sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
minix/kernel/arch/i386/include/hw_intr.h

55 lines
1.4 KiB
C
Raw Normal View History

Hardware interrupts code path cleanup - the PIC master and slave irq handlers don't pass the irq hook pointer but just the irq number. It gives a little bit more information to the C handler as the irq number is not lost - the irq code path is more achitecture independent. i386 hw interrupts are called irq and whereever the code is arch independent enough hw_intr_ functions are called to mask/unmask interrupts - the legacy PIC is not the only possible interrupt controller in the x86 world, therefore the intr_(un)mask functions were renamed to signal their functionality explicitly. APIC will add their own. - masking and unmasking PIC interrupt lines is removed from assembler and all the functionality is rewriten in C and moved to i8259.c - interrupt handlers have to unmask the interrupt line if all irq handlers are done. Assembler does not do it anymore
2009-11-04 14:24:56 +01:00
#ifndef __HW_INTR_X86_H__
#define __HW_INTR_X86_H__
Convert kernel over to bsdmake
2010-04-02 00:22:33 +02:00
#include "kernel/kernel.h"
retire _PROTOTYPE . only good for obsolete K&R support . also remove a stray ansi.h and the proto cmd
2012-03-24 16:16:34 +01:00
void irq_8259_unmask(int irq);
void irq_8259_mask(int irq);
void irq_8259_eoi(int irq);
void irq_handle(int irq);
void i8259_disable(void);
void eoi_8259_master(void);
void eoi_8259_slave(void);
Hardware interrupts code path cleanup - the PIC master and slave irq handlers don't pass the irq hook pointer but just the irq number. It gives a little bit more information to the C handler as the irq number is not lost - the irq code path is more achitecture independent. i386 hw interrupts are called irq and whereever the code is arch independent enough hw_intr_ functions are called to mask/unmask interrupts - the legacy PIC is not the only possible interrupt controller in the x86 world, therefore the intr_(un)mask functions were renamed to signal their functionality explicitly. APIC will add their own. - masking and unmasking PIC interrupt lines is removed from assembler and all the functionality is rewriten in C and moved to i8259.c - interrupt handlers have to unmask the interrupt line if all irq handlers are done. Assembler does not do it anymore
2009-11-04 14:24:56 +01:00
APIC mode uses IO APICs - kernel turns on IO APICs if no_apic is _not_ set or is equal 0 - pci driver must use the acpi driver to setup IRQ routing otherwise the system cannot work correctly except systems like KVM that use only legacy (E)ISA IRQs 0-15
2010-09-07 09:18:11 +02:00
/*
* we don't use IO APIC if not configured for SMP as we cannot read any info
* about it unless we use MPS which is not present on all single CPU
* configurations. ACPI would be another option, however we don't support it
* either
*/
Add MKAPIC and MKACPI options
2011-07-31 16:20:34 +02:00
#if defined(USE_APIC)
APIC mode uses IO APICs - kernel turns on IO APICs if no_apic is _not_ set or is equal 0 - pci driver must use the acpi driver to setup IRQ routing otherwise the system cannot work correctly except systems like KVM that use only legacy (E)ISA IRQs 0-15
2010-09-07 09:18:11 +02:00
#include "arch/i386/apic.h"
Hardware interrupts code path cleanup - the PIC master and slave irq handlers don't pass the irq hook pointer but just the irq number. It gives a little bit more information to the C handler as the irq number is not lost - the irq code path is more achitecture independent. i386 hw interrupts are called irq and whereever the code is arch independent enough hw_intr_ functions are called to mask/unmask interrupts - the legacy PIC is not the only possible interrupt controller in the x86 world, therefore the intr_(un)mask functions were renamed to signal their functionality explicitly. APIC will add their own. - masking and unmasking PIC interrupt lines is removed from assembler and all the functionality is rewriten in C and moved to i8259.c - interrupt handlers have to unmask the interrupt line if all irq handlers are done. Assembler does not do it anymore
