minix/drivers/fxp/fxp.c

3048 lines
73 KiB
C
Raw Normal View History

/*
* fxp.c
*
* This file contains an ethernet device driver for Intel 82557, 82558,
* 82559, 82550, and 82562 fast ethernet controllers.
*
* The valid messages and their parameters are:
*
2006-07-10 14:43:38 +02:00
* m_type DL_PORT DL_PROC DL_COUNT DL_MODE DL_ADDR DL_GRANT
* |------------+----------+---------+----------+---------+---------+---------|
* | HARDINT | | | | | | |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_WRITE | port nr | proc nr | count | mode | address | |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_WRITEV | port nr | proc nr | count | mode | address | |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_WRITEV_S| port nr | proc nr | count | mode | | grant |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_READ | port nr | proc nr | count | | address | |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_READV | port nr | proc nr | count | | address | |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_READV_S | port nr | proc nr | count | | | grant |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_CONF | port nr | proc nr | | mode | address | |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_GETSTAT | port nr | proc nr | | | address | |
* |------------|----------|---------|----------|---------|---------|---------|
* |DL_GETSTAT_S| port nr | proc nr | | | | grant |
* |------------|----------|---------|----------|---------|---------|---------|
* | DL_STOP | port_nr | | | | | |
* |------------+----------+---------+----------+---------+---------+---------|
*
* The messages sent are:
*
* m-type DL_PORT DL_PROC DL_COUNT DL_STAT DL_CLCK
* |-------------+----------+---------+----------+---------+---------|
* |DL_TASK_REPLY| port nr | proc nr | rd-count | err|stat| clock |
* |-------------+----------+---------+----------+---------+---------|
*
* m_type m3_i1 m3_i2 m3_ca1
* |-------------+---------+-----------+---------------|
2006-07-10 14:43:38 +02:00
* |DL_CONF_REPLY| port nr | last port | ethernet addr |
* |-------------+---------+-----------+---------------|
*
* m_type DL_PORT DL_STAT
* |------------|---------|-----------|
* |DL_STAT_REPL| port nr | err |
* |------------|---------|-----------|
*
*
* Created: Nov 2004 by Philip Homburg <philip@f-mnx.phicoh.com>
*/
#include "../drivers.h"
#include <stdlib.h>
#include <net/hton.h>
#include <net/gen/ether.h>
#include <net/gen/eth_io.h>
2005-12-02 15:45:10 +01:00
#include <ibm/pci.h>
#include <minix/ds.h>
#include <minix/endpoint.h>
#include <timers.h>
#define tmra_ut timer_t
#define tmra_inittimer(tp) tmr_inittimer(tp)
#define Proc_number(p) proc_number(p)
#define debug 0
#define RAND_UPDATE /**/
#define printW() ((void)0)
#define vm_1phys2bus(p) (p)
#include "assert.h"
#include "fxp.h"
#include "mii.h"
/* Number of receive buffers */
#define N_RX_BUF 40
/* Number of transmit buffers */
#define N_TX_BUF 4
/* I/O vectors are handled IOVEC_NR entries at a time. */
#define IOVEC_NR 16
/* Configuration */
#define FXP_ENVVAR "FXPETH"
struct pcitab
{
u16_t vid;
u16_t did;
int checkclass;
};
PRIVATE struct pcitab pcitab_fxp[]=
{
{ 0x8086, 0x1229, 0 }, /* Intel 82557, etc. */
{ 0x8086, 0x2449, 0 }, /* Intel 82801BA/BAM/CA/CAM */
2009-08-26 23:01:46 +02:00
{ 0x8086, 0x103d, 0 }, /* Intel 82801DB */
{ 0x8086, 0x1064, 0 }, /* Intel 82562 */
{ 0x0000, 0x0000, 0 }
};
#define FXP_PORT_NR 1 /* Minix */
typedef int irq_hook_t;
static timer_t *fxp_timers= NULL;
static clock_t fxp_next_timeout= 0;
/* ignore interrupt for the moment */
#define interrupt(x) 0
union tmpbuf
{
char pad[4096];
struct cbl_conf cc;
struct ias ias;
} *tmpbufp;
typedef struct fxp
{
port_t fxp_base_port;
int fxp_mode;
int fxp_got_int;
int fxp_send_int;
int fxp_flags;
int fxp_client;
int fxp_features; /* Needed? */
int fxp_irq;
int fxp_type; /* What kind of hardware */
int fxp_ee_addrlen; /* #EEPROM address bits */
int fxp_tx_alive;
int fxp_need_reset;
/* Rx */
vir_bytes fxp_read_s;
int fxp_rx_nbuf;
int fxp_rx_bufsize;
struct rfd *fxp_rx_buf;
phys_bytes fxp_rx_busaddr;
int fxp_rx_head;
int fxp_rx_need_restart;
int fxp_need_conf; /* Re-configure after draining send
* queue
*/
/* Tx */
int fxp_tx_nbuf;
int fxp_tx_bufsize;
struct tx *fxp_tx_buf;
phys_bytes fxp_tx_busaddr;
int fxp_tx_idle;
int fxp_tx_head;
int fxp_tx_tail;
int fxp_tx_threshold;
/* Link status */
int fxp_report_link;
int fxp_link_up;
int fxp_mii_busy;
u16_t fxp_mii_scr;
/* PCI related */
int fxp_seen; /* TRUE iff device available */
u8_t fxp_pcibus;
u8_t fxp_pcidev;
u8_t fxp_pcifunc;
/* 'large' items */
irq_hook_t fxp_hook;
ether_addr_t fxp_address;
message fxp_rx_mess;
message fxp_tx_mess;
struct sc fxp_stat;
u8_t fxp_conf_bytes[CC_BYTES_NR];
char fxp_name[sizeof("fxp#n")];
iovec_t fxp_iovec[IOVEC_NR];
2006-07-10 14:43:38 +02:00
iovec_s_t fxp_iovec_s[IOVEC_NR];
}
fxp_t;
/* fxp_mode */
#define FM_DISABLED 0x0
#define FM_ENABLED 0x1
/* fxp_flags */
#define FF_EMPTY 0x000
#define FF_PACK_SENT 0x001
#define FF_PACK_RECV 0x002
#define FF_SEND_AVAIL 0x004
#define FF_READING 0x010
#define FF_PROMISC 0x040
#define FF_MULTI 0x080
#define FF_BROAD 0x100
#define FF_ENABLED 0x200
/* fxp_features */
#define FFE_NONE 0x0
/* fxp_type */
#define FT_UNKNOWN 0x0
#define FT_82557 0x1
#define FT_82558A 0x2
#define FT_82559 0x4
2009-08-26 23:01:46 +02:00
#define FT_82801 0x8
static fxp_t *fxp_table;
phys_bytes fxp_table_phys;
static u16_t eth_ign_proto;
static tmra_ut fxp_watchdog;
static char *progname;
extern int errno;
u32_t system_hz;
#define fxp_inb(port, offset) (do_inb((port) + (offset)))
#define fxp_inw(port, offset) (do_inw((port) + (offset)))
#define fxp_inl(port, offset) (do_inl((port) + (offset)))
#define fxp_outb(port, offset, value) (do_outb((port) + (offset), (value)))
#define fxp_outw(port, offset, value) (do_outw((port) + (offset), (value)))
#define fxp_outl(port, offset, value) (do_outl((port) + (offset), (value)))
_PROTOTYPE( static void fxp_init, (message *mp) );
_PROTOTYPE( static void fxp_pci_conf, (void) );
_PROTOTYPE( static int fxp_probe, (fxp_t *fp) );
_PROTOTYPE( static void fxp_conf_hw, (fxp_t *fp) );
_PROTOTYPE( static void fxp_init_hw, (fxp_t *fp) );
_PROTOTYPE( static void fxp_init_buf, (fxp_t *fp) );
_PROTOTYPE( static void fxp_reset_hw, (fxp_t *fp) );
_PROTOTYPE( static void fxp_confaddr, (fxp_t *fp) );
_PROTOTYPE( static void fxp_rec_mode, (fxp_t *fp) );
_PROTOTYPE( static void fxp_writev, (message *mp, int from_int,
int vectored) );
2006-07-10 14:43:38 +02:00
_PROTOTYPE( static void fxp_writev_s, (message *mp, int from_int) );
_PROTOTYPE( static void fxp_readv, (message *mp, int from_int,
int vectored) );
2006-07-10 14:43:38 +02:00
_PROTOTYPE( static void fxp_readv_s, (message *mp, int from_int) );
_PROTOTYPE( static void fxp_do_conf, (fxp_t *fp) );
_PROTOTYPE( static void fxp_cu_ptr_cmd, (fxp_t *fp, int cmd,
phys_bytes bus_addr, int check_idle) );
_PROTOTYPE( static void fxp_ru_ptr_cmd, (fxp_t *fp, int cmd,
phys_bytes bus_addr, int check_idle) );
_PROTOTYPE( static void fxp_restart_ru, (fxp_t *fp) );
_PROTOTYPE( static void fxp_getstat, (message *mp) );
2006-07-10 14:43:38 +02:00
_PROTOTYPE( static void fxp_getstat_s, (message *mp) );
_PROTOTYPE( static void fxp_getname, (message *mp) );
_PROTOTYPE( static int fxp_handler, (fxp_t *fp) );
_PROTOTYPE( static void fxp_check_ints, (fxp_t *fp) );
_PROTOTYPE( static void fxp_watchdog_f, (timer_t *tp) );
_PROTOTYPE( static int fxp_link_changed, (fxp_t *fp) );
_PROTOTYPE( static void fxp_report_link, (fxp_t *fp) );
_PROTOTYPE( static void fxp_stop, (void));
_PROTOTYPE( static void reply, (fxp_t *fp, int err, int may_block) );
_PROTOTYPE( static void mess_reply, (message *req, message *reply) );
_PROTOTYPE( static u16_t eeprom_read, (fxp_t *fp, int reg) );
_PROTOTYPE( static void eeprom_addrsize, (fxp_t *fp) );
_PROTOTYPE( static u16_t mii_read, (fxp_t *fp, int reg) );
_PROTOTYPE( static void fxp_set_timer,(timer_t *tp, clock_t delta,
tmr_func_t watchdog) );
_PROTOTYPE( static void fxp_expire_timers,(void) );
_PROTOTYPE( static u8_t do_inb, (port_t port) );
_PROTOTYPE( static u32_t do_inl, (port_t port) );
_PROTOTYPE( static void do_outb, (port_t port, u8_t v) );
_PROTOTYPE( static void do_outl, (port_t port, u32_t v) );
_PROTOTYPE( static void tell_dev, (vir_bytes start, size_t size,
int pci_bus, int pci_dev, int pci_func) );
PRIVATE void handle_hw_intr(void)
{
int i, r;
fxp_t *fp;
for (i= 0, fp= &fxp_table[0]; i<FXP_PORT_NR; i++, fp++) {
if (fp->fxp_mode != FM_ENABLED)
return;
fxp_handler(fp);
r= sys_irqenable(&fp->fxp_hook);
if (r != OK) {
panic("FXP", "unable enable interrupts", r);
}
if (!fp->fxp_got_int)
return;
fp->fxp_got_int= 0;
assert(fp->fxp_flags & FF_ENABLED);
fxp_check_ints(fp);
}
}
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* SEF functions and variables. */
FORWARD _PROTOTYPE( void sef_local_startup, (void) );
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
FORWARD _PROTOTYPE( int sef_cb_init_fresh, (int type, sef_init_info_t *info) );
EXTERN int env_argc;
EXTERN char **env_argv;
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/*===========================================================================*
* main *
*===========================================================================*/
int main(int argc, char *argv[])
{
message m;
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
int r;
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* SEF local startup. */
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
env_setargs(argc, argv);
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
sef_local_startup();
while (TRUE)
{
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
if ((r= sef_receive(ANY, &m)) != OK)
panic("FXP","sef_receive failed", r);
if (is_notify(m.m_type)) {
switch (_ENDPOINT_P(m.m_source)) {
case HARDWARE:
handle_hw_intr();
break;
case PM_PROC_NR:
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
{
sigset_t set;
if (getsigset(&set) != 0) break;
if (sigismember(&set, SIGTERM))
