved the first one
o Fixed debugger signals being sent to the debugger more than once
o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR
protocol message
o Detached debugger signals from general signal logic and from being
blocked on VFS calls, meaning that even VFS can now be traced
o Fixed debugger being unable to receive more than one pending signal in
one process stop
o Fixed signal delivery being delayed needlessly when multiple signals
are pending
o Fixed wait test for tracer, which was returning for children that were
not waited for
o Removed second parallel pending call from PM to VFS for any process
o Fixed process becoming runnable between exec() and debugger trap
o Added support for notifying the debugger before the parent when a
debugged child exits
o Fixed debugger death causing child to remain stopped forever
o Fixed consistently incorrect use of _NSIG
Extensions to ptrace():
o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a
debugger to and from a process
o Added T_SYSCALL ptrace request, to trace system calls
o Added T_SETOPT ptrace request, to set trace options
o Added TO_TRACEFORK trace option, to attach automatically to children
of a traced process
o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon
a successful exec() of the tracee
o Extended T_GETUSER ptrace support to allow retrieving a process's priv
structure
o Removed T_STOP ptrace request again, as it does not help implementing
debuggers properly
o Added MINIX3-specific ptrace test (test42)
o Added proper manual page for ptrace(2)
Asynchronous PM/VFS interface:
o Fixed asynchronous messages not being checked when receive() is called
with an endpoint other than ANY
o Added AMF_NOREPLY senda() flag, preventing such messages from
satisfying the receive part of a sendrec()
o Added asynsend3() that takes optional flags; asynsend() is now a
#define passing in 0 as third parameter
o Made PM/VFS protocol asynchronous; reintroduced tell_fs()
o Made PM_BASE request/reply number range unique
o Hacked in a horrible temporary workaround into RS to deal with newly
revealed RS-PM-VFS race condition triangle until VFS is asynchronous
System signal handling:
o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal
o Removed is-superuser check from PM's do_procstat() (aka getsigset())
o Added sigset macros to allow system processes to deal with the full
signal set, rather than just the POSIX subset
Miscellaneous PM fixes:
o Split do_getset into do_get and do_set, merging common code and making
structure clearer
o Fixed setpriority() being able to put to sleep processes using an
invalid parameter, or revive zombie processes
o Made find_proc() global; removed obsolete proc_from_pid()
o Cleanup here and there
Also included:
o Fixed false-positive boot order kernel warning
o Removed last traces of old NOTIFY_FROM code
THINGS OF POSSIBLE INTEREST
o It should now be possible to run PM at any priority, even lower than
user processes
o No assumptions are made about communication speed between PM and VFS,
although communication must be FIFO
o A debugger will now receive incoming debuggee signals at kill time
only; the process may not yet be fully stopped
o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
|
|
|
#include <minix/endpoint.h>
|
2005-07-08 19:23:44 +02:00
|
|
|
|
2005-07-27 16:31:04 +02:00
|
|
|
#define LOG_DEBUG 0 /* enable/ disable debugging */
|
2005-07-08 19:23:44 +02:00
|
|
|
|
2005-07-21 20:29:52 +02:00
|
|
|
#define NR_DEVS 1 /* number of minor devices */
|
2005-07-08 19:23:44 +02:00
|
|
|
#define MINOR_KLOG 0 /* /dev/klog */
|
|
|
|
|
|
|
|
#define LOGINC(n, i) do { (n) = (((n) + (i)) % LOG_SIZE); } while(0)
|
|
|
|
|
2005-07-21 20:29:52 +02:00
|
|
|
PUBLIC struct logdevice logdevices[NR_DEVS];
|
|
|
|
PRIVATE struct device log_geom[NR_DEVS]; /* base and size of devices */
|
|
|
|
PRIVATE int log_device = -1; /* current device */
|
2005-07-08 19:23:44 +02:00
|
|
|
|
|
|
|
FORWARD _PROTOTYPE( char *log_name, (void) );
|
|
|
|
FORWARD _PROTOTYPE( struct device *log_prepare, (int device) );
|
2006-11-27 15:21:43 +01:00
|
|
|
