minix/servers/inet/mnx_eth.c

836 lines
19 KiB
C
Raw Normal View History

2005-04-21 16:53:53 +02:00
/*
inet/mnx_eth.c
Created: Jan 2, 1992 by Philip Homburg
Copyright 1995 Philip Homburg
*/
#include "inet.h"
2006-07-10 14:55:33 +02:00
#include <minix/safecopies.h>
2005-04-21 16:53:53 +02:00
#include "proto.h"
#include "osdep_eth.h"
#include "generic/type.h"
#include "generic/assert.h"
#include "generic/buf.h"
#include "generic/clock.h"
#include "generic/eth.h"
#include "generic/eth_int.h"
#include "generic/sr.h"
THIS_FILE
FORWARD void setup_read(eth_port_t *eth_port);
FORWARD void read_int(eth_port_t *eth_port, int count);
FORWARD void eth_issue_send(eth_port_t *eth_port);
FORWARD void write_int(eth_port_t *eth_port);
FORWARD void eth_restart(eth_port_t *eth_port, endpoint_t endpoint);
FORWARD void send_getstat(eth_port_t *eth_port);
2005-04-21 16:53:53 +02:00
PUBLIC void osdep_eth_init()
{
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
int i, j, rport;
2005-04-21 16:53:53 +02:00
struct eth_conf *ecp;
eth_port_t *eth_port, *rep;
2006-07-10 14:55:33 +02:00
cp_grant_id_t gid;
2005-04-21 16:53:53 +02:00
/* First initialize normal ethernet interfaces */
for (i= 0, ecp= eth_conf, eth_port= eth_port_table;
i<eth_conf_nr; i++, ecp++, eth_port++)
2005-04-21 16:53:53 +02:00
{
2006-07-10 14:55:33 +02:00
/* Set all grants to invalid */
for (j= 0; j<IOVEC_NR; j++)
eth_port->etp_osdep.etp_wr_iovec[j].iov_grant= -1;
eth_port->etp_osdep.etp_wr_vec_grant= -1;
for (j= 0; j<RD_IOVEC; j++)
eth_port->etp_osdep.etp_rd_iovec[j].iov_grant= -1;
eth_port->etp_osdep.etp_rd_vec_grant= -1;
eth_port->etp_osdep.etp_state= OEPS_INIT;
eth_port->etp_osdep.etp_flags= OEPF_EMPTY;
eth_port->etp_osdep.etp_stat_gid= -1;
eth_port->etp_osdep.etp_stat_buf= NULL;
if (eth_is_vlan(ecp))
continue;
2006-07-10 14:55:33 +02:00
/* Allocate grants */
for (j= 0; j<IOVEC_NR; j++)
{
if (cpf_getgrants(&gid, 1) != 1)
{
ip_panic((
"osdep_eth_init: cpf_getgrants failed: %d\n",
errno));
}
eth_port->etp_osdep.etp_wr_iovec[j].iov_grant= gid;
}
if (cpf_getgrants(&gid, 1) != 1)
{
ip_panic((
"osdep_eth_init: cpf_getgrants failed: %d\n",
errno));
}
eth_port->etp_osdep.etp_wr_vec_grant= gid;
for (j= 0; j<RD_IOVEC; j++)
{
if (cpf_getgrants(&gid, 1) != 1)
{
ip_panic((
"osdep_eth_init: cpf_getgrants failed: %d\n",
errno));
}
eth_port->etp_osdep.etp_rd_iovec[j].iov_grant= gid;
}
if (cpf_getgrants(&gid, 1) != 1)
{
ip_panic((
"osdep_eth_init: cpf_getgrants failed: %d\n",
errno));
}
eth_port->etp_osdep.etp_rd_vec_grant= gid;
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
eth_port->etp_osdep.etp_task= NONE;
eth_port->etp_osdep.etp_recvconf= 0;
2005-04-21 16:53:53 +02:00
ev_init(&eth_port->etp_osdep.etp_recvev);
sr_add_minor(if2minor(ecp->ec_ifno, ETH_DEV_OFF),
i, eth_open, eth_close, eth_read,
eth_write, eth_ioctl, eth_cancel, eth_select);
2005-04-21 16:53:53 +02:00
eth_port->etp_flags |= EPF_ENABLED;
eth_port->etp_vlan= 0;
eth_port->etp_vlan_port= NULL;
2005-04-21 16:53:53 +02:00
eth_port->etp_wr_pack= 0;
eth_port->etp_rd_pack= 0;
}
/* And now come the VLANs */
for (i= 0, ecp= eth_conf, eth_port= eth_port_table;
i<eth_conf_nr; i++, ecp++, eth_port++)
{
if (!eth_is_vlan(ecp))
continue;
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
eth_port->etp_osdep.etp_task= NONE;
ev_init(&eth_port->etp_osdep.etp_recvev);
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
rport= ecp->ec_port;
assert(rport >= 0 && rport < eth_conf_nr);
rep= &eth_port_table[rport];
if (!(rep->etp_flags & EPF_ENABLED))
