331 lines
7.3 KiB
C
331 lines
7.3 KiB
C
|
/*
|
||
|
|
ne2000.c
|
||
|
|
|
||
|
|
Driver for the ne2000 ethernet cards. This file contains only the ne2000
|
||
|
|
specific code, the rest is in dp8390.c
|
||
|
|
|
||
|
|
Created: March 15, 1994 by Philip Homburg <philip@f-mnx.phicoh.com>
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "../drivers.h"
|
||
|
|
|
||
|
|
#include <net/gen/ether.h>
|
||
|
|
#include <net/gen/eth_io.h>
|
||
|
|
#if __minix_vmd
|
||
|
|
#include "config.h"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#include "local.h"
|
||
|
|
#include "dp8390.h"
|
||
|
|
#include "ne2000.h"
|
||
|
|
|
||
|
|
#if ENABLE_NE2000
|
||
|
|
|
||
|
|
#define N 100
|
||
|
|
|
||
|
|
#define MILLIS_TO_TICKS(m) (((m)*HZ/1000)+1)
|
||
|
|
|
||
|
|
_PROTOTYPE( typedef int (*testf_t), (dpeth_t *dep, int pos, u8_t *pat) );
|
||
|
|
|
||
|
|
u8_t pat0[]= { 0x00, 0x00, 0x00, 0x00 };
|
||
|
|
u8_t pat1[]= { 0xFF, 0xFF, 0xFF, 0xFF };
|
||
|
|
u8_t pat2[]= { 0xA5, 0x5A, 0x69, 0x96 };
|
||
|
|
u8_t pat3[]= { 0x96, 0x69, 0x5A, 0xA5 };
|
||
|
|
|
||
|
|
_PROTOTYPE( static int test_8, (dpeth_t *dep, int pos, u8_t *pat) );
|
||
|
|
_PROTOTYPE( static int test_16, (dpeth_t *dep, int pos, u8_t *pat) );
|
||
|
|
_PROTOTYPE( static void ne_stop, (dpeth_t *dep) );
|
||
|
|
_PROTOTYPE( static void milli_delay, (unsigned long millis) );
|
||
|
|
|
||
|
|
/*===========================================================================*
|
||
|
|
* ne_probe *
|
||
|
|
*===========================================================================*/
|
||
|
|
int ne_probe(dep)
|
||
|
|
dpeth_t *dep;
|
||
|
|
{
|
||
|
|
int byte;
|
||
|
|
int i;
|
||
|
|
int loc1, loc2;
|
||
|
|
testf_t f;
|
||
|
|
|
||
|
|
dep->de_dp8390_port= dep->de_base_port + NE_DP8390;
|
||
|
|
|
||
|
|
/* We probe for an ne1000 or an ne2000 by testing whether the
|
||
|
|
* on board is reachable through the dp8390. Note that the
|
||
|
|
* ne1000 is an 8bit card and has a memory region distict from
|
||
|
|
* the 16bit ne2000
|
||
|
|
*/
|
||
|
|
|
||
|
|
for (dep->de_16bit= 0; dep->de_16bit < 2; dep->de_16bit++)
|
||
|
|
{
|
||
|
|
/* Reset the ethernet card */
|
||
|
|
byte= inb_ne(dep, NE_RESET);
|
||
|
|
milli_delay(2);
|
||
|
|
outb_ne(dep, NE_RESET, byte);
|
||
|
|
milli_delay(2);
|
||
|
|
|
||
|
|
/* Reset the dp8390 */
|
||
|
|
outb_reg0(dep, DP_CR, CR_STP | CR_DM_ABORT);
|
||
|
|
for (i= 0; i < 0x1000 && ((inb_reg0(dep, DP_ISR) & ISR_RST) == 0); i++)
|
||
|
|
; /* Do nothing */
|
||
|
|
|
||
|
|
/* Check if the dp8390 is really there */
|
||
|
|
if ((inb_reg0(dep, DP_CR) & (CR_STP|CR_DM_ABORT)) !=
|
||
|
|
(CR_STP|CR_DM_ABORT))
|
||
|
|
{
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Disable the receiver and init TCR and DCR. */
|
||
|
|
outb_reg0(dep, DP_RCR, RCR_MON);
|
||
|
|
outb_reg0(dep, DP_TCR, TCR_NORMAL);
|
||
|
|
if (dep->de_16bit)
|
||
|
|
{
|
||
|
|
outb_reg0(dep, DP_DCR, DCR_WORDWIDE | DCR_8BYTES |
|
||
|
|
DCR_BMS);
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
outb_reg0(dep, DP_DCR, DCR_BYTEWIDE | DCR_8BYTES |
|
||
|
|
DCR_BMS);
|
||
|
|
}
|
||
|
|
|
||
|
|
if (dep->de_16bit)
|
||
|
|
{
|
||
|
|
loc1= NE2000_START;
|
||
|
|
loc2= NE2000_START + NE2000_SIZE - 4;
|
||
|
|
f= test_16;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
loc1= NE1000_START;
|
||
|
|
loc2= NE1000_START + NE1000_SIZE - 4;
|
||
|
|
f= test_8;
|
||
|
|
}
|
||
|
|
if (f(dep, loc1, pat0) && f(dep, loc1, pat1) &&