FORWARD _PROTOTYPE( int log_transfer, (int proc_nr, int opcode, u64_t position,
|
2009-12-02 10:57:48 +01:00
|
|
|
iovec_t *iov, unsigned nr_req) );
|
2005-07-08 19:23:44 +02:00
|
|
|
FORWARD _PROTOTYPE( int log_do_open, (struct driver *dp, message *m_ptr) );
|
|
|
|
FORWARD _PROTOTYPE( int log_cancel, (struct driver *dp, message *m_ptr) );
|
|
|
|
FORWARD _PROTOTYPE( int log_select, (struct driver *dp, message *m_ptr) );
|
2009-12-02 10:57:48 +01:00
|
|
|
FORWARD _PROTOTYPE( int log_other, (struct driver *dp, message *m_ptr) );
|
2005-07-08 19:23:44 +02:00
|
|
|
FORWARD _PROTOTYPE( void log_geometry, (struct partition *entry) );
|
2009-12-02 10:57:48 +01:00
|
|
|
FORWARD _PROTOTYPE( int subread, (struct logdevice *log, int count, int proc_nr, vir_bytes user_vir, size_t) );
|
2005-07-08 19:23:44 +02:00
|
|
|
|
|
|
|
/* Entry points to this driver. */
|
|
|
|
PRIVATE struct driver log_dtab = {
|
|
|
|
log_name, /* current device's name */
|
|
|
|
log_do_open, /* open or mount */
|
|
|
|
do_nop, /* nothing on a close */
|
2006-06-20 10:55:35 +02:00
|
|
|
nop_ioctl, /* ioctl nop */
|
2005-07-08 19:23:44 +02:00
|
|
|
log_prepare, /* prepare for I/O on a given minor device */
|
|
|
|
log_transfer, /* do the I/O */
|
|
|
|
nop_cleanup, /* no need to clean up */
|
|
|
|
log_geometry, /* geometry */
|
|
|
|
nop_alarm, /* no alarm */
|
|
|
|
log_cancel, /* CANCEL request */
|
|
|
|
log_select, /* DEV_SELECT request */
|
2005-08-25 10:19:11 +02:00
|
|
|
log_other, /* Unrecognized messages */
|
|
|
|
NULL /* HW int */
|
2005-07-08 19:23:44 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
extern int device_caller;
|
|
|
|
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
/* SEF functions and variables. */
|
|
|
|
FORWARD _PROTOTYPE( void sef_local_startup, (void) );
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
FORWARD _PROTOTYPE( int sef_cb_init_fresh, (int type, sef_init_info_t *info) );
|
New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
|
|
|
EXTERN _PROTOTYPE( int sef_cb_lu_prepare, (int state) );
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
EXTERN _PROTOTYPE( int sef_cb_lu_state_isvalid, (int state) );
|
|
|
|
EXTERN _PROTOTYPE( void sef_cb_lu_state_dump, (int state) );
|
New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
|
|
|
FORWARD _PROTOTYPE( void sef_cb_signal_handler, (int signo) );
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
|
2005-07-08 19:23:44 +02:00
|
|
|
/*===========================================================================*
|
|
|
|
* main *
|
|
|
|
*===========================================================================*/
|
2005-08-25 15:02:15 +02:00
|
|
|
PUBLIC int main(void)
|
2005-07-08 19:23:44 +02:00
|
|
|
{
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
/* SEF local startup. */
|
|
|
|
sef_local_startup();
|
|
|
|
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
/* Call the generic receive loop. */
|
2009-12-02 10:57:48 +01:00
|
|
|
driver_task(&log_dtab, DRIVER_ASYN);
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
|
2005-08-25 15:02:15 +02:00
|
|
|
return(OK);
|
2005-07-08 19:23:44 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
* sef_local_startup *
|
|
|
|
*===========================================================================*/
|
|
|
|
PRIVATE void sef_local_startup()
|
|
|
|
{
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
/* Register init callbacks. */
|
|
|
|
sef_setcb_init_fresh(sef_cb_init_fresh);
|
|
|
|
sef_setcb_init_lu(sef_cb_init_fresh);
|
|
|
|
sef_setcb_init_restart(sef_cb_init_fresh);
|
|
|
|
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
/* Register live update callbacks. */
|
|
|
|
sef_setcb_lu_prepare(sef_cb_lu_prepare);
|
|
|
|
sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid);
|
|
|
|
sef_setcb_lu_state_dump(sef_cb_lu_state_dump);
|
|
|
|
|
New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
|
|
|
/* Register signal callbacks. */
|
|
|
|
sef_setcb_signal_handler(sef_cb_signal_handler);
|
|
|
|
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
/* Let SEF perform startup. */
|
|
|
|
sef_startup();
|
|
|
|
}
|
|
|
|
