minix/servers/vfs/dmap.c

409 lines
12 KiB
C
Raw Normal View History

2005-04-21 16:53:53 +02:00
/* This file contains the table with device <-> driver mappings. It also
* contains some routines to dynamically add and/ or remove device drivers
* or change mappings.
*/
#include "fs.h"
#include "fproc.h"
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include <unistd.h>
2005-04-21 16:53:53 +02:00
#include <minix/com.h>
2007-08-07 14:52:47 +02:00
#include <minix/ds.h>
#include "param.h"
2005-04-21 16:53:53 +02:00
/* Some devices may or may not be there in the next table. */
2007-08-07 14:52:47 +02:00
#define DT(enable, opcl, io, driver, flags, label) \
2005-04-21 16:53:53 +02:00
{ (enable?(opcl):no_dev), (enable?(io):0), \
(enable?(driver):0), (flags), label, FALSE },
2005-08-03 13:53:36 +02:00
#define NC(x) (NR_CTRLRS >= (x))
2005-04-21 16:53:53 +02:00
/* The order of the entries here determines the mapping between major device
* numbers and tasks. The first entry (major device 0) is not used. The
* next entry is major device 1, etc. Character and block devices can be
* intermixed at random. The ordering determines the device numbers in /dev/.
* Note that FS knows the device number of /dev/ram/ to load the RAM disk.
* Also note that the major device numbers used in /dev/ are NOT the same as
* the process numbers of the device drivers.
*/
/*
Driver enabled Open/Cls I/O Driver # Flags Device File
-------------- -------- ------ ----------- ----- ------ ----
*/
struct dmap dmap[NR_DEVICES]; /* actual map */
PRIVATE struct dmap init_dmap[] = {
2007-08-07 14:52:47 +02:00
DT(1, no_dev, 0, 0, 0, "") /* 0 = not used */
DT(1, gen_opcl, gen_io, MEM_PROC_NR, 0, "memory") /* 1 = /dev/mem */
DT(0, no_dev, 0, 0, DMAP_MUTABLE, "") /* 2 = /dev/fd0 */
DT(0, no_dev, 0, 0, DMAP_MUTABLE, "") /* 3 = /dev/c0 */
DT(1, tty_opcl, gen_io, TTY_PROC_NR, 0, "") /* 4 = /dev/tty00 */
DT(1, ctty_opcl,ctty_io, TTY_PROC_NR, 0, "") /* 5 = /dev/tty */
DT(0, no_dev, 0, NONE, DMAP_MUTABLE, "") /* 6 = /dev/lp */
2005-04-21 16:53:53 +02:00
#if (MACHINE == IBM_PC)
2007-08-07 14:52:47 +02:00
DT(1, no_dev, 0, 0, DMAP_MUTABLE, "") /* 7 = /dev/ip */
DT(0, no_dev, 0, NONE, DMAP_MUTABLE, "") /* 8 = /dev/c1 */
DT(0, 0, 0, 0, DMAP_MUTABLE, "") /* 9 = not used */
DT(0, no_dev, 0, 0, DMAP_MUTABLE, "") /*10 = /dev/c2 */
2009-12-02 11:08:58 +01:00
DT(0, no_dev, 0, 0, DMAP_MUTABLE, "") /*11 = /dev/filter*/
2007-08-07 14:52:47 +02:00
DT(0, no_dev, 0, NONE, DMAP_MUTABLE, "") /*12 = /dev/c3 */
DT(0, no_dev, 0, NONE, DMAP_MUTABLE, "") /*13 = /dev/audio */
DT(0, 0, 0, 0, DMAP_MUTABLE, "") /*14 = not used */
DT(1, gen_opcl, gen_io, LOG_PROC_NR, 0, "") /*15 = /dev/klog */
2007-08-07 14:52:47 +02:00
DT(0, no_dev, 0, NONE, DMAP_MUTABLE, "") /*16 = /dev/random*/
DT(0, 0, 0, 0, DMAP_MUTABLE, "") /*17 = not used */
2005-04-21 16:53:53 +02:00
#endif /* IBM_PC */
};
2007-08-07 14:52:47 +02:00
FORWARD _PROTOTYPE( int map_driverX, (char *label, int major,
endpoint_t proc_nr_e, int style, int force) );
/*===========================================================================*
* do_devctl *
*===========================================================================*/
PUBLIC int do_devctl()
{
if (!super_user)
{
printf("FS: unauthorized call of do_devctl by proc %d\n",
who_e);
return(EPERM); /* only su (should be only RS or some drivers)
* may call do_devctl.