2009-11-04 14:24:56 +01:00
APIC mode uses IO APICs - kernel turns on IO APICs if no_apic is _not_ set or is equal 0 - pci driver must use the acpi driver to setup IRQ routing otherwise the system cannot work correctly except systems like KVM that use only legacy (E)ISA IRQs 0-15
2010-09-07 09:18:11 +02:00
#define hw_intr_mask(irq) ioapic_mask_irq(irq)
#define hw_intr_unmask(irq) ioapic_unmask_irq(irq)
#define hw_intr_ack(irq) ioapic_eoi(irq)
#define hw_intr_used(irq) do { \
if (ioapic_enabled) \
ioapic_set_irq(irq); \
} while (0)
#define hw_intr_not_used(irq) do { \
if (ioapic_enabled) \
ioapic_unset_irq(irq); \
} while (0)
#define hw_intr_disable_all() do { \
ioapic_disable_all(); \
ioapic_reset_pic(); \
lapic_disable(); \
} while (0)
SMP - trully idle APs - any cpu can use smp_schedule() to tell another cpu to reschedule - if an AP is idle, it turns off timer as there is nothing to preempt, no need to wakeup just to go back to sleep again - if a cpu makes a process runnable on an idle cpu, it must wake it up to reschedule
2010-09-15 16:10:57 +02:00
#ifdef CONFIG_SMP
#define ipi_ack apic_eoi
#endif
APIC mode uses IO APICs - kernel turns on IO APICs if no_apic is _not_ set or is equal 0 - pci driver must use the acpi driver to setup IRQ routing otherwise the system cannot work correctly except systems like KVM that use only legacy (E)ISA IRQs 0-15
2010-09-07 09:18:11 +02:00
#else
/* legacy PIC */
Hardware interrupts code path cleanup - the PIC master and slave irq handlers don't pass the irq hook pointer but just the irq number. It gives a little bit more information to the C handler as the irq number is not lost - the irq code path is more achitecture independent. i386 hw interrupts are called irq and whereever the code is arch independent enough hw_intr_ functions are called to mask/unmask interrupts - the legacy PIC is not the only possible interrupt controller in the x86 world, therefore the intr_(un)mask functions were renamed to signal their functionality explicitly. APIC will add their own. - masking and unmasking PIC interrupt lines is removed from assembler and all the functionality is rewriten in C and moved to i8259.c - interrupt handlers have to unmask the interrupt line if all irq handlers are done. Assembler does not do it anymore
2009-11-04 14:24:56 +01:00
#define hw_intr_mask(irq) irq_8259_mask(irq)
#define hw_intr_unmask(irq) irq_8259_unmask(irq)
APIC mode uses IO APICs - kernel turns on IO APICs if no_apic is _not_ set or is equal 0 - pci driver must use the acpi driver to setup IRQ routing otherwise the system cannot work correctly except systems like KVM that use only legacy (E)ISA IRQs 0-15
2010-09-07 09:18:11 +02:00
#define hw_intr_ack(irq) irq_8259_eoi(irq)
#define hw_intr_used(irq)
#define hw_intr_not_used(irq)
#define hw_intr_disable_all()
#endif
Hardware interrupts code path cleanup - the PIC master and slave irq handlers don't pass the irq hook pointer but just the irq number. It gives a little bit more information to the C handler as the irq number is not lost - the irq code path is more achitecture independent. i386 hw interrupts are called irq and whereever the code is arch independent enough hw_intr_ functions are called to mask/unmask interrupts - the legacy PIC is not the only possible interrupt controller in the x86 world, therefore the intr_(un)mask functions were renamed to signal their functionality explicitly. APIC will add their own. - masking and unmasking PIC interrupt lines is removed from assembler and all the functionality is rewriten in C and moved to i8259.c - interrupt handlers have to unmask the interrupt line if all irq handlers are done. Assembler does not do it anymore
2009-11-04 14:24:56 +01:00
#endif /* __HW_INTR_X86_H__ */
Reference in a new issue Copy permalink