minix/kernel/arch/i386/mpx386.S

620 lines
16 KiB
ArmAsm
Raw Normal View History

Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
/*
* This file, mpx386.s, is included by mpx.s when Minix is compiled for
* 32-bit Intel CPUs. The alternative mpx88.s is compiled for 16-bit CPUs.
*
* This file is part of the lowest layer of the MINIX kernel. (The other part
* is "proc.c".) The lowest layer does process switching and message handling.
* Furthermore it contains the assembler startup code for Minix and the 32-bit
* interrupt handlers. It cooperates with the code in "start.c" to set up a
* good environment for main().
*
* Every transition to the kernel goes through this file. Transitions to the
* kernel may be nested. The initial entry may be with a system call (i.e.,
* send or receive a message), an exception or a hardware interrupt; kernel
* reentries may only be made by hardware interrupts. The count of reentries
* is kept in "k_reenter". It is important for deciding whether to switch to
* the kernel stack and for protecting the message passing code in "proc.c".
*
* For the message passing trap, most of the machine state is saved in the
* proc table. (Some of the registers need not be saved.) Then the stack is
* switched to "k_stack", and interrupts are reenabled. Finally, the system
* call handler (in C) is called. When it returns, interrupts are disabled
* again and the code falls into the restart routine, to finish off held-up
* interrupts and run the process or task whose pointer is in "proc_ptr".
*
* Hardware interrupt handlers do the same, except (1) The entire state must
* be saved. (2) There are too many handlers to do this inline, so the save
* routine is called. A few cycles are saved by pushing the address of the
* appropiate restart routine for a return later. (3) A stack switch is
* avoided when the stack is already switched. (4) The (master) 8259 interrupt
* controller is reenabled centrally in save(). (5) Each interrupt handler
* masks its interrupt line using the 8259 before enabling (other unmasked)
* interrupts, and unmasks it after servicing the interrupt. This limits the
* nest level to the number of lines and protects the handler from itself.
*
* For communication with the boot monitor at startup time some constant
* data are compiled into the beginning of the text segment. This facilitates
* reading the data at the start of the boot process, since only the first
* sector of the file needs to be read.
*
* Some data storage is also allocated at the end of this file. This data
* will be at the start of the data segment of the kernel and will be read
* and modified by the boot monitor before the kernel starts.
*/
/* sections */
#include <sys/vm_i386.h>
#ifdef __ACK__
.text
begtext:
#ifdef __ACK__
.rom
#else
.data
#endif
begrom:
.data
begdata:
.bss
begbss:
#endif
#include <minix/config.h>
#include <minix/const.h>
#include <minix/com.h>
#include <ibm/interrupt.h>
#include <archconst.h>
#include "../../const.h"
#include "sconst.h"
/* Selected 386 tss offsets. */
#define TSS3_S_SP0 4
/*
* Exported functions
* Note: in assembly language the .define statement applied to a function name
* is loosely equivalent to a prototype in C code -- it makes it possible to
* link to an entity declared in the assembly code but does not create
* the entity.
*/
.globl restart
.globl reload_cr3
.globl write_cr3
.globl divide_error
.globl single_step_exception
.globl nmi
.globl breakpoint_exception
.globl overflow
.globl bounds_check
.globl inval_opcode
.globl copr_not_available
.globl double_fault
.globl copr_seg_overrun
.globl inval_tss
.globl segment_not_present
.globl stack_exception
.globl general_protection
.globl page_fault
.globl copr_error
.globl params_size
.globl params_offset
.globl mon_ds
.globl schedcheck
.globl dirtypde
.globl hwint00 /* handlers for hardware interrupts */
.globl hwint01
.globl hwint02
.globl hwint03
.globl hwint04
.globl hwint05
.globl hwint06
.globl hwint07
.globl hwint08
.globl hwint09
.globl hwint10