*/
}
2006-05-11 16:57:23 +02:00
return fs_devctl(m_in.ctl_req, m_in.dev_nr, m_in.driver_nr,
m_in.dev_style, m_in.m_force);
}
/*===========================================================================*
* fs_devctl *
*===========================================================================*/
PUBLIC int fs_devctl(req, dev, proc_nr_e, style, force)
int req;
int dev;
int proc_nr_e;
int style;
int force;
{
int result, proc_nr_n;
2006-05-11 16:57:23 +02:00
switch(req) {
case DEV_MAP:
2006-05-11 16:57:23 +02:00
if (!force)
{
/* Check process number of new driver. */
if (isokendpt(proc_nr_e, &proc_nr_n) != OK)
return(EINVAL);
}
/* Try to update device mapping. */
2006-05-11 16:57:23 +02:00
result = map_driver(dev, proc_nr_e, style, force);
if (result == OK)
{
/* If a driver has completed its exec(), it can be announced to be
* up.
*/
2006-05-11 16:57:23 +02:00
if(force || fproc[proc_nr_n].fp_execced) {
dev_up(dev);
} else {
2006-05-11 16:57:23 +02:00
dmap[dev].dmap_flags |= DMAP_BABY;
}
}
break;
case DEV_UNMAP:
2006-05-11 16:57:23 +02:00
result = map_driver(dev, NONE, 0, 0);
break;
default:
result = EINVAL;
}
return(result);
}
2007-08-07 14:52:47 +02:00
/*===========================================================================*
* do_mapdriver *
*===========================================================================*/
PUBLIC int do_mapdriver()
{
int r, force, major, proc_nr_n;
unsigned long tasknr;
vir_bytes label_vir;
size_t label_len;
char label[16];
if (!super_user)
{
printf("FS: unauthorized call of do_mapdriver by proc %d\n",
who_e);
return(EPERM); /* only su (should be only RS or some drivers)
* may call do_mapdriver.
*/
}
/* Get the label */
label_vir= (vir_bytes)m_in.md_label;
label_len= m_in.md_label_len;
if (label_len+1 > sizeof(label))
{
printf("vfs:do_mapdriver: label too long\n");
return EINVAL;
}
r= sys_vircopy(who_e, D, label_vir, SELF, D, (vir_bytes)label,
label_len);
if (r != OK)
{
printf("vfs:do_mapdriver: sys_vircopy failed: %d\n", r);
return EINVAL;
}
label[label_len]= '\0';
r= ds_retrieve_u32(label, &tasknr);
if (r != OK)
{
printf("vfs:do_mapdriver: ds doesn't know '%s'\n", label);
return EINVAL;
}
if (isokendpt(tasknr, &proc_nr_n) != OK)
{
printf("vfs:do_mapdriver: bad endpoint %d\n", tasknr);
2007-08-07 14:52:47 +02:00
return(EINVAL);
}
2007-08-07 14:52:47 +02:00
/* Try to update device mapping. */
major= m_in.md_major;
force= m_in.md_force;
r= map_driverX(label, major, tasknr, m_in.md_style, force);
if (r == OK)
{
/* If a driver has completed its exec(), it can be announced
* to be up.
*/
if(force || fproc[proc_nr_n].fp_execced) {
dev_up(major);
} else {
dmap[major].dmap_flags |= DMAP_BABY;
}
}
return(r);
}
2005-04-21 16:53:53 +02:00
/*===========================================================================*
* map_driver *
*===========================================================================*/
2006-05-11 16:57:23 +02:00
PUBLIC int map_driver(major, proc_nr_e, style, force)
2005-04-21 16:53:53 +02:00
int major; /* major number of the device */
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
int proc_nr_e; /* process number of the driver */
int style; /* style of the device */
2006-05-11 16:57:23 +02:00
int force;
2005-04-21 16:53:53 +02:00
{
/* Set a new device driver mapping in the dmap table. Given that correct
* arguments are given, this only works if the entry is mutable and the
2005-10-03 16:17:33 +02:00
* current driver is not busy. If the proc_nr is set to NONE, we're supposed
* to unmap it.
*
2005-04-21 16:53:53 +02:00
* Normal error codes are returned so that this function can be used from
* a system call that tries to dynamically install a new driver.