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
/*===========================================================================*
|
|
|
|
* sef_cb_init_fresh *
|
|
|
|
*===========================================================================*/
|
2010-04-07 13:25:51 +02:00
|
|
|
PRIVATE int sef_cb_init_fresh(int type, sef_init_info_t *UNUSED(info))
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
{
|
|
|
|
/* Initialize the log driver. */
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Initialize log devices. */
|
|
|
|
for(i = 0; i < NR_DEVS; i++) {
|
|
|
|
log_geom[i].dv_size = cvul64(LOG_SIZE);
|
|
|
|
log_geom[i].dv_base = cvul64((long)logdevices[i].log_buffer);
|
|
|
|
logdevices[i].log_size = logdevices[i].log_read =
|
|
|
|
logdevices[i].log_write =
|
|
|
|
logdevices[i].log_select_alerted =
|
|
|
|
logdevices[i].log_selected =
|
|
|
|
logdevices[i].log_select_ready_ops = 0;
|
|
|
|
logdevices[i].log_proc_nr = 0;
|
|
|
|
logdevices[i].log_revive_alerted = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return(OK);
|
|
|
|
}
|
|
|
|
|
New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
|
|
|
/*===========================================================================*
|
|
|
|
* sef_cb_signal_handler *
|
|
|
|
*===========================================================================*/
|
|
|
|
PRIVATE void sef_cb_signal_handler(int signo)
|
|
|
|
{
|
|
|
|
/* Only check for a pending message from the kernel, ignore anything else. */
|
|
|
|
if (signo != SIGKMESS) return;
|
|
|
|
|
|
|
|
do_new_kmess(SYSTEM);
|
|
|
|
}
|
|
|
|
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
/*===========================================================================*
|
|
|
|
* log_name *
|
2005-07-08 19:23:44 +02:00
|
|
|
*===========================================================================*/
|
|
|
|
PRIVATE char *log_name()
|
|
|
|
{
|
|
|
|
/* Return a name for the current device. */
|
|
|
|
static char name[] = "log";
|
|
|
|
return name;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* log_prepare *
|
|
|
|
*===========================================================================*/
|
|
|
|
PRIVATE struct device *log_prepare(device)
|
|
|
|
int device;
|
|
|
|
{
|
|
|
|
/* Prepare for I/O on a device: check if the minor device number is ok. */
|
|
|
|
|
2010-05-10 15:26:00 +02:00
|
|
|
if (device < 0 || device >= NR_DEVS) return(NULL);
|
2005-07-08 19:23:44 +02:00
|
|
|
log_device = device;
|
|
|
|
|
|
|
|
return(&log_geom[device]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2009-12-02 10:57:48 +01:00
|
|
|
* subwrite *
|
2005-07-08 19:23:44 +02:00
|
|
|
*===========================================================================*/
|
|
|
|
PRIVATE int
|
2006-06-20 10:55:35 +02:00
|
|
|
subwrite(struct logdevice *log, int count, int proc_nr,
|
2009-12-02 10:57:48 +01:00
|
|
|
vir_bytes user_vir, size_t offset)
|
2005-07-08 19:23:44 +02:00
|
|
|
{
|
2008-02-25 12:54:04 +01:00
|
|
|
int d, r;
|
2005-07-08 19:23:44 +02:00
|
|
|
char *buf;
|
2008-02-25 12:54:04 +01:00
|
|
|
message m;
|
|
|
|
|
2005-07-08 19:23:44 +02:00
|
|
|
if (log->log_write + count > LOG_SIZE)
|
|
|
|
count = LOG_SIZE - log->log_write;
|
|
|
|
buf = log->log_buffer + log->log_write;
|
|
|
|
|
2005-07-22 20:24:17 +02:00
|
|
|
if(proc_nr == SELF) {
|
|
|
|
memcpy(buf, (char *) user_vir, count);
|
|
|
|
}
|
|
|
|
else {
|
2009-12-02 10:57:48 +01:00
|
|
|
if((r=sys_safecopyfrom(proc_nr, user_vir, offset,
|
2006-06-20 10:55:35 +02:00
|
|
|
(vir_bytes)buf, count, D)) != OK)
|
2005-07-22 20:24:17 +02:00
|
|
|
return r;
|
|
|
|
}
|
2005-07-08 19:23:44 +02:00
|
|
|
|
|
|
|
LOGINC(log->log_write, count);
|
|
|
|
log->log_size += count;
|
|
|
|
|
|
|
|
if(log->log_size > LOG_SIZE) {
|
|
|
|
int overflow;
|
|
|
|
overflow = log->log_size - LOG_SIZE;
|
|
|
|
log->log_size -= overflow;
|
|
|
|
LOGINC(log->log_read, overflow);
|
|
|
|
}
|
|
|
|
|
2005-07-27 15:11:03 +02:00
|
|
|
if(log->log_size > 0 && log->log_proc_nr && !log->log_revive_alerted) {
|
2005-07-08 19:23:44 +02:00
|
|
|
/* Someone who was suspended on read can now
|
|
|
|
* be revived.
