minix/tests/lib/libcurses/testframe.txt

241 lines
10 KiB
Text
Raw Normal View History

CURSES TESTFRAME
----------------
1. Introduction
The curses library is a complex piece of software and, often, changes
made to the library may introduce subtle bugs that are hidden by other
actions so a visual check of the curses output may look correct in
some circumstances and the bug only show itself after a certain
sequence of actions. To assist with validating that changes made to
the curses library have no undesired effects an automated test is
needed to detect and highlight any changes in the curses application
output stream. The programmer can then analyse the output changes and
either correct a bug or update the automated test to accept the new
output as valid.
2. Architecture
The curses testframe consists of two separate programs connected by a
number of pipes and a pseudo-tty (pty). The programs are called the
director and the slave. The director reads a configuration file of
tests to perform, passes these commands to the slave over a pipe and
reads the pty for any output from the slave. Data from the slave is
compared against expected output held in a file and any differences
are highlighted to the tester. The slave is a curses application that
is forked by the director on start up. It reads commands from the
director over a pipe, these commands are calls to curses routines
along with the parameters required for the call. The slave takes the
parameters and uses them as arguments for the requested curses routine
call. The return value from the curses routine is passed back to the
director over another pipe, if the curses routine updates any passed
by reference arguments then these are also passed back to the director
for analysis.
3. Director
The director has the following optional command line options:
-v enables verbose output to assist debugging
-s slave_path the director will execute slave_path as the slave
process. The default is ./slave
-t term Sets the TERM environment variable to term when
executing the slave. The default is atf
There is one mandatory command line parameter, that is a file name
that contains the test command file. The test command file holds the
calls required to exercise a particular curses routine and validate
both the return codes from the routines and the output from the
slave. The test language has a small number of commands, they are:
assign:
Assign a value to a variable. The syntax is:
assign var_name value
Where var_name is the name of the variable. Variable names are
an arbitrary sequence of alphanumeric characters, the variable
name must start with an alphabetic character. Value is the value
to be assigned. The value can either be a numeric or a string
type. Variables are created on first use and will be
overwritten on each subsequent use.
call, call2, call3, call4:
All these are used to call curses routines, the only difference
between then is the number of expected return values. Call
expects one return value, call2 expects 2, call3 expects 3 and
call4 expects four. Any parameters that are passed by reference
and updated by the call are treated like returns. So, for
example, calling the function getyx() which has three
parameters, the window, a pointer to storage for y and a pointer
to storage for x would be called like this:
call3 OK 4 5 getyx $win1
Which calls getyx, the first (and possibly only) return is the
return status of the function call, in this case we expect "OK"
indicating that the call succeeded. The next two returns are
the values of y and x respectively, the parameter $win1 is a
variable that was assigned by a previous call. Any return can
be assigned to a variable by including the variable name in a
call return list. Variables are referenced in a call parameter
list by prefixing the name with a $ character. All returns are
validated against the expected values and an error raised if
there is a mismatch. The only exception to this is when the
return is assigned to a variable. Valid values for the returns
list are:
variable - assign the return to the given variable
name.
numeric - the value of the return must match the
number given.
string - an arbitrary sequence of characters
enclosed in double quotes.
ERR - expect an ERR return
OK - expect an OK return
NULL - expect a NULL pointer return
NON_NULL - expect a pointer that is not NULL valued
There is one special parameter that can be passed to a call,
that is the label STDSCR. This parameter will be substituted by
the value of stdscr when the function call is made.
check:
Validate the value of a variable. This allows a variable to be
checked for an expected return after it has been assigned in a
previous call. The syntax is:
check var_name expected_result
Where var_name is a variable previously assigned and
expected_result is one of the valid return values listed in the
above call section.
compare:
Compares the output stream from the slave against the contents
of a file that contains the expected
output. The syntax is:
compare filename
Where filename is the name of the file containing the expected
output. The file can either be an absolute path or relative
path. In the latter case the value of the environment variable
CHECK_PATH will be prepended to the argument to provide the path
to the file. The contents of this file will be compared byte by
byte against the output from the slave, any differences in the
output will be flagged. If the director is not in verbose mode
then the first mismatch in the byte stream will cause the
director to exit.
comparend:
Performs the same function as the above compare except that
excess output from the slave is not discarded if there is more
data from the slave than there is in the check file. This
allows chaining of multiple check files.
delay:
Defines an inter-character delay to be inserted between
characters being fed into the input of the slave. The syntax
is:
delay time
Where time is the amount of time to delay in milliseconds.
include:
Include the contents of another test file, the parser will
suspend reading the current file and read commands from the
include file until the end of file of the include file is
reached at which point it will continue reading the original
file. Include files may be nested. The syntax is:
include filename
Where filename is the name of the file to include. If the
filename is not an absolute path then the contents of the
environment variable INCLUDE_PATH are prepended to the file
name.
input:
Defines a string of characters that will be fed to the slave
when a call requires input. Any unused input will be discarded
after the call that required the input is called. The syntax
is:
input "string to pass"
noinput:
Normally the director will error if an input function is called
without input being previously defined, this is to prevent input
functions causing the test to hang waiting for input that never
comes. If it is known that there is pending input for the slave
then the noinput keyword can be used to flag that the input
function has data available for it to read. The noinput command
only applies to the next function call then behaviour reverts to
the default.
The testframe can define different types of strings, the type of string
depends on the type of enclosing quotes. A null terminated string is
indicated by enclosing double (") quotes. A byte string, one that is
not null terminated and may contain the nul character within it is
indicated by enclosing single (') quotes. A string of chtype
character which are a combined attribute and character value is
indicated by enclosing backticks (`), for this type of string pairs of
bytes between the backticks are converted to an array of chtype, the
first byte is the attribute and the second is the character.
All strings defined will have a simple set of character substitutions
performed on them when they are parsed. This allows the tester to
embed some control characters into the string. Valid substitutions
are:
\e escape
\n new line
\t tab
\\ \ character
\nnn Where nnn is three octal digits, the character
represented by the octal number will be inserted into
the string.
Any other invalid conversions will have the \ stripped and the
subsequent characters inserted into the string.
Integers may be specified by either a plain numeric (e.g. 12345) or by
hexadecimal notation by prefixing the number with 0x (e.g. 0x3039).
Internally, no distinction is made between the two formats and they
can be freely intermixed.
Integers and variables containing integers can have operations
performed on them. Currently only bitwise ORing numbers together is
supported. This can be done by separating a list of integers and
variables with the pipe (|) symbol and enclosing the entire list in
round brackets "()" like this:
( $var1 | 0x0100 | $var2 | 512 )
Variables and integer constants may be freely intermixed. The result
of the operation can either be used as an argument for a call or can
be used as an expected result for a call.
In addition to all the curses calls being supported by the slave,
there is one more special call called "drain". This call repeatedly
called getch() until there are no more characters in stdin. The call
assumes that the curses input is either in no delay or timed input
mode otherwise the test will time out and fail. This call can be used
to clear any pending input when testing testing a timed read to
prevent the input being used in a later test.
4. Slave
The user has no direct interaction with the slave process. The slave
is forked off by the director communicates to the director over a set
of pipes and a pseudo-tty connected to its standard i/o file
descriptors. The slave executes the passed curses calls and passes
back return values to the director. The slave automatically calls
initscr() on start up.