sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
minix/lib/libchardriver/chardriver.c

472 lines
15 KiB
C
Raw Normal View History

Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
/* This file contains the device independent character driver interface.
Initial revision
2005-04-21 16:53:53 +02:00
*
* The drivers support the following operations (using message format m2):
*
Server/driver protocols: no longer allow third-party copies. Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed to know which actual process to copy data from/to, as that process may not always be the caller. Now that we have full safecopy support, these fields have become useless for that purpose: the owner of the grant is *always* the caller. Allowing the caller to supply another endpoint is in fact dangerous, because the callee may then end up using a grant from a third party. One could call this a variant of the confused deputy problem. From now on, safecopy calls should always use the caller's endpoint as grant owner. This fully obsoletes the DL_ENDPT field in the inet/ethernet protocol. IO_ENDPT has other uses besides identifying the grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only because that is a more fitting name (it should never be used for I/O after all), but also in order to intentionally break any old system source code outside the base system. If this patch breaks your code, fixing it is fairly simple: - DL_ENDPT should be replaced with m_source; - IO_ENDPT should be replaced with m_source when used for safecopies; - IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g. when setting REP_ENDPT, matching requests in CANCEL calls, getting DEV_SELECT flags, and retrieving of the real user process's endpoint in DEV_OPEN. The changes in this patch are binary backward compatible.
2011-04-11 19:35:05 +02:00
* m_type DEVICE USER_ENDPT COUNT POSITION HIGHPOS IO_GRANT
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
* ----------------------------------------------------------------------------
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
* | DEV_OPEN | device | proc nr | mode | | | |
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
* |---------------+--------+---------+---------+--------+--------+-----------|
* | DEV_CLOSE | device | proc nr | | | | |
* |---------------+--------+---------+---------+--------+--------+-----------|
* | DEV_READ_S | device | proc nr | bytes | off lo | off hi i buf grant |
* |---------------+--------+---------+---------+--------+--------+-----------|
* | DEV_WRITE_S | device | proc nr | bytes | off lo | off hi | buf grant |
* |---------------+--------+---------+---------+--------+--------+-----------|
* | DEV_GATHER_S | device | proc nr | iov len | off lo | off hi | iov grant |
* |---------------+--------+---------+---------+--------+--------+-----------|
* | DEV_SCATTER_S | device | proc nr | iov len | off lo | off hi | iov grant |
* |---------------+--------+---------+---------+--------+--------+-----------|
* | DEV_IOCTL_S | device | proc nr | request | | | buf grant |
* |---------------+--------+---------+---------+--------+--------+-----------|
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
* | CANCEL | device | proc nr | r/w | | | grant |
* |---------------+--------+---------+---------+--------+--------+-----------|
* | DEV_SELECT | device | ops | | | | |
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
* ----------------------------------------------------------------------------
Initial revision
2005-04-21 16:53:53 +02:00
*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* The entry points into this file are:
* driver_task: the main message loop of the driver
* driver_receive: message receive interface for drivers
*
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
* Changes:
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* Oct 16, 2011 split character and block protocol (D.C. van Moolenbroek)
* Aug 27, 2011 move common functions into driver.c (A. Welzel)
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
* Jul 25, 2005 added SYS_SIG type for signals (Jorrit N. Herder)
* Sep 15, 2004 added SYN_ALARM type for timeouts (Jorrit N. Herder)
* Jul 23, 2004 removed kernel dependencies (Jorrit N. Herder)
* Apr 02, 1992 constructed from AT wini and floppy driver (Kees J. Bot)
Initial revision
2005-04-21 16:53:53 +02:00
*/
Convert drivers/ and servers/ over to bsdmake -Move libdriver to lib/ -Install all boot image services on filesystem to aid restartability
2010-03-22 22:25:22 +01:00
#include <minix/drivers.h>
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
#include <minix/chardriver.h>
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
#include <minix/ds.h>
Initial revision
2005-04-21 16:53:53 +02:00
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static int running;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/* Management data for opened devices. */
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static int open_devs[MAX_NR_OPEN_DEVICES];
static int next_open_devs_slot = 0;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
/*===========================================================================*
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
* clear_open_devs *
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static void clear_open_devs(void)
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
{
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/* Reset the set of previously opened minor devices. */
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
next_open_devs_slot = 0;
}
/*===========================================================================*
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
* is_open_dev *
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static int is_open_dev(int device)
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
{
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/* Check whether the given minor device has previously been opened. */
int i;
for (i = 0; i < next_open_devs_slot; i++)
if (open_devs[i] == device)
return TRUE;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
return FALSE;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
}
/*===========================================================================*
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
* set_open_dev *
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static void set_open_dev(int device)
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
{
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/* Mark the given minor device as having been opened. */
if (next_open_devs_slot >= MAX_NR_OPEN_DEVICES)
panic("out of slots for open devices");
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
open_devs[next_open_devs_slot] = device;
next_open_devs_slot++;
}
Initial revision
2005-04-21 16:53:53 +02:00
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* chardriver_announce *
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
void chardriver_announce(void)
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
{
/* Announce we are up after a fresh start or restart. */
int r;
char key[DS_MAX_KEYLEN];
char label[DS_MAX_KEYLEN];
char *driver_prefix = "drv.chr.";
/* Callers are allowed to use sendrec to communicate with drivers.