|
|
|
|
*/
|
2005-07-27 15:11:03 +02:00
|
|
|
log->log_status = subread(log, log->log_iosize,
|
2006-06-20 10:55:35 +02:00
|
|
|
log->log_proc_nr, log->log_user_vir_g,
|
2009-12-02 10:57:48 +01:00
|
|
|
log->log_user_vir_offset);
|
2008-02-25 12:54:04 +01:00
|
|
|
|
|
|
|
m.m_type = DEV_REVIVE;
|
|
|
|
m.REP_ENDPT = log->log_proc_nr;
|
|
|
|
m.REP_STATUS = log->log_status;
|
|
|
|
m.REP_IO_GRANT = log->log_user_vir_g;
|
|
|
|
r= send(log->log_source, &m);
|
|
|
|
if (r != OK)
|
|
|
|
{
|
|
|
|
printf("log`subwrite: send to %d failed: %d\n",
|
|
|
|
log->log_source, r);
|
|
|
|
}
|
|
|
|
log->log_proc_nr = 0;
|
2005-07-27 15:11:03 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
if(log->log_size > 0)
|
|
|
|
log->log_select_ready_ops |= SEL_RD;
|
|
|
|
|
|
|
|
if(log->log_size > 0 && log->log_selected &&
|
|
|
|
!(log->log_select_alerted)) {
|
2005-07-08 19:23:44 +02:00
|
|
|
/* Someone(s) who was/were select()ing can now
|
|
|
|
* be awoken. If there was a blocking read (above),
|
|
|
|
* this can only happen if the blocking read didn't
|
|
|
|
* swallow all the data (log_size > 0).
|
|
|
|
*/
|
|
|
|
if(log->log_selected & SEL_RD) {
|
2008-02-25 12:54:04 +01:00
|
|
|
d= log-logdevices;
|
|
|
|
m.m_type = DEV_SEL_REPL2;
|
|
|
|
m.DEV_SEL_OPS = log->log_select_ready_ops;
|
|
|
|
m.DEV_MINOR = d;
|
2005-07-08 19:23:44 +02:00
|
|
|
#if LOG_DEBUG
|
2008-02-25 12:54:04 +01:00
|
|
|
printf("select sending DEV_SEL_REPL2\n");
|
2005-07-08 19:23:44 +02:00
|
|
|
#endif
|
2008-02-25 12:54:04 +01:00
|
|
|
r= send(log->log_select_proc, &m);
|
|
|
|
if (r != OK)
|
|
|
|
{
|
|
|
|
printf(
|
|
|
|
"log`subwrite: send to %d failed: %d\n",
|
|
|
|
log->log_select_proc, r);
|
|
|
|
}
|
|
|
|
log->log_selected &= ~log->log_select_ready_ops;
|
2005-07-08 19:23:44 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
2005-07-22 20:24:17 +02:00
|
|
|
/*===========================================================================*
|
|
|
|
* log_append *
|
|
|
|
*===========================================================================*/
|
|
|
|
PUBLIC void
|
|
|
|
log_append(char *buf, int count)
|
|
|
|
{
|
|
|
|
int w = 0, skip = 0;
|
|
|
|
|
|
|
|
if(count < 1) return;
|
|
|
|
if(count > LOG_SIZE) skip = count - LOG_SIZE;
|
|
|
|
count -= skip;
|
|
|
|
buf += skip;
|
2009-12-02 10:57:48 +01:00
|
|
|
w = subwrite(&logdevices[0], count, SELF, (vir_bytes) buf,0);
|
2005-07-22 20:24:17 +02:00
|
|
|
|
|
|
|
if(w > 0 && w < count)
|
2009-12-02 10:57:48 +01:00
|
|
|
subwrite(&logdevices[0], count-w, SELF, (vir_bytes) buf+w,0);
|
2005-07-22 20:24:17 +02:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2005-07-08 19:23:44 +02:00
