83 lines
2.2 KiB
Groff
83 lines
2.2 KiB
Groff
|
.TH SLIP 8
|
||
|
|
.SH NAME
|
||
|
|
slip \- Serial Line IP
|
||
|
|
.SH SYNOPSIS
|
||
|
|
.B slip
|
||
|
|
.I pseudo-ip-device
|
||
|
|
.SH DESCRIPTION
|
||
|
|
.de SP
|
||
|
|
.if t .sp 0.4
|
||
|
|
.if n .sp
|
||
|
|
..
|
||
|
|
The
|
||
|
|
.B slip
|
||
|
|
program implements an Internet network connection over a bidirectional 8-bit
|
||
|
|
transport, usually a serial line. The protocol used for this connection is
|
||
|
|
the Serial Line Internet Protocol, SLIP for short.
|
||
|
|
.PP
|
||
|
|
The
|
||
|
|
.I pseudo-ip-device
|
||
|
|
argument names one of the
|
||
|
|
.B /dev/psip*
|
||
|
|
devices that is offered by the Minix TCP/IP driver
|
||
|
|
.BR inet (8).
|
||
|
|
The
|
||
|
|
.B slip
|
||
|
|
program reads IP packets from standard input and writes them to the pseudo
|
||
|
|
IP device, and reads packets from the pseudo IP device and writes them to
|
||
|
|
standard output. A typical use is like this:
|
||
|
|
.PP
|
||
|
|
.RS
|
||
|
|
.nf
|
||
|
|
.ft B
|
||
|
|
{
|
||
|
|
stty raw 115200
|
||
|
|
slip /dev/psip2 &
|
||
|
|
} </dev/tty01 >/dev/tty01
|
||
|
|
.ft P
|
||
|
|
.fi
|
||
|
|
.RE
|
||
|
|
.PP
|
||
|
|
The SLIP protocol is just a very simple packet framing protocol. It defines
|
||
|
|
two characters as markers on a byte stream to frame packets. SLIP does
|
||
|
|
not implement any higher level addressing, error detection, or compression.
|
||
|
|
Thanks to its simplicity it can be used under Minix, any other system would
|
||
|
|
prefer to use the Point-to-Point protocol: PPP.
|
||
|
|
.PP
|
||
|
|
The SLIP packet framing protocol as defined in RFC-1055 is as follows:
|
||
|
|
.IP "\-"
|
||
|
|
Packets are delimited by an END character, octal 300. END is often send at
|
||
|
|
the start of a packet too to reset the logic of the receiver, so that random
|
||
|
|
noise isn't added to the beginning of a packet.
|
||
|
|
.IP "\-"
|
||
|
|
An ESC character (octal 333) is used to escape any END or ESC characters
|
||
|
|
that may occur in an IP packet. END and ESC are changed to ESC 334 and ESC
|
||
|
|
335 in the data stream. (Note that END doesn't occur within the data stream
|
||
|
|
at all by escaping it this way, making finding the framing END easier.)
|
||
|
|
.ig
|
||
|
|
.PP
|
||
|
|
The manual page
|
||
|
|
.BR serial-ip (8)
|
||
|
|
describes how to configure the Minix network devices to be used with a
|
||
|
|
serial IP connection.
|
||
|
|
..
|
||
|
|
.SH FILES
|
||
|
|
.TP \w'/dev/psip*'u+5n
|
||
|
|
.B /dev/psip*
|
||
|
|
Pseudo-IP devices for use by
|
||
|
|
.BR slip .
|
||
|
|
.SH "SEE ALSO"
|
||
|
|
.ig
|
||
|
|
.BR ppp (8).
|
||
|
|
.br
|
||
|
|
..
|
||
|
|
.BR RFC-1055 .
|
||
|
|
.SH NOTES
|
||
|
|
Under Minix
|
||
|
|
.B slip
|
||
|
|
forks in two to handle the two data streams in or out of the serial line.
|
||
|
|
Under Minix-vmd it uses asynchronous I/O to handle the two streams within
|
||
|
|
one program.
|
||
|
|
.SH AUTHOR
|
||
|
|
Kees J. Bot <kjb@cs.vu.nl>
|