*/
struct dmap *dp;
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
int proc_nr_n;
2005-04-21 16:53:53 +02:00
/* Get pointer to device entry in the dmap table. */
2005-10-03 16:17:33 +02:00
if (major < 0 || major >= NR_DEVICES) return(ENODEV);
2005-04-21 16:53:53 +02:00
dp = &dmap[major];
/* Check if we're supposed to unmap it. If so, do it even
* if busy or unmutable, as unmap is called when driver has
* exited.
*/
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
if(proc_nr_e == NONE) {
2005-10-03 16:17:33 +02:00
dp->dmap_opcl = no_dev;
dp->dmap_io = no_dev_io;
dp->dmap_driver = NONE;
dp->dmap_flags = DMAP_MUTABLE; /* When gone, not busy or reserved. */
2005-10-03 16:17:33 +02:00
return(OK);
}
/* See if updating the entry is allowed. */
if (! (dp->dmap_flags & DMAP_MUTABLE)) return(EPERM);
if (dp->dmap_flags & DMAP_BUSY) return(EBUSY);
2005-10-03 16:17:33 +02:00
2006-05-11 16:57:23 +02:00
if (!force)
{
/* Check process number of new driver. */
if (isokendpt(proc_nr_e, &proc_nr_n) != OK)
return(EINVAL);
}
2005-04-21 16:53:53 +02:00
/* Try to update the entry. */
switch (style) {
2005-04-21 16:53:53 +02:00
case STYLE_DEV: dp->dmap_opcl = gen_opcl; break;
case STYLE_TTY: dp->dmap_opcl = tty_opcl; break;
case STYLE_CLONE: dp->dmap_opcl = clone_opcl; break;
default: return(EINVAL);
}
dp->dmap_io = gen_io;
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
dp->dmap_driver = proc_nr_e;
2005-04-21 16:53:53 +02:00
return(OK);
}
2007-08-07 14:52:47 +02:00
/*===========================================================================*
* map_driverX *
*===========================================================================*/
PRIVATE int map_driverX(label, major, proc_nr_e, style, force)
char *label; /* name of the driver */
int major; /* major number of the device */
endpoint_t proc_nr_e; /* process number of the driver */
int style; /* style of the device */
int force;
{
/* Set a new device driver mapping in the dmap table. Given that correct
* arguments are given, this only works if the entry is mutable and the
* current driver is not busy. If the proc_nr is set to NONE, we're supposed
* to unmap it.
*
* Normal error codes are returned so that this function can be used from
* a system call that tries to dynamically install a new driver.
*/
int proc_nr_n;
size_t len;
struct dmap *dp;
/* Get pointer to device entry in the dmap table. */
if (major < 0 || major >= NR_DEVICES) return(ENODEV);
dp = &dmap[major];
/* Check if we're supposed to unmap it. If so, do it even
* if busy or unmutable, as unmap is called when driver has
* exited.
*/
if(proc_nr_e == NONE) {
dp->dmap_opcl = no_dev;
dp->dmap_io = no_dev_io;
dp->dmap_driver = NONE;
dp->dmap_flags = DMAP_MUTABLE; /* When gone, not busy or reserved. */
return(OK);
}
/* See if updating the entry is allowed. */
if (! (dp->dmap_flags & DMAP_MUTABLE)) return(EPERM);
if (dp->dmap_flags & DMAP_BUSY) return(EBUSY);
if (!force)
{
/* Check process number of new driver. */
if (isokendpt(proc_nr_e, &proc_nr_n) != OK)
return(EINVAL);
}
len= strlen(label);
if (len+1 > sizeof(dp->dmap_label))
panic(__FILE__, "map_driver: label too long", len);
strcpy(dp->dmap_label, label);
/* Try to update the entry. */
switch (style) {
case STYLE_DEV: dp->dmap_opcl = gen_opcl; break;
case STYLE_TTY: dp->dmap_opcl = tty_opcl; break;
case STYLE_CLONE: dp->dmap_opcl = clone_opcl; break;
default: return(EINVAL);
}
dp->dmap_io = gen_io;
dp->dmap_driver = proc_nr_e;
if (dp->dmap_async_driver)
dp->dmap_io= asyn_io;
2007-08-07 14:52:47 +02:00
return(OK);
}
/*===========================================================================*
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
* dmap_unmap_by_endpt *
*===========================================================================*/
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
PUBLIC void dmap_unmap_by_endpt(int proc_nr_e)
{
int i, r;
for (i=0; i<NR_DEVICES; i++)
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
if(dmap[i].dmap_driver && dmap[i].dmap_driver == proc_nr_e)
2006-05-11 16:57:23 +02:00
if((r=map_driver(i, NONE, 0, 0)) != OK)
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
printf("FS: unmap of p %d / d %d failed: %d\n", proc_nr_e,i,r);
return;
}
2005-04-21 16:53:53 +02:00
/*===========================================================================*
* build_dmap *
2005-04-21 16:53:53 +02:00
*===========================================================================*/
PUBLIC void build_dmap()
2005-04-21 16:53:53 +02:00
{
/* Initialize the table with all device <-> driver mappings. Then, map
* the boot driver to a controller and update the dmap table to that
* selection. The boot driver and the controller it handles are set at
* the boot monitor.