|
|
|
/*===========================================================================*
|
|
|
|
* subread *
|
|
|
|
*===========================================================================*/
|
|
|
|
PRIVATE int
|
2006-06-20 10:55:35 +02:00
|
|
|
subread(struct logdevice *log, int count, int proc_nr,
|
2009-12-02 10:57:48 +01:00
|
|
|
vir_bytes user_vir, size_t offset)
|
2005-07-08 19:23:44 +02:00
|
|
|
{
|
|
|
|
char *buf;
|
|
|
|
int r;
|
|
|
|
if (count > log->log_size)
|
|
|
|
count = log->log_size;
|
|
|
|
if (log->log_read + count > LOG_SIZE)
|
|
|
|
count = LOG_SIZE - log->log_read;
|
|
|
|
|
|
|
|
buf = log->log_buffer + log->log_read;
|
2009-12-02 10:57:48 +01:00
|
|
|
if((r=sys_safecopyto(proc_nr, user_vir, offset,
|
2006-06-20 10:55:35 +02:00
|
|
|
(vir_bytes)buf, count, D)) != OK)
|
|
|
|
return r;
|
2005-07-08 19:23:44 +02:00
|
|
|
|
|
|
|
LOGINC(log->log_read, count);
|
|
|
|
log->log_size -= count;
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* log_transfer *
|
|
|
|
*===========================================================================*/
|
2009-12-02 10:57:48 +01:00
|
|
|
PRIVATE int log_transfer(proc_nr, opcode, position, iov, nr_req)
|
2005-07-08 19:23:44 +02:00
|
|
|
int proc_nr; /* process doing the request */
|
2007-02-07 17:22:19 +01:00
|
|
|
int opcode; /* DEV_GATHER_S or DEV_SCATTER_S */
|
2006-11-27 15:21:43 +01:00
|
|
|
u64_t position; /* offset on device to read or write */
|
2005-07-08 19:23:44 +02:00
|
|
|
iovec_t *iov; /* pointer to read or write request vector */
|
|
|
|
unsigned nr_req; /* length of request vector */
|
|
|
|
{
|
|
|
|
/* Read or write one the driver's minor devices. */
|
|
|
|
unsigned count;
|
|
|
|
vir_bytes user_vir;
|
2005-08-25 15:02:15 +02:00
|
|
|
int accumulated_read = 0;
|
2005-07-08 19:23:44 +02:00
|
|
|
struct logdevice *log;
|
2006-06-20 10:55:35 +02:00
|
|
|
size_t vir_offset = 0;
|
2005-07-08 19:23:44 +02:00
|
|
|
|
|
|
|
if(log_device < 0 || log_device >= NR_DEVS)
|
|
|
|
return EIO;
|
|
|
|
|
|
|
|
/* Get minor device number and check for /dev/null. */
|
|
|
|
log = &logdevices[log_device];
|
|
|
|
|
|
|
|
while (nr_req > 0) {
|
|
|
|
/* How much to transfer and where to / from. */
|
|
|
|
count = iov->iov_size;
|
|
|
|
user_vir = iov->iov_addr;
|
|
|
|
|
|
|
|
switch (log_device) {
|
|
|
|
|
|
|
|
case MINOR_KLOG:
|
2007-02-07 17:22:19 +01:00
|
|
|
if (opcode == DEV_GATHER_S) {
|
2005-07-08 19:23:44 +02:00
|
|
|
if (log->log_proc_nr || count < 1) {
|
|
|
|
/* There's already someone hanging to read, or
|
|
|
|
* no real I/O requested.