* For this reason, there may blocked callers when a driver restarts.
* Ask the kernel to unblock them (if any).
*/
#if USE_STATECTL
if ((r = sys_statectl(SYS_STATE_CLEAR_IPC_REFS)) != OK)
panic("chardriver_init: sys_statectl failed: %d", r);
#endif
/* Publish a driver up event. */
if ((r = ds_retrieve_label_name(label, getprocnr())) != OK)
panic("chardriver_init: unable to get own label: %d", r);
snprintf(key, DS_MAX_KEYLEN, "%s%s", driver_prefix, label);
if ((r = ds_publish_u32(key, DS_DRIVER_UP, DSF_OVERWRITE)) != OK)
panic("chardriver_init: unable to publish driver up event: %d", r);
/* Expect a DEV_OPEN for any device before serving regular driver requests. */
clear_open_devs();
}
/*===========================================================================*
* async_reply *
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static void async_reply(message *mess, int r)
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
{
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/* Send a reply using the asynchronous character device protocol. */
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
message reply_mess;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/* Do not reply with ERESTART in this protocol. The only possible caller,
* VFS, will find out through other means when we have restarted, and is not
* (fully) ready to deal with ERESTART errors.
*/
if (r == ERESTART)
return;
libchardriver: resolve Coverity warnings
2012-07-27 17:02:12 +02:00
memset(&reply_mess, 0, sizeof(reply_mess));
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
switch (mess->m_type) {
case DEV_OPEN:
libchardriver: fix open reply for async devices
2012-02-09 11:32:08 +01:00
reply_mess.m_type = DEV_OPEN_REPL;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
reply_mess.REP_ENDPT = mess->USER_ENDPT;
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
reply_mess.REP_STATUS = r;
break;
case DEV_CLOSE:
reply_mess.m_type = DEV_CLOSE_REPL;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
reply_mess.REP_ENDPT = mess->USER_ENDPT;
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
reply_mess.REP_STATUS = r;
break;
case DEV_READ_S:
case DEV_WRITE_S:
Add libdriver support for async ioctl replies
2010-10-08 11:33:18 +02:00
case DEV_IOCTL_S:
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
if (r == SUSPEND)
Server/driver protocols: no longer allow third-party copies. Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed to know which actual process to copy data from/to, as that process may not always be the caller. Now that we have full safecopy support, these fields have become useless for that purpose: the owner of the grant is *always* the caller. Allowing the caller to supply another endpoint is in fact dangerous, because the callee may then end up using a grant from a third party. One could call this a variant of the confused deputy problem. From now on, safecopy calls should always use the caller's endpoint as grant owner. This fully obsoletes the DL_ENDPT field in the inet/ethernet protocol. IO_ENDPT has other uses besides identifying the grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only because that is a more fitting name (it should never be used for I/O after all), but also in order to intentionally break any old system source code outside the base system. If this patch breaks your code, fixing it is fairly simple: - DL_ENDPT should be replaced with m_source; - IO_ENDPT should be replaced with m_source when used for safecopies; - IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g. when setting REP_ENDPT, matching requests in CANCEL calls, getting DEV_SELECT flags, and retrieving of the real user process's endpoint in DEV_OPEN. The changes in this patch are binary backward compatible.