fxp_stop();
break;
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
}
case CLOCK:
fxp_expire_timers();
break;
default:
panic("FXP"," illegal notify from", m.m_source);
}
/* get new message */
continue;
}
switch (m.m_type)
{
case DL_WRITEV: fxp_writev(&m, FALSE, TRUE); break;
case DL_WRITE: fxp_writev(&m, FALSE, FALSE); break;
2006-07-10 14:43:38 +02:00
case DL_WRITEV_S: fxp_writev_s(&m, FALSE); break;
case DL_READ: fxp_readv(&m, FALSE, FALSE); break;
case DL_READV: fxp_readv(&m, FALSE, TRUE); break;
2006-07-10 14:43:38 +02:00
case DL_READV_S: fxp_readv_s(&m, FALSE); break;
case DL_CONF: fxp_init(&m); break;
case DL_GETSTAT: fxp_getstat(&m); break;
2006-07-10 14:43:38 +02:00
case DL_GETSTAT_S: fxp_getstat_s(&m); break;
case DL_GETNAME: fxp_getname(&m); break;
default:
panic("FXP"," illegal message", m.m_type);
}
}
}
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/*===========================================================================*
* sef_local_startup *
*===========================================================================*/
PRIVATE void sef_local_startup()
{
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/* Register init callbacks. */
sef_setcb_init_fresh(sef_cb_init_fresh);
sef_setcb_init_restart(sef_cb_init_fresh);
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* No live update support for now. */
/* Let SEF perform startup. */
sef_startup();
}
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/*===========================================================================*
* sef_cb_init_fresh *
*===========================================================================*/
PRIVATE int sef_cb_init_fresh(int type, sef_init_info_t *info)
{
/* Initialize the fxp driver. */
int r;
u32_t tasknr;
long v;
vir_bytes ft;
ft = sizeof(*fxp_table)*FXP_PORT_NR;
system_hz = sys_hz();
if (env_argc < 1)
panic("FXP", "A head which at this time has no name", NO_NUM);
(progname=strrchr(env_argv[0],'/')) ? progname++
: (progname=env_argv[0]);
v= 0;
#if 0
(void) env_parse("ETH_IGN_PROTO", "x", 0, &v, 0x0000L, 0xFFFFL);
#endif
eth_ign_proto= htons((u16_t) v);
if(!(fxp_table = alloc_contig(ft, 0, &fxp_table_phys)))
panic("FXP","couldn't allocate table", ENOMEM);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
memset(fxp_table, 0, ft);
if((r=tsc_calibrate()) != OK)
panic("FXP","tsc_calibrate failed", r);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/* Try to notify inet that we are present (again) */
r= ds_retrieve_label_num("inet", &tasknr);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
if (r == OK)
notify(tasknr);
else if (r != ESRCH)
printf("fxp: ds_retrieve_label_num failed for 'inet': %d\n", r);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
return(OK);
}
/*===========================================================================*
* fxp_init *
*===========================================================================*/
static void fxp_init(mp)
message *mp;
{
static int first_time= 1;
int port;
fxp_t *fp;
message reply_mess;
if (first_time)
{
first_time= 0;
fxp_pci_conf(); /* Configure PCI devices. */
tmra_inittimer(&fxp_watchdog);
tmr_arg(&fxp_watchdog)->ta_int= 0;
fxp_set_timer(&fxp_watchdog, system_hz, fxp_watchdog_f);
}
port = mp->DL_PORT;
if (port < 0 || port >= FXP_PORT_NR)
{
2006-07-10 14:43:38 +02:00
reply_mess.m_type= DL_CONF_REPLY;
reply_mess.m3_i1= ENXIO;
mess_reply(mp, &reply_mess);
return;
}
fp= &fxp_table[port];
if (fp->fxp_mode == FM_DISABLED)
{
/* This is the default, try to (re)locate the device. */
fxp_conf_hw(fp);
if (fp->fxp_mode == FM_DISABLED)
{
/* Probe failed, or the device is configured off. */
2006-07-10 14:43:38 +02:00
reply_mess.m_type= DL_CONF_REPLY;
reply_mess.m3_i1= ENXIO;
mess_reply(mp, &reply_mess);
return;
}
if (fp->fxp_mode == FM_ENABLED)
fxp_init_hw(fp);
fxp_report_link(fp);
}
assert(fp->fxp_mode == FM_ENABLED);
assert(fp->fxp_flags & FF_ENABLED);
fp->fxp_flags &= ~(FF_PROMISC | FF_MULTI | FF_BROAD);
if (mp->DL_MODE & DL_PROMISC_REQ)
fp->fxp_flags |= FF_PROMISC;
if (mp->DL_MODE & DL_MULTI_REQ)
fp->fxp_flags |= FF_MULTI;
if (mp->DL_MODE & DL_BROAD_REQ)
fp->fxp_flags |= FF_BROAD;
fp->fxp_client = mp->m_source;
fxp_rec_mode(fp);
2006-07-10 14:43:38 +02:00
reply_mess.m_type = DL_CONF_REPLY;
reply_mess.m3_i1 = mp->DL_PORT;
reply_mess.m3_i2 = FXP_PORT_NR;
*(ether_addr_t *) reply_mess.m3_ca1 = fp->fxp_address;
mess_reply(mp, &reply_mess);
}
/*===========================================================================*
* fxp_pci_conf *
*===========================================================================*/
static void fxp_pci_conf()
{
static char envvar[] = FXP_ENVVAR "#";
static char envfmt[] = "*:d.d.d";
int i, h;
fxp_t *fp;
long v;
for (i= 0, fp= fxp_table; i<FXP_PORT_NR; i++, fp++)
{
strcpy(fp->fxp_name, "fxp#0");
fp->fxp_name[4] += i;
fp->fxp_seen= FALSE;
fp->fxp_features= FFE_NONE;
envvar[sizeof(FXP_ENVVAR)-1]= '0'+i;
#if 0
if (getenv(envvar) != NULL)
{
if (strcmp(getenv(envvar), "off") == 0)
{
fp->fxp_pcibus= 255;
continue;
}
if (!env_prefix(envvar, "pci"))
env_panic(envvar);
}
#endif
v= 0;
#if 0
(void) env_parse(envvar, envfmt, 1, &v, 0, 255);
#endif
fp->fxp_pcibus= v;
v= 0;
#if 0
(void) env_parse(envvar, envfmt, 2, &v, 0, 255);
#endif
fp->fxp_pcidev= v;
v= 0;
#if 0
(void) env_parse(envvar, envfmt, 3, &v, 0, 255);
#endif
fp->fxp_pcifunc= v;
}
pci_init();
for (h= 1; h >= 0; h--) {
for (i= 0, fp= fxp_table; i<FXP_PORT_NR; i++, fp++)
{
if (fp->fxp_pcibus == 255)
continue;
if (((fp->fxp_pcibus | fp->fxp_pcidev |
fp->fxp_pcifunc) != 0) != h)
{
continue;
}
if (fxp_probe(fp))
fp->fxp_seen= TRUE;
}
}
}
/*===========================================================================*
* fxp_probe *
*===========================================================================*/
static int fxp_probe(fp)
fxp_t *fp;
{
int i, r, devind, just_one;
u16_t vid, did;
u32_t bar;
u8_t ilr, rev;
char *dname, *str;
if ((fp->fxp_pcibus | fp->fxp_pcidev | fp->fxp_pcifunc) != 0)
{
/* Look for specific PCI device */
r= pci_find_dev(fp->fxp_pcibus, fp->fxp_pcidev,
fp->fxp_pcifunc, &devind);
if (r == 0)
{
printf("%s: no PCI device found at %d.%d.%d\n",
fp->fxp_name, fp->fxp_pcibus,
fp->fxp_pcidev, fp->fxp_pcifunc);
return FALSE;
}
pci_ids(devind, &vid, &did);
just_one= TRUE;
}
else
{
r= pci_first_dev(&devind, &vid, &did);
if (r == 0)
return FALSE;
just_one= FALSE;
}
for(;;)
{
for (i= 0; pcitab_fxp[i].vid != 0; i++)
{
if (pcitab_fxp[i].vid != vid)
continue;
if (pcitab_fxp[i].did != did)
continue;
if (pcitab_fxp[i].checkclass)
{
panic("FXP","fxp_probe: class check not implemented",
NO_NUM);
}
break;
}
if (pcitab_fxp[i].vid != 0)
break;
if (just_one)
{
printf(
"%s: wrong PCI device (%04x/%04x) found at %d.%d.%d\n",
fp->fxp_name, vid, did,
fp->fxp_pcibus,
fp->fxp_pcidev, fp->fxp_pcifunc);
return FALSE;
}
r= pci_next_dev(&devind, &vid, &did);
if (!r)
return FALSE;
}
dname= pci_dev_name(vid, did);
#if VERBOSE
if (!dname)
dname= "unknown device";
printf("%s: %s (%04x/%04x) at %s\n",
fp->fxp_name, dname, vid, did, pci_slot_name(devind));
#endif
pci_reserve(devind);
bar= pci_attr_r32(devind, PCI_BAR_2) & 0xffffffe0;
2005-11-03 14:42:56 +01:00
if (bar < 0x400)
{
panic("FXP","fxp_probe: base address is not properly configured",
NO_NUM);
}
fp->fxp_base_port= bar;
ilr= pci_attr_r8(devind, PCI_ILR);
fp->fxp_irq= ilr;
if (debug)
{
printf("%s: using I/O address 0x%lx, IRQ %d\n",
fp->fxp_name, (unsigned long)bar, ilr);
}
rev= pci_attr_r8(devind, PCI_REV);
str= NULL;
fp->fxp_type= FT_UNKNOWN;
switch(rev)
{
case FXP_REV_82557A: str= "82557A"; /* 0x01 */
fp->fxp_type= FT_82557;
break;
case FXP_REV_82557B: str= "82557B"; break; /* 0x02 */
case FXP_REV_82557C: str= "82557C"; break; /* 0x03 */
case FXP_REV_82558A: str= "82558A"; /* 0x04 */
fp->fxp_type= FT_82558A;
break;
case FXP_REV_82558B: str= "82558B"; break; /* 0x05 */
case FXP_REV_82559A: str= "82559A"; break; /* 0x06 */
case FXP_REV_82559B: str= "82559B"; break; /* 0x07 */
case FXP_REV_82559C: str= "82559C"; /* 0x08 */
fp->fxp_type= FT_82559;
break;
2005-12-02 15:45:10 +01:00
case FXP_REV_82559ERA: str= "82559ER-A"; /* 0x09 */
fp->fxp_type= FT_82559;
break;
case FXP_REV_82550_1: str= "82550(1)"; /* 0x0C */
fp->fxp_type= FT_82559;
break;
case FXP_REV_82550_2: str= "82550(2)"; /* 0x0D */
fp->fxp_type= FT_82559;
break;
case FXP_REV_82550_3: str= "82550(3)"; /* 0x0E */
fp->fxp_type= FT_82559;
break;
case FXP_REV_82551_1: str= "82551(1)"; /* 0x0F */
fp->fxp_type= FT_82559;
break;
case FXP_REV_82551_2: str= "82551(2)"; /* 0x10 */
fp->fxp_type= FT_82559;
break;
2009-08-26 23:01:46 +02:00
case FXP_REV_82801DB: str= "82801DB"; /* 0x81 */
fp->fxp_type= FT_82801;
break;
}
#if VERBOSE
if (str)
printf("%s: device revision: %s\n", fp->fxp_name, str);
else
printf("%s: unknown revision: 0x%x\n", fp->fxp_name, rev);
#endif
if (fp->fxp_type == FT_UNKNOWN)
{
printf("fxp_probe: device is not supported by this driver\n");
return FALSE;
}
return TRUE;
}
/*===========================================================================*
* fxp_conf_hw *
*===========================================================================*/
static void fxp_conf_hw(fp)
fxp_t *fp;
{
int i;
int mwi, ext_stat1, ext_stat2, lim_fifo, i82503, fc;
fp->fxp_mode= FM_DISABLED; /* Superfluous */
if (!fp->fxp_seen)
return;
/* PCI device is present */
fp->fxp_mode= FM_ENABLED;
fp->fxp_flags= FF_EMPTY;
fp->fxp_got_int= 0;
fp->fxp_send_int= 0;
fp->fxp_ee_addrlen= 0; /* Unknown */
fp->fxp_need_reset= 0;
fp->fxp_report_link= 0;
fp->fxp_link_up= -1; /* Unknown */
fp->fxp_mii_busy= 0;
fp->fxp_read_s= 0;
fp->fxp_rx_need_restart= 0;
fp->fxp_need_conf= 0;
fp->fxp_tx_head= 0;
fp->fxp_tx_tail= 0;
fp->fxp_tx_alive= 0;
fp->fxp_tx_threshold= TXTT_MIN;
/* Try to come up with a sensible configuration for the current
* device. Unfortunately every device is different, defaults are
* not always zero, and some fields are re-used with a completely
* different interpretation. We start out with a sensible default
* for all devices and then add device specific changes.