.globl hwint11
.globl hwint12
.globl hwint13
.globl hwint14
.globl hwint15
.globl level0_call
/* Exported variables. */
.globl begbss
.globl begdata
.text
/*===========================================================================*/
/* MINIX */
/*===========================================================================*/
.global MINIX
MINIX:
/* this is the entry point for the MINIX kernel */
jmp over_flags /* skip over the next few bytes */
.short CLICK_SHIFT /* for the monitor: memory granularity */
flags:
/* boot monitor flags:
* call in 386 mode, make bss, make stack,
* load high, don't patch, will return,
* uses generic INT, memory vector,
* new boot code return
*/
.short 0x01FD
nop /* extra byte to sync up disassembler */
over_flags:
/* Set up a C stack frame on the monitor stack. (The monitor sets cs and ds */
/* right. The ss descriptor still references the monitor data segment.) */
movzwl %sp, %esp /* monitor stack is a 16 bit stack */
push %ebp
mov %esp, %ebp
push %esi
push %edi
cmp $0, 4(%ebp) /* monitor return vector is */
je noret /* nonzero if return possible */
incl mon_return
noret:
movl %esp, mon_sp /* save stack pointer for later return */
/* Copy the monitor global descriptor table to the address space of kernel and */
/* switch over to it. Prot_init() can then update it with immediate effect. */
sgdt gdt+GDT_SELECTOR /* get the monitor gdtr */
movl gdt+GDT_SELECTOR+2, %esi /* absolute address of GDT */
mov $gdt, %ebx /* address of kernel GDT */
mov $8*8, %ecx /* copying eight descriptors */
copygdt:
movb %es:(%esi), %al
movb %al, (%ebx)
inc %esi
inc %ebx
loop copygdt
movl gdt+DS_SELECTOR+2, %eax /* base of kernel data */
and $0x00FFFFFF, %eax /* only 24 bits */
add $gdt, %eax /* eax = vir2phys(gdt) */
movl %eax, gdt+GDT_SELECTOR+2 /* set base of GDT */
lgdt gdt+GDT_SELECTOR /* switch over to kernel GDT */
/* Locate boot parameters, set up kernel segment registers and stack. */
mov 8(%ebp), %ebx /* boot parameters offset */
mov 12(%ebp), %edx /* boot parameters length */
mov 16(%ebp), %eax /* address of a.out headers */
movl %eax, aout
mov %ds, %ax /* kernel data */
mov %ax, %es
mov %ax, %fs
mov %ax, %gs
mov %ax, %ss
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
mov $k_boot_stktop, %esp /* set sp to point to the top of kernel stack */
/* Save boot parameters into these global variables for i386 code */
movl %edx, params_size
movl %ebx, params_offset
movl $SS_SELECTOR, mon_ds
/* Call C startup code to set up a proper environment to run main(). */
push %edx
push %ebx
push $SS_SELECTOR
push $DS_SELECTOR
push $CS_SELECTOR
call cstart /* cstart(cs, ds, mds, parmoff, parmlen) */
add $5*4, %esp
/* Reload gdtr, idtr and the segment registers to global descriptor table set */
/* up by prot_init(). */
lgdt gdt+GDT_SELECTOR
lidt gdt+IDT_SELECTOR
ljmp $CS_SELECTOR, $csinit
csinit:
movw $DS_SELECTOR, %ax
mov %ax, %ds
mov %ax, %es
mov %ax, %fs
mov %ax, %gs
mov %ax, %ss
movw $TSS_SELECTOR, %ax /* no other TSS is used */
ltr %ax
push $0 /* set flags to known good state */
popf /* esp, clear nested task and int enable */
jmp main /* main() */
/*===========================================================================*/
/* interrupt handlers */
/* interrupt handlers for 386 32-bit protected mode */
/*===========================================================================*/
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
#define PIC_IRQ_HANDLER(irq) \
push $irq ;\
call irq_handle /* intr_handle(irq_handlers[irq]) */ ;\
add $4, %esp ;
/*===========================================================================*/
/* hwint00 - 07 */
/*===========================================================================*/
/* Note this is a macro, it just looks like a subroutine. */
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
#define hwint_master(irq) \
TEST_INT_IN_KERNEL(4, 0f) ;\
\
SAVE_PROCESS_CTX(0) ;\
movl $0, %ebp /* for stack trace */ ;\
PIC_IRQ_HANDLER(irq) ;\
movb $END_OF_INT, %al ;\