{
printf(
"eth%d: underlying ethernet device %d not enabled",
i, rport);
continue;
}
if (rep->etp_vlan != 0)
{
printf(
"eth%d: underlying ethernet device %d is a VLAN",
i, rport);
continue;
}
if (rep->etp_flags & EPF_GOT_ADDR)
{
eth_port->etp_ethaddr= rep->etp_ethaddr;
printf("osdep_eth_init: setting EPF_GOT_ADDR\n");
eth_port->etp_flags |= EPF_GOT_ADDR;
}
sr_add_minor(if2minor(ecp->ec_ifno, ETH_DEV_OFF),
i, eth_open, eth_close, eth_read,
eth_write, eth_ioctl, eth_cancel, eth_select);
eth_port->etp_flags |= EPF_ENABLED;
eth_port->etp_vlan= ecp->ec_vlan;
eth_port->etp_vlan_port= rep;
assert(eth_port->etp_vlan != 0);
eth_port->etp_wr_pack= 0;
eth_port->etp_rd_pack= 0;
eth_reg_vlan(rep, eth_port);
2005-04-21 16:53:53 +02:00
}
}
PUBLIC void eth_write_port(eth_port, pack)
eth_port_t *eth_port;
acc_t *pack;
{
assert(!no_ethWritePort);
assert(!eth_port->etp_vlan);
2005-04-21 16:53:53 +02:00
assert(eth_port->etp_wr_pack == NULL);
eth_port->etp_wr_pack= pack;
if (eth_port->etp_osdep.etp_state != OEPS_IDLE)
2005-04-21 16:53:53 +02:00
{
eth_port->etp_osdep.etp_flags |= OEPF_NEED_SEND;
return;
2005-04-21 16:53:53 +02:00
}
eth_issue_send(eth_port);
}
PUBLIC void eth_rec(message *m)
{
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
int i, r, m_type, flags;
eth_port_t *loc_port, *vlan_port;
m_type= m->m_type;
2005-04-21 16:53:53 +02:00
assert(m_type == DL_CONF_REPLY || m_type == DL_TASK_REPLY ||
m_type == DL_STAT_REPLY);
2006-07-10 14:55:33 +02:00
for (i=0, loc_port= eth_port_table; i<eth_conf_nr; i++, loc_port++)
2005-04-21 16:53:53 +02:00
{
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
if (loc_port->etp_osdep.etp_task == m->m_source)
break;
}
if (i >= eth_conf_nr)
{
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
printf("eth_rec: message 0x%x from unknown driver %d\n",
m_type, m->m_source);
return;
2005-04-21 16:53:53 +02:00
}
if (loc_port->etp_osdep.etp_state == OEPS_CONF_SENT)
2005-04-21 16:53:53 +02:00
{
if (m_type == DL_TASK_REPLY)
{
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
flags= m->DL_FLAGS;
2005-04-21 16:53:53 +02:00
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
if (flags & DL_PACK_SEND)
write_int(loc_port);
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
if (flags & DL_PACK_RECV)
read_int(loc_port, m->DL_COUNT);
return;
}
2005-04-21 16:53:53 +02:00
if (m_type != DL_CONF_REPLY)
2005-04-21 16:53:53 +02:00
{
printf(
"eth_rec: got bad message type 0x%x from %d in CONF state\n",
m_type, m->m_source);
return;
2005-04-21 16:53:53 +02:00
}
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
r= m->DL_STAT;
if (r < 0)
2005-04-21 16:53:53 +02:00
{
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
ip_warning(("eth_rec: DL_CONF returned error %d\n",
r));
/* Just leave it in limbo. Nothing more we can do. */
return;
2005-04-21 16:53:53 +02:00
}
loc_port->etp_osdep.etp_flags &= ~OEPF_NEED_CONF;
loc_port->etp_osdep.etp_state= OEPS_IDLE;
loc_port->etp_flags |= EPF_ENABLED;
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
loc_port->etp_ethaddr= *(ether_addr_t *)m->DL_HWADDR;
if (!(loc_port->etp_flags & EPF_GOT_ADDR))
2005-04-21 16:53:53 +02:00
{
loc_port->etp_flags |= EPF_GOT_ADDR;
#if 0
printf("eth_rec: calling eth_restart_ioctl\n");
#endif
eth_restart_ioctl(loc_port);
/* Also update any VLANs on this device */
for (i=0, vlan_port= eth_port_table; i<eth_conf_nr;
i++, vlan_port++)
{
if (!(vlan_port->etp_flags & EPF_ENABLED))
continue;
if (vlan_port->etp_vlan_port != loc_port)
continue;