*/
fp->fxp_conf_bytes[0]= CC_BYTES_NR;
fp->fxp_conf_bytes[1]= CTL_DEFAULT | CRL_DEFAULT;
fp->fxp_conf_bytes[2]= CAI_DEFAULT;
fp->fxp_conf_bytes[3]= 0;
fp->fxp_conf_bytes[4]= 0;
fp->fxp_conf_bytes[5]= 0;
fp->fxp_conf_bytes[6]= CCB6_ESC | CCB6_ETCB | CCB6_RES;
fp->fxp_conf_bytes[7]= CUR_1;
fp->fxp_conf_bytes[8]= CCB8_503_MII;
fp->fxp_conf_bytes[9]= 0;
fp->fxp_conf_bytes[10]= CLB_NORMAL | CPAL_DEFAULT | CCB10_NSAI |
CCB10_RES1;
fp->fxp_conf_bytes[11]= 0;
fp->fxp_conf_bytes[12]= CIS_DEFAULT;
fp->fxp_conf_bytes[13]= CCB13_DEFAULT;
fp->fxp_conf_bytes[14]= CCB14_DEFAULT;
fp->fxp_conf_bytes[15]= CCB15_RES1 | CCB15_RES2;
fp->fxp_conf_bytes[16]= CCB16_DEFAULT;
fp->fxp_conf_bytes[17]= CCB17_DEFAULT;
fp->fxp_conf_bytes[18]= CCB18_RES1 | CCB18_PFCT | CCB18_PE;
fp->fxp_conf_bytes[19]= CCB19_FDPE;
fp->fxp_conf_bytes[20]= CCB20_PFCL | CCB20_RES1;
fp->fxp_conf_bytes[21]= CCB21_RES21;
#if VERBOSE
for (i= 0; i<CC_BYTES_NR; i++)
printf("%d: %0x, ", i, fp->fxp_conf_bytes[i]);
printf("\n");
#endif
mwi= 0; /* Do we want "Memory Write and Invalidate"? */
ext_stat1= 0; /* Do we want extended statistical counters? */
ext_stat2= 0; /* Do we want even more statistical counters? */
lim_fifo= 0; /* Limit number of frame in TX FIFO */
i82503= 0; /* Older 10 Mbps interface on the 82557 */
fc= 0; /* Flow control */
switch(fp->fxp_type)
{
case FT_82557:
if (i82503)
{
fp->fxp_conf_bytes[8] &= ~CCB8_503_MII;
fp->fxp_conf_bytes[15] |= CCB15_CRSCDT;
}
break;
case FT_82558A:
case FT_82559:
2009-08-26 23:01:46 +02:00
case FT_82801:
if (mwi)
fp->fxp_conf_bytes[3] |= CCB3_MWIE;
if (ext_stat1)
fp->fxp_conf_bytes[6] &= ~CCB6_ESC;
if (ext_stat2)
fp->fxp_conf_bytes[6] &= ~CCB6_TCOSC;
if (lim_fifo)
fp->fxp_conf_bytes[7] |= CCB7_2FFIFO;
if (fc)
{
/* From FreeBSD driver */
fp->fxp_conf_bytes[16]= 0x1f;
fp->fxp_conf_bytes[17]= 0x01;
fp->fxp_conf_bytes[19] |= CCB19_FDRSTAFC |
CCB19_FDRSTOFC;
}
fp->fxp_conf_bytes[18] |= CCB18_LROK;
2009-08-26 23:01:46 +02:00
if (fp->fxp_type == FT_82801)
{
fp->fxp_conf_bytes[6] = 0xba; /* ctrl 1 */
fp->fxp_conf_bytes[15] = 0x48; /* promiscuous */
fp->fxp_conf_bytes[21] = 0x05; /* mc_all */
}
break;
default:
panic("FXP","fxp_conf_hw: bad device type", fp->fxp_type);
}
#if VERBOSE
for (i= 0; i<CC_BYTES_NR; i++)
printf("%d: %0x, ", i, fp->fxp_conf_bytes[i]);
printf("\n");
#endif
}
/*===========================================================================*
* fxp_init_hw *
*===========================================================================*/
static void fxp_init_hw(fp)
fxp_t *fp;
{
int i, r, isr;
port_t port;
u32_t bus_addr;
port= fp->fxp_base_port;
fxp_init_buf(fp);
fp->fxp_flags = FF_EMPTY;
fp->fxp_flags |= FF_ENABLED;
/* Set the interrupt handler and policy. Do not automatically
* reenable interrupts. Return the IRQ line number on interrupts.
*/
fp->fxp_hook = fp->fxp_irq;
r= sys_irqsetpolicy(fp->fxp_irq, 0, &fp->fxp_hook);
if (r != OK)
panic("FXP","sys_irqsetpolicy failed", r);
fxp_reset_hw(fp);
r= sys_irqenable(&fp->fxp_hook);
if (r != OK)
panic("FXP","sys_irqenable failed", r);
/* Reset PHY? */
fxp_do_conf(fp);
/* Set pointer to statistical counters */
r= sys_umap(SELF, VM_D, (vir_bytes)&fp->fxp_stat, sizeof(fp->fxp_stat),
&bus_addr);
if (r != OK)
panic("FXP","sys_umap failed", r);
fxp_cu_ptr_cmd(fp, SC_CU_LOAD_DCA, bus_addr, TRUE /* check idle */);
/* Ack previous interrupts */
isr= fxp_inb(port, SCB_INT_STAT);
fxp_outb(port, SCB_INT_STAT, isr);
/* Enable interrupts */
fxp_outb(port, SCB_INT_MASK, 0);
fxp_ru_ptr_cmd(fp, SC_RU_START, fp->fxp_rx_busaddr,
TRUE /* check idle */);
fxp_confaddr(fp);
if (debug)
{
printf("%s: Ethernet address ", fp->fxp_name);
for (i= 0; i < 6; i++)
{
printf("%x%c", fp->fxp_address.ea_addr[i],
i < 5 ? ':' : '\n');
}
}
}
/*===========================================================================*
* fxp_init_buf *
*===========================================================================*/
static void fxp_init_buf(fp)
fxp_t *fp;
{
size_t rx_totbufsize, tx_totbufsize, tot_bufsize, alloc_bufsize;
char *alloc_buf;
phys_bytes buf;
int i, r;
struct rfd *rfdp;
struct tx *txp;
phys_bytes ph;
fp->fxp_rx_nbuf= N_RX_BUF;
rx_totbufsize= fp->fxp_rx_nbuf * sizeof(struct rfd);
fp->fxp_rx_bufsize= rx_totbufsize;
fp->fxp_tx_nbuf= N_TX_BUF;
tx_totbufsize= fp->fxp_tx_nbuf * sizeof(struct tx);
fp->fxp_tx_bufsize= tx_totbufsize;
tot_bufsize= sizeof(*tmpbufp) + tx_totbufsize + rx_totbufsize;
if (tot_bufsize % 4096)
tot_bufsize += 4096 - (tot_bufsize % 4096);
alloc_bufsize= tot_bufsize;
alloc_buf= alloc_contig(alloc_bufsize, AC_ALIGN4K, &ph);
if (alloc_buf == NULL)
{
panic(__FILE__, "fxp_init_buf: unable to alloc_contig size",
alloc_bufsize);
}
buf= (phys_bytes)alloc_buf;
tell_dev((vir_bytes)buf, tot_bufsize, 0, 0, 0);
tmpbufp= (union tmpbuf *)buf;
fp->fxp_rx_buf= (struct rfd *)&tmpbufp[1];
r= sys_umap(SELF, VM_D, (vir_bytes)fp->fxp_rx_buf, rx_totbufsize,
&fp->fxp_rx_busaddr);
if (r != OK)
panic("FXP","sys_umap failed", r);
#if 0
printf("fxp_init_buf: got phys 0x%x for vir 0x%x\n",
fp->fxp_rx_busaddr, fp->fxp_rx_buf);
#endif
for (i= 0, rfdp= fp->fxp_rx_buf; i<fp->fxp_rx_nbuf; i++, rfdp++)
{
rfdp->rfd_status= 0;
rfdp->rfd_command= 0;
if (i != fp->fxp_rx_nbuf-1)
{
r= sys_umap(SELF, VM_D, (vir_bytes)&rfdp[1],
sizeof(rfdp[1]), &rfdp->rfd_linkaddr);
if (r != OK)
panic("FXP","sys_umap failed", r);
}
else
{
rfdp->rfd_linkaddr= fp->fxp_rx_busaddr;
rfdp->rfd_command |= RFDC_EL;
}
rfdp->rfd_reserved= 0;
rfdp->rfd_res= 0;
rfdp->rfd_size= sizeof(rfdp->rfd_buf);
}
fp->fxp_rx_head= 0;
fp->fxp_tx_buf= (struct tx *)((char *)fp->fxp_rx_buf+rx_totbufsize);
r= sys_umap(SELF, VM_D, (vir_bytes)fp->fxp_tx_buf,
(phys_bytes)tx_totbufsize, &fp->fxp_tx_busaddr);
if (r != OK)
panic("FXP","sys_umap failed", r);
for (i= 0, txp= fp->fxp_tx_buf; i<fp->fxp_tx_nbuf; i++, txp++)
{
txp->tx_status= 0;
txp->tx_command= TXC_EL | CBL_NOP; /* Just in case */
if (i != fp->fxp_tx_nbuf-1)
{
r= sys_umap(SELF, VM_D, (vir_bytes)&txp[1],
(phys_bytes)sizeof(txp[1]),
&txp->tx_linkaddr);
if (r != OK)
panic("FXP","sys_umap failed", r);
}
else
{
txp->tx_linkaddr= fp->fxp_tx_busaddr;
}
txp->tx_tbda= TX_TBDA_NIL;
txp->tx_size= 0;
txp->tx_tthresh= fp->fxp_tx_threshold;
txp->tx_ntbd= 0;
}
fp->fxp_tx_idle= 1;
}
/*===========================================================================*
* fxp_reset_hw *
*===========================================================================*/
static void fxp_reset_hw(fp)
fxp_t *fp;
{
/* Inline the function in init? */
port_t port;
port= fp->fxp_base_port;
/* Reset device */
fxp_outl(port, CSR_PORT, CP_CMD_SOFT_RESET);
tickdelay(micros_to_ticks(CSR_PORT_RESET_DELAY));
/* Disable interrupts */
fxp_outb(port, SCB_INT_MASK, SIM_M);
/* Set CU base to zero */
fxp_cu_ptr_cmd(fp, SC_CU_LOAD_BASE, 0, TRUE /* check idle */);
/* Set RU base to zero */
fxp_ru_ptr_cmd(fp, SC_RU_LOAD_BASE, 0, TRUE /* check idle */);
}
/*===========================================================================*
* fxp_confaddr *
*===========================================================================*/
static void fxp_confaddr(fp)
fxp_t *fp;
{
static char eakey[]= FXP_ENVVAR "#_EA";
static char eafmt[]= "x:x:x:x:x:x";
clock_t t0,t1;
int i, r;
port_t port;
u32_t bus_addr;
long v;
port= fp->fxp_base_port;
/* User defined ethernet address? */
eakey[sizeof(FXP_ENVVAR)-1]= '0' + (fp-fxp_table);
for (i= 0; i < 6; i++)
{
if (env_parse(eakey, eafmt, i, &v, 0x00L, 0xFFL) != EP_SET)
break;
fp->fxp_address.ea_addr[i]= v;
}
if (i != 0 && i != 6) env_panic(eakey); /* It's all or nothing */
if (i == 0)
{
/* Get ethernet address from EEPROM */
for (i= 0; i<3; i++)
{
v= eeprom_read(fp, i);
fp->fxp_address.ea_addr[i*2]= (v & 0xff);
fp->fxp_address.ea_addr[i*2+1]= ((v >> 8) & 0xff);
}
}
/* Tell NIC about ethernet address */
tmpbufp->ias.ias_status= 0;
tmpbufp->ias.ias_command= CBL_C_EL | CBL_AIS;
tmpbufp->ias.ias_linkaddr= 0;
memcpy(tmpbufp->ias.ias_ethaddr, fp->fxp_address.ea_addr,