outb $INT_CTL /* reenable interrupts in master pic */ ;\
jmp restart ;\
\
0: \
pusha ;\
PIC_IRQ_HANDLER(irq) ;\
movb $END_OF_INT, %al ;\
outb $INT_CTL /* reenable interrupts in master pic */ ;\
popa ;\
iret ;
/* Each of these entry points is an expansion of the hwint_master macro */
.balign 16
hwint00:
/* Interrupt routine for irq 0 (the clock). */
hwint_master(0)
.balign 16
hwint01:
/* Interrupt routine for irq 1 (keyboard) */
hwint_master(1)
.balign 16
hwint02:
/* Interrupt routine for irq 2 (cascade!) */
hwint_master(2)
.balign 16
hwint03:
/* Interrupt routine for irq 3 (second serial) */
hwint_master(3)
.balign 16
hwint04:
/* Interrupt routine for irq 4 (first serial) */
hwint_master(4)
.balign 16
hwint05:
/* Interrupt routine for irq 5 (XT winchester) */
hwint_master(5)
.balign 16
hwint06:
/* Interrupt routine for irq 6 (floppy) */
hwint_master(6)
.balign 16
hwint07:
/* Interrupt routine for irq 7 (printer) */
hwint_master(7)
/*===========================================================================*/
/* hwint08 - 15 */
/*===========================================================================*/
/* Note this is a macro, it just looks like a subroutine. */
#define hwint_slave(irq) \
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
TEST_INT_IN_KERNEL(4, 0f) ;\
\
SAVE_PROCESS_CTX(0) ;\
movl $0, %ebp /* for stack trace */ ;\
PIC_IRQ_HANDLER(irq) ;\
movb $END_OF_INT, %al ;\
outb $INT_CTL /* reenable interrupts in master pic */ ;\
outb $INT2_CTL /* reenable slave 8259 */ ;\
jmp restart ;\
\
0: \
pusha ;\
PIC_IRQ_HANDLER(irq) ;\
movb $END_OF_INT, %al ;\
outb $INT_CTL /* reenable interrupts in master pic */ ;\
outb $INT2_CTL /* reenable slave 8259 */ ;\
popa ;\
iret ;
/* Each of these entry points is an expansion of the hwint_slave macro */
.balign 16
hwint08:
/* Interrupt routine for irq 8 (realtime clock) */
hwint_slave(8)
.balign 16
hwint09:
/* Interrupt routine for irq 9 (irq 2 redirected) */
hwint_slave(9)
.balign 16
hwint10:
/* Interrupt routine for irq 10 */
hwint_slave(10)
.balign 16
hwint11:
/* Interrupt routine for irq 11 */
hwint_slave(11)
.balign 16
hwint12:
/* Interrupt routine for irq 12 */
hwint_slave(12)
.balign 16
hwint13:
/* Interrupt routine for irq 13 (FPU exception) */
hwint_slave(13)
.balign 16
hwint14:
/* Interrupt routine for irq 14 (AT winchester) */
hwint_slave(14)
.balign 16
hwint15:
/* Interrupt routine for irq 15 */
hwint_slave(15)
/*
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
* syscall is only from a process to kernel
*/
2009-11-13 10:30:45 +01:00
.balign 16
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
.globl syscall_entry
syscall_entry:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
SAVE_PROCESS_CTX(0)
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
/* save the pointer to the current process */
push %ebp
/*
* pass the syscall arguments from userspace to the handler.
* SAVE_PROCESS_CTX() does not clobber these registers, they are still
* set as the userspace have set them
*/
push %edx
push %ebx
push %eax
push %ecx
/* for stack trace */
movl $0, %ebp
call sys_call
/* restore the current process pointer and save the return value */
add $4 * 4, %esp
pop %esi
mov %eax, AXREG(%esi)
jmp restart
2009-11-13 10:30:45 +01:00
.balign 16
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
/*
* called by the exception interrupt vectors. If the exception does not push
* errorcode, we assume that the vector handler pushed 0 instead. Next pushed
* thing is the vector number. From this point on we can continue as if every
* exception pushes an error code
*/
exception_entry:
/*
* check if it is a nested trap by comparing the saved code segment
* descriptor with the kernel CS first
*/
TEST_INT_IN_KERNEL(12, exception_entry_nested)
exception_entry_from_user:
cld
SAVE_PROCESS_CTX(8)
/* for stack trace clear %ebp */
movl $0, %ebp
/*
* push a pointer to the interrupt state pushed by the cpu and the
* vector number pushed by the vector handler just before calling
* exception_entry and call the exception handler.
