minix/kernel/start.c

181 lines
6.4 KiB
C
Raw Normal View History

2005-04-21 16:53:53 +02:00
/* This file contains the C startup code for Minix on Intel processors.
* It cooperates with mpx.s to set up a good environment for main().
*
* This code runs in real mode for a 16 bit kernel and may have to switch
* to protected mode for a 286.
*
* For a 32 bit kernel this already runs in protected mode, but the selectors
* are still those given by the BIOS with interrupts disabled, so the
* descriptors need to be reloaded and interrupt descriptors made.
*/
#include "kernel.h"
#include "protect.h"
2005-04-29 17:36:43 +02:00
#include "proc.h"
2005-04-21 16:53:53 +02:00
/* Environment strings passed by loader. */
PRIVATE char k_environ[128*sizeof(char *)];
2005-04-29 17:36:43 +02:00
FORWARD _PROTOTYPE( void mem_init, (void) );
2005-04-21 16:53:53 +02:00
/*==========================================================================*
* cstart *
*==========================================================================*/
PUBLIC void cstart(cs, ds, mds, parmoff, parmsize)
U16_t cs, ds; /* kernel code and data segment */
U16_t mds; /* monitor data segment */
U16_t parmoff, parmsize; /* boot parameters offset and length */
{
/* Perform system initializations prior to calling main(). Most settings are
* determined with help of the environment strings passed by MINIX' loader.
*/
register char *envp;
unsigned mon_start;
2005-04-29 17:36:43 +02:00
extern int etext, end;
/* Decide if mode is protected; 386 or higher implies protected mode.
* This must be done first, because it is needed for, e.g., seg2phys().
* For 286 machines we cannot decide on protected mode, yet. This is
* done below.
*/
#if _WORD_SIZE != 2
machine.protected = 1;
#endif
2005-04-21 16:53:53 +02:00
/* Record where the kernel and the monitor are. */
2005-04-29 17:36:43 +02:00
kinfo.code_base = seg2phys(cs);
kinfo.code_size = (phys_bytes) &etext; /* size of code segment */
kinfo.data_base = seg2phys(ds);
kinfo.data_size = (phys_bytes) &end; /* size of data segment */
2005-04-21 16:53:53 +02:00
/* Initialize protected mode descriptors. */
prot_init();
/* Copy the boot parameters to kernel memory. */
2005-04-29 17:36:43 +02:00
kinfo.params_base = seg2phys(mds) + parmoff;
kinfo.params_size = MAX(parmsize,sizeof(k_environ)-2);
phys_copy(kinfo.params_base, vir2phys(k_environ), kinfo.params_size);
2005-04-21 16:53:53 +02:00
2005-04-29 17:36:43 +02:00
/* Record miscellaneous information for user-space servers. */
kinfo.nr_procs = NR_PROCS;
kinfo.nr_tasks = NR_TASKS;
2005-04-29 17:36:43 +02:00
kstrncpy(kinfo.version, OS_RELEASE "." OS_VERSION, 6);
kinfo.proc_addr = (vir_bytes) proc;
kinfo.kmem_base = vir2phys(0);
kinfo.kmem_size = (phys_bytes) &end;
2005-04-21 16:53:53 +02:00
/* Processor? */
2005-04-29 17:36:43 +02:00
machine.processor=katoi(getkenv("processor")); /* 86, 186, 286, 386, ... */
/* Decide if mode is protected for older machines. */
#if _WORD_SIZE == 2
machine.protected = machine.processor >= 286;
#endif
if (! machine.protected) mon_return = 0;
2005-04-21 16:53:53 +02:00
/* XT, AT or MCA bus? */
envp = getkenv("bus");
if (envp == NIL_PTR || kstrcmp(envp, "at") == 0) {
2005-04-29 17:36:43 +02:00
machine.pc_at = TRUE; /* PC-AT compatible hardware */
} else if (kstrcmp(envp, "mca") == 0) {
machine.pc_at = machine.ps_mca = TRUE; /* PS/2 with micro channel */
2005-04-21 16:53:53 +02:00
}
2005-04-29 17:36:43 +02:00
/* Type of VDU: */
envp = getkenv("video"); /* EGA or VGA video unit */
if (kstrcmp(envp, "ega") == 0) machine.vdu_ega = TRUE;
if (kstrcmp(envp, "vga") == 0) machine.vdu_vga = machine.vdu_ega = TRUE;
/* Initialize free memory list from size passed by boot monitor. */
mem_init();
/* Return to assembler code to switch to protected mode (if 286),
* reload selectors and call main().