2011-04-11 19:35:05 +02:00
printf("driver_task: reviving %d (%d) with SUSPEND\n",
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
mess->m_source, mess->USER_ENDPT);
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
reply_mess.m_type = DEV_REVIVE;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
reply_mess.REP_ENDPT = mess->USER_ENDPT;
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
reply_mess.REP_IO_GRANT = (cp_grant_id_t) mess->IO_GRANT;
reply_mess.REP_STATUS = r;
break;
case CANCEL:
/* The original request should send a reply. */
return;
case DEV_SELECT:
reply_mess.m_type = DEV_SEL_REPL1;
reply_mess.DEV_MINOR = mess->DEVICE;
reply_mess.DEV_SEL_OPS = r;
break;
default:
reply_mess.m_type = TASK_REPLY;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
reply_mess.REP_ENDPT = mess->USER_ENDPT;
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
/* Status is # of bytes transferred or error code. */
reply_mess.REP_STATUS = r;
break;
}
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
r = asynsend(mess->m_source, &reply_mess);
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
if (r != OK)
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
printf("asyn_reply: unable to asynsend reply to %d: %d\n",
mess->m_source, r);
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
}
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* sync_reply *
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static void sync_reply(message *m_ptr, int ipc_status, int reply)
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
{
/* Reply to a message sent to the driver. */
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
endpoint_t caller_e, user_e;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
int r;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
caller_e = m_ptr->m_source;
user_e = m_ptr->USER_ENDPT;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
m_ptr->m_type = TASK_REPLY;
m_ptr->REP_ENDPT = user_e;
m_ptr->REP_STATUS = reply;
/* If we would block sending the message, send it asynchronously. */
if (IPC_STATUS_CALL(ipc_status) == SENDREC)
r = sendnb(caller_e, m_ptr);
else
r = asynsend(caller_e, m_ptr);
if (r != OK)
printf("driver_reply: unable to send reply to %d: %d\n", caller_e, r);
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
}
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* send_reply *
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static void send_reply(int type, message *m_ptr, int ipc_status, int reply)
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
{
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/* Prepare and send a reply message. */
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
if (reply == EDONTREPLY)
return;
Driver refactory for live update and crash recovery. SYSLIB CHANGES: - DS calls to publish / retrieve labels consider endpoints instead of u32_t. VFS CHANGES: - mapdriver() only adds an entry in the dmap table in VFS. - dev_up() is only executed upon reception of a driver up event. INET CHANGES: - INET no longer searches for existing drivers instances at startup. - A newtwork driver is (re)initialized upon reception of a driver up event. - Networking startup is now race-free by design. No need to waste 5 seconds at startup any more. DRIVER CHANGES: - Every driver publishes driver up events when starting for the first time or in case of restart when recovery actions must be taken in the upper layers. - Driver up events are published by drivers through DS. - For regular drivers, VFS is normally the only subscriber, but not necessarily. For instance, when the filter driver is in use, it must subscribe to driver up events to initiate recovery. - For network drivers, inet is the only subscriber for now. - Every VFS driver is statically linked with libdriver, every network driver is statically linked with libnetdriver. DRIVER LIBRARIES CHANGES: - Libdriver is extended to provide generic receive() and ds_publish() interfaces for VFS drivers. - driver_receive() is a wrapper for sef_receive() also used in driver_task() to discard spurious messages that were meant to be delivered to a previous version of the driver. - driver_receive_mq() is the same as driver_receive() but integrates support for queued messages. - driver_announce() publishes a driver up event for VFS drivers and marks the driver as initialized and expecting a DEV_OPEN message. - Libnetdriver is introduced to provide similar receive() and ds_publish() interfaces for network drivers (netdriver_announce() and netdriver_receive()). - Network drivers all support live update with no state transfer now. KERNEL CHANGES: - Added kernel call statectl for state management. Used by driver_announce() to unblock eventual callers sendrecing to the driver.
2010-04-08 15:41:35 +02:00
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if (type == CHARDRIVER_ASYNC)
async_reply(m_ptr, reply);
else
sync_reply(m_ptr, ipc_status, reply);
Initial revision
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
* do_rdwt *
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static int do_rdwt(struct chardriver *cdp, message *mp)
Initial revision
2005-04-21 16:53:53 +02:00
{
/* Carry out a single read or write request. */
iovec_t iovec1;
int r, opcode;
First cut at 64-bit file offsets in block devices for mkfs/fsck.
