minix/man/man7/oss_sblive.7

246 lines
11 KiB
Groff
Raw Normal View History

2009-10-01 18:36:14 +02:00
." Automatically generated text
.TH 7 "August 31, 2006" "OSS" "OSS Devices"
.SH NAME
oss_sblive - Creative Labs Sound Blaster Live/Audigy family driver.
.SH DESCRIPTION
Open Sound System driver for Creative Labs Sound Blaster Live!, Audigy,
Audigy2, Audigy2-Value and sound cards.
The sblive driver supports:
o 8-48Khz Playback/Recording
o 8 or 16 bits
o SPDIF digital output and Input
o Multi channel 5.1 (Live!) and 7.1 (Audigy) output.
AC3 passthrough is only supported on Audigy series of the soundcards.
.SH OTHER SIMILAR CARDS
There are several Sound Blaster cards that are also called as Live or
Audigy. However these cards are based on entirely different hardware design
and they are not compatible with this driver.
.IP \(bu 3
Sound Blaster Live 5.1 card is used in some Dell machines but it's
driven by the emu10k1x driver.
.IP \(bu 3
Sound Blaster AudigyLS and Live 7.1 models are driven by the audigyls
driver of OSS.
.SH SBLIVE COMBO SPDIF AND AUDIO JACKS
Most models of Live! and Audigy cards have an orange combo jack that is
used both for the analog center/LFE output and for digital DIN (S/PDIF)
output. The output mode is selected by a driver configuration option
(seel below) which should be set to proper value depending on the actual
speaker configuration.
.IP \(bu 3
Noisy analog center/LFE output. The orange combo jack at the rear plate
of the Live/Audigy card is shared between the digital DIN and the analog
center/LFE outputs. In digital DIN mode (default) you will hear very noisy
output from the speakers connected to this output jack. If you have analog
center/LFE (subwoofer) speakers connected then you need to turn off the
sblive_digital_din (or audigy_digital_din) option.
.IP \(bu 3
There is a new configuration option to enable/disable the "digital DIN"
output. By default the digital DIN interface is enabled which disables the
center/LFE analog output (uses the same combo jack). By setting the
sblive_digital_din (or audigy_digital_din) option to 0 you can enable the
analog C/LFE output feature. When digital DIN is disabled you can still get
S/PDIF (or AC3) output from the digital (optical/coax) outputs of the
optional livedrive unit.
.SH SBLIVE MIXER
SB Live cards have actually two mixer chips. In OSS both of them are
controlled together. However only limited set of features can be controlled
using ordinary mixer programs (such as the mixer applet included in OSS).
Majority of features can only be accessed using the ossmix and ossxmix
programs included in OSS.
The AC97 mixer is used to control volumes of the back bracket inputs (mic and
line in) and the _analog_ CD input connector on the soundcard. The 'mic'
volume controls the level of the rear bracket microphone input sent directly
to the front (only front) speakers. The 'line' and 'cd' controls do the same
for the back bracket line in connector and the on board analog CD input
connector. It's usually recommended to set these volumes to 0.
Another function of the AC97 mixer is selecting the signal that is passed to
the master mixer (for example for recording). One of the 'mic', 'line' or
'cd' signals can be routed to the master mixer by selecting that device as
the recording source in the AC97 mixer. The 'rec' volume control slider can
be used to adjust the signal strength. The 'igain' control doesn't usually
have any effect but some hardware revisions may use it for controlling the
microphone recording level.
.SH SBLIVE MASTER MIXER
Other mixer functions are handled by the DSP engine of the EMU 10k1 chip.
Most input signals (including all digital signals and LiveDrive inputs).
There are only two master mixer settings that can be controlled using all
mixer programs. The 'vol' setting is the master output volume that affects
both the front and rear speakers and the headphone output (digital output
volumes are not affected). The 'pcm' setting controls volumes of all PCM
playback channels (/dev/dsp#).
In addition to volume sliders most inputs have a stereo VU meter pair
(only in ossxmix) that can be used to monitor the input and to adjust the
input levels properly.
The master mixer consists of several sections that are:
.IP \(bu 3
Primary section: This section has two settings. The "spkmode" setting
selects how front/rear speakers are used for PCM playback (outputs from
programs using /dev/dsp#). The possible settings are FRONT, REAR and
FRONT+REAR. The default is FRONT+REAR. Change this setting if you like to
get PCM playback only from front or rear speakers. The "autoreset" flag is
used to control the "/dev" section.
.IP \(bu 3
"/dev" section: This section controls the volumes of each /dev/dsp# device
file supported by the device (there are 8 of them at this moment). These
volumes will return back to maximum every time the device is opened. However
this can be disabled by setting the 'autoreset' option to OFF. The ossxmix
program has special ability to show the application using the particular
/dev/dsp device (for layout reasons only the first 4 characters of the
program name are shown).
.IP \(bu 3
The equalizer section: This section controls the graphic equalizer for
front speakers only.
.IP \(bu 3
The front rear, and record sections: These three identical sections control
the levels of external inputs and PCM playback (/dev/dsp# devices) to be
sent to the front/rear speakers and to the recording device.
The CD Analog audio will only be heard from the FRONT speakers.