sizeof(tmpbufp->ias.ias_ethaddr));
r= sys_umap(SELF, VM_D, (vir_bytes)&tmpbufp->ias,
(phys_bytes)sizeof(tmpbufp->ias), &bus_addr);
if (r != OK)
panic("FXP","sys_umap failed", r);
fxp_cu_ptr_cmd(fp, SC_CU_START, bus_addr, TRUE /* check idle */);
getuptime(&t0);
do {
/* Wait for CU command to complete */
if (tmpbufp->ias.ias_status & CBL_F_C)
break;
} while (getuptime(&t1)==OK && (t1-t0) < micros_to_ticks(1000));
if (!(tmpbufp->ias.ias_status & CBL_F_C))
panic("FXP","fxp_confaddr: CU command failed to complete", NO_NUM);
if (!(tmpbufp->ias.ias_status & CBL_F_OK))
panic("FXP","fxp_confaddr: CU command failed", NO_NUM);
#if VERBOSE
printf("%s: hardware ethernet address: ", fp->fxp_name);
for (i= 0; i<6; i++)
{
printf("%02x%s", fp->fxp_address.ea_addr[i],
i < 5 ? ":" : "");
}
printf("\n");
#endif
}
/*===========================================================================*
* fxp_rec_mode *
*===========================================================================*/
static void fxp_rec_mode(fp)
fxp_t *fp;
{
fp->fxp_conf_bytes[0]= CC_BYTES_NR; /* Just to be sure */
fp->fxp_conf_bytes[15] &= ~(CCB15_BD|CCB15_PM);
fp->fxp_conf_bytes[21] &= ~CCB21_MA;
if (fp->fxp_flags & FF_PROMISC)
fp->fxp_conf_bytes[15] |= CCB15_PM;
if (fp->fxp_flags & FF_MULTI)
fp->fxp_conf_bytes[21] |= CCB21_MA;
if (!(fp->fxp_flags & (FF_BROAD|FF_MULTI|FF_PROMISC)))
fp->fxp_conf_bytes[15] |= CCB15_BD;
/* Queue request if not idle */
if (fp->fxp_tx_idle)
{
fxp_do_conf(fp);
}
else
{
printf("fxp_rec_mode: setting fxp_need_conf\n");
fp->fxp_need_conf= TRUE;
}
}
/*===========================================================================*
* fxp_writev *
*===========================================================================*/
static void fxp_writev(mp, from_int, vectored)
message *mp;
int from_int;
int vectored;
{
vir_bytes iov_src;
int i, j, n, o, r, s, dl_port, count, size, prev_head;
int fxp_client, fxp_tx_nbuf, fxp_tx_head;
u16_t tx_command;
fxp_t *fp;
iovec_t *iovp;
struct tx *txp, *prev_txp;
dl_port = mp->DL_PORT;
count = mp->DL_COUNT;
if (dl_port < 0 || dl_port >= FXP_PORT_NR)
panic("FXP","fxp_writev: illegal port", dl_port);
fp= &fxp_table[dl_port];
fxp_client= mp->DL_PROC;
fp->fxp_client= fxp_client;
assert(fp->fxp_mode == FM_ENABLED);
assert(fp->fxp_flags & FF_ENABLED);
if (from_int)
{
assert(fp->fxp_flags & FF_SEND_AVAIL);
fp->fxp_flags &= ~FF_SEND_AVAIL;
fp->fxp_tx_alive= TRUE;
}
if (fp->fxp_tx_idle)
{
txp= fp->fxp_tx_buf;
fxp_tx_head= 0; /* lint */
prev_txp= NULL; /* lint */
}
else
{
fxp_tx_nbuf= fp->fxp_tx_nbuf;
prev_head= fp->fxp_tx_head;
fxp_tx_head= prev_head+1;
if (fxp_tx_head == fxp_tx_nbuf)
fxp_tx_head= 0;
assert(fxp_tx_head < fxp_tx_nbuf);
if (fxp_tx_head == fp->fxp_tx_tail)
{
/* Send queue is full */
assert(!(fp->fxp_flags & FF_SEND_AVAIL));
fp->fxp_flags |= FF_SEND_AVAIL;
goto suspend;
}
prev_txp= &fp->fxp_tx_buf[prev_head];
txp= &fp->fxp_tx_buf[fxp_tx_head];
}
assert(!(fp->fxp_flags & FF_SEND_AVAIL));
assert(!(fp->fxp_flags & FF_PACK_SENT));
if (vectored)
{
iov_src = (vir_bytes)mp->DL_ADDR;
size= 0;
o= 0;
for (i= 0; i<count; i += IOVEC_NR,
iov_src += IOVEC_NR * sizeof(fp->fxp_iovec[0]))
{
n= IOVEC_NR;
if (i+n > count)
n= count-i;
r= sys_vircopy(fxp_client, D, iov_src,
SELF, D, (vir_bytes)fp->fxp_iovec,
n * sizeof(fp->fxp_iovec[0]));
if (r != OK)
panic("FXP","fxp_writev: sys_vircopy failed", r);
for (j= 0, iovp= fp->fxp_iovec; j<n; j++, iovp++)
{
s= iovp->iov_size;
if (size + s > ETH_MAX_PACK_SIZE_TAGGED)
{
panic("FXP","fxp_writev: invalid packet size",
NO_NUM);
}
r= sys_vircopy(fxp_client, D, iovp->iov_addr,
SELF, D, (vir_bytes)(txp->tx_buf+o),
s);
if (r != OK)
{
panic("FXP","fxp_writev: sys_vircopy failed",
r);
}
size += s;
o += s;
}
}
if (size < ETH_MIN_PACK_SIZE)
panic("FXP","fxp_writev: invalid packet size", size);
}
else
{
size= mp->DL_COUNT;
if (size < ETH_MIN_PACK_SIZE || size > ETH_MAX_PACK_SIZE_TAGGED)
panic("FXP","fxp_writev: invalid packet size", size);
r= sys_vircopy(fxp_client, D, (vir_bytes)mp->DL_ADDR,
SELF, D, (vir_bytes)txp->tx_buf, size);
if (r != OK)
panic("FXP","fxp_writev: sys_vircopy failed", r);
}
txp->tx_status= 0;
txp->tx_command= TXC_EL | CBL_XMIT;
txp->tx_tbda= TX_TBDA_NIL;
txp->tx_size= TXSZ_EOF | size;
txp->tx_tthresh= fp->fxp_tx_threshold;
txp->tx_ntbd= 0;
if (fp->fxp_tx_idle)
{
fp->fxp_tx_idle= 0;
fp->fxp_tx_head= fp->fxp_tx_tail= 0;
fxp_cu_ptr_cmd(fp, SC_CU_START, fp->fxp_tx_busaddr,
TRUE /* check idle */);
}
else
{
/* Link new request in transmit list */
tx_command= prev_txp->tx_command;
assert(tx_command == (TXC_EL | CBL_XMIT));
prev_txp->tx_command= CBL_XMIT;
fp->fxp_tx_head= fxp_tx_head;
}
fp->fxp_flags |= FF_PACK_SENT;
/* If the interrupt handler called, don't send a reply. The reply
* will be sent after all interrupts are handled.
*/
if (from_int)
return;
reply(fp, OK, FALSE);
return;
suspend:
if (from_int)
panic("FXP","fxp: should not be sending\n", NO_NUM);
fp->fxp_tx_mess= *mp;
reply(fp, OK, FALSE);
}
2006-07-10 14:43:38 +02:00
/*===========================================================================*
* fxp_writev_s *
*===========================================================================*/
static void fxp_writev_s(mp, from_int)
message *mp;
int from_int;
{
cp_grant_id_t iov_grant;
vir_bytes iov_offset;
int i, j, n, o, r, s, dl_port, count, size, prev_head;
int fxp_client, fxp_tx_nbuf, fxp_tx_head;
u16_t tx_command;
fxp_t *fp;
iovec_s_t *iovp;
struct tx *txp, *prev_txp;
dl_port = mp->DL_PORT;
count = mp->DL_COUNT;
if (dl_port < 0 || dl_port >= FXP_PORT_NR)
panic("FXP","fxp_writev: illegal port", dl_port);
fp= &fxp_table[dl_port];
fxp_client= mp->DL_PROC;
fp->fxp_client= fxp_client;
assert(fp->fxp_mode == FM_ENABLED);
assert(fp->fxp_flags & FF_ENABLED);
if (from_int)
{
assert(fp->fxp_flags & FF_SEND_AVAIL);
fp->fxp_flags &= ~FF_SEND_AVAIL;
fp->fxp_tx_alive= TRUE;
}
if (fp->fxp_tx_idle)
{
txp= fp->fxp_tx_buf;
fxp_tx_head= 0; /* lint */
prev_txp= NULL; /* lint */
}
else
{
fxp_tx_nbuf= fp->fxp_tx_nbuf;
prev_head= fp->fxp_tx_head;
fxp_tx_head= prev_head+1;
if (fxp_tx_head == fxp_tx_nbuf)
fxp_tx_head= 0;
assert(fxp_tx_head < fxp_tx_nbuf);
if (fxp_tx_head == fp->fxp_tx_tail)
{
/* Send queue is full */
assert(!(fp->fxp_flags & FF_SEND_AVAIL));
fp->fxp_flags |= FF_SEND_AVAIL;
goto suspend;
}
prev_txp= &fp->fxp_tx_buf[prev_head];
txp= &fp->fxp_tx_buf[fxp_tx_head];
}
assert(!(fp->fxp_flags & FF_SEND_AVAIL));
assert(!(fp->fxp_flags & FF_PACK_SENT));
iov_grant= mp->DL_GRANT;
size= 0;
o= 0;
iov_offset= 0;
for (i= 0; i<count; i += IOVEC_NR,
iov_offset += IOVEC_NR * sizeof(fp->fxp_iovec_s[0]))
{
n= IOVEC_NR;
if (i+n > count)
n= count-i;
r= sys_safecopyfrom(fxp_client, iov_grant, iov_offset,
(vir_bytes)fp->fxp_iovec_s,
n * sizeof(fp->fxp_iovec_s[0]), D);
if (r != OK)
panic("FXP","fxp_writev: sys_safecopyfrom failed", r);
for (j= 0, iovp= fp->fxp_iovec_s; j<n; j++, iovp++)
{
s= iovp->iov_size;
if (size + s > ETH_MAX_PACK_SIZE_TAGGED)
{
panic("FXP","fxp_writev: invalid packet size",
size + s);
}
r= sys_safecopyfrom(fxp_client, iovp->iov_grant,
0, (vir_bytes)(txp->tx_buf+o), s, D);
if (r != OK)
{
panic("FXP",
"fxp_writev_s: sys_safecopyfrom failed",
r);
}
size += s;
o += s;
}
}
if (size < ETH_MIN_PACK_SIZE)
panic("FXP","fxp_writev: invalid packet size", size);
txp->tx_status= 0;
txp->tx_command= TXC_EL | CBL_XMIT;
txp->tx_tbda= TX_TBDA_NIL;
txp->tx_size= TXSZ_EOF | size;
txp->tx_tthresh= fp->fxp_tx_threshold;
txp->tx_ntbd= 0;
if (fp->fxp_tx_idle)
{
fp->fxp_tx_idle= 0;
fp->fxp_tx_head= fp->fxp_tx_tail= 0;
fxp_cu_ptr_cmd(fp, SC_CU_START, fp->fxp_tx_busaddr,
TRUE /* check idle */);
}
else
{
/* Link new request in transmit list */
tx_command= prev_txp->tx_command;
assert(tx_command == (TXC_EL | CBL_XMIT));
prev_txp->tx_command= CBL_XMIT;
fp->fxp_tx_head= fxp_tx_head;
}
fp->fxp_flags |= FF_PACK_SENT;
/* If the interrupt handler called, don't send a reply. The reply
* will be sent after all interrupts are handled.