*/
}
/* In real mode only 1M can be addressed, and in 16-bit protected we can go
* no further than we can count in clicks. (The 286 is further limited by
* its 24 bit address bus, but we can assume in that case that no more than
* 16M memory is reported by the BIOS.)
*/
#define MAX_REAL 0x00100000L
#define MAX_16BIT (0xFFF0L << CLICK_SHIFT)
/*=========================================================================*
* mem_init *
*=========================================================================*/
PRIVATE void mem_init()
{
/* Initialize the free memory list from the 'memory' boot variable. Translate
* the byte offsets and sizes in this list to clicks, properly truncated. Also
* make sure that we don't exceed the maximum address space of the 286 or the
* 8086, i.e. when running in 16-bit protected mode or real mode.
*/
long base, size, limit;
char *s, *end; /* use to parse boot variable */
int i;
struct memory *memp;
2005-04-21 16:53:53 +02:00
#if _WORD_SIZE == 2
2005-04-29 17:36:43 +02:00
unsigned long max_address;
2005-04-21 16:53:53 +02:00
#endif
2005-04-29 17:36:43 +02:00
/* The available memory is determined by MINIX' boot loader as a list of
* (base:size)-pairs in boothead.s. The 'memory' boot variable is set in
* in boot.s. The format is "b0:s0,b1:s1,b2:s2", where b0:s0 is low mem,
* b1:s1 is mem between 1M and 16M, b2:s2 is mem above 16M. Pairs b1:s1
* and b2:s2 are combined if the memory is adjacent.
2005-04-21 16:53:53 +02:00
*/
2005-04-29 17:36:43 +02:00
s = getkenv("memory"); /* get memory boot variable */
for (i = 0; i < NR_MEMS; i++) {
memp = &mem[i]; /* result is stored here */
base = size = 0;
if (*s != 0) { /* end of boot variable */
/* Expect base to be read (end != s) and ':' as next char. */
base = kstrtoul(s, &end, 0x10); /* get number */
if (end != s && *end == ':') s = ++end; /* skip ':' */
else *s=0; /* fake end for next; should not happen */
/* Expect size to be read and skip ',', unless at end. */
size = kstrtoul(s, &end, 0x10); /* get number */
if (end != s && *end == ',') s = ++end; /* skip ',' */
else if (end != s && *end == 0) s = end; /* end found */
else *s=0; /* fake end for next; should not happen */
}
limit = base + size;
#if _WORD_SIZE == 2
max_address = kinfo.protected ? MAX_16BIT : MAX_REAL;
if (limit > max_address) limit = max_address;
#endif
base = (base + CLICK_SIZE-1) & ~(long)(CLICK_SIZE-1);
limit &= ~(long)(CLICK_SIZE-1);
if (limit <= base) continue;
memp->base = base >> CLICK_SHIFT;
memp->size = (limit - base) >> CLICK_SHIFT;
}
2005-04-21 16:53:53 +02:00
}
/*==========================================================================*
* getkenv *
*==========================================================================*/
PUBLIC char *getkenv(name)
_CONST char *name;
{
/* Get environment value - kernel version of getenv to avoid setting up the
* usual environment array.
*/
register _CONST char *namep;
register char *envp;
for (envp = k_environ; *envp != 0;) {
for (namep = name; *namep != 0 && *namep == *envp; namep++, envp++)
;
if (*namep == '\0' && *envp == '=') return(envp + 1);
while (*envp++ != 0)
;
}
return(NIL_PTR);
}