2006-11-27 15:21:43 +01:00
u64_t position;
Initial revision
2005-04-21 16:53:53 +02:00
/* Disk address? Address and length of the user buffer? */
if (mp->COUNT < 0) return(EINVAL);
/* Prepare for I/O. */
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if ((*cdp->cdr_prepare)(mp->DEVICE) == NULL) return(ENXIO);
Initial revision
2005-04-21 16:53:53 +02:00
/* Create a one element scatter/gather vector for the buffer. */
VFS - no CANCEL for async non-blocking operations - if an operation (R, W, IOCTL) is non blocking, a flag is set and sent to the device. - nothing changes for sync devices - asyn devices should reply asap if an operation is non-blocking. We must trust the devices, but we had to trust them anyway to reply to CANCEL correctly - we safe sending CANCEL commands to asyn devices. This greatly simplifies the protocol. Asynchronous devices can always reply when a reply is ready and do not need to deal with other situations - currently, none of our drivers use the flags since they drive virtual devices which do not block
2012-02-20 14:19:29 +01:00
if(mp->m_type == DEV_READ_S)
opcode = DEV_GATHER_S;
else
opcode = DEV_SCATTER_S;
. made libdriver understand *_S variants . ioctl, transfer and 'other' functions get an extra parameter: 'safe', int is nonzero if function is called with *_S variant ('other' if ioctl)
2006-06-20 10:49:51 +02:00
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
iovec1.iov_addr = (vir_bytes) mp->IO_GRANT;
Initial revision
2005-04-21 16:53:53 +02:00
iovec1.iov_size = mp->COUNT;
/* Transfer bytes from/to the device. */
First cut at 64-bit file offsets in block devices for mkfs/fsck.
2006-11-27 15:21:43 +01:00
position= make64(mp->POSITION, mp->HIGHPOS);
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
r = (*cdp->cdr_transfer)(mp->m_source, opcode, position, &iovec1, 1,
VFS - no CANCEL for async non-blocking operations - if an operation (R, W, IOCTL) is non blocking, a flag is set and sent to the device. - nothing changes for sync devices - asyn devices should reply asap if an operation is non-blocking. We must trust the devices, but we had to trust them anyway to reply to CANCEL correctly - we safe sending CANCEL commands to asyn devices. This greatly simplifies the protocol. Asynchronous devices can always reply when a reply is ready and do not need to deal with other situations - currently, none of our drivers use the flags since they drive virtual devices which do not block
2012-02-20 14:19:29 +01:00
mp->USER_ENDPT, mp->FLAGS);
Initial revision
2005-04-21 16:53:53 +02:00
/* Return the number of bytes transferred or an error code. */
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
return(r == OK ? (int) (mp->COUNT - iovec1.iov_size) : r);
Initial revision
2005-04-21 16:53:53 +02:00
}
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/*===========================================================================*
* do_vrdwt *
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static int do_vrdwt(struct chardriver *cdp, message *mp)
Initial revision
2005-04-21 16:53:53 +02:00
{
/* Carry out an device read or write to/from a vector of user addresses.
* The "user addresses" are assumed to be safe, i.e. FS transferring to/from
* its own buffers, so they are not checked.
*/
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
iovec_t iovec[NR_IOREQS];
Initial revision
2005-04-21 16:53:53 +02:00
phys_bytes iovec_size;
unsigned nr_req;
Removed unused symbols. Minor cleanups.
2010-01-22 23:01:08 +01:00
int r, opcode;
First cut at 64-bit file offsets in block devices for mkfs/fsck.
