minix/drivers/dp8390/dp8390.h

315 lines
12 KiB
C
Raw Normal View History

/*
dp8390.h
Created: before Dec 28, 1992 by Philip Homburg
*/
/* National Semiconductor DP8390 Network Interface Controller. */
/* Page 0, for reading ------------- */
#define DP_CR 0x0 /* Read side of Command Register */
#define DP_CLDA0 0x1 /* Current Local Dma Address 0 */
#define DP_CLDA1 0x2 /* Current Local Dma Address 1 */
#define DP_BNRY 0x3 /* Boundary Pointer */
#define DP_TSR 0x4 /* Transmit Status Register */
#define DP_NCR 0x5 /* Number of Collisions Register */
#define DP_FIFO 0x6 /* Fifo ?? */
#define DP_ISR 0x7 /* Interrupt Status Register */
#define DP_CRDA0 0x8 /* Current Remote Dma Address 0 */
#define DP_CRDA1 0x9 /* Current Remote Dma Address 1 */
#define DP_DUM1 0xA /* unused */
#define DP_DUM2 0xB /* unused */
#define DP_RSR 0xC /* Receive Status Register */
#define DP_CNTR0 0xD /* Tally Counter 0 */
#define DP_CNTR1 0xE /* Tally Counter 1 */
#define DP_CNTR2 0xF /* Tally Counter 2 */
/* Page 0, for writing ------------- */
#define DP_CR 0x0 /* Write side of Command Register */
#define DP_PSTART 0x1 /* Page Start Register */
#define DP_PSTOP 0x2 /* Page Stop Register */
#define DP_BNRY 0x3 /* Boundary Pointer */
#define DP_TPSR 0x4 /* Transmit Page Start Register */
#define DP_TBCR0 0x5 /* Transmit Byte Count Register 0 */
#define DP_TBCR1 0x6 /* Transmit Byte Count Register 1 */
#define DP_ISR 0x7 /* Interrupt Status Register */
#define DP_RSAR0 0x8 /* Remote Start Address Register 0 */
#define DP_RSAR1 0x9 /* Remote Start Address Register 1 */
#define DP_RBCR0 0xA /* Remote Byte Count Register 0 */
#define DP_RBCR1 0xB /* Remote Byte Count Register 1 */
#define DP_RCR 0xC /* Receive Configuration Register */
#define DP_TCR 0xD /* Transmit Configuration Register */
#define DP_DCR 0xE /* Data Configuration Register */
#define DP_IMR 0xF /* Interrupt Mask Register */
/* Page 1, read/write -------------- */
#define DP_CR 0x0 /* Command Register */
#define DP_PAR0 0x1 /* Physical Address Register 0 */
#define DP_PAR1 0x2 /* Physical Address Register 1 */
#define DP_PAR2 0x3 /* Physical Address Register 2 */
#define DP_PAR3 0x4 /* Physical Address Register 3 */
#define DP_PAR4 0x5 /* Physical Address Register 4 */
#define DP_PAR5 0x6 /* Physical Address Register 5 */
#define DP_CURR 0x7 /* Current Page Register */
#define DP_MAR0 0x8 /* Multicast Address Register 0 */
#define DP_MAR1 0x9 /* Multicast Address Register 1 */
#define DP_MAR2 0xA /* Multicast Address Register 2 */
#define DP_MAR3 0xB /* Multicast Address Register 3 */
#define DP_MAR4 0xC /* Multicast Address Register 4 */
#define DP_MAR5 0xD /* Multicast Address Register 5 */
#define DP_MAR6 0xE /* Multicast Address Register 6 */
#define DP_MAR7 0xF /* Multicast Address Register 7 */
/* Bits in dp_cr */
#define CR_STP 0x01 /* Stop: software reset */
#define CR_STA 0x02 /* Start: activate NIC */
#define CR_TXP 0x04 /* Transmit Packet */
#define CR_DMA 0x38 /* Mask for DMA control */
#define CR_DM_NOP 0x00 /* DMA: No Operation */
#define CR_DM_RR 0x08 /* DMA: Remote Read */
#define CR_DM_RW 0x10 /* DMA: Remote Write */
#define CR_DM_SP 0x18 /* DMA: Send Packet */
#define CR_DM_ABORT 0x20 /* DMA: Abort Remote DMA Operation */
#define CR_PS 0xC0 /* Mask for Page Select */
#define CR_PS_P0 0x00 /* Register Page 0 */
#define CR_PS_P1 0x40 /* Register Page 1 */
#define CR_PS_P2 0x80 /* Register Page 2 */
#define CR_PS_T1 0xC0 /* Test Mode Register Map */
/* Bits in dp_isr */
#define ISR_PRX 0x01 /* Packet Received with no errors */
#define ISR_PTX 0x02 /* Packet Transmitted with no errors */
#define ISR_RXE 0x04 /* Receive Error */
#define ISR_TXE 0x08 /* Transmit Error */
#define ISR_OVW 0x10 /* Overwrite Warning */