vlan_port->etp_ethaddr= loc_port->etp_ethaddr;
vlan_port->etp_flags |= EPF_GOT_ADDR;
eth_restart_ioctl(vlan_port);
}
2005-04-21 16:53:53 +02:00
}
if (!(loc_port->etp_flags & EPF_READ_IP))
setup_read (loc_port);
2005-04-21 16:53:53 +02:00
#if 0
if (loc_port->etp_osdep.etp_flags & OEPF_NEED_SEND)
{
printf("eth_rec(conf): OEPF_NEED_SEND is set\n");
}
if (loc_port->etp_osdep.etp_flags & OEPF_NEED_RECV)
{
printf("eth_rec(conf): OEPF_NEED_RECV is set\n");
}
if (loc_port->etp_osdep.etp_flags & OEPF_NEED_STAT)
{
printf("eth_rec(conf): OEPF_NEED_STAT is set\n");
}
#endif
2005-04-21 16:53:53 +02:00
return;
}
if (loc_port->etp_osdep.etp_state == OEPS_GETSTAT_SENT)
2005-04-21 16:53:53 +02:00
{
if (m_type != DL_STAT_REPLY)
{
printf(
"eth_rec: got bad message type 0x%x from %d in GETSTAT state\n",
m_type, m->m_source);
return;
}
2005-04-21 16:53:53 +02:00
loc_port->etp_osdep.etp_state= OEPS_IDLE;
loc_port->etp_osdep.etp_flags &= ~OEPF_NEED_STAT;
2005-04-21 16:53:53 +02:00
assert(loc_port->etp_osdep.etp_stat_gid != -1);
cpf_revoke(loc_port->etp_osdep.etp_stat_gid);
loc_port->etp_osdep.etp_stat_gid= -1;
loc_port->etp_osdep.etp_stat_buf= NULL;
/* Finish ioctl */
assert(loc_port->etp_flags & EPF_GOT_ADDR);
eth_restart_ioctl(loc_port);
#if 0
if (loc_port->etp_osdep.etp_flags & OEPF_NEED_SEND)
{
printf("eth_rec(stat): OEPF_NEED_SEND is set\n");
}
if (loc_port->etp_osdep.etp_flags & OEPF_NEED_RECV)
{
printf("eth_rec(stat): OEPF_NEED_RECV is set\n");
}
if (loc_port->etp_osdep.etp_flags & OEPF_NEED_CONF)
{
printf("eth_rec(stat): OEPF_NEED_CONF is set\n");
}
#endif
#if 0
if (loc_port->etp_osdep.etp_state == OEPS_IDLE &&
(loc_port->etp_osdep.etp_flags & OEPF_NEED_CONF))
{
eth_set_rec_conf(loc_port,
loc_port->etp_osdep.etp_recvconf);
}
#endif
2005-04-21 16:53:53 +02:00
return;
}
assert(loc_port->etp_osdep.etp_state == OEPS_IDLE ||
loc_port->etp_osdep.etp_state == OEPS_RECV_SENT ||
loc_port->etp_osdep.etp_state == OEPS_SEND_SENT ||
(printf("etp_state = %d\n", loc_port->etp_osdep.etp_state), 0));
loc_port->etp_osdep.etp_state= OEPS_IDLE;
2005-04-21 16:53:53 +02:00
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
flags= m->DL_FLAGS;
2005-04-21 16:53:53 +02:00
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
if (flags & DL_PACK_SEND)
2005-04-21 16:53:53 +02:00
write_int(loc_port);
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
if (flags & DL_PACK_RECV)
2005-04-21 16:53:53 +02:00
read_int(loc_port, m->DL_COUNT);
if (loc_port->etp_osdep.etp_state == OEPS_IDLE &&
loc_port->etp_osdep.etp_flags & OEPF_NEED_SEND)
{
loc_port->etp_osdep.etp_flags &= ~OEPF_NEED_SEND;
if (loc_port->etp_wr_pack)
eth_issue_send(loc_port);
}
if (loc_port->etp_osdep.etp_state == OEPS_IDLE &&
(loc_port->etp_osdep.etp_flags & OEPF_NEED_RECV))
{
loc_port->etp_osdep.etp_flags &= ~OEPF_NEED_RECV;
if (!(loc_port->etp_flags & EPF_READ_IP))
setup_read (loc_port);
}
if (loc_port->etp_osdep.etp_flags & OEPF_NEED_CONF)
{
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
#if 0
printf("eth_rec: OEPF_NEED_CONF is set\n");