*/
if (from_int)
return;
reply(fp, OK, FALSE);
return;
suspend:
if (from_int)
panic("FXP","fxp: should not be sending\n", NO_NUM);
fp->fxp_tx_mess= *mp;
reply(fp, OK, FALSE);
}
/*===========================================================================*
* fxp_readv *
*===========================================================================*/
static void fxp_readv(mp, from_int, vectored)
message *mp;
int from_int;
int vectored;
{
int i, j, n, o, r, s, dl_port, fxp_client, count, size,
fxp_rx_head, fxp_rx_nbuf;
port_t port;
unsigned packlen;
vir_bytes iov_src;
u16_t rfd_status;
u16_t rfd_res;
u8_t scb_status;
fxp_t *fp;
iovec_t *iovp;
struct rfd *rfdp, *prev_rfdp;
dl_port = mp->DL_PORT;
count = mp->DL_COUNT;
if (dl_port < 0 || dl_port >= FXP_PORT_NR)
panic("FXP","fxp_readv: illegal port", dl_port);
fp= &fxp_table[dl_port];
fxp_client= mp->DL_PROC;
fp->fxp_client= fxp_client;
assert(fp->fxp_mode == FM_ENABLED);
assert(fp->fxp_flags & FF_ENABLED);
port= fp->fxp_base_port;
fxp_rx_head= fp->fxp_rx_head;
rfdp= &fp->fxp_rx_buf[fxp_rx_head];
rfd_status= rfdp->rfd_status;
if (!(rfd_status & RFDS_C))
{
/* Receive buffer is empty, suspend */
goto suspend;
}
if (!rfd_status & RFDS_OK)
{
/* Not OK? What happened? */
assert(0);
}
else
{
assert(!(rfd_status & (RFDS_CRCERR | RFDS_ALIGNERR |
RFDS_OUTOFBUF | RFDS_DMAOVR | RFDS_TOOSHORT |
RFDS_RXERR)));
}
rfd_res= rfdp->rfd_res;
assert(rfd_res & RFDR_EOF);
assert(rfd_res & RFDR_F);
packlen= rfd_res & RFDSZ_SIZE;
if (vectored)
{
iov_src = (vir_bytes)mp->DL_ADDR;
size= 0;
o= 0;
for (i= 0; i<count; i += IOVEC_NR,
iov_src += IOVEC_NR * sizeof(fp->fxp_iovec[0]))
{
n= IOVEC_NR;
if (i+n > count)
n= count-i;
r= sys_vircopy(fxp_client, D, iov_src,
SELF, D, (vir_bytes)fp->fxp_iovec,
n * sizeof(fp->fxp_iovec[0]));
if (r != OK)
panic("FXP","fxp_readv: sys_vircopy failed", r);
for (j= 0, iovp= fp->fxp_iovec; j<n; j++, iovp++)
{
s= iovp->iov_size;
if (size + s > packlen)
{
assert(packlen > size);
s= packlen-size;
}
r= sys_vircopy(SELF, D,
(vir_bytes)(rfdp->rfd_buf+o),
fxp_client, D, iovp->iov_addr, s);
if (r != OK)
{
panic("FXP","fxp_readv: sys_vircopy failed",
r);
}
size += s;
if (size == packlen)
break;
o += s;
}
if (size == packlen)
break;
}
if (size < packlen)
{
assert(0);
}
}
else
{
assert(0);
}
fp->fxp_read_s= packlen;
fp->fxp_flags= (fp->fxp_flags & ~FF_READING) | FF_PACK_RECV;
/* Re-init the current buffer */
rfdp->rfd_status= 0;
rfdp->rfd_command= RFDC_EL;
rfdp->rfd_reserved= 0;
rfdp->rfd_res= 0;
rfdp->rfd_size= sizeof(rfdp->rfd_buf);
fxp_rx_nbuf= fp->fxp_rx_nbuf;
if (fxp_rx_head == 0)
{
prev_rfdp= &fp->fxp_rx_buf[fxp_rx_nbuf-1];
}
else
prev_rfdp= &rfdp[-1];
assert(prev_rfdp->rfd_command & RFDC_EL);
prev_rfdp->rfd_command &= ~RFDC_EL;
fxp_rx_head++;
if (fxp_rx_head == fxp_rx_nbuf)
fxp_rx_head= 0;
assert(fxp_rx_head < fxp_rx_nbuf);
fp->fxp_rx_head= fxp_rx_head;
if (!from_int)
reply(fp, OK, FALSE);
return;
suspend:
if (fp->fxp_rx_need_restart)
{
fp->fxp_rx_need_restart= 0;
/* Check the status of the RU */
scb_status= fxp_inb(port, SCB_STATUS);
if ((scb_status & SS_RUS_MASK) != SS_RU_NORES)
{
/* Race condition? */
printf("fxp_readv: restart race: 0x%x\n",
scb_status);
assert((scb_status & SS_RUS_MASK) == SS_RU_READY);
}
else
{
fxp_restart_ru(fp);
}
}
if (from_int)
{
assert(fp->fxp_flags & FF_READING);
/* No need to store any state */
return;
}
fp->fxp_rx_mess= *mp;
assert(!(fp->fxp_flags & FF_READING));
fp->fxp_flags |= FF_READING;
reply(fp, OK, FALSE);
}
2006-07-10 14:43:38 +02:00
/*===========================================================================*
* fxp_readv_s *
*===========================================================================*/
static void fxp_readv_s(mp, from_int)
message *mp;
int from_int;
{
int i, j, n, o, r, s, dl_port, fxp_client, count, size,
fxp_rx_head, fxp_rx_nbuf;
cp_grant_id_t iov_grant;
port_t port;
unsigned packlen;
vir_bytes iov_offset;
u16_t rfd_status;
u16_t rfd_res;
u8_t scb_status;
fxp_t *fp;
iovec_s_t *iovp;
struct rfd *rfdp, *prev_rfdp;
dl_port = mp->DL_PORT;
count = mp->DL_COUNT;
if (dl_port < 0 || dl_port >= FXP_PORT_NR)
panic("FXP","fxp_readv: illegal port", dl_port);
fp= &fxp_table[dl_port];
fxp_client= mp->DL_PROC;
fp->fxp_client= fxp_client;
assert(fp->fxp_mode == FM_ENABLED);
assert(fp->fxp_flags & FF_ENABLED);
port= fp->fxp_base_port;
fxp_rx_head= fp->fxp_rx_head;
rfdp= &fp->fxp_rx_buf[fxp_rx_head];
rfd_status= rfdp->rfd_status;
if (!(rfd_status & RFDS_C))
{
/* Receive buffer is empty, suspend */
goto suspend;
}
if (!rfd_status & RFDS_OK)
{
/* Not OK? What happened? */
assert(0);
}
else
{
assert(!(rfd_status & (RFDS_CRCERR | RFDS_ALIGNERR |
RFDS_OUTOFBUF | RFDS_DMAOVR | RFDS_TOOSHORT |
RFDS_RXERR)));
}
rfd_res= rfdp->rfd_res;
assert(rfd_res & RFDR_EOF);
assert(rfd_res & RFDR_F);
packlen= rfd_res & RFDSZ_SIZE;
iov_grant = mp->DL_GRANT;
size= 0;
o= 0;
iov_offset= 0;
for (i= 0; i<count; i += IOVEC_NR,
iov_offset += IOVEC_NR * sizeof(fp->fxp_iovec_s[0]))
{
n= IOVEC_NR;
if (i+n > count)
n= count-i;
r= sys_safecopyfrom(fxp_client, iov_grant, iov_offset,
(vir_bytes)fp->fxp_iovec_s,
n * sizeof(fp->fxp_iovec_s[0]), D);
if (r != OK)
panic("FXP","fxp_readv_s: sys_safecopyfrom failed", r);
for (j= 0, iovp= fp->fxp_iovec_s; j<n; j++, iovp++)
{
s= iovp->iov_size;
if (size + s > packlen)
{
assert(packlen > size);
s= packlen-size;
}
r= sys_safecopyto(fxp_client, iovp->iov_grant,
0, (vir_bytes)(rfdp->rfd_buf+o), s, D);
if (r != OK)
{
panic("FXP","fxp_readv: sys_safecopyto failed",
r);
}
size += s;
if (size == packlen)
break;
o += s;
}
if (size == packlen)
break;
}
if (size < packlen)
{
assert(0);
}
fp->fxp_read_s= packlen;
fp->fxp_flags= (fp->fxp_flags & ~FF_READING) | FF_PACK_RECV;
/* Re-init the current buffer */
rfdp->rfd_status= 0;
rfdp->rfd_command= RFDC_EL;
rfdp->rfd_reserved= 0;
rfdp->rfd_res= 0;
rfdp->rfd_size= sizeof(rfdp->rfd_buf);
fxp_rx_nbuf= fp->fxp_rx_nbuf;
if (fxp_rx_head == 0)
{
prev_rfdp= &fp->fxp_rx_buf[fxp_rx_nbuf-1];
}
else
prev_rfdp= &rfdp[-1];
assert(prev_rfdp->rfd_command & RFDC_EL);
prev_rfdp->rfd_command &= ~RFDC_EL;
fxp_rx_head++;
if (fxp_rx_head == fxp_rx_nbuf)
fxp_rx_head= 0;
assert(fxp_rx_head < fxp_rx_nbuf);
fp->fxp_rx_head= fxp_rx_head;
if (!from_int)
reply(fp, OK, FALSE);
return;
suspend:
if (fp->fxp_rx_need_restart)
{
fp->fxp_rx_need_restart= 0;
/* Check the status of the RU */
scb_status= fxp_inb(port, SCB_STATUS);
if ((scb_status & SS_RUS_MASK) != SS_RU_NORES)
{
/* Race condition? */
printf("fxp_readv: restart race: 0x%x\n",
scb_status);
assert((scb_status & SS_RUS_MASK) == SS_RU_READY);
}
else
{
fxp_restart_ru(fp);
}
}
if (from_int)
{
assert(fp->fxp_flags & FF_READING);
/* No need to store any state */
return;
}
fp->fxp_rx_mess= *mp;
assert(!(fp->fxp_flags & FF_READING));
fp->fxp_flags |= FF_READING;
reply(fp, OK, FALSE);
}
/*===========================================================================*
* fxp_do_conf *
*===========================================================================*/
static void fxp_do_conf(fp)
fxp_t *fp;
{
int r;
u32_t bus_addr;
clock_t t0,t1;
/* Configure device */
tmpbufp->cc.cc_status= 0;
tmpbufp->cc.cc_command= CBL_C_EL | CBL_CONF;
tmpbufp->cc.cc_linkaddr= 0;
memcpy(tmpbufp->cc.cc_bytes, fp->fxp_conf_bytes,
sizeof(tmpbufp->cc.cc_bytes));
r= sys_umap(SELF, VM_D, (vir_bytes)&tmpbufp->cc,
(phys_bytes)sizeof(tmpbufp->cc), &bus_addr);
if (r != OK)
panic("FXP","sys_umap failed", r);
fxp_cu_ptr_cmd(fp, SC_CU_START, bus_addr, TRUE /* check idle */);
getuptime(&t0);
do {
/* Wait for CU command to complete */
if (tmpbufp->cc.cc_status & CBL_F_C)
break;
} while (getuptime(&t1)==OK && (t1-t0) < micros_to_ticks(100000));
if (!(tmpbufp->cc.cc_status & CBL_F_C))
panic("FXP","fxp_do_conf: CU command failed to complete", NO_NUM);
if (!(tmpbufp->cc.cc_status & CBL_F_OK))
panic("FXP","fxp_do_conf: CU command failed", NO_NUM);
}
/*===========================================================================*
* fxp_cu_ptr_cmd *
*===========================================================================*/
static void fxp_cu_ptr_cmd(fp, cmd, bus_addr, check_idle)
fxp_t *fp;
int cmd;
phys_bytes bus_addr;
int check_idle;
{
clock_t t0,t1;
port_t port;
u8_t scb_cmd;
port= fp->fxp_base_port;
if (check_idle)
{
/* Consistency check. Make sure that CU is idle */
if ((fxp_inb(port, SCB_STATUS) & SS_CUS_MASK) != SS_CU_IDLE)
panic("FXP","fxp_cu_ptr_cmd: CU is not idle", NO_NUM);
}
fxp_outl(port, SCB_POINTER, bus_addr);
fxp_outb(port, SCB_CMD, cmd);
/* What is a reasonable time-out? There is nothing in the
* documentation. 1 ms should be enough.