|
||
|
|
f(dep, loc1, pat2) && f(dep, loc1, pat3) &&
|
||
|
|
f(dep, loc2, pat0) && f(dep, loc2, pat1) &&
|
||
|
|
f(dep, loc2, pat2) && f(dep, loc2, pat3))
|
||
|
|
{
|
||
|
|
/* We don't need a memory segment */
|
||
|
|
dep->de_linmem= 0;
|
||
|
|
if (!dep->de_pci)
|
||
|
|
dep->de_initf= ne_init;
|
||
|
|
dep->de_stopf= ne_stop;
|
||
|
|
dep->de_prog_IO= 1;
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*===========================================================================*
|
||
|
|
* ne_init *
|
||
|
|
*===========================================================================*/
|
||
|
|
void ne_init(dep)
|
||
|
|
dpeth_t *dep;
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
int word, sendq_nr;
|
||
|
|
|
||
|
|
/* Setup a transfer to get the ethernet address. */
|
||
|
|
if (dep->de_16bit)
|
||
|
|
outb_reg0(dep, DP_RBCR0, 6*2);
|
||
|
|
else
|
||
|
|
outb_reg0(dep, DP_RBCR0, 6);
|
||
|
|
outb_reg0(dep, DP_RBCR1, 0);
|
||
|
|
outb_reg0(dep, DP_RSAR0, 0);
|
||
|
|
outb_reg0(dep, DP_RSAR1, 0);
|
||
|
|
outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);
|
||
|
|
|
||
|
|
for (i= 0; i<6; i++)
|
||
|
|
{
|
||
|
|
if (dep->de_16bit)
|
||
|
|
{
|
||
|
|
word= inw_ne(dep, NE_DATA);
|
||
|
|
dep->de_address.ea_addr[i]= word;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
dep->de_address.ea_addr[i] = inb_ne(dep, NE_DATA);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
dep->de_data_port= dep->de_base_port + NE_DATA;
|
||
|
|
if (dep->de_16bit)
|
||
|
|
{
|
||
|
|
dep->de_ramsize= NE2000_SIZE;
|
||
|
|
dep->de_offset_page= NE2000_START / DP_PAGESIZE;
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
dep->de_ramsize= NE1000_SIZE;
|
||
|
|
dep->de_offset_page= NE1000_START / DP_PAGESIZE;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Allocate one send buffer (1.5KB) per 8KB of on board memory. */
|
||
|
|
sendq_nr= dep->de_ramsize / 0x2000;
|
||
|
|
if (sendq_nr < 1)
|
||
|
|
sendq_nr= 1;
|
||
|
|
else if (sendq_nr > SENDQ_NR)
|
||
|
|
sendq_nr= SENDQ_NR;
|
||
|
|
dep->de_sendq_nr= sendq_nr;
|
||
|
|
for (i= 0; i<sendq_nr; i++)
|
||
|
|
{
|
||
|
|
dep->de_sendq[i].sq_sendpage= dep->de_offset_page +
|
||
|
|
i*SENDQ_PAGES;
|
||
|
|
}
|
||
|
|
|
||
|
|
dep->de_startpage= dep->de_offset_page + i*SENDQ_PAGES;
|
||
|
|
dep->de_stoppage= dep->de_offset_page + dep->de_ramsize / DP_PAGESIZE;
|
||
|
|
|
||
|
|
/* Can't override the default IRQ. */
|
||
|
|
dep->de_irq &= ~DEI_DEFAULT;
|
||
|
|
|
||
|
|
if (!debug)
|
||
|
|
{
|
||
|
|
printf("%s: NE%d000 at %X:%d\n",
|
||
|
|
dep->de_name, dep->de_16bit ? 2 : 1,
|
||
|
|
dep->de_base_port, dep->de_irq);
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
printf("%s: Novell NE%d000 ethernet card at I/O address "
|
||
|
|
"0x%X, memory size 0x%X, irq %d\n",
|
||
|
|
dep->de_name, dep->de_16bit ? 2 : 1,
|
||
|
|
dep->de_base_port, dep->de_ramsize, dep->de_irq);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/*===========================================================================*
|
||
|
|
* test_8 *
|
||
|
|
*===========================================================================*/
|
||
|
|
static int test_8(dep, pos, pat)
|
||
|
|
dpeth_t *dep;
|
||
|
|
int pos;
|
||
|
|
u8_t *pat;
|
||
|
|
{
|
||
|
|
u8_t buf[4];
|
||
|
|
int i;
|
||
|
|
int r;
|
||
|
|
|
||
|
|
outb_reg0(dep, DP_ISR, 0xFF);
|
||
|
|
|
||
|
|
/* Setup a transfer to put the pattern. */
|
||
|