New RS and new signal handling for system processes. UPDATING INFO: 20100317: /usr/src/etc/system.conf updated to ignore default kernel calls: copy it (or merge it) to /etc/system.conf. The hello driver (/dev/hello) added to the distribution: # cd /usr/src/commands/scripts && make clean install # cd /dev && MAKEDEV hello KERNEL CHANGES: - Generic signal handling support. The kernel no longer assumes PM as a signal manager for every process. The signal manager of a given process can now be specified in its privilege slot. When a signal has to be delivered, the kernel performs the lookup and forwards the signal to the appropriate signal manager. PM is the default signal manager for user processes, RS is the default signal manager for system processes. To enable ptrace()ing for system processes, it is sufficient to change the default signal manager to PM. This will temporarily disable crash recovery, though. - sys_exit() is now split into sys_exit() (i.e. exit() for system processes, which generates a self-termination signal), and sys_clear() (i.e. used by PM to ask the kernel to clear a process slot when a process exits). - Added a new kernel call (i.e. sys_update()) to swap two process slots and implement live update. PM CHANGES: - Posix signal handling is no longer allowed for system processes. System signals are split into two fixed categories: termination and non-termination signals. When a non-termination signaled is processed, PM transforms the signal into an IPC message and delivers the message to the system process. When a termination signal is processed, PM terminates the process. - PM no longer assumes itself as the signal manager for system processes. It now makes sure that every system signal goes through the kernel before being actually processes. The kernel will then dispatch the signal to the appropriate signal manager which may or may not be PM. SYSLIB CHANGES: - Simplified SEF init and LU callbacks. - Added additional predefined SEF callbacks to debug crash recovery and live update. - Fixed a temporary ack in the SEF init protocol. SEF init reply is now completely synchronous. - Added SEF signal event type to provide a uniform interface for system processes to deal with signals. A sef_cb_signal_handler() callback is available for system processes to handle every received signal. A sef_cb_signal_manager() callback is used by signal managers to process system signals on behalf of the kernel. - Fixed a few bugs with memory mapping and DS. VM CHANGES: - Page faults and memory requests coming from the kernel are now implemented using signals. - Added a new VM call to swap two process slots and implement live update. - The call is used by RS at update time and in turn invokes the kernel call sys_update(). RS CHANGES: - RS has been reworked with a better functional decomposition. - Better kernel call masks. com.h now defines the set of very basic kernel calls every system service is allowed to use. This makes system.conf simpler and easier to maintain. In addition, this guarantees a higher level of isolation for system libraries that use one or more kernel calls internally (e.g. printf). - RS is the default signal manager for system processes. By default, RS intercepts every signal delivered to every system process. This makes crash recovery possible before bringing PM and friends in the loop. - RS now supports fast rollback when something goes wrong while initializing the new version during a live update. - Live update is now implemented by keeping the two versions side-by-side and swapping the process slots when the old version is ready to update. - Crash recovery is now implemented by keeping the two versions side-by-side and cleaning up the old version only when the recovery process is complete. DS CHANGES: - Fixed a bug when the process doing ds_publish() or ds_delete() is not known by DS. - Fixed the completely broken support for strings. String publishing is now implemented in the system library and simply wraps publishing of memory ranges. Ideally, we should adopt a similar approach for other data types as well. - Test suite fixed. DRIVER CHANGES: - The hello driver has been added to the Minix distribution to demonstrate basic live update and crash recovery functionalities. - Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