|
|
|
|
*/
|
|
|
|
return(OK);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!log->log_size) {
|
|
|
|
if(accumulated_read)
|
|
|
|
return OK;
|
|
|
|
/* No data available; let caller block. */
|
|
|
|
log->log_proc_nr = proc_nr;
|
|
|
|
log->log_iosize = count;
|
2006-06-20 10:55:35 +02:00
|
|
|
log->log_user_vir_g = user_vir;
|
|
|
|
log->log_user_vir_offset = 0;
|
2005-07-27 15:11:03 +02:00
|
|
|
log->log_revive_alerted = 0;
|
2005-07-08 19:23:44 +02:00
|
|
|
|
|
|
|
/* Device_caller is a global in drivers library. */
|
|
|
|
log->log_source = device_caller;
|
|
|
|
#if LOG_DEBUG
|
|
|
|
printf("blocked %d (%d)\n",
|
|
|
|
log->log_source, log->log_proc_nr);
|
|
|
|
#endif
|
2008-02-25 12:54:04 +01:00
|
|
|
return(EDONTREPLY);
|
2005-07-08 19:23:44 +02:00
|
|
|
}
|
2009-12-02 10:57:48 +01:00
|
|
|
count = subread(log, count, proc_nr, user_vir, vir_offset);
|
2005-07-08 19:23:44 +02:00
|
|
|
if(count < 0) {
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
accumulated_read += count;
|
|
|
|
} else {
|
2009-12-02 10:57:48 +01:00
|
|
|
count = subwrite(log, count, proc_nr, user_vir, vir_offset);
|
2005-07-08 19:23:44 +02:00
|
|
|
if(count < 0)
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
/* Unknown (illegal) minor device. */
|
|
|
|
default:
|
|
|
|
return(EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Book the number of bytes transferred. */
|
2006-06-20 10:55:35 +02:00
|
|
|
vir_offset += count;
|
|
|
|
if ((iov->iov_size -= count) == 0) { iov++; nr_req--; vir_offset = 0; }
|
2005-07-08 19:23:44 +02:00
|
|
|
}
|
|
|
|
return(OK);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*============================================================================*
|
|
|
|
* log_do_open *
|
|
|
|
*============================================================================*/
|
|
|
|
PRIVATE int log_do_open(dp, m_ptr)
|
|
|
|
struct driver *dp;
|
|
|
|
message *m_ptr;
|
|
|
|
{
|
2010-05-10 15:26:00 +02:00
|
|
|
if (log_prepare(m_ptr->DEVICE) == NULL) return(ENXIO);
|
2005-07-08 19:23:44 +02:00
|
|
|
return(OK);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*============================================================================*
|
|
|
|
* log_geometry *
|
|
|
|
*============================================================================*/
|
|
|
|
PRIVATE void log_geometry(entry)
|
|
|
|
struct partition *entry;
|
|
|
|
{
|
|
|
|
/* take a page from the fake memory device geometry */
|
|
|
|
entry->heads = 64;
|
|
|
|
entry->sectors = 32;
|
|
|
|
entry->cylinders = div64u(log_geom[log_device].dv_size, SECTOR_SIZE) /
|
|
|
|
(entry->heads * entry->sectors);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*============================================================================*
|
|
|
|
* log_cancel *
|
|
|
|
*============================================================================*/
|
|
|
|
PRIVATE int log_cancel(dp, m_ptr)
|
|
|
|
struct driver *dp;
|
|
|
|
message *m_ptr;
|
|
|
|
{
|
|
|
|
int d;
|
|
|
|
d = m_ptr->TTY_LINE;
|
|
|
|
if(d < 0 || d >= NR_DEVS)
|
|
|
|
return EINVAL;
|
|
|
|
logdevices[d].log_proc_nr = 0;
|
2005-07-27 15:11:03 +02:00
|
|
|
logdevices[d].log_revive_alerted = 0;
|
2005-07-08 19:23:44 +02:00
|
|
|
return(OK);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*============================================================================*
|
2005-07-22 20:24:17 +02:00
|
|
|
* log_other *
|
2005-07-08 19:23:44 +02:00
|
|
|
*============================================================================*/
|
2009-12-02 10:57:48 +01:00
|
|
|
PRIVATE int log_other(dp, m_ptr)
|
2005-07-08 19:23:44 +02:00
|
|
|
struct driver *dp;
|
|
|
|
message *m_ptr;
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
|
|
|
|
/* This function gets messages that the generic driver doesn't
|
|
|
|
* understand.