*/
push %esp
push $0 /* it's not a nested exception */
call exception_handler
jmp restart
exception_entry_nested:
pusha
mov %esp, %eax
add $(8 * 4), %eax
push %eax
pushl $1 /* it's a nested exception */
call exception_handler
add $8, %esp
popa
/* clear the error code and the exception number */
add $8, %esp
/* resume execution at the point of exception */
iret
/*===========================================================================*/
/* restart */
/*===========================================================================*/
restart:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
call schedcheck
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
/* %eax is set by schedcheck() to the process to run */
mov %eax, %esp /* will assume P_STACKBASE == 0 */
lldt P_LDT_SEL(%esp) /* enable process' segment descriptors */
cmpl $0, P_CR3(%esp)
jz 0f
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
/*
* test if the cr3 is loaded with the current value to avoid unnecessary
* TLB flushes
*/
mov P_CR3(%esp), %eax
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
mov %cr3, %ecx
cmp %ecx, %eax
jz 0f
mov %eax, %cr3
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
mov %esp, ptproc
movl $0, dirtypde
0:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
popw %gs
popw %fs
popw %es
popw %ds
popal
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
add $4, %esp /* skip return adr FIXME unused value */
iret /* continue process */
/*===========================================================================*/
/* exception handlers */
/*===========================================================================*/
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
#define EXCEPTION_ERR_CODE(vector) \
push $vector ;\
jmp exception_entry
#define EXCEPTION_NO_ERR_CODE(vector) \
pushl $0 ;\
EXCEPTION_ERR_CODE(vector)
divide_error:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(DIVIDE_VECTOR)
single_step_exception:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(DEBUG_VECTOR)
nmi:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(NMI_VECTOR)
breakpoint_exception:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(BREAKPOINT_VECTOR)
overflow:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(OVERFLOW_VECTOR)
bounds_check:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(BOUNDS_VECTOR)
inval_opcode:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(INVAL_OP_VECTOR)
copr_not_available:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(COPROC_NOT_VECTOR)
double_fault:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_ERR_CODE(DOUBLE_FAULT_VECTOR)
copr_seg_overrun:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(COPROC_SEG_VECTOR)
inval_tss:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_ERR_CODE(INVAL_TSS_VECTOR)
segment_not_present:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_ERR_CODE(SEG_NOT_VECTOR)
stack_exception:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_ERR_CODE(STACK_FAULT_VECTOR)
general_protection:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_ERR_CODE(PROTECTION_VECTOR)
page_fault:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_ERR_CODE(PAGE_FAULT_VECTOR)
copr_error:
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
EXCEPTION_NO_ERR_CODE(COPROC_ERR_VECTOR)
/*===========================================================================*/
/* write_cr3 */
/*===========================================================================*/
/* PUBLIC void write_cr3(unsigned long value); */
write_cr3:
push %ebp
mov %esp, %ebp
mov 8(%ebp), %eax
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
mov %cr3, %ecx
cmp %ecx, %eax
jz 0f
mov %eax, %cr3
movl $0, dirtypde
0:
pop %ebp
ret
/*===========================================================================*/
/* level0_call */
/*===========================================================================*/
level0_call:
/*
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
* which level0 function to call was passed here by putting it in %eax
*/
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
SAVE_PROCESS_CTX(0)
/* for stack trace */
movl $0, %ebp
/*
* the function to call is in %eax, set in userspace. SAVE_PROCESS_CTX()
* does not clobber this register so we can use it straightaway
*/
call *%eax
jmp restart
/*===========================================================================*/
/* reload_cr3 */
/*===========================================================================*/
/* PUBLIC void reload_cr3(void); */
reload_cr3:
push %ebp
mov %esp, %ebp
movl $0, dirtypde
mov %cr3, %eax
mov %eax, %cr3
pop %ebp
ret
/*===========================================================================*/
/* data */
/*===========================================================================*/
#ifdef __ACK__
.rom /* Before the string table please */
#else
.data
#endif
.short 0x526F /* this must be the first data entry (magic #) */
.bss
Complete ovehaul of mode switching code - after a trap to kernel, the code automatically switches to kernel stack, in the future local to the CPU - k_reenter variable replaced by a test whether the CS is kernel cs or not. The information is passed further if needed. Removes a global variable which would need to be cpu local - no need for global variables describing the exception or trap context. This information is kept on stack and a pointer to this structure is passed to the C code as a single structure - removed loadedcr3 variable and its use replaced by reading the %cr3 register - no need to redisable interrupts in restart() as they are already disabled. - unified handling of traps that push and don't push errorcode - removed save() function as the process context is not saved directly to process table but saved as required by the trap code. Essentially it means that save() code is inlined everywhere not only in the exception handling routine - returning from syscall is more arch independent - it sets the retger in C - top of the x86 stack contains the current CPU id and pointer to the currently scheduled process (the one right interrupted) so the mode switch code can find where to save the context without need to use proc_ptr which will be cpu local in the future and therefore difficult to access in assembler and expensive to access in general - some more clean up of level0 code. No need to read-back the argument passed in %eax from the proc structure. The mode switch code does not clobber %the general registers and hence we can just call what is in %eax - many assebly macros in sconst.h as they will be reused by the apic assembly
2009-11-06 10:08:26 +01:00
/*
* this stack is used temporarily for booting only. We switch to a proper kernel
* stack after the first trap to kernel
*/
.globl k_boot_stktop
k_boot_stack:
.space 4096 /* kernel stack */ /* FIXME use macro here */
k_boot_stktop: /* top of kernel stack */