2006-11-27 15:21:43 +01:00
u64_t position;
Initial revision
2005-04-21 16:53:53 +02:00
nr_req = mp->COUNT; /* Length of I/O vector */
libdriver changes: - remove obsolete non-safecopy support - merge libdriver and libdriver_asyn - change standard reply model from sendnb to senda
2009-12-02 10:57:48 +01:00
/* Copy the vector from the caller to kernel space. */
if (nr_req > NR_IOREQS) nr_req = NR_IOREQS;
iovec_size = (phys_bytes) (nr_req * sizeof(iovec[0]));
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if (OK != sys_safecopyfrom(mp->m_source, (vir_bytes) mp->IO_GRANT,
drop segment from safecopy invocations . all invocations were S or D, so can safely be dropped to prepare for the segmentless world . still assign D to the SCP_SEG field in the message to make previous kernels usable
2012-06-16 03:46:15 +02:00
0, (vir_bytes) iovec, iovec_size)) {
libdriver: don't panic so easily
2010-07-07 13:04:33 +02:00
printf("bad I/O vector by: %d\n", mp->m_source);
return(EINVAL);
Initial revision
2005-04-21 16:53:53 +02:00
}
/* Prepare for I/O. */
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if ((*cdp->cdr_prepare)(mp->DEVICE) == NULL) return(ENXIO);
Initial revision
2005-04-21 16:53:53 +02:00
/* Transfer bytes from/to the device. */
. made libdriver understand *_S variants . ioctl, transfer and 'other' functions get an extra parameter: 'safe', int is nonzero if function is called with *_S variant ('other' if ioctl)
2006-06-20 10:49:51 +02:00
opcode = mp->m_type;
First cut at 64-bit file offsets in block devices for mkfs/fsck.
2006-11-27 15:21:43 +01:00
position= make64(mp->POSITION, mp->HIGHPOS);
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
r = (*cdp->cdr_transfer)(mp->m_source, opcode, position, iovec, nr_req,
VFS - no CANCEL for async non-blocking operations - if an operation (R, W, IOCTL) is non blocking, a flag is set and sent to the device. - nothing changes for sync devices - asyn devices should reply asap if an operation is non-blocking. We must trust the devices, but we had to trust them anyway to reply to CANCEL correctly - we safe sending CANCEL commands to asyn devices. This greatly simplifies the protocol. Asynchronous devices can always reply when a reply is ready and do not need to deal with other situations - currently, none of our drivers use the flags since they drive virtual devices which do not block
2012-02-20 14:19:29 +01:00
mp->USER_ENDPT, mp->FLAGS);
Initial revision
2005-04-21 16:53:53 +02:00
/* Copy the I/O vector back to the caller. */
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if (OK != sys_safecopyto(mp->m_source, (vir_bytes) mp->IO_GRANT,
drop segment from safecopy invocations . all invocations were S or D, so can safely be dropped to prepare for the segmentless world . still assign D to the SCP_SEG field in the message to make previous kernels usable
2012-06-16 03:46:15 +02:00
0, (vir_bytes) iovec, iovec_size)) {
libdriver: don't panic so easily
2010-07-07 13:04:33 +02:00
printf("couldn't return I/O vector: %d\n", mp->m_source);
return(EINVAL);
. made libdriver understand *_S variants . ioctl, transfer and 'other' functions get an extra parameter: 'safe', int is nonzero if function is called with *_S variant ('other' if ioctl)
2006-06-20 10:49:51 +02:00
}
Initial revision
2005-04-21 16:53:53 +02:00
return(r);
}
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* handle_notify *
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static void handle_notify(struct chardriver *cdp, message *m_ptr)
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
{
/* Take care of the notifications (interrupt and clock messages) by calling the
* appropiate callback functions. Never send a reply.
*/
/* Call the appropriate function for this notification. */
switch (_ENDPOINT_P(m_ptr->m_source)) {
case CLOCK:
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if (cdp->cdr_alarm)
cdp->cdr_alarm(m_ptr);
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
break;
default:
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if (cdp->cdr_other)
(void) cdp->cdr_other(m_ptr);
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
}
}
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* handle_request *
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
static int handle_request(struct chardriver *cdp, message *m_ptr)
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
{
/* Call the appropiate driver function, based on the type of request. Return
* the result code that is to be sent back to the caller, or EDONTREPLY if no
* reply is to be sent.
*/
int r;
/* We might get spurious requests if the driver has been restarted. Deny any
* requests on devices that have not previously been opened, signaling the
* caller that something went wrong.