#endif
}
if (loc_port->etp_osdep.etp_state == OEPS_IDLE &&
(loc_port->etp_osdep.etp_flags & OEPF_NEED_STAT))
{
send_getstat(loc_port);
}
2005-04-21 16:53:53 +02:00
}
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
PUBLIC void eth_check_driver(char *label, endpoint_t endpoint)
{
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
int i;
eth_port_t *loc_port;
struct eth_conf *ecp;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
/* Re-init ethernet interface */
for (i= 0, ecp= eth_conf, loc_port= eth_port_table;
i<eth_conf_nr; i++, ecp++, loc_port++)
{
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
if (eth_is_vlan(ecp))
continue;
if (strcmp(ecp->ec_label, label) != 0)
{
/* Wrong driver */
continue;
}
eth_restart(loc_port, endpoint);
}
}
2005-04-21 16:53:53 +02:00
PUBLIC int eth_get_stat(eth_port, eth_stat)
eth_port_t *eth_port;
eth_stat_t *eth_stat;
{
2006-07-10 14:55:33 +02:00
cp_grant_id_t gid;
2005-04-21 16:53:53 +02:00
assert(!eth_port->etp_vlan);
if (eth_port->etp_osdep.etp_flags & OEPF_NEED_STAT)
ip_panic(( "eth_get_stat: getstat already in progress" ));
2006-07-10 14:55:33 +02:00
gid= cpf_grant_direct(eth_port->etp_osdep.etp_task,
(vir_bytes)eth_stat, sizeof(*eth_stat), CPF_WRITE);
if (gid == -1)
{
ip_panic(( "eth_get_stat: cpf_grant_direct failed: %d\n",
errno));
}
assert(eth_port->etp_osdep.etp_stat_gid == -1);
eth_port->etp_osdep.etp_stat_gid= gid;
eth_port->etp_osdep.etp_stat_buf= eth_stat;
2006-07-10 14:55:33 +02:00
if (eth_port->etp_osdep.etp_state != OEPS_IDLE)
2005-10-21 18:51:21 +02:00
{
eth_port->etp_osdep.etp_flags |= OEPF_NEED_STAT;
return SUSPEND;
2005-10-21 18:51:21 +02:00
}
send_getstat(eth_port);
2005-04-21 16:53:53 +02:00
return SUSPEND;
2005-04-21 16:53:53 +02:00
}
PUBLIC void eth_set_rec_conf (eth_port, flags)
eth_port_t *eth_port;
u32_t flags;
{
2005-10-21 18:51:21 +02:00
int r;
unsigned dl_flags, mask;
message mess;
2005-04-21 16:53:53 +02:00
assert(!eth_port->etp_vlan);
if (!(eth_port->etp_flags & EPF_GOT_ADDR))
{
/* We have never seen the device. */
#if 0
printf("eth_set_rec_conf: waiting for device to appear\n");
#endif
return;
}
if (eth_port->etp_osdep.etp_state != OEPS_IDLE)
{
#if 0
printf(
"eth_set_rec_conf: setting OEPF_NEED_CONF, state = %d\n",
eth_port->etp_osdep.etp_state);
#endif
eth_port->etp_osdep.etp_flags |= OEPF_NEED_CONF;
return;
}
mask = NWEO_EN_BROAD | NWEO_EN_MULTI | NWEO_EN_PROMISC;
if ((eth_port->etp_osdep.etp_recvconf & mask) == (flags & mask))
{
/* No change for the driver, so don't send an update */
return;
}
2005-10-21 18:51:21 +02:00
eth_port->etp_osdep.etp_recvconf= flags;
2005-04-21 16:53:53 +02:00
dl_flags= DL_NOMODE;
if (flags & NWEO_EN_BROAD)
dl_flags |= DL_BROAD_REQ;
if (flags & NWEO_EN_MULTI)
dl_flags |= DL_MULTI_REQ;
if (flags & NWEO_EN_PROMISC)
dl_flags |= DL_PROMISC_REQ;
2006-07-10 14:55:33 +02:00
mess.m_type= DL_CONF;
2005-04-21 16:53:53 +02:00
mess.DL_MODE= dl_flags;
assert(eth_port->etp_osdep.etp_state == OEPS_IDLE);
r= asynsend(eth_port->etp_osdep.etp_task, &mess);
eth_port->etp_osdep.etp_state= OEPS_CONF_SENT;
if (r < 0)
2005-04-21 16:53:53 +02:00
{
printf("eth_set_rec_conf: asynsend to %d failed: %d\n",
eth_port->etp_osdep.etp_task, r);
