minix/sys/arch/i386/stand/lib/netif/3c90xb.c

450 lines
10 KiB
C
Raw Normal View History

/* $NetBSD: 3c90xb.c,v 1.14 2008/12/14 18:46:33 christos Exp $ */
/*
* Copyright (c) 1999
* Matthias Drochner. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/types.h>
#include <machine/pio.h>
struct mbuf; /* XXX */
typedef int bus_dmamap_t; /* XXX */
#include <dev/ic/elink3reg.h>
#include <dev/ic/elinkxlreg.h>
#include <lib/libsa/stand.h>
#include <libi386.h>
#include <pcivar.h>
#if defined(_STANDALONE) && !defined(SUPPORT_NO_NETBSD)
#include <lib/libkern/libkern.h>
#include <bootinfo.h>
#endif
#include "etherdrv.h"
#define RECVBUF_SIZE 1600 /* struct ex_upd + packet */
#ifdef _STANDALONE
static pcihdl_t mytag;
static char recvbuf[RECVBUF_SIZE];
#define RECVBUF_PHYS vtophys(recvbuf)
#define RECVBUF_VIRT ((void *)recvbuf)
static struct ex_dpd sndbuf;
#define SNDBUF_PHYS vtophys(&sndbuf)
#define SNDBUF_VIRT ((void *)&sndbuf)
#else /* !standalone, userspace testing environment */
#define PCI_MODE1_ENABLE 0x80000000UL
#define PCIBUSNO 1
#define PCIDEVNO 4
static pcihdl_t mytag = PCI_MODE1_ENABLE | (PCIBUSNO << 16) | (PCIDEVNO << 11);
extern void *mapmem(int, int);
void *dmamem; /* virtual */
#define DMABASE 0x3ffd800
#define DMASIZE 10240
#define RECVBUF_PHYS DMABASE
#define RECVBUF_VIRT dmamem
#define SNDBUF_PHYS (DMABASE + RECVBUF_SIZE)
#define SNDBUF_VIRT ((void *)(((char *)dmamem) + RECVBUF_SIZE))
#endif /* _STANDALONE */
#define CSR_READ_1(reg) inb(iobase + (reg))
#define CSR_READ_2(reg) inw(iobase + (reg))
#define CSR_READ_4(reg) inl(iobase + (reg))
#define CSR_WRITE_1(reg, val) outb(iobase + (reg), val)
#define CSR_WRITE_2(reg, val) outw(iobase + (reg), val)
#define CSR_WRITE_4(reg, val) outl(iobase + (reg), val)
#undef GO_WINDOW
#define GO_WINDOW(x) CSR_WRITE_2(ELINK_COMMAND, WINDOW_SELECT | x)
static int iobase;
static u_char myethaddr[6];
unsigned ether_medium;
static struct {
int did;
int mii;
} excards[] = {
{0x9005, 0}, /* 3c900b Combo */
{0x9055, 1}, /* 3c905b TP */
{0x9058, 0}, /* 3c905b Combo */
{-1}
}, *excard;
static struct mtabentry {
int address_cfg; /* configured connector */
int config_bit; /* connector present */
char *name;
} mediatab[] = { /* indexed by media type - etherdrv.h */
{ELINKMEDIA_10BASE_2, ELINK_PCI_BNC, "BNC"},
{ELINKMEDIA_10BASE_T, ELINK_PCI_10BASE_T, "UTP"},
{ELINKMEDIA_AUI, ELINK_PCI_AUI, "AUI"},
{ELINKMEDIA_MII, ELINK_PCI_100BASE_MII, "MII"},
{ELINKMEDIA_100BASE_TX, ELINK_PCI_100BASE_TX, "100TX"},
};
#if defined(_STANDALONE) && !defined(SUPPORT_NO_NETBSD)
static struct btinfo_netif bi_netif;
#endif
#define ex_waitcmd() \
do { \
while (CSR_READ_2(ELINK_STATUS) & COMMAND_IN_PROGRESS) \
continue; \
} while (0)
void ex_reset(void);
uint16_t ex_read_eeprom(int);
static int ex_eeprom_busy(void);
void ex_init(void);
void ex_set_media(void);
void
ex_reset(void)
{
CSR_WRITE_2(ELINK_COMMAND, GLOBAL_RESET);
delay(100000);
ex_waitcmd();
}
/*
* Read EEPROM data.
* XXX what to do if EEPROM doesn't unbusy?