#define ISR_CNT 0x20 /* Counter Overflow */
#define ISR_RDC 0x40 /* Remote DMA Complete */
#define ISR_RST 0x80 /* Reset Status */
/* Bits in dp_imr */
#define IMR_PRXE 0x01 /* Packet Received iEnable */
#define IMR_PTXE 0x02 /* Packet Transmitted iEnable */
#define IMR_RXEE 0x04 /* Receive Error iEnable */
#define IMR_TXEE 0x08 /* Transmit Error iEnable */
#define IMR_OVWE 0x10 /* Overwrite Warning iEnable */
#define IMR_CNTE 0x20 /* Counter Overflow iEnable */
#define IMR_RDCE 0x40 /* DMA Complete iEnable */
/* Bits in dp_dcr */
#define DCR_WTS 0x01 /* Word Transfer Select */
#define DCR_BYTEWIDE 0x00 /* WTS: byte wide transfers */
#define DCR_WORDWIDE 0x01 /* WTS: word wide transfers */
#define DCR_BOS 0x02 /* Byte Order Select */
#define DCR_LTLENDIAN 0x00 /* BOS: Little Endian */
#define DCR_BIGENDIAN 0x02 /* BOS: Big Endian */
#define DCR_LAS 0x04 /* Long Address Select */
#define DCR_BMS 0x08 /* Burst Mode Select
* Called Loopback Select (LS) in
* later manuals. Should be set. */
#define DCR_AR 0x10 /* Autoinitialize Remote */
#define DCR_FTS 0x60 /* Fifo Threshold Select */
#define DCR_2BYTES 0x00 /* 2 bytes */
#define DCR_4BYTES 0x40 /* 4 bytes */
#define DCR_8BYTES 0x20 /* 8 bytes */
#define DCR_12BYTES 0x60 /* 12 bytes */
/* Bits in dp_tcr */
#define TCR_CRC 0x01 /* Inhibit CRC */
#define TCR_ELC 0x06 /* Encoded Loopback Control */
#define TCR_NORMAL 0x00 /* ELC: Normal Operation */
#define TCR_INTERNAL 0x02 /* ELC: Internal Loopback */
#define TCR_0EXTERNAL 0x04 /* ELC: External Loopback LPBK=0 */
#define TCR_1EXTERNAL 0x06 /* ELC: External Loopback LPBK=1 */
#define TCR_ATD 0x08 /* Auto Transmit Disable */
#define TCR_OFST 0x10 /* Collision Offset Enable (be nice) */
/* Bits in dp_tsr */
#define TSR_PTX 0x01 /* Packet Transmitted (without error)*/
#define TSR_DFR 0x02 /* Transmit Deferred, reserved in
* later manuals. */
#define TSR_COL 0x04 /* Transmit Collided */
#define TSR_ABT 0x08 /* Transmit Aborted */
#define TSR_CRS 0x10 /* Carrier Sense Lost */
#define TSR_FU 0x20 /* FIFO Underrun */
#define TSR_CDH 0x40 /* CD Heartbeat */
#define TSR_OWC 0x80 /* Out of Window Collision */
/* Bits in tp_rcr */
#define RCR_SEP 0x01 /* Save Errored Packets */
#define RCR_AR 0x02 /* Accept Runt Packets */
#define RCR_AB 0x04 /* Accept Broadcast */
#define RCR_AM 0x08 /* Accept Multicast */
#define RCR_PRO 0x10 /* Physical Promiscuous */
#define RCR_MON 0x20 /* Monitor Mode */
/* Bits in dp_rsr */
#define RSR_PRX 0x01 /* Packet Received Intact */
#define RSR_CRC 0x02 /* CRC Error */
#define RSR_FAE 0x04 /* Frame Alignment Error */
#define RSR_FO 0x08 /* FIFO Overrun */
#define RSR_MPA 0x10 /* Missed Packet */
#define RSR_PHY 0x20 /* Multicast Address Match */
#define RSR_DIS 0x40 /* Receiver Disabled */
#define RSR_DFR 0x80 /* In later manuals: Deferring */
typedef struct dp_rcvhdr
{
u8_t dr_status; /* Copy of rsr */
u8_t dr_next; /* Pointer to next packet */
u8_t dr_rbcl; /* Receive Byte Count Low */
u8_t dr_rbch; /* Receive Byte Count High */
} dp_rcvhdr_t;
#define DP_PAGESIZE 256
/* Some macros to simplify accessing the dp8390 */
#define inb_reg0(dep, reg) (inb(dep->de_dp8390_port+reg))
#define outb_reg0(dep, reg, data) (outb(dep->de_dp8390_port+reg, data))
#define inb_reg1(dep, reg) (inb(dep->de_dp8390_port+reg))
#define outb_reg1(dep, reg, data) (outb(dep->de_dp8390_port+reg, data))
/* Software interface to the dp8390 driver */
struct dpeth;
struct iovec_dat;
2006-07-10 14:43:38 +02:00
struct iovec_dat_s;
_PROTOTYPE( typedef void (*dp_initf_t), (struct dpeth *dep) );
_PROTOTYPE( typedef void (*dp_stopf_t), (struct dpeth *dep) );
_PROTOTYPE( typedef void (*dp_user2nicf_t), (struct dpeth *dep,
struct iovec_dat *iovp, vir_bytes offset,