return;
}
}
PRIVATE void eth_issue_send(eth_port)
eth_port_t *eth_port;
{
int i, r, pack_size;
acc_t *pack, *pack_ptr;
iovec_s_t *iovec;
message m;
iovec= eth_port->etp_osdep.etp_wr_iovec;
pack= eth_port->etp_wr_pack;
pack_size= 0;
for (i=0, pack_ptr= pack; i<IOVEC_NR && pack_ptr; i++,
pack_ptr= pack_ptr->acc_next)
{
r= cpf_setgrant_direct(iovec[i].iov_grant,
eth_port->etp_osdep.etp_task,
(vir_bytes)ptr2acc_data(pack_ptr),
(vir_bytes)pack_ptr->acc_length,
CPF_READ);
if (r != 0)
2005-04-21 16:53:53 +02:00
{
ip_panic((
"eth_write_port: cpf_setgrant_direct failed: %d\n",
errno));
}
pack_size += iovec[i].iov_size= pack_ptr->acc_length;
}
if (i>= IOVEC_NR)
{
pack= bf_pack(pack); /* packet is too fragmented */
eth_port->etp_wr_pack= pack;
pack_size= 0;
for (i=0, pack_ptr= pack; i<IOVEC_NR && pack_ptr;
i++, pack_ptr= pack_ptr->acc_next)
{
r= cpf_setgrant_direct(iovec[i].iov_grant,
eth_port->etp_osdep.etp_task,
(vir_bytes)ptr2acc_data(pack_ptr),
(vir_bytes)pack_ptr->acc_length,
CPF_READ);
if (r != 0)
2005-04-21 16:53:53 +02:00
{
ip_panic((
"eth_write_port: cpf_setgrant_direct failed: %d\n",
errno));
2005-04-21 16:53:53 +02:00
}
pack_size += iovec[i].iov_size= pack_ptr->acc_length;
2005-04-21 16:53:53 +02:00
}
}
assert (i< IOVEC_NR);
assert (pack_size >= ETH_MIN_PACK_SIZE);
r= cpf_setgrant_direct(eth_port->etp_osdep.etp_wr_vec_grant,
eth_port->etp_osdep.etp_task,
(vir_bytes)iovec,
(vir_bytes)(i * sizeof(iovec[0])),
CPF_READ);
if (r != 0)
2005-10-21 18:51:21 +02:00
{
ip_panic((
"eth_write_port: cpf_setgrant_direct failed: %d\n",
errno));
2005-10-21 18:51:21 +02:00
}
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
m.m_type= DL_WRITEV_S;
m.DL_COUNT= i;
m.DL_GRANT= eth_port->etp_osdep.etp_wr_vec_grant;
assert(eth_port->etp_osdep.etp_state == OEPS_IDLE);
r= asynsend(eth_port->etp_osdep.etp_task, &m);
2005-04-21 16:53:53 +02:00
if (r < 0)
2005-04-21 16:53:53 +02:00
{
printf("eth_issue_send: send to %d failed: %d\n",
eth_port->etp_osdep.etp_task, r);
return;
2005-04-21 16:53:53 +02:00
}
eth_port->etp_osdep.etp_state= OEPS_SEND_SENT;
2005-04-21 16:53:53 +02:00
}
PRIVATE void write_int(eth_port_t *eth_port)
2005-04-21 16:53:53 +02:00
{
acc_t *pack;
int multicast;
u8_t *eth_dst_ptr;
pack= eth_port->etp_wr_pack;
if (pack == NULL)
{
printf("write_int: strange no packet on eth port %d\n",
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
(int)(eth_port-eth_port_table));
eth_restart_write(eth_port);
return;
}
2005-04-21 16:53:53 +02:00
eth_port->etp_wr_pack= NULL;
eth_dst_ptr= (u8_t *)ptr2acc_data(pack);
multicast= (*eth_dst_ptr & 1); /* low order bit indicates multicast */
if (multicast || (eth_port->etp_osdep.etp_recvconf & NWEO_EN_PROMISC))
{
assert(!no_ethWritePort);
no_ethWritePort= 1;
2005-04-21 16:53:53 +02:00
eth_arrive(eth_port, pack, bf_bufsize(pack));
assert(no_ethWritePort);
no_ethWritePort= 0;
}
2005-04-21 16:53:53 +02:00
else
bf_afree(pack);
eth_restart_write(eth_port);
}
PRIVATE void read_int(eth_port, count)
eth_port_t *eth_port;
int count;
{
acc_t *pack, *pack_ptr, *cut_pack;
iovec_s_t *iovec;
int i, r;
/* A buggy driver might try to feed us a reply for a request we never
* sent. Don't let this cause a crash further up.
*/
if (!(eth_port->etp_flags & EPF_READ_IP))
{
printf("mnx_eth`read_int: read reply with no read going on\n");
return;
}
2005-04-21 16:53:53 +02:00
pack= eth_port->etp_rd_pack;
eth_port->etp_rd_pack= NULL;
/* Invalidate the grants first, so that the ethernet driver can no
* longer modify the contents of the packet.