*/
uint16_t
ex_read_eeprom(int offset)
{
uint16_t data = 0;
GO_WINDOW(0);
if (ex_eeprom_busy())
goto out;
CSR_WRITE_1(ELINK_W0_EEPROM_COMMAND, READ_EEPROM | (offset & 0x3f));
if (ex_eeprom_busy())
goto out;
data = CSR_READ_2(ELINK_W0_EEPROM_DATA);
out:
return data;
}
static int
ex_eeprom_busy(void)
{
int i = 100;
while (i--) {
if (!(CSR_READ_2(ELINK_W0_EEPROM_COMMAND) & EEPROM_BUSY))
return 0;
delay(100);
}
printf("\nex: eeprom stays busy.\n");
return 1;
}
/*
* Bring device up.
*/
void
ex_init(void)
{
int i;
ex_waitcmd();
EtherStop();
/*
* Set the station address and clear the station mask. The latter
* is needed for 90x cards, 0 is the default for 90xB cards.
*/
GO_WINDOW(2);
for (i = 0; i < 6; i++) {
CSR_WRITE_1(ELINK_W2_ADDR_0 + i,
myethaddr[i]);
CSR_WRITE_1(ELINK_W2_RECVMASK_0 + i, 0);
}
GO_WINDOW(3);
CSR_WRITE_2(ELINK_COMMAND, RX_RESET);
ex_waitcmd();
CSR_WRITE_2(ELINK_COMMAND, TX_RESET);
ex_waitcmd();
CSR_WRITE_2(ELINK_COMMAND, SET_INTR_MASK | 0); /* disable */
CSR_WRITE_2(ELINK_COMMAND, ACK_INTR | 0xff);
ex_set_media();
CSR_WRITE_2(ELINK_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST);
CSR_WRITE_4(ELINK_DNLISTPTR, 0);
CSR_WRITE_2(ELINK_COMMAND, TX_ENABLE);
CSR_WRITE_4(ELINK_UPLISTPTR, RECVBUF_PHYS);
CSR_WRITE_2(ELINK_COMMAND, RX_ENABLE);
CSR_WRITE_2(ELINK_COMMAND, ELINK_UPUNSTALL);
GO_WINDOW(1);
}
void
ex_set_media(void)
{
int config0, config1;
CSR_WRITE_2(ELINK_W3_MAC_CONTROL, 0);
if (ether_medium == ETHERMEDIUM_MII)
goto setcfg;
GO_WINDOW(4);
CSR_WRITE_2(ELINK_W4_MEDIA_TYPE, 0);
CSR_WRITE_2(ELINK_COMMAND, STOP_TRANSCEIVER);
delay(800);
switch (ether_medium) {
case ETHERMEDIUM_UTP:
CSR_WRITE_2(ELINK_W4_MEDIA_TYPE,
JABBER_GUARD_ENABLE | LINKBEAT_ENABLE);
break;
case ETHERMEDIUM_BNC:
CSR_WRITE_2(ELINK_COMMAND, START_TRANSCEIVER);
delay(800);
break;
case ETHERMEDIUM_AUI:
CSR_WRITE_2(ELINK_W4_MEDIA_TYPE, SQE_ENABLE);
delay(800);
break;
case ETHERMEDIUM_100TX:
CSR_WRITE_2(ELINK_W4_MEDIA_TYPE, LINKBEAT_ENABLE);
break;
}
setcfg:
GO_WINDOW(3);
config0 = CSR_READ_2(ELINK_W3_INTERNAL_CONFIG);
config1 = CSR_READ_2(ELINK_W3_INTERNAL_CONFIG + 2);
config1 = config1 & ~CONFIG_MEDIAMASK;
config1 |= (mediatab[ether_medium].address_cfg
<< CONFIG_MEDIAMASK_SHIFT);
CSR_WRITE_2(ELINK_W3_INTERNAL_CONFIG, config0);
CSR_WRITE_2(ELINK_W3_INTERNAL_CONFIG + 2, config1);
}
static void
ex_probemedia(void)
{
int i, j;
struct mtabentry *m;
/* test for presence of connectors */
GO_WINDOW(3);
i = CSR_READ_1(ELINK_W3_RESET_OPTIONS);
j = (CSR_READ_2(ELINK_W3_INTERNAL_CONFIG + 2) & CONFIG_MEDIAMASK)
>> CONFIG_MEDIAMASK_SHIFT;
GO_WINDOW(0);
for (ether_medium = 0, m = mediatab;
ether_medium < sizeof(mediatab) / sizeof(mediatab[0]);
ether_medium++, m++) {
if (j == m->address_cfg) {
if (!(i & m->config_bit)) {
printf("%s not present\n", m->name);
goto bad;
}
printf("using %s\n", m->name);
return;
}
}