int nic_addr, vir_bytes count) );
2006-07-10 14:43:38 +02:00
_PROTOTYPE( typedef void (*dp_user2nicf_s_t), (struct dpeth *dep,
struct iovec_dat_s *iovp, vir_bytes offset,
int nic_addr, vir_bytes count) );
_PROTOTYPE( typedef void (*dp_nic2userf_t), (struct dpeth *dep,
int nic_addr, struct iovec_dat *iovp,
vir_bytes offset, vir_bytes count) );
2006-07-10 14:43:38 +02:00
_PROTOTYPE( typedef void (*dp_nic2userf_s_t), (struct dpeth *dep,
int nic_addr, struct iovec_dat_s *iovp,
vir_bytes offset, vir_bytes count) );
#if 0
_PROTOTYPE( typedef void (*dp_getheaderf_t), (struct dpeth *dep,
int page, struct dp_rcvhdr *h, u16_t *eth_type) );
#endif
_PROTOTYPE( typedef void (*dp_getblock_t), (struct dpeth *dep,
int page, size_t offset, size_t size, void *dst) );
/* iovectors are handled IOVEC_NR entries at a time. */
#define IOVEC_NR 16
typedef int irq_hook_t;
typedef struct iovec_dat
{
iovec_t iod_iovec[IOVEC_NR];
int iod_iovec_s;
int iod_proc_nr;
vir_bytes iod_iovec_addr;
} iovec_dat_t;
2006-07-10 14:43:38 +02:00
typedef struct iovec_dat_s
{
iovec_s_t iod_iovec[IOVEC_NR];
int iod_iovec_s;
int iod_proc_nr;
cp_grant_id_t iod_grant;
vir_bytes iod_iovec_offset;
} iovec_dat_s_t;
#define SENDQ_NR 2 /* Maximum size of the send queue */
#define SENDQ_PAGES 6 /* 6 * DP_PAGESIZE >= 1514 bytes */
typedef struct dpeth
{
/* The de_base_port field is the starting point of the probe.
* The conf routine also fills de_linmem and de_irq. If the probe
* routine knows the irq and/or memory address because they are
* hardwired in the board, the probe should modify these fields.
* Futhermore, the probe routine should also fill in de_initf and
* de_stopf fields with the appropriate function pointers and set
* de_prog_IO iff programmed I/O is to be used.
*/
port_t de_base_port;
phys_bytes de_linmem;
2006-07-10 14:43:38 +02:00
char *de_locmem;
int de_irq;
int de_int_pending;
irq_hook_t de_hook;
dp_initf_t de_initf;
dp_stopf_t de_stopf;
int de_prog_IO;
char de_name[sizeof("dp8390#n")];
/* The initf function fills the following fields. Only cards that do
* programmed I/O fill in the de_pata_port field.
* In addition, the init routine has to fill in the sendq data
* structures.
*/
ether_addr_t de_address;
port_t de_dp8390_port;
port_t de_data_port;
int de_16bit;
int de_ramsize;
int de_offset_page;
int de_startpage;
int de_stoppage;
#if ENABLE_PCI
/* PCI config */
char de_pci; /* TRUE iff PCI device */
u8_t de_pcibus;
u8_t de_pcidev;
u8_t de_pcifunc;
#endif
/* Do it yourself send queue */
struct sendq
{
int sq_filled; /* this buffer contains a packet */
int sq_size; /* with this size */
int sq_sendpage; /* starting page of the buffer */
} de_sendq[SENDQ_NR];
int de_sendq_nr;
int de_sendq_head; /* Enqueue at the head */
int de_sendq_tail; /* Dequeue at the tail */
/* Fields for internal use by the dp8390 driver. */
int de_flags;
int de_mode;
eth_stat_t de_stat;
2006-07-10 14:43:38 +02:00
iovec_dat_s_t de_read_iovec_s;
iovec_dat_s_t de_write_iovec_s;
iovec_dat_s_t de_tmp_iovec_s;
vir_bytes de_read_s;
endpoint_t de_client;
message de_sendmsg;
2006-07-10 14:43:38 +02:00
dp_user2nicf_s_t de_user2nicf_s;
dp_nic2userf_s_t de_nic2userf_s;
dp_getblock_t de_getblockf;
} dpeth_t;
#define DEI_DEFAULT 0x8000
#define DEF_EMPTY 0x000
#define DEF_PACK_SEND 0x001
#define DEF_PACK_RECV 0x002
#define DEF_SEND_AVAIL 0x004
#define DEF_READING 0x010
#define DEF_PROMISC 0x040
#define DEF_MULTI 0x080
#define DEF_BROAD 0x100
#define DEF_ENABLED 0x200
#define DEF_STOPPED 0x400
#define DEM_DISABLED 0x0
#define DEM_SINK 0x1
#define DEM_ENABLED 0x2
#if !__minix_vmd
#define debug 0 /* Standard Minix lacks debug variable */
#endif
/*
* $PchId: dp8390.h,v 1.10 2005/02/10 17:26:06 philip Exp $
*/