*/
iovec= eth_port->etp_osdep.etp_rd_iovec;
for (i=0, pack_ptr= pack; i<RD_IOVEC && pack_ptr;
i++, pack_ptr= pack_ptr->acc_next)
{
r= cpf_setgrant_disable(iovec[i].iov_grant);
if (r != 0)
{
ip_panic((
"mnx_eth`read_int: cpf_setgrant_disable failed: %d\n",
errno));
}
}
if (count < ETH_MIN_PACK_SIZE)
{
printf("mnx_eth`read_int: packet size too small (%d)\n",
count);
bf_afree(pack);
}
else if (count > ETH_MAX_PACK_SIZE_TAGGED)
{
printf("mnx_eth`read_int: packet size too big (%d)\n",
count);
bf_afree(pack);
}
else
{
cut_pack= bf_cut(pack, 0, count);
bf_afree(pack);
2005-04-21 16:53:53 +02:00
assert(!no_ethWritePort);
no_ethWritePort= 1;
eth_arrive(eth_port, cut_pack, count);
assert(no_ethWritePort);
no_ethWritePort= 0;
}
2005-04-21 16:53:53 +02:00
eth_port->etp_flags &= ~(EPF_READ_IP|EPF_READ_SP);
setup_read(eth_port);
}
PRIVATE void setup_read(eth_port)
eth_port_t *eth_port;
{
acc_t *pack, *pack_ptr;
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
message mess;
2006-07-10 14:55:33 +02:00
iovec_s_t *iovec;
2005-04-21 16:53:53 +02:00
int i, r;
assert(!eth_port->etp_vlan);
2005-04-21 16:53:53 +02:00
assert(!(eth_port->etp_flags & (EPF_READ_IP|EPF_READ_SP)));
if (eth_port->etp_osdep.etp_state != OEPS_IDLE)
2005-04-21 16:53:53 +02:00
{
eth_port->etp_osdep.etp_flags |= OEPF_NEED_RECV;
2005-04-21 16:53:53 +02:00
return;
}
2005-04-21 16:53:53 +02:00
assert (!eth_port->etp_rd_pack);
2005-04-21 16:53:53 +02:00
iovec= eth_port->etp_osdep.etp_rd_iovec;
pack= bf_memreq (ETH_MAX_PACK_SIZE_TAGGED);
for (i=0, pack_ptr= pack; i<RD_IOVEC && pack_ptr;
i++, pack_ptr= pack_ptr->acc_next)
{
r= cpf_setgrant_direct(iovec[i].iov_grant,
2006-07-10 14:55:33 +02:00
eth_port->etp_osdep.etp_task,
(vir_bytes)ptr2acc_data(pack_ptr),
(vir_bytes)pack_ptr->acc_length,
CPF_WRITE);
2006-07-10 14:55:33 +02:00
if (r != 0)
{
ip_panic((
"mnx_eth`setup_read: cpf_setgrant_direct failed: %d\n",
errno));
}
iovec[i].iov_size= (vir_bytes)pack_ptr->acc_length;
}
assert (!pack_ptr);
2006-07-10 14:55:33 +02:00
r= cpf_setgrant_direct(eth_port->etp_osdep.etp_rd_vec_grant,
eth_port->etp_osdep.etp_task,
(vir_bytes)iovec,
(vir_bytes)(i * sizeof(iovec[0])),
CPF_READ);
if (r != 0)
{
ip_panic((
"mnx_eth`setup_read: cpf_setgrant_direct failed: %d\n",
errno));
}
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
mess.m_type= DL_READV_S;
mess.DL_COUNT= i;
mess.DL_GRANT= eth_port->etp_osdep.etp_rd_vec_grant;
2005-04-21 16:53:53 +02:00
assert(eth_port->etp_osdep.etp_state == OEPS_IDLE);
This patch switches the MINIX3 ethernet driver stack from a port-based model to an instance-based model. Each ethernet driver instance is now responsible for exactly one network interface card. The port field in /etc/inet.conf now acts as an instance field instead. This patch also updates the data link protocol. This update: - eliminates the concept of ports entirely; - eliminates DL_GETNAME entirely; - standardizes on using m_source for IPC and DL_ENDPT for safecopies; - removes error codes from TASK/STAT replies, as they were unused; - removes a number of other old or unused fields; - names and renames a few other fields. All ethernet drivers have been changed to: - conform to the new protocol, and exactly that; - take on an instance number based on a given "instance" argument; - skip that number of PCI devices in probe iterations; - use config tables and environment variables based on that number; - no longer be limited to a predefined maximum of cards in any way; - get rid of any leftover non-safecopy support and other ancient junk; - have a correct banner protocol figure, or none at all. Other changes: * Inet.conf is now taken to be line-based, and supports #-comments. No existing installations are expected to be affected by this. * A new, select-based asynchio library replaces the old one. Kindly contributed by Kees J. Bot. * Inet now supports use of select() on IP devices. Combined, the last two changes together speed up dhcpd considerably in the presence of multiple interfaces. * A small bug has been fixed in nonamed.