*/
getuptime(&t0);
do {
/* Wait for CU command to be accepted */
scb_cmd= fxp_inb(port, SCB_CMD);
if ((scb_cmd & SC_CUC_MASK) == SC_CU_NOP)
break;
} while (getuptime(&t1)==OK && (t1-t0) < micros_to_ticks(100000));
if ((scb_cmd & SC_CUC_MASK) != SC_CU_NOP)
panic("FXP","fxp_cu_ptr_cmd: CU does not accept command", NO_NUM);
}
/*===========================================================================*
* fxp_ru_ptr_cmd *
*===========================================================================*/
static void fxp_ru_ptr_cmd(fp, cmd, bus_addr, check_idle)
fxp_t *fp;
int cmd;
phys_bytes bus_addr;
int check_idle;
{
clock_t t0,t1;
port_t port;
u8_t scb_cmd;
port= fp->fxp_base_port;
if (check_idle)
{
/* Consistency check, make sure that RU is idle */
if ((fxp_inb(port, SCB_STATUS) & SS_RUS_MASK) != SS_RU_IDLE)
panic("FXP","fxp_ru_ptr_cmd: RU is not idle", NO_NUM);
}
fxp_outl(port, SCB_POINTER, bus_addr);
fxp_outb(port, SCB_CMD, cmd);
getuptime(&t0);
do {
/* Wait for RU command to be accepted */
scb_cmd= fxp_inb(port, SCB_CMD);
if ((scb_cmd & SC_RUC_MASK) == SC_RU_NOP)
break;
} while (getuptime(&t1)==OK && (t1-t0) < micros_to_ticks(1000));
if ((scb_cmd & SC_RUC_MASK) != SC_RU_NOP)
panic("FXP","fxp_ru_ptr_cmd: RU does not accept command", NO_NUM);
}
/*===========================================================================*
* fxp_restart_ru *
*===========================================================================*/
static void fxp_restart_ru(fp)
fxp_t *fp;
{
int i, fxp_rx_nbuf;
port_t port;
struct rfd *rfdp;
port= fp->fxp_base_port;
fxp_rx_nbuf= fp->fxp_rx_nbuf;
for (i= 0, rfdp= fp->fxp_rx_buf; i<fxp_rx_nbuf; i++, rfdp++)
{
rfdp->rfd_status= 0;
rfdp->rfd_command= 0;
if (i == fp->fxp_rx_nbuf-1)
rfdp->rfd_command= RFDC_EL;
rfdp->rfd_reserved= 0;
rfdp->rfd_res= 0;
rfdp->rfd_size= sizeof(rfdp->rfd_buf);
}
fp->fxp_rx_head= 0;
/* Make sure that RU is in the 'No resources' state */
if ((fxp_inb(port, SCB_STATUS) & SS_RUS_MASK) != SS_RU_NORES)
panic("FXP","fxp_restart_ru: RU is in an unexpected state", NO_NUM);
fxp_ru_ptr_cmd(fp, SC_RU_START, fp->fxp_rx_busaddr,
FALSE /* do not check idle */);
}
/*===========================================================================*
* fxp_getstat *
*===========================================================================*/
static void fxp_getstat(mp)
message *mp;
{
clock_t t0,t1;
2006-07-10 14:43:38 +02:00
int r, dl_port;
port_t port;
fxp_t *fp;
u32_t *p;
eth_stat_t stats;
dl_port = mp->DL_PORT;
if (dl_port < 0 || dl_port >= FXP_PORT_NR)
panic("FXP","fxp_getstat: illegal port", dl_port);
fp= &fxp_table[dl_port];
fp->fxp_client= mp->DL_PROC;
assert(fp->fxp_mode == FM_ENABLED);
assert(fp->fxp_flags & FF_ENABLED);
port= fp->fxp_base_port;
p= &fp->fxp_stat.sc_tx_fcp;
*p= 0;
/* The dump commmand doesn't take a pointer. Setting a pointer
* doesn't hard though.
*/
fxp_cu_ptr_cmd(fp, SC_CU_DUMP_SC, 0, FALSE /* do not check idle */);
getuptime(&t0);
do {
/* Wait for CU command to complete */
if (*p != 0)
break;
} while (getuptime(&t1)==OK && (t1-t0) < micros_to_ticks(1000));
if (*p == 0)
panic("FXP","fxp_getstat: CU command failed to complete", NO_NUM);
if (*p != SCM_DSC)
panic("FXP","fxp_getstat: bad magic", NO_NUM);
stats.ets_recvErr=
fp->fxp_stat.sc_rx_crc +
fp->fxp_stat.sc_rx_align +
fp->fxp_stat.sc_rx_resource +
fp->fxp_stat.sc_rx_overrun +
fp->fxp_stat.sc_rx_cd +
fp->fxp_stat.sc_rx_short;
stats.ets_sendErr=
fp->fxp_stat.sc_tx_maxcol +
fp->fxp_stat.sc_tx_latecol +
fp->fxp_stat.sc_tx_crs;
stats.ets_OVW= fp->fxp_stat.sc_rx_overrun;
stats.ets_CRCerr= fp->fxp_stat.sc_rx_crc;
stats.ets_frameAll= fp->fxp_stat.sc_rx_align;
stats.ets_missedP= fp->fxp_stat.sc_rx_resource;
stats.ets_packetR= fp->fxp_stat.sc_rx_good;
stats.ets_packetT= fp->fxp_stat.sc_tx_good;
stats.ets_transDef= fp->fxp_stat.sc_tx_defered;
stats.ets_collision= fp->fxp_stat.sc_tx_totcol;
stats.ets_transAb= fp->fxp_stat.sc_tx_maxcol;
stats.ets_carrSense= fp->fxp_stat.sc_tx_crs;
stats.ets_fifoUnder= fp->fxp_stat.sc_tx_underrun;
stats.ets_fifoOver= fp->fxp_stat.sc_rx_overrun;
stats.ets_CDheartbeat= 0;
stats.ets_OWC= fp->fxp_stat.sc_tx_latecol;
2006-07-10 14:43:38 +02:00
r= sys_vircopy(SELF, D, (vir_bytes)&stats,
mp->DL_PROC, D, (vir_bytes) mp->DL_ADDR, sizeof(stats));
if (r != OK)
panic(__FILE__,"fxp_getstat: sys_vircopy failed", r);
mp->m_type= DL_STAT_REPLY;
mp->DL_PORT= dl_port;
mp->DL_STAT= OK;
r= send(mp->m_source, mp);
if (r != OK)
panic(__FILE__, "fxp_getstat: send failed: %d\n", r);
2006-07-10 14:43:38 +02:00
}
/*===========================================================================*
* fxp_getstat_s *
*===========================================================================*/
static void fxp_getstat_s(mp)
message *mp;
{
clock_t t0,t1;
int r, dl_port;
port_t port;
fxp_t *fp;
u32_t *p;
eth_stat_t stats;
dl_port = mp->DL_PORT;
if (dl_port < 0 || dl_port >= FXP_PORT_NR)
panic("FXP","fxp_getstat: illegal port", dl_port);
fp= &fxp_table[dl_port];
fp->fxp_client= mp->DL_PROC;
assert(fp->fxp_mode == FM_ENABLED);
assert(fp->fxp_flags & FF_ENABLED);
port= fp->fxp_base_port;
p= &fp->fxp_stat.sc_tx_fcp;
*p= 0;
/* The dump commmand doesn't take a pointer. Setting a pointer
* doesn't hurt though.
*/
fxp_cu_ptr_cmd(fp, SC_CU_DUMP_SC, 0, FALSE /* do not check idle */);
getuptime(&t0);
do {
/* Wait for CU command to complete */
if (*p != 0)
break;
} while (getuptime(&t1)==OK && (t1-t0) < micros_to_ticks(1000));
2006-07-10 14:43:38 +02:00
if (*p == 0)
panic("FXP","fxp_getstat: CU command failed to complete", NO_NUM);
if (*p != SCM_DSC)
panic("FXP","fxp_getstat: bad magic", NO_NUM);
stats.ets_recvErr=
fp->fxp_stat.sc_rx_crc +
fp->fxp_stat.sc_rx_align +
fp->fxp_stat.sc_rx_resource +
fp->fxp_stat.sc_rx_overrun +
fp->fxp_stat.sc_rx_cd +
fp->fxp_stat.sc_rx_short;
stats.ets_sendErr=
fp->fxp_stat.sc_tx_maxcol +
fp->fxp_stat.sc_tx_latecol +
fp->fxp_stat.sc_tx_crs;
stats.ets_OVW= fp->fxp_stat.sc_rx_overrun;
stats.ets_CRCerr= fp->fxp_stat.sc_rx_crc;
stats.ets_frameAll= fp->fxp_stat.sc_rx_align;
stats.ets_missedP= fp->fxp_stat.sc_rx_resource;
stats.ets_packetR= fp->fxp_stat.sc_rx_good;
stats.ets_packetT= fp->fxp_stat.sc_tx_good;
stats.ets_transDef= fp->fxp_stat.sc_tx_defered;
stats.ets_collision= fp->fxp_stat.sc_tx_totcol;
stats.ets_transAb= fp->fxp_stat.sc_tx_maxcol;
stats.ets_carrSense= fp->fxp_stat.sc_tx_crs;
stats.ets_fifoUnder= fp->fxp_stat.sc_tx_underrun;
stats.ets_fifoOver= fp->fxp_stat.sc_rx_overrun;
stats.ets_CDheartbeat= 0;
stats.ets_OWC= fp->fxp_stat.sc_tx_latecol;
r= sys_safecopyto(mp->DL_PROC, mp->DL_GRANT, 0, (vir_bytes)&stats,
sizeof(stats), D);
if (r != OK)
panic(__FILE__,"fxp_getstat_s: sys_safecopyto failed", r);
mp->m_type= DL_STAT_REPLY;
mp->DL_PORT= dl_port;
mp->DL_STAT= OK;
r= send(mp->m_source, mp);
if (r != OK)
panic(__FILE__, "fxp_getstat_s: send failed: %d\n", r);
}
/*===========================================================================*
* fxp_getname *
*===========================================================================*/
static void fxp_getname(mp)
message *mp;
{
int r;
strncpy(mp->DL_NAME, progname, sizeof(mp->DL_NAME));
mp->DL_NAME[sizeof(mp->DL_NAME)-1]= '\0';
mp->m_type= DL_NAME_REPLY;
r= send(mp->m_source, mp);
if (r != OK)
2005-10-21 20:20:26 +02:00
panic("FXP", "fxp_getname: send failed", r);
}
/*===========================================================================*
* fxp_handler *
*===========================================================================*/
static int fxp_handler(fp)
fxp_t *fp;
{
int port;
u16_t isr;
RAND_UPDATE
port= fp->fxp_base_port;
/* Ack interrupt */
isr= fxp_inb(port, SCB_INT_STAT);
fxp_outb(port, SCB_INT_STAT, isr);
if (isr & SIS_FR)
{
isr &= ~SIS_FR;
if (!fp->fxp_got_int && (fp->fxp_flags & FF_READING))
{
fp->fxp_got_int= TRUE;
interrupt(fxp_tasknr);
}
}
if (isr & SIS_CNA)
{
isr &= ~SIS_CNA;
if (!fp->fxp_tx_idle)
{
fp->fxp_send_int= TRUE;
if (!fp->fxp_got_int)
{
fp->fxp_got_int= TRUE;
interrupt(fxp_tasknr);
}
}
}
if (isr & SIS_RNR)
{
isr &= ~SIS_RNR;
/* Assume that receive buffer is full of packets. fxp_readv
* will restart the RU.
