2005-04-21 16:53:53 +02:00
|
|
|
/* The following names are synonyms for the variables in the input message. */
|
|
|
|
|
#define addr m1_i3
|
|
|
|
|
#define buffer m1_p1
|
endpoint-aware conversion of servers.
'who', indicating caller number in pm and fs and some other servers, has
been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.).
In both PM and FS, isokendpt() convert endpoints to process slot
numbers, returning OK if it was a valid and consistent endpoint number.
okendpt() does the same but panic()s if it doesn't succeed. (In PM,
this is pm_isok..)
pm and fs keep their own records of process endpoints in their proc tables,
which are needed to make kernel calls about those processes.
message field names have changed.
fs drivers are endpoints.
fs now doesn't try to get out of driver deadlock, as the protocol isn't
supposed to let that happen any more. (A warning is printed if ELOCKED
is detected though.)
fproc[].fp_task (indicating which driver the process is suspended on)
became an int.
PM and FS now get endpoint numbers of initial boot processes from the
kernel. These happen to be the same as the old proc numbers, to let
user processes reach them with the old numbers, but FS and PM don't know
that. All new processes after INIT, even after the generation number
wraps around, get endpoint numbers with generation 1 and higher, so
the first instances of the boot processes are the only processes ever
to have endpoint numbers in the old proc number range.
More return code checks of sys_* functions have been added.
IS has become endpoint-aware. Ditched the 'text' and 'data' fields
in the kernel dump (which show locations, not sizes, so aren't terribly
useful) in favour of the endpoint number. Proc number is still visible.
Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got
the formatting changed.
PM reading segments using rw_seg() has changed - it uses other fields
in the message now instead of encoding the segment and process number and
fd in the fd field. For that it uses _read_pm() and _write_pm() which to
_taskcall()s directly in pm/misc.c.
PM now sys_exit()s itself on panic(), instead of sys_abort().
RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
|
|
|
#define child_endpt m1_i2
|
2005-04-21 16:53:53 +02:00
|
|
|
#define co_mode m1_i1
|
|
|
|
|
#define fd m1_i1
|
|
|
|
|
#define fd2 m1_i2
|
|
|
|
|
#define group m1_i3
|
|
|
|
|
#define ls_fd m2_i1
|
|
|
|
|
#define mk_mode m1_i2
|
|
|
|
|
#define mk_z0 m1_i3
|
|
|
|
|
#define mode m3_i2
|
|
|
|
|
#define c_mode m1_i3
|
|
|
|
|
#define c_name m1_p1
|
|
|
|
|
#define name m3_p1
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
#define flength m2_l1
|
2005-04-21 16:53:53 +02:00
|
|
|
#define name1 m1_p1
|
|
|
|
|
#define name2 m1_p2
|
|
|
|
|
#define name_length m3_i1
|
|
|
|
|
#define name1_length m1_i1
|
|
|
|
|
#define name2_length m1_i2
|
|
|
|
|
#define nbytes m1_i2
|
|
|
|
|
#define owner m1_i2
|
|
|
|
|
#define pathname m3_ca1
|
|
|
|
|
#define pid m1_i3
|
endpoint-aware conversion of servers.
'who', indicating caller number in pm and fs and some other servers, has
been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.).
In both PM and FS, isokendpt() convert endpoints to process slot
numbers, returning OK if it was a valid and consistent endpoint number.
okendpt() does the same but panic()s if it doesn't succeed. (In PM,
this is pm_isok..)
pm and fs keep their own records of process endpoints in their proc tables,
which are needed to make kernel calls about those processes.
message field names have changed.
fs drivers are endpoints.
fs now doesn't try to get out of driver deadlock, as the protocol isn't
supposed to let that happen any more. (A warning is printed if ELOCKED
is detected though.)
fproc[].fp_task (indicating which driver the process is suspended on)
became an int.
PM and FS now get endpoint numbers of initial boot processes from the
kernel. These happen to be the same as the old proc numbers, to let
user processes reach them with the old numbers, but FS and PM don't know
that. All new processes after INIT, even after the generation number
wraps around, get endpoint numbers with generation 1 and higher, so
the first instances of the boot processes are the only processes ever
to have endpoint numbers in the old proc number range.
More return code checks of sys_* functions have been added.
IS has become endpoint-aware. Ditched the 'text' and 'data' fields
in the kernel dump (which show locations, not sizes, so aren't terribly
useful) in favour of the endpoint number. Proc number is still visible.
Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got
the formatting changed.
PM reading segments using rw_seg() has changed - it uses other fields
in the message now instead of encoding the segment and process number and
fd in the fd field. For that it uses _read_pm() and _write_pm() which to
_taskcall()s directly in pm/misc.c.
PM now sys_exit()s itself on panic(), instead of sys_abort().
RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
|
|
|
#define ENDPT m1_i1
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
#define offset_lo m2_l1
|
|
|
|
|
#define offset_high m2_l2
|
2005-08-02 17:29:17 +02:00
|
|
|
#define ctl_req m4_l1
|
|
|
|
|
#define driver_nr m4_l2
|
|
|
|
|
#define dev_nr m4_l3
|
|
|
|
|
#define dev_style m4_l4
|
2006-05-11 16:57:23 +02:00
|
|
|
#define m_force m4_l5
|
2005-04-21 16:53:53 +02:00
|
|
|
#define rd_only m1_i3
|
|
|
|
|
#define request m1_i2
|
|
|
|
|
#define sig m1_i2
|
endpoint-aware conversion of servers.
'who', indicating caller number in pm and fs and some other servers, has
been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.).
In both PM and FS, isokendpt() convert endpoints to process slot
numbers, returning OK if it was a valid and consistent endpoint number.
okendpt() does the same but panic()s if it doesn't succeed. (In PM,
this is pm_isok..)
pm and fs keep their own records of process endpoints in their proc tables,
which are needed to make kernel calls about those processes.
message field names have changed.
fs drivers are endpoints.
fs now doesn't try to get out of driver deadlock, as the protocol isn't
supposed to let that happen any more. (A warning is printed if ELOCKED
is detected though.)
fproc[].fp_task (indicating which driver the process is suspended on)
became an int.
PM and FS now get endpoint numbers of initial boot processes from the
kernel. These happen to be the same as the old proc numbers, to let
user processes reach them with the old numbers, but FS and PM don't know
that. All new processes after INIT, even after the generation number
wraps around, get endpoint numbers with generation 1 and higher, so
the first instances of the boot processes are the only processes ever
to have endpoint numbers in the old proc number range.
More return code checks of sys_* functions have been added.
IS has become endpoint-aware. Ditched the 'text' and 'data' fields
in the kernel dump (which show locations, not sizes, so aren't terribly
useful) in favour of the endpoint number. Proc number is still visible.
Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got
the formatting changed.
PM reading segments using rw_seg() has changed - it uses other fields
in the message now instead of encoding the segment and process number and
fd in the fd field. For that it uses _read_pm() and _write_pm() which to
_taskcall()s directly in pm/misc.c.
PM now sys_exit()s itself on panic(), instead of sys_abort().
RS also talks in endpoints instead of process numbers.
2006-03-03 11:20:58 +01:00
|
|
|
#define endpt1 m1_i1
|
- Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 21:27:14 +01:00
|
|
|
#define fs_endpt m1_p3
|
2005-04-21 16:53:53 +02:00
|
|
|
#define tp m2_l1
|
|
|
|
|
#define utime_actime m2_l1
|
|
|
|
|
#define utime_modtime m2_l2
|
|
|
|
|
#define utime_file m2_p1
|
|
|
|
|
#define utime_length m2_i1
|
|
|
|
|
#define utime_strlen m2_i2
|
|
|
|
|
#define whence m2_i2
|
|
|
|
|
#define svrctl_req m2_i1
|
|
|
|
|
#define svrctl_argp m2_p1
|
2005-06-06 15:51:50 +02:00
|
|
|
#define info_what m1_i1
|
|
|
|
|
#define info_where m1_p1
|
2007-08-07 14:52:47 +02:00
|
|
|
#define md_label m2_p1
|
|
|
|
|
#define md_label_len m2_l1
|
|
|
|
|
#define md_major m2_i1
|
|
|
|
|
#define md_style m2_i2
|
|
|
|
|
#define md_force m2_i3
|
2005-04-21 16:53:53 +02:00
|
|
|
|
|
|
|
|
/* The following names are synonyms for the variables in the output message. */
|
|
|
|
|
#define reply_type m_type
|
|
|
|
|
#define reply_l1 m2_l1
|
2006-12-06 16:21:27 +01:00
|
|
|
#define reply_l2 m2_l2
|
2005-04-21 16:53:53 +02:00
|
|
|
#define reply_i1 m1_i1
|
|
|
|
|
#define reply_i2 m1_i2
|