|
|
|
|
*/
|
Merge of David's ptrace branch. Summary:
o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL
o PM signal handling logic should now work properly, even with debuggers
being present
o Asynchronous PM/VFS protocol, full IPC support for senda(), and
AMF_NOREPLY senda() flag
DETAILS
Process stop and delay call handling of PM:
o Added sys_runctl() kernel call with sys_stop() and sys_resume()
aliases, for PM to stop and resume a process
o Added exception for sending/syscall-traced processes to sys_runctl(),
and matching SIGKREADY pseudo-signal to PM
o Fixed PM signal logic to deal with requests from a process after
stopping it (so-called "delay calls"), using the SIGKREADY facility
o Fixed various PM panics due to race conditions with delay calls versus
VFS calls
o Removed special PRIO_STOP priority value
o Added SYS_LOCK RTS kernel flag, to stop an individual process from
running while modifying its process structure
Signal and debugger handling in PM:
o Fixed debugger signals being dropped if a second signal arrives when
the debugger has not retrieved the first one
o Fixed debugger signals being sent to the debugger more than once
o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR
protocol message
o Detached debugger signals from general signal logic and from being
blocked on VFS calls, meaning that even VFS can now be traced
o Fixed debugger being unable to receive more than one pending signal in
one process stop
o Fixed signal delivery being delayed needlessly when multiple signals
are pending
o Fixed wait test for tracer, which was returning for children that were
not waited for
o Removed second parallel pending call from PM to VFS for any process
o Fixed process becoming runnable between exec() and debugger trap
o Added support for notifying the debugger before the parent when a
debugged child exits
o Fixed debugger death causing child to remain stopped forever
o Fixed consistently incorrect use of _NSIG
Extensions to ptrace():
o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a
debugger to and from a process
o Added T_SYSCALL ptrace request, to trace system calls
o Added T_SETOPT ptrace request, to set trace options
o Added TO_TRACEFORK trace option, to attach automatically to children
of a traced process
o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon
a successful exec() of the tracee
o Extended T_GETUSER ptrace support to allow retrieving a process's priv
structure
o Removed T_STOP ptrace request again, as it does not help implementing
debuggers properly
o Added MINIX3-specific ptrace test (test42)
o Added proper manual page for ptrace(2)
Asynchronous PM/VFS interface:
o Fixed asynchronous messages not being checked when receive() is called
with an endpoint other than ANY
o Added AMF_NOREPLY senda() flag, preventing such messages from
satisfying the receive part of a sendrec()
o Added asynsend3() that takes optional flags; asynsend() is now a
#define passing in 0 as third parameter
o Made PM/VFS protocol asynchronous; reintroduced tell_fs()
o Made PM_BASE request/reply number range unique
o Hacked in a horrible temporary workaround into RS to deal with newly
revealed RS-PM-VFS race condition triangle until VFS is asynchronous
System signal handling:
o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal
o Removed is-superuser check from PM's do_procstat() (aka getsigset())
o Added sigset macros to allow system processes to deal with the full
signal set, rather than just the POSIX subset
Miscellaneous PM fixes:
o Split do_getset into do_get and do_set, merging common code and making
structure clearer