*/
fp->fxp_rx_need_restart= 1;
}
if (isr)
{
printf("fxp_handler: unhandled interrupt: isr = 0x%02x\n",
isr);
}
return 1;
}
/*===========================================================================*
* fxp_check_ints *
*===========================================================================*/
static void fxp_check_ints(fp)
fxp_t *fp;
{
int n, fxp_flags, prev_tail;
int fxp_tx_tail, fxp_tx_nbuf, fxp_tx_threshold;
port_t port;
u32_t busaddr;
u16_t tx_status;
u8_t scb_status;
struct tx *txp;
fxp_flags= fp->fxp_flags;
if (fxp_flags & FF_READING)
{
if (!(fp->fxp_rx_buf[fp->fxp_rx_head].rfd_status & RFDS_C))
; /* Nothing */
else if (fp->fxp_rx_mess.m_type == DL_READV)
{
fxp_readv(&fp->fxp_rx_mess, TRUE /* from int */,
TRUE /* vectored */);
}
2006-07-10 14:43:38 +02:00
else if (fp->fxp_rx_mess.m_type == DL_READV_S)
{
fxp_readv_s(&fp->fxp_rx_mess, TRUE /* from int */);
}
else
{
assert(fp->fxp_rx_mess.m_type == DL_READ);
fxp_readv(&fp->fxp_rx_mess, TRUE /* from int */,
FALSE /* !vectored */);
}
}
if (fp->fxp_tx_idle)
; /* Nothing to do */
else if (fp->fxp_send_int)
{
fp->fxp_send_int= FALSE;
fxp_tx_tail= fp->fxp_tx_tail;
fxp_tx_nbuf= fp->fxp_tx_nbuf;
n= 0;
for (;;)
{
txp= &fp->fxp_tx_buf[fxp_tx_tail];
tx_status= txp->tx_status;
if (!(tx_status & TXS_C))
break;
n++;
assert(tx_status & TXS_OK);
if (tx_status & TXS_U)
{
fxp_tx_threshold= fp->fxp_tx_threshold;
if (fxp_tx_threshold < TXTT_MAX)
{
fxp_tx_threshold++;
fp->fxp_tx_threshold= fxp_tx_threshold;
}
printf(
"fxp_check_ints: fxp_tx_threshold = 0x%x\n",
fxp_tx_threshold);
}
if (txp->tx_command & TXC_EL)
{
fp->fxp_tx_idle= 1;
break;
}
fxp_tx_tail++;
if (fxp_tx_tail == fxp_tx_nbuf)
fxp_tx_tail= 0;
assert(fxp_tx_tail < fxp_tx_nbuf);
}
if (fp->fxp_need_conf)
{
/* Check the status of the CU */
port= fp->fxp_base_port;
scb_status= fxp_inb(port, SCB_STATUS);
if ((scb_status & SS_CUS_MASK) != SS_CU_IDLE)
{
/* Nothing to do */
printf("scb_status = 0x%x\n", scb_status);
}
else
{
printf("fxp_check_ints: fxp_need_conf\n");
fp->fxp_need_conf= FALSE;
fxp_do_conf(fp);
}
}
if (n)
{
if (!fp->fxp_tx_idle)
{
fp->fxp_tx_tail= fxp_tx_tail;
/* Check the status of the CU */
port= fp->fxp_base_port;
scb_status= fxp_inb(port, SCB_STATUS);
if ((scb_status & SS_CUS_MASK) != SS_CU_IDLE)
{
/* Nothing to do */
printf("scb_status = 0x%x\n",
scb_status);
}
else
{
if (fxp_tx_tail == 0)
prev_tail= fxp_tx_nbuf-1;
else
prev_tail= fxp_tx_tail-1;
busaddr= fp->fxp_tx_buf[prev_tail].
tx_linkaddr;
fxp_cu_ptr_cmd(fp, SC_CU_START,
busaddr, 1 /* check idle */);
}
}
if (fp->fxp_flags & FF_SEND_AVAIL)
{
if (fp->fxp_tx_mess.m_type == DL_WRITEV)
{
fxp_writev(&fp->fxp_tx_mess,
TRUE /* from int */,
TRUE /* vectored */);
}
2006-07-10 14:43:38 +02:00
else if (fp->fxp_tx_mess.m_type == DL_WRITEV_S)
{
fxp_writev_s(&fp->fxp_tx_mess,
TRUE /* from int */);
}
else
{
assert(fp->fxp_tx_mess.m_type ==
DL_WRITE);
fxp_writev(&fp->fxp_tx_mess,
TRUE /* from int */,
FALSE /* !vectored */);
}
}
}
}
if (fp->fxp_report_link)
fxp_report_link(fp);
if (fp->fxp_flags & (FF_PACK_SENT | FF_PACK_RECV))
reply(fp, OK, TRUE);
}
/*===========================================================================*
* fxp_watchdog_f *
*===========================================================================*/
static void fxp_watchdog_f(tp)
timer_t *tp;
{
int i;
fxp_t *fp;
tmr_arg(&fxp_watchdog)->ta_int= 0;
fxp_set_timer(&fxp_watchdog, system_hz, fxp_watchdog_f);
for (i= 0, fp = &fxp_table[0]; i<FXP_PORT_NR; i++, fp++)
{
if (fp->fxp_mode != FM_ENABLED)
continue;
/* Handle race condition, MII interface mgith be busy */
if(!fp->fxp_mii_busy)
{
/* Check the link status. */
if (fxp_link_changed(fp))
{
2005-08-04 10:07:29 +02:00
#if VERBOSE
printf("fxp_watchdog_f: link changed\n");
2005-08-04 10:07:29 +02:00
#endif
fp->fxp_report_link= TRUE;
fp->fxp_got_int= TRUE;
interrupt(fxp_tasknr);
}
}
if (!(fp->fxp_flags & FF_SEND_AVAIL))
{
/* Assume that an idle system is alive */
fp->fxp_tx_alive= TRUE;
continue;
}
if (fp->fxp_tx_alive)
{
fp->fxp_tx_alive= FALSE;
continue;
}
fp->fxp_need_reset= TRUE;
fp->fxp_got_int= TRUE;
interrupt(fxp_tasknr);
}
}
/*===========================================================================*
* fxp_link_changed *
*===========================================================================*/
static int fxp_link_changed(fp)
fxp_t *fp;
{
u16_t scr;
scr= mii_read(fp, MII_SCR);
scr &= ~(MII_SCR_RES|MII_SCR_RES_1);
return (fp->fxp_mii_scr != scr);
}
/*===========================================================================*
* fxp_report_link *
*===========================================================================*/
static void fxp_report_link(fp)
fxp_t *fp;
{
port_t port;
u16_t mii_ctrl, mii_status, mii_id1, mii_id2,
mii_ana, mii_anlpa, mii_ane, mii_extstat,
mii_ms_ctrl, mii_ms_status, scr;
u32_t oui;
int model, rev;
int f, link_up, ms_regs;
/* Assume an 82555 (compatible) PHY. The should be changed for
* 82557 NICs with different PHYs
*/
ms_regs= 0; /* No master/slave registers. */
fp->fxp_report_link= FALSE;
port= fp->fxp_base_port;
scr= mii_read(fp, MII_SCR);
scr &= ~(MII_SCR_RES|MII_SCR_RES_1);
fp->fxp_mii_scr= scr;
mii_ctrl= mii_read(fp, MII_CTRL);
mii_read(fp, MII_STATUS); /* Read the status register twice, why? */
mii_status= mii_read(fp, MII_STATUS);
mii_id1= mii_read(fp, MII_PHYID_H);
mii_id2= mii_read(fp, MII_PHYID_L);
mii_ana= mii_read(fp, MII_ANA);
mii_anlpa= mii_read(fp, MII_ANLPA);
mii_ane= mii_read(fp, MII_ANE);
if (mii_status & MII_STATUS_EXT_STAT)
mii_extstat= mii_read(fp, MII_EXT_STATUS);
else
mii_extstat= 0;
if (ms_regs)
{
mii_ms_ctrl= mii_read(fp, MII_MS_CTRL);
mii_ms_status= mii_read(fp, MII_MS_STATUS);
}
else
{
mii_ms_ctrl= 0;
mii_ms_status= 0;
}
/* How do we know about the link status? */
link_up= !!(mii_status & MII_STATUS_LS);
fp->fxp_link_up= link_up;
if (!link_up)
{
#if VERBOSE
printf("%s: link down\n", fp->fxp_name);
#endif
return;
}
oui= (mii_id1 << MII_PH_OUI_H_C_SHIFT) |
((mii_id2 & MII_PL_OUI_L_MASK) >> MII_PL_OUI_L_SHIFT);
model= ((mii_id2 & MII_PL_MODEL_MASK) >> MII_PL_MODEL_SHIFT);
rev= (mii_id2 & MII_PL_REV_MASK);
#if VERBOSE
printf("OUI 0x%06lx, Model 0x%02x, Revision 0x%x\n", oui, model, rev);
#endif
if (mii_ctrl & (MII_CTRL_LB|MII_CTRL_PD|MII_CTRL_ISO))
{
printf("%s: PHY: ", fp->fxp_name);
f= 1;
if (mii_ctrl & MII_CTRL_LB)
{
printf("loopback mode");
f= 0;
}
if (mii_ctrl & MII_CTRL_PD)
{
if (!f) printf(", ");
f= 0;
printf("powered down");
}
if (mii_ctrl & MII_CTRL_ISO)
{
if (!f) printf(", ");
f= 0;
printf("isolated");
}
printf("\n");
return;
}
if (!(mii_ctrl & MII_CTRL_ANE))
{
printf("%s: manual config: ", fp->fxp_name);
switch(mii_ctrl & (MII_CTRL_SP_LSB|MII_CTRL_SP_MSB))
{
case MII_CTRL_SP_10: printf("10 Mbps"); break;
case MII_CTRL_SP_100: printf("100 Mbps"); break;
case MII_CTRL_SP_1000: printf("1000 Mbps"); break;
case MII_CTRL_SP_RES: printf("reserved speed"); break;
}
if (mii_ctrl & MII_CTRL_DM)
printf(", full duplex");
else
printf(", half duplex");
printf("\n");
return;
}
if (!debug) goto resspeed;
printf("%s: ", fp->fxp_name);
mii_print_stat_speed(mii_status, mii_extstat);
printf("\n");
if (!(mii_status & MII_STATUS_ANC))
printf("%s: auto-negotiation not complete\n", fp->fxp_name);
if (mii_status & MII_STATUS_RF)
printf("%s: remote fault detected\n", fp->fxp_name);
if (!(mii_status & MII_STATUS_ANA))
{
printf("%s: local PHY has no auto-negotiation ability\n",
fp->fxp_name);
}
if (!(mii_status & MII_STATUS_LS))
printf("%s: link down\n", fp->fxp_name);
if (mii_status & MII_STATUS_JD)
printf("%s: jabber condition detected\n", fp->fxp_name);
if (!(mii_status & MII_STATUS_EC))
{
printf("%s: no extended register set\n", fp->fxp_name);
goto resspeed;
}
if (!(mii_status & MII_STATUS_ANC))
goto resspeed;
printf("%s: local cap.: ", fp->fxp_name);
if (mii_ms_ctrl & (MII_MSC_1000T_FD | MII_MSC_1000T_HD))
{
printf("1000 Mbps: T-");
switch(mii_ms_ctrl & (MII_MSC_1000T_FD | MII_MSC_1000T_HD))
{
case MII_MSC_1000T_FD: printf("FD"); break;
case MII_MSC_1000T_HD: printf("HD"); break;
default: printf("FD/HD"); break;
}
if (mii_ana)
printf(", ");
}
mii_print_techab(mii_ana);
printf("\n");
if (mii_ane & MII_ANE_PDF)
printf("%s: parallel detection fault\n", fp->fxp_name);
if (!(mii_ane & MII_ANE_LPANA))
{
printf("%s: link-partner does not support auto-negotiation\n",
fp->fxp_name);
goto resspeed;
}
printf("%s: remote cap.: ", fp->fxp_name);
if (mii_ms_ctrl & (MII_MSC_1000T_FD | MII_MSC_1000T_HD))
if (mii_ms_status & (MII_MSS_LP1000T_FD | MII_MSS_LP1000T_HD))
{
printf("1000 Mbps: T-");
switch(mii_ms_status &
(MII_MSS_LP1000T_FD | MII_MSS_LP1000T_HD))
{
case MII_MSS_LP1000T_FD: printf("FD"); break;
case MII_MSS_LP1000T_HD: printf("HD"); break;
default: printf("FD/HD"); break;
}
if (mii_anlpa)
printf(", ");
}
mii_print_techab(mii_anlpa);
printf("\n");
if (ms_regs)
{
printf("%s: ", fp->fxp_name);
if (mii_ms_ctrl & MII_MSC_MS_MANUAL)
{
printf("manual %s",
(mii_ms_ctrl & MII_MSC_MS_VAL) ?
"MASTER" : "SLAVE");
}
else
{
printf("%s device",
(mii_ms_ctrl & MII_MSC_MULTIPORT) ?