2005-04-21 16:53:53 +02:00
*/
int i;
struct dmap *dp;
/* Build table with device <-> driver mappings. */
for (i=0; i<NR_DEVICES; i++) {
dp = &dmap[i];
if (i < sizeof(init_dmap)/sizeof(struct dmap) &&
init_dmap[i].dmap_opcl != no_dev) { /* a preset driver */
dp->dmap_opcl = init_dmap[i].dmap_opcl;
dp->dmap_io = init_dmap[i].dmap_io;
dp->dmap_driver = init_dmap[i].dmap_driver;
dp->dmap_flags = init_dmap[i].dmap_flags;
2007-08-07 14:52:47 +02:00
strcpy(dp->dmap_label, init_dmap[i].dmap_label);
dp->dmap_async_driver= FALSE;
} else { /* no default */
dp->dmap_opcl = no_dev;
dp->dmap_io = no_dev_io;
dp->dmap_driver = NONE;
dp->dmap_flags = DMAP_MUTABLE;
}
}
dmap[13].dmap_async_driver= TRUE; /* Audio */
dmap[15].dmap_async_driver= TRUE; /* Log */
dmap[15].dmap_io= asyn_io;
dmap[16].dmap_async_driver= TRUE; /* Random */
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
* dmap_driver_match *
*===========================================================================*/
PUBLIC int dmap_driver_match(endpoint_t proc, int major)
{
if (major < 0 || major >= NR_DEVICES) return(0);
if(dmap[major].dmap_driver != NONE && dmap[major].dmap_driver == proc)
return 1;
return 0;
}
/*===========================================================================*
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
* dmap_endpt_up *
*===========================================================================*/
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
PUBLIC void dmap_endpt_up(int proc_e)
{
int i;
for (i=0; i<NR_DEVICES; i++) {
if(dmap[i].dmap_driver != NONE
endpoint-aware conversion of servers. 'who', indicating caller number in pm and fs and some other servers, has been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.). In both PM and FS, isokendpt() convert endpoints to process slot numbers, returning OK if it was a valid and consistent endpoint number. okendpt() does the same but panic()s if it doesn't succeed. (In PM, this is pm_isok..) pm and fs keep their own records of process endpoints in their proc tables, which are needed to make kernel calls about those processes. message field names have changed. fs drivers are endpoints. fs now doesn't try to get out of driver deadlock, as the protocol isn't supposed to let that happen any more. (A warning is printed if ELOCKED is detected though.) fproc[].fp_task (indicating which driver the process is suspended on) became an int. PM and FS now get endpoint numbers of initial boot processes from the kernel. These happen to be the same as the old proc numbers, to let user processes reach them with the old numbers, but FS and PM don't know that. All new processes after INIT, even after the generation number wraps around, get endpoint numbers with generation 1 and higher, so the first instances of the boot processes are the only processes ever to have endpoint numbers in the old proc number range. More return code checks of sys_* functions have been added. IS has become endpoint-aware. Ditched the 'text' and 'data' fields in the kernel dump (which show locations, not sizes, so aren't terribly useful) in favour of the endpoint number. Proc number is still visible. Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got the formatting changed. PM reading segments using rw_seg() has changed - it uses other fields in the message now instead of encoding the segment and process number and fd in the fd field. For that it uses _read_pm() and _write_pm() which to _taskcall()s directly in pm/misc.c. PM now sys_exit()s itself on panic(), instead of sys_abort(). RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
&& dmap[i].dmap_driver == proc_e
&& (dmap[i].dmap_flags & DMAP_BABY)) {
dmap[i].dmap_flags &= ~DMAP_BABY;
dev_up(i);
}
}
return;
}