o Fixed setpriority() being able to put to sleep processes using an
invalid parameter, or revive zombie processes
o Made find_proc() global; removed obsolete proc_from_pid()
o Cleanup here and there
Also included:
o Fixed false-positive boot order kernel warning
o Removed last traces of old NOTIFY_FROM code
THINGS OF POSSIBLE INTEREST
o It should now be possible to run PM at any priority, even lower than
user processes
o No assumptions are made about communication speed between PM and VFS,
although communication must be FIFO
o A debugger will now receive incoming debuggee signals at kill time
only; the process may not yet be fully stopped
o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
|
|
|
if (is_notify(m_ptr->m_type)) {
|
|
|
|
switch (_ENDPOINT_P(m_ptr->m_source)) {
|
|
|
|
case TTY_PROC_NR:
|
|
|
|
do_new_kmess(m_ptr->m_source);
|
|
|
|
r = EDONTREPLY;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
r = EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
2005-07-08 19:23:44 +02:00
|
|
|
switch(m_ptr->m_type) {
|
2009-01-26 18:43:59 +01:00
|
|
|
case DIAGNOSTICS_OLD: {
|
2006-06-20 10:55:35 +02:00
|
|
|
r = do_diagnostics(m_ptr, 0);
|
|
|
|
break;
|
|
|
|
}
|
2009-01-26 18:43:59 +01:00
|
|
|
case ASYN_DIAGNOSTICS_OLD:
|
|
|
|
case DIAGNOSTICS_S_OLD:
|
2006-06-20 10:55:35 +02:00
|
|
|
r = do_diagnostics(m_ptr, 1);
|
2005-07-21 20:29:52 +02:00
|
|
|
break;
|
2005-07-27 15:11:03 +02:00
|
|
|
case DEV_STATUS: {
|
2008-02-25 12:54:04 +01:00
|
|
|
printf("log_other: unexpected DEV_STATUS request\n");
|
2005-07-27 15:11:03 +02:00
|
|
|
r = EDONTREPLY;
|
|
|
|
break;
|
|
|
|
}
|
2005-07-21 20:29:52 +02:00
|
|
|
default:
|
|
|
|
r = EINVAL;
|
|
|
|
break;
|
2005-07-08 19:23:44 +02:00
|
|
|
}
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*============================================================================*
|
|
|
|
* log_select *
|
|
|
|
*============================================================================*/
|
|
|
|
PRIVATE int log_select(dp, m_ptr)
|
|
|
|
struct driver *dp;
|
|
|
|
message *m_ptr;
|
|
|
|
{
|
|
|
|
int d, ready_ops = 0, ops = 0;
|
|
|
|
d = m_ptr->TTY_LINE;
|
|
|
|
if(d < 0 || d >= NR_DEVS) {
|
|
|
|
#if LOG_DEBUG
|
|
|
|
printf("line %d? EINVAL\n", d);
|
|
|
|
#endif
|
|
|
|
return EINVAL;
|
|
|
|
}
|
|
|
|
|
2006-03-03 11:21:45 +01:00
|
|
|
ops = m_ptr->IO_ENDPT & (SEL_RD|SEL_WR|SEL_ERR);
|
2005-07-08 19:23:44 +02:00
|
|
|
|
|
|
|
/* Read blocks when there is no log. */
|
2006-03-03 11:21:45 +01:00
|
|
|
if((m_ptr->IO_ENDPT & SEL_RD) && logdevices[d].log_size > 0) {
|
2005-07-08 19:23:44 +02:00
|
|
|
#if LOG_DEBUG
|
|
|
|
printf("log can read; size %d\n", logdevices[d].log_size);
|
|
|
|
#endif
|
|
|
|
ready_ops |= SEL_RD; /* writes never block */
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Write never blocks. */
|
2006-03-03 11:21:45 +01:00
|
|
|
if(m_ptr->IO_ENDPT & SEL_WR) ready_ops |= SEL_WR;
|
2005-07-08 19:23:44 +02:00
|
|
|
|
|
|
|
/* Enable select calback if no operations were
|
|
|
|
* ready to go, but operations were requested,
|
|
|
|
* and notify was enabled.
|
|
|
|
*/
|
2006-03-03 11:21:45 +01:00
|
|
|
if((m_ptr->IO_ENDPT & SEL_NOTIFY) && ops && !ready_ops) {
|
2005-07-08 19:23:44 +02:00
|
|
|
logdevices[d].log_selected |= ops;
|
|
|
|
logdevices[d].log_select_proc = m_ptr->m_source;
|
|
|
|
#if LOG_DEBUG
|
|
|
|
printf("log setting selector.\n");
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
#if LOG_DEBUG
|
|
|
|
printf("log returning ops %d\n", ready_ops);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return(ready_ops);
|
|
|
|
}
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
|