"multiport" : "single-port");
}
if (mii_ms_ctrl & MII_MSC_RES)
printf(" reserved<0x%x>", mii_ms_ctrl & MII_MSC_RES);
printf(": ");
if (mii_ms_status & MII_MSS_FAULT)
printf("M/S config fault");
else if (mii_ms_status & MII_MSS_MASTER)
printf("MASTER");
else
printf("SLAVE");
printf("\n");
}
if (mii_ms_status & (MII_MSS_LP1000T_FD|MII_MSS_LP1000T_HD))
{
if (!(mii_ms_status & MII_MSS_LOCREC))
{
printf("%s: local receiver not OK\n",
fp->fxp_name);
}
if (!(mii_ms_status & MII_MSS_REMREC))
{
printf("%s: remote receiver not OK\n",
fp->fxp_name);
}
}
if (mii_ms_status & (MII_MSS_RES|MII_MSS_IDLE_ERR))
{
printf("%s", fp->fxp_name);
if (mii_ms_status & MII_MSS_RES)
printf(" reserved<0x%x>", mii_ms_status & MII_MSS_RES);
if (mii_ms_status & MII_MSS_IDLE_ERR)
{
printf(" idle error %d",
mii_ms_status & MII_MSS_IDLE_ERR);
}
printf("\n");
}
resspeed:
2005-08-04 10:07:29 +02:00
#if VERBOSE
printf("%s: link up, %d Mbps, %s duplex\n",
fp->fxp_name, (scr & MII_SCR_100) ? 100 : 10,
(scr & MII_SCR_FD) ? "full" : "half");
2005-08-04 10:07:29 +02:00
#endif
;
}
/*===========================================================================*
* fxp_stop *
*===========================================================================*/
static void fxp_stop()
{
int i;
port_t port;
fxp_t *fp;
for (i= 0, fp= &fxp_table[0]; i<FXP_PORT_NR; i++, fp++)
{
if (fp->fxp_mode != FM_ENABLED)
continue;
if (!(fp->fxp_flags & FF_ENABLED))
continue;
port= fp->fxp_base_port;
/* Reset device */
if (debug)
printf("%s: resetting device\n", fp->fxp_name);
fxp_outl(port, CSR_PORT, CP_CMD_SOFT_RESET);
}
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
exit(0);
}
/*===========================================================================*
* reply *
*===========================================================================*/
static void reply(fp, err, may_block)
fxp_t *fp;
int err;
int may_block;
{
message reply;
int status;
int r;
status = 0;
if (fp->fxp_flags & FF_PACK_SENT)
status |= DL_PACK_SEND;
if (fp->fxp_flags & FF_PACK_RECV)
status |= DL_PACK_RECV;
reply.m_type = DL_TASK_REPLY;
reply.DL_PORT = fp - fxp_table;
reply.DL_PROC = fp->fxp_client;
reply.DL_STAT = status | ((u32_t) err << 16);
reply.DL_COUNT = fp->fxp_read_s;
#if 0
reply.DL_CLCK = get_uptime();
#else
reply.DL_CLCK = 0;
#endif
r= send(fp->fxp_client, &reply);
if (r == ELOCKED && may_block)
{
2005-08-05 14:55:18 +02:00
#if 0
printW(); printf("send locked\n");
2005-08-05 14:55:18 +02:00
#endif
return;
}
if (r < 0)
panic("FXP","fxp: send failed:", r);
fp->fxp_read_s = 0;
fp->fxp_flags &= ~(FF_PACK_SENT | FF_PACK_RECV);
}
/*===========================================================================*
* mess_reply *
*===========================================================================*/
static void mess_reply(req, reply_mess)
message *req;
message *reply_mess;
{
if (send(req->m_source, reply_mess) != OK)
panic("FXP","fxp: unable to mess_reply", NO_NUM);
}
/*===========================================================================*
* eeprom_read *
*===========================================================================*/
PRIVATE u16_t eeprom_read(fp, reg)
fxp_t *fp;
int reg;
{
port_t port;
u16_t v;
int b, i, alen;
alen= fp->fxp_ee_addrlen;
if (!alen)
{
eeprom_addrsize(fp);
alen= fp->fxp_ee_addrlen;
assert(alen == 6 || alen == 8);
}
port= fp->fxp_base_port;
fxp_outb(port, CSR_EEPROM, CE_EECS); /* Enable EEPROM */
v= EEPROM_READ_PREFIX;
for (i= EEPROM_PREFIX_LEN-1; i >= 0; i--)
{
b= ((v & (1 << i)) ? CE_EEDI : 0);
fxp_outb(port, CSR_EEPROM, CE_EECS | b); /* bit */
fxp_outb(port, CSR_EEPROM, CE_EECS | b | CE_EESK); /* Clock */
micro_delay(EESK_PERIOD/2+1);
fxp_outb(port, CSR_EEPROM, CE_EECS | b);
micro_delay(EESK_PERIOD/2+1);
}
v= reg;
for (i= alen-1; i >= 0; i--)
{
b= ((v & (1 << i)) ? CE_EEDI : 0);
fxp_outb(port, CSR_EEPROM, CE_EECS | b); /* bit */
fxp_outb(port, CSR_EEPROM, CE_EECS | b | CE_EESK); /* Clock */
micro_delay(EESK_PERIOD/2+1);
fxp_outb(port, CSR_EEPROM, CE_EECS | b);
micro_delay(EESK_PERIOD/2+1);
}
v= 0;
for (i= 0; i<16; i++)
{
fxp_outb(port, CSR_EEPROM, CE_EECS | CE_EESK); /* Clock */
micro_delay(EESK_PERIOD/2+1);
b= !!(fxp_inb(port, CSR_EEPROM) & CE_EEDO);
v= (v << 1) | b;
fxp_outb(port, CSR_EEPROM, CE_EECS );
micro_delay(EESK_PERIOD/2+1);
}
fxp_outb(port, CSR_EEPROM, 0); /* Disable EEPROM */
micro_delay(EECS_DELAY);
return v;
}
/*===========================================================================*
* eeprom_addrsize *
*===========================================================================*/
PRIVATE void eeprom_addrsize(fp)
fxp_t *fp;
{
port_t port;
u16_t v;
int b, i;
port= fp->fxp_base_port;
/* Try to find out the size of the EEPROM */
fxp_outb(port, CSR_EEPROM, CE_EECS); /* Enable EEPROM */
v= EEPROM_READ_PREFIX;
for (i= EEPROM_PREFIX_LEN-1; i >= 0; i--)
{
b= ((v & (1 << i)) ? CE_EEDI : 0);
fxp_outb(port, CSR_EEPROM, CE_EECS | b); /* bit */
fxp_outb(port, CSR_EEPROM, CE_EECS | b | CE_EESK); /* Clock */
micro_delay(EESK_PERIOD/2+1);
fxp_outb(port, CSR_EEPROM, CE_EECS | b);
micro_delay(EESK_PERIOD/2+1);
}
for (i= 0; i<32; i++)
{
b= 0;
fxp_outb(port, CSR_EEPROM, CE_EECS | b); /* bit */
fxp_outb(port, CSR_EEPROM, CE_EECS | b | CE_EESK); /* Clock */
micro_delay(EESK_PERIOD/2+1);
fxp_outb(port, CSR_EEPROM, CE_EECS | b);
micro_delay(EESK_PERIOD/2+1);
v= fxp_inb(port, CSR_EEPROM);
if (!(v & CE_EEDO))
break;
}
if (i >= 32)
panic("FXP","eeprom_addrsize: failed", NO_NUM);
fp->fxp_ee_addrlen= i+1;
/* Discard 16 data bits */
for (i= 0; i<16; i++)
{
fxp_outb(port, CSR_EEPROM, CE_EECS | CE_EESK); /* Clock */
micro_delay(EESK_PERIOD/2+1);
fxp_outb(port, CSR_EEPROM, CE_EECS );
micro_delay(EESK_PERIOD/2+1);
}
fxp_outb(port, CSR_EEPROM, 0); /* Disable EEPROM */
micro_delay(EECS_DELAY);
#if VERBOSE
printf("%s EEPROM address length: %d\n",
fp->fxp_name, fp->fxp_ee_addrlen);
#endif
}
/*===========================================================================*
* mii_read *
*===========================================================================*/
PRIVATE u16_t mii_read(fp, reg)
fxp_t *fp;
int reg;
{
clock_t t0,t1;
port_t port;
u32_t v;
port= fp->fxp_base_port;
assert(!fp->fxp_mii_busy);
fp->fxp_mii_busy++;
if (!(fxp_inl(port, CSR_MDI_CTL) & CM_READY))
panic("FXP","mii_read: MDI not ready", NO_NUM);
fxp_outl(port, CSR_MDI_CTL, CM_READ | (1 << CM_PHYADDR_SHIFT) |
(reg << CM_REG_SHIFT));
getuptime(&t0);
do {
v= fxp_inl(port, CSR_MDI_CTL);
if (v & CM_READY)
break;
} while (getuptime(&t1)==OK && (t1-t0) < micros_to_ticks(100000));
if (!(v & CM_READY))
panic("FXP","mii_read: MDI not ready after command", NO_NUM);
fp->fxp_mii_busy--;
assert(!fp->fxp_mii_busy);
return v & CM_DATA_MASK;
}
/*===========================================================================*
* fxp_set_timer *
*===========================================================================*/
PRIVATE void fxp_set_timer(tp, delta, watchdog)
timer_t *tp; /* timer to be set */
clock_t delta; /* in how many ticks */
tmr_func_t watchdog; /* watchdog function to be called */
{
clock_t now; /* current time */
int r;
/* Get the current time. */
r= getuptime(&now);
if (r != OK)
panic("FXP","unable to get uptime from clock", r);
/* Add the timer to the local timer queue. */
tmrs_settimer(&fxp_timers, tp, now + delta, watchdog, NULL);
/* Possibly reschedule an alarm call. This happens when a new timer
* is added in front.
*/
if (fxp_next_timeout == 0 ||
fxp_timers->tmr_exp_time < fxp_next_timeout)
{
fxp_next_timeout= fxp_timers->tmr_exp_time;
#if VERBOSE
printf("fxp_set_timer: calling sys_setalarm for %d (now+%d)\n",
fxp_next_timeout, fxp_next_timeout-now);
#endif
r= sys_setalarm(fxp_next_timeout, 1);
if (r != OK)
panic("FXP","unable to set synchronous alarm", r);
}
}
/*===========================================================================*
* fxp_expire_tmrs *
*===========================================================================*/
PRIVATE void fxp_expire_timers()
{
/* A synchronous alarm message was received. Check if there are any expired
* timers. Possibly reschedule the next alarm.
*/
clock_t now; /* current time */
int r;
/* Get the current time to compare the timers against. */
r= getuptime(&now);
if (r != OK)
panic("FXP","Unable to get uptime from clock.", r);
/* Scan the timers queue for expired timers. Dispatch the watchdog function
* for each expired timers. Possibly a new alarm call must be scheduled.
*/
tmrs_exptimers(&fxp_timers, now, NULL);
if (fxp_timers == NULL)
fxp_next_timeout= TMR_NEVER;
else
{ /* set new alarm */
fxp_next_timeout = fxp_timers->tmr_exp_time;
r= sys_setalarm(fxp_next_timeout, 1);
if (r != OK)
panic("FXP","Unable to set synchronous alarm.", r);
}
}
static u8_t do_inb(port_t port)
{
int r;
u32_t value;
r= sys_inb(port, &value);
if (r != OK)
panic("FXP","sys_inb failed", r);
return value;
}
static u32_t do_inl(port_t port)
{
int r;
u32_t value;
r= sys_inl(port, &value);
if (r != OK)
panic("FXP","sys_inl failed", r);
return value;
}
static void do_outb(port_t port, u8_t value)
{
int r;
r= sys_outb(port, value);
if (r != OK)
panic("FXP","sys_outb failed", r);
}
static void do_outl(port_t port, u32_t value)
{
int r;
r= sys_outl(port, value);
if (r != OK)
panic("FXP","sys_outl failed", r);
}
PRIVATE void tell_dev(buf, size, pci_bus, pci_dev, pci_func)
vir_bytes buf;
size_t size;
int pci_bus;
int pci_dev;
int pci_func;
{
int r;
endpoint_t dev_e;
u32_t u32;
message m;
r= ds_retrieve_label_num("amddev", &u32);
if (r != OK)
{
#if 0
printf(
"fxp`tell_dev: ds_retrieve_label_num failed for 'amddev': %d\n",
r);
#endif
return;
}
dev_e= u32;
m.m_type= IOMMU_MAP;
m.m2_i1= pci_bus;
m.m2_i2= pci_dev;
m.m2_i3= pci_func;
m.m2_l1= buf;
m.m2_l2= size;
r= sendrec(dev_e, &m);
if (r != OK)
{
printf("fxp`tell_dev: sendrec to %d failed: %d\n",
dev_e, r);
return;
}
if (m.m_type != OK)
{
printf("fxp`tell_dev: dma map request failed: %d\n",
m.m_type);
return;
}
}
/*
* $PchId: fxp.c,v 1.4 2005/01/31 22:10:37 philip Exp $
*/