printf("unknown connector\n");
bad:
ether_medium = -1;
}
int
EtherInit(unsigned char *myadr)
{
uint32_t pcicsr;
uint16_t val;
volatile struct ex_upd *upd;
#ifndef _STANDALONE
uint32_t id;
#endif
if (pcicheck()) {
printf("pcicheck failed\n");
return 0;
}
#ifndef _STANDALONE
pcicfgread(&mytag, 0, &id);
#endif
for (excard = &excards[0]; excard->did != -1; excard++) {
#ifdef _STANDALONE
if (pcifinddev(0x10b7, excard->did, &mytag) == 0)
goto found;
#else
if (id == (0x10b7 | (excard->did << 16)))
goto found;
#endif
}
printf("no ex\n");
return 0;
found:
pcicfgread(&mytag, 0x10, &iobase);
iobase &= ~3;
#ifndef _STANDALONE
dmamem = mapmem(DMABASE, DMASIZE);
if (!dmamem)
return 0;
#endif
/* enable bus mastering in PCI command register */
if (pcicfgread(&mytag, 0x04, (int *)&pcicsr)
|| pcicfgwrite(&mytag, 0x04, pcicsr | 4)) {
printf("cannot enable DMA\n");
return 0;
}
ex_reset();
if (excard->mii)
ether_medium = ETHERMEDIUM_MII;
else {
ex_probemedia();
if (ether_medium < 0)
return 0;
}
val = ex_read_eeprom(EEPROM_OEM_ADDR0);
myethaddr[0] = val >> 8;
myethaddr[1] = val & 0xff;
val = ex_read_eeprom(EEPROM_OEM_ADDR1);
myethaddr[2] = val >> 8;
myethaddr[3] = val & 0xff;
val = ex_read_eeprom(EEPROM_OEM_ADDR2);
myethaddr[4] = val >> 8;
myethaddr[5] = val & 0xff;
memcpy(myadr, myethaddr, 6);
upd = RECVBUF_VIRT;
upd->upd_nextptr = RECVBUF_PHYS;
upd->upd_pktstatus = 1500;
upd->upd_frags[0].fr_addr = RECVBUF_PHYS + 100;
upd->upd_frags[0].fr_len = 1500 | EX_FR_LAST;
ex_init();
#if defined(_STANDALONE) && !defined(SUPPORT_NO_NETBSD)
strncpy(bi_netif.ifname, "ex", sizeof(bi_netif.ifname));
bi_netif.bus = BI_BUS_PCI;
bi_netif.addr.tag = mytag;
BI_ADD(&bi_netif, BTINFO_NETIF, sizeof(bi_netif));
#endif
return 1;
}
void
EtherStop(void)
{
/*
* Issue software reset
*/
CSR_WRITE_2(ELINK_COMMAND, RX_DISABLE);
CSR_WRITE_2(ELINK_COMMAND, TX_DISABLE);
CSR_WRITE_2(ELINK_COMMAND, STOP_TRANSCEIVER);
CSR_WRITE_2(ELINK_COMMAND, INTR_LATCH);
}
int
EtherSend(char *pkt, int len)
{
volatile struct ex_dpd *dpd;
int i;
dpd = SNDBUF_VIRT;
dpd->dpd_nextptr = 0;
dpd->dpd_fsh = len;
#ifdef _STANDALONE
dpd->dpd_frags[0].fr_addr = vtophys(pkt);
#else
memcpy(SNDBUF_VIRT + 100, pkt, len);
dpd->dpd_frags[0].fr_addr = SNDBUF_PHYS + 100;
#endif
dpd->dpd_frags[0].fr_len = len | EX_FR_LAST;
CSR_WRITE_4(ELINK_DNLISTPTR, SNDBUF_PHYS);
CSR_WRITE_2(ELINK_COMMAND, ELINK_DNUNSTALL);
i = 10000;
while (!(dpd->dpd_fsh & 0x00010000)) {
if (--i < 0) {
printf("3c90xb: send timeout\n");
return -1;
}
delay(1);
}
return len;
}
int
EtherReceive(char *pkt, int maxlen)
{
volatile struct ex_upd *upd;
int len;
upd = RECVBUF_VIRT;
if (!(upd->upd_pktstatus & ~EX_UPD_PKTLENMASK))
return 0;
len = upd->upd_pktstatus & EX_UPD_PKTLENMASK;
if (len > maxlen)
len = 0;
else
memcpy(pkt, RECVBUF_VIRT + 100, len);
upd->upd_pktstatus = 1500;
CSR_WRITE_2(ELINK_COMMAND, ELINK_UPUNSTALL);
return len;
}