|
outb_reg0(dep, DP_RBCR0, 4);
|
||
|
|
outb_reg0(dep, DP_RBCR1, 0);
|
||
|
|
outb_reg0(dep, DP_RSAR0, pos & 0xFF);
|
||
|
|
outb_reg0(dep, DP_RSAR1, pos >> 8);
|
||
|
|
outb_reg0(dep, DP_CR, CR_DM_RW | CR_PS_P0 | CR_STA);
|
||
|
|
|
||
|
|
for (i= 0; i<4; i++)
|
||
|
|
outb_ne(dep, NE_DATA, pat[i]);
|
||
|
|
|
||
|
|
for (i= 0; i<N; i++)
|
||
|
|
{
|
||
|
|
if (inb_reg0(dep, DP_ISR) & ISR_RDC)
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
if (i == N)
|
||
|
|
{
|
||
|
|
if (debug)
|
||
|
|
{
|
||
|
|
printf("%s: NE1000 remote DMA test failed\n",
|
||
|
|
dep->de_name);
|
||
|
|
}
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
outb_reg0(dep, DP_RBCR0, 4);
|
||
|
|
outb_reg0(dep, DP_RBCR1, 0);
|
||
|
|
outb_reg0(dep, DP_RSAR0, pos & 0xFF);
|
||
|
|
outb_reg0(dep, DP_RSAR1, pos >> 8);
|
||
|
|
outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);
|
||
|
|
|
||
|
|
for (i= 0; i<4; i++)
|
||
|
|
buf[i]= inb_ne(dep, NE_DATA);
|
||
|
|
|
||
|
|
r= (memcmp(buf, pat, 4) == 0);
|
||
|
|
return r;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*===========================================================================*
|
||
|
|
* test_16 *
|
||
|
|
*===========================================================================*/
|
||
|
|
static int test_16(dep, pos, pat)
|
||
|
|
dpeth_t *dep;
|
||
|
|
int pos;
|
||
|
|
u8_t *pat;
|
||
|
|
{
|
||
|
|
u8_t buf[4];
|
||
|
|
int i;
|
||
|
|
int r;
|
||
|
|
|
||
|
|
outb_reg0(dep, DP_ISR, 0xFF);
|
||
|
|
|
||
|
|
/* Setup a transfer to put the pattern. */
|
||
|
|
outb_reg0(dep, DP_RBCR0, 4);
|
||
|
|
outb_reg0(dep, DP_RBCR1, 0);
|
||
|
|
outb_reg0(dep, DP_RSAR0, pos & 0xFF);
|
||
|
|
outb_reg0(dep, DP_RSAR1, pos >> 8);
|
||
|
|
outb_reg0(dep, DP_CR, CR_DM_RW | CR_PS_P0 | CR_STA);
|
||
|
|
|
||
|
|
for (i= 0; i<4; i += 2)
|
||
|
|
{
|
||
|
|
outw_ne(dep, NE_DATA, *(u16_t *)(pat+i));
|
||
|
|
}
|
||
|
|
|
||
|
|
for (i= 0; i<N; i++)
|
||
|
|
{
|
||
|
|
if (inb_reg0(dep, DP_ISR) & ISR_RDC)
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
if (i == N)
|
||
|
|
{
|
||
|
|
if (debug)
|
||
|
|
{
|
||
|
|
printf("%s: NE2000 remote DMA test failed\n",
|
||
|
|
dep->de_name);
|
||
|
|
}
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
outb_reg0(dep, DP_RBCR0, 4);
|
||
|
|
outb_reg0(dep, DP_RBCR1, 0);
|
||
|
|
outb_reg0(dep, DP_RSAR0, pos & 0xFF);
|
||
|
|
outb_reg0(dep, DP_RSAR1, pos >> 8);
|
||
|
|
outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);
|
||
|
|
|
||
|
|
for (i= 0; i<4; i += 2)
|
||
|
|
{
|
||
|
|
*(u16_t *)(buf+i)= inw_ne(dep, NE_DATA);
|
||
|
|
}
|
||
|
|
|
||
|
|
r= (memcmp(buf, pat, 4) == 0);
|
||
|
|
return r;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*===========================================================================*
|
||
|
|
* ne_stop *
|
||
|
|
*===========================================================================*/
|
||
|
|
static void ne_stop(dep)
|
||
|
|
dpeth_t *dep;
|
||
|
|
{
|
||
|
|
int byte;
|
||
|
|
|
||
|
|
/* Reset the ethernet card */
|
||
|
|
byte= inb_ne(dep, NE_RESET);
|
||
|
|
milli_delay(2);
|
||
|
|
outb_ne(dep, NE_RESET, byte);
|
||
|
|
}
|
||
|
|
|
||
|
|
static void milli_delay(unsigned long millis)
|
||
|
|
{
|
||
|
|
tickdelay(MILLIS_TO_TICKS(millis));
|
||
|
|
}
|
||
|
|
|
||
|
|
#endif /* ENABLE_NE2000 */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* $PchId: ne2000.c,v 1.10 2004/08/03 12:03:00 philip Exp $
|
||
|
|
*/
|