80 lines
2.6 KiB
Text
80 lines
2.6 KiB
Text
|
TDA19988 Driver (HDMI Framer)
|
||
|
|
=============================
|
||
|
|
|
||
|
|
Overview
|
||
|
|
--------
|
||
|
|
|
||
|
|
This is the driver for the HDMI Framer chip commonly found on the BeagleBone
|
||
|
|
Black.
|
||
|
|
|
||
|
|
Interface
|
||
|
|
---------
|
||
|
|
|
||
|
|
To make things easy for the frame buffer driver, a block device driver
|
||
|
|
interface is provided. Read requests cause the TDA19988 driver to read
|
||
|
|
the EDID and return the data.
|
||
|
|
|
||
|
|
Documentation
|
||
|
|
-------------
|
||
|
|
|
||
|
|
The documentation available is rather thin. NXP doesn't provide a
|
||
|
|
datasheet on their website and they did not respond to my request
|
||
|
|
for a datasheet. There are a few other sources of information:
|
||
|
|
|
||
|
|
* TDA9983B.pdf - this chip is similar but not the same. Full
|
||
|
|
register descriptions are provided. This was suggested to me by
|
||
|
|
the author of the Linux driver and someone at BeagleBoard.org as
|
||
|
|
neither of them were able to get a full datasheet for the TDA19988.
|
||
|
|
|
||
|
|
* TDA19988.pdf - you can probably find this on the net. It's a
|
||
|
|
pre-production draft of the datasheet for the TDA19988. It has
|
||
|
|
some information about how things work, but it doesn't give details
|
||
|
|
on the registers.
|
||
|
|
|
||
|
|
* LPC4350_FPU_TFT_HDMI-v2.0/Driver/tda19988.c - there's some
|
||
|
|
example code from NXP for a Hitex LPC4350 REV A5 which includes
|
||
|
|
a BSD licensed driver from NXP. It isn't complete as it only does
|
||
|
|
test mode, put-through mode, and EDID reading. Some of the comments
|
||
|
|
in the code make it seem like it isn't totally working/tested.
|
||
|
|
|
||
|
|
* linux/drivers/gpu/drm/i2c/tda998x_drv.c - there is a Linux driver
|
||
|
|
which implements a lot of functionality. As is always the case,
|
||
|
|
great care has to be taken to only study the code to learn the
|
||
|
|
functionality of the chip and not reproduce/copy the code.
|
||
|
|
|
||
|
|
Limitations
|
||
|
|
-----------
|
||
|
|
|
||
|
|
Currently, only the EDID reading functionality is implemented.
|
||
|
|
|
||
|
|
Testing the Code
|
||
|
|
----------------
|
||
|
|
|
||
|
|
Starting up an instance:
|
||
|
|
|
||
|
|
/bin/service up /usr/sbin/tda19988 -label tda19988.1.3470 \
|
||
|
|
-args 'cec_bus=1 cec_address=0x34 hdmi_bus=1 hdmi_address=0x70'
|
||
|
|
|
||
|
|
Killing an instance:
|
||
|
|
|
||
|
|
/bin/service down tda19988.1.3470
|
||
|
|
|
||
|
|
The driver is meant to be accessed from other drivers using the block
|
||
|
|
device protocol, so it doesn't have a reserved major number and device file.
|
||
|
|
However, if you want a simple test from user space, you can create a temporary
|
||
|
|
device file to read the EDID like this:
|
||
|
|
|
||
|
|
cd /dev
|
||
|
|
mknod tda19988 b 32 0
|
||
|
|
chmod 600 tda19988
|
||
|
|
/bin/service up /usr/sbin/tda19988 -label tda19988.1.3470 \
|
||
|
|
-dev /dev/tda19988 \
|
||
|
|
-args 'cec_bus=1 cec_address=0x34 hdmi_bus=1 hdmi_address=0x70'
|
||
|
|
dd if=/dev/tda19988 of=/root/edid.dat count=1 bs=128
|
||
|
|
/bin/service down tda19988.1.3470
|
||
|
|
hexdump -C /root/edid.dat
|
||
|
|
rm tda19988
|
||
|
|
|
||
|
|
The hexdump should begin with the EDID magic number: 00 ff ff ff ff ff ff 00
|
||
|
|
|