.SH SBLIVE RECORDING
Before recording anything you need to set the volumes in the recording
section properly. To enable recording from the AC97 connected inputs
(mic, line in and analog CD) use the AC97 mixer to select the desired input
and then tune the input level using the rec (and igain) setting.
Finally set the 'ac97' slider in the record section of the master mixer so
that the recording level is suitable.
The OSS drivers permit recording any application that's currently playing.
To record audio that's playing on any of the SB Live channels:
.IP \(bu 3
Turn down the AC97 control in the "record" section. This prevents any audio
being fed to the soundcard from MIC/Line-in/CD-in from getting mixed with
the audio produced by the application that's currently playing.
.IP \(bu 3
Type ossrecord -s<sampling rate> -b<bits/sample> -c<channels> test.wav
.IP \(bu 3
To stop recording press <Ctrl-c> and then you can play back the test.wav
file using ossplay command.
RECORDING ISSUES:
In most cases noise is caused by the microphone input or some other
(unused) input. Use the ossxmix program to turn off all unused inputs and
finally save the current mixer settings (see below).
Hint: Look at the VU meter panels of ossxmix. It's usually very easy to
locate the noise source by looking which input has some signal coming from
it.
WARNING! If you turn off some of the signals in recording section or the
AC97 mixer section this affects all subsequent recordings. Remember
to raise the volume prior doing any recording. After that decrease
the volumes again if necessary.
.SH SBLIVE HARDWARE MIXING
You can use /dev/oss/oss_sblive0/ pcm0-pcm7 to play multiple audio programs
using the hardware mixing.
Simply specify the device name with the application. A simple test is
to do the following:
ossplay -d/dev/oss/oss_sblive0/pcm0 <file1.wav> &
ossplay -d/dev/oss/oss_sblive0/pcm1 <file2.wav> &
ossplay -d/dev/oss/oss_sblive0/pcm2 <file3.wav> &
You should hear all three wav files playing simultaneously.
NOTE: Some apps may desire the old /dev/dspN names. e.g. /dev/dsp0 - /dev/dsp7.
NOTE: You can increase the number of output devices from the standard 8 devices
to 32 device. For this, run soundconf, select Set configuration options and
look for the entry "sblive_device", now type any number between 1 and 32
for the number of channels you wish. You can also do this manually by editing
oss_sblive.conf and inserting sblive_devices=XX entry,
e.g.: sblive_devices=27
.SH CDROM CONNNECTIONS
There are two alternative ways to connect audio signal from a CD-ROM drive tor
the SB Live soundcard. You can use a (three wire) analog cable or a (2 wire)
digital cable. OSS now supports both of these choices. Note that there are
separate mixer settings for both of these connections.
The analog CD-ROM wire is connected to the AC97 code chip and this method
works in most cases. To route the analog CD -input to the (front) speakers
you need to raise the volume of the 'cd' control in mixer. However if you
like to hear the analog CD input both from the front and rears speakers you
need to do this in slightly different way (please read the description of
the mixer above).
The digital connection works only with CD-ROM drives that has support for it.
Note that some CD-ROM drives having this digital output connector use a
different signal level than the one required by SB Live. This means that the
digital connection doesn't work with all CD-ROM drives (no sound). If you
have problems with the digital connection you should use the analog one.
When using the the digital CD input you may need to adjust the 'digcd'
volumes using ossxmix (or ossmix).
It should be noted that SB Live works internally at 48 kHz. This means that
all S/PDIF input signals are automatically sample rate converted to 48 kHz.
If you record from a 44.1 kHz (CD-ROM) and save the result to a 44.1 kHz
file the signal will be sample rate converted twice. First from the 44.1 kHz
input to internal 48 kHz and then back to 44.1 kHz. While the sample rate
converter of SB Live is very precise this will cause some change. This should
not be any problem when doing audio recordings but it may cause unwanted
results when transferring digital data (such as AC3/DTS) using the S/PDIF
the interface.
.SH CONFIGURATION OPTIONS
.IP \(bu 3
sblive_digital_din=<0|1> - This option is to enable/disable the "digital DIN"
output of SB Live. By default the digital DIN interface is disabled which
enables the center/LFE analog output (uses the same combo jack). By
setting the sblive_digital_din option to 0 you can enable the analog
Center/LFE output feature. When digital DIN is disabled you can still
get S/PDIF (or AC3) output from the digital (optical/coax) outputs of the
optional livedrive unit. Default: 0=analog output.
.IP \(bu 3
audigy_digital_din=<0|1> - same as "sblive_digital_din" option except for
the Audigy soundcards. Default: 1=digital output.
.IP \(bu 3
sblive_devices=<1..32> - Number of audio devices to be configured.
.SH LIMITATION
.IP \(bu 3
SB Live! devices will not work in Sparc systems due to PCI addressing
limitations. Only Audigy/Audigy2 models work under Sparc.
.IP \(bu 3
EMU Wavetable MIDI synthesizer is not supported
.IP \(bu 3
AC3 passthrough only supported on Audigy/Audigy but not on SB Live! devices.
.SH FILES
/usr/lib/oss/conf/oss_sblive.conf Device configuration file
.SH AUTHOR
4Front Technologies