2010-05-18 00:22:53 +02:00
r= asynsend(eth_port->etp_osdep.etp_task, &mess);
eth_port->etp_osdep.etp_state= OEPS_RECV_SENT;
2005-04-21 16:53:53 +02:00
if (r < 0)
{
printf(
"mnx_eth`setup_read: asynsend to %d failed: %d\n",
eth_port->etp_osdep.etp_task, r);
}
eth_port->etp_rd_pack= pack;
eth_port->etp_flags |= EPF_READ_IP;
2005-04-21 16:53:53 +02:00
eth_port->etp_flags |= EPF_READ_SP;
}
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
static void eth_restart(eth_port_t *eth_port, endpoint_t endpoint)
{
int r;
2005-10-21 18:51:21 +02:00
unsigned flags, dl_flags;
cp_grant_id_t gid;
message mess;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
eth_port->etp_osdep.etp_task= endpoint;
switch(eth_port->etp_osdep.etp_state)
{
case OEPS_INIT:
case OEPS_CONF_SENT:
case OEPS_RECV_SENT:
case OEPS_SEND_SENT:
/* We can safely ignore the pending CONF, RECV, and SEND
* requests. If this is the first time that we see this
* driver at all, that's fine too.
*/
eth_port->etp_osdep.etp_state= OEPS_IDLE;
break;
case OEPS_GETSTAT_SENT:
/* Set the OEPF_NEED_STAT to trigger a new request */
eth_port->etp_osdep.etp_flags |= OEPF_NEED_STAT;
eth_port->etp_osdep.etp_state= OEPS_IDLE;
break;
}
/* If there is a pending GETSTAT request then we have to create a
* new grant.
*/
if (eth_port->etp_osdep.etp_flags & OEPF_NEED_STAT)
{
assert(eth_port->etp_osdep.etp_stat_gid != -1);
cpf_revoke(eth_port->etp_osdep.etp_stat_gid);
gid= cpf_grant_direct(eth_port->etp_osdep.etp_task,
(vir_bytes)eth_port->etp_osdep.etp_stat_buf,
sizeof(*eth_port->etp_osdep.etp_stat_buf), CPF_WRITE);
if (gid == -1)
{
ip_panic((
"eth_restart: cpf_grant_direct failed: %d\n",
errno));
}
eth_port->etp_osdep.etp_stat_gid= gid;
}
2005-10-21 18:51:21 +02:00
flags= eth_port->etp_osdep.etp_recvconf;
dl_flags= DL_NOMODE;
if (flags & NWEO_EN_BROAD)
dl_flags |= DL_BROAD_REQ;
if (flags & NWEO_EN_MULTI)
dl_flags |= DL_MULTI_REQ;
if (flags & NWEO_EN_PROMISC)
dl_flags |= DL_PROMISC_REQ;
2006-07-10 14:55:33 +02:00
mess.m_type= DL_CONF;
2005-10-21 18:51:21 +02:00
mess.DL_MODE= dl_flags;
compare(eth_port->etp_osdep.etp_state, ==, OEPS_IDLE);
r= asynsend(eth_port->etp_osdep.etp_task, &mess);
if (r<0)
{
printf(
"eth_restart: send to ethernet task %d failed: %d\n",
2005-10-21 18:51:21 +02:00
eth_port->etp_osdep.etp_task, r);
return;
}
eth_port->etp_osdep.etp_state= OEPS_CONF_SENT;
if (eth_port->etp_wr_pack)
2005-10-21 18:51:21 +02:00
{
bf_afree(eth_port->etp_wr_pack);
eth_port->etp_wr_pack= NULL;
eth_restart_write(eth_port);
}
if (eth_port->etp_rd_pack)
2005-10-21 18:51:21 +02:00
{
bf_afree(eth_port->etp_rd_pack);
eth_port->etp_rd_pack= NULL;
eth_port->etp_flags &= ~(EPF_READ_IP|EPF_READ_SP);
}
}
PRIVATE void send_getstat(eth_port)
eth_port_t *eth_port;
{
int r;
message mess;
mess.m_type= DL_GETSTAT_S;
mess.DL_GRANT= eth_port->etp_osdep.etp_stat_gid;
assert(eth_port->etp_osdep.etp_state == OEPS_IDLE);
r= asynsend(eth_port->etp_osdep.etp_task, &mess);
eth_port->etp_osdep.etp_state= OEPS_GETSTAT_SENT;
if (r != OK)
ip_panic(( "eth_get_stat: asynsend failed: %d", r));
}
2005-04-21 16:53:53 +02:00
/*
* $PchId: mnx_eth.c,v 1.16 2005/06/28 14:24:37 philip Exp $
2005-04-21 16:53:53 +02:00
*/