*/
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if (IS_CDEV_MINOR_RQ(m_ptr->m_type) && !is_open_dev(m_ptr->DEVICE)) {
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/* Reply ERESTART to spurious requests for unopened devices. */
if (m_ptr->m_type != DEV_OPEN)
return ERESTART;
/* Mark the device as opened otherwise. */
set_open_dev(m_ptr->DEVICE);
}
/* Call the appropriate function(s) for this request. */
switch (m_ptr->m_type) {
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
case DEV_OPEN: r = (*cdp->cdr_open)(m_ptr); break;
case DEV_CLOSE: r = (*cdp->cdr_close)(m_ptr); break;
case DEV_IOCTL_S: r = (*cdp->cdr_ioctl)(m_ptr); break;
case CANCEL: r = (*cdp->cdr_cancel)(m_ptr); break;
case DEV_SELECT: r = (*cdp->cdr_select)(m_ptr); break;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
case DEV_READ_S:
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
case DEV_WRITE_S: r = do_rdwt(cdp, m_ptr); break;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
case DEV_GATHER_S:
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
case DEV_SCATTER_S: r = do_vrdwt(cdp, m_ptr); break;
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
default:
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if (cdp->cdr_other)
r = cdp->cdr_other(m_ptr);
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
else
r = EINVAL;
}
/* Let the driver perform any cleanup. */
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
if (cdp->cdr_cleanup)
(*cdp->cdr_cleanup)();
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
return r;
}
Initial revision
2005-04-21 16:53:53 +02:00
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* chardriver_process *
Initial revision
2005-04-21 16:53:53 +02:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
void chardriver_process(struct chardriver *cdp, int driver_type,
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
message *m_ptr, int ipc_status)
Initial revision
2005-04-21 16:53:53 +02:00
{
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
/* Handle the given received message. */
int r;
/* Process the notification or request. */
if (is_ipc_notify(ipc_status)) {
handle_notify(cdp, m_ptr);
/* Do not reply to notifications. */
} else {
r = handle_request(cdp, m_ptr);
send_reply(driver_type, m_ptr, ipc_status, r);
}
Initial revision
2005-04-21 16:53:53 +02:00
}
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* chardriver_task *
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
void chardriver_task(struct chardriver *cdp, int driver_type)
Initial revision
2005-04-21 16:53:53 +02:00
{
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
/* Main program of any device driver task. */
int r, ipc_status;
message mess;
running = TRUE;
/* Here is the main loop of the disk task. It waits for a message, carries
* it out, and sends a reply.
*/
while (running) {
if ((r = sef_receive_status(ANY, &mess, &ipc_status)) != OK)
panic("driver_receive failed: %d", r);
chardriver_process(cdp, driver_type, &mess, ipc_status);
Initial revision
2005-04-21 16:53:53 +02:00
}
}
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* do_nop *
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
int do_nop(message *UNUSED(mp))
. made libdriver understand *_S variants . ioctl, transfer and 'other' functions get an extra parameter: 'safe', int is nonzero if function is called with *_S variant ('other' if ioctl)
2006-06-20 10:49:51 +02:00
{
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
return(OK);
. made libdriver understand *_S variants . ioctl, transfer and 'other' functions get an extra parameter: 'safe', int is nonzero if function is called with *_S variant ('other' if ioctl)
2006-06-20 10:49:51 +02:00
}
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* nop_ioctl *
ahci/libdriver: multithreading support This patch adds support for executing multiple concurrent requests on different devices on the same AHCI controller. The libdriver library has been extended to include a generic multithreading interface, and the AHCI driver has been extended to make use of this interface. The original version of this code has been written by Arne Welzel.
2011-11-02 17:31:38 +01:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
int nop_ioctl(message *UNUSED(mp))
Initial revision
2005-04-21 16:53:53 +02:00
{
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
return(ENOTTY);
Initial revision
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
* nop_alarm *
Initial revision
2005-04-21 16:53:53 +02:00
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
void nop_alarm(message *UNUSED(mp))
Initial revision
2005-04-21 16:53:53 +02:00
{
Split block/character protocols and libdriver This patch separates the character and block driver communication protocols. The old character protocol remains the same, but a new block protocol is introduced. The libdriver library is replaced by two new libraries: libchardriver and libblockdriver. Their exposed API, and drivers that use them, have been updated accordingly. Together, libbdev and libblockdriver now completely abstract away the message format used by the block protocol. As the memory driver is both a character and a block device driver, it now implements its own message loop. The most important semantic change made to the block protocol is that it is no longer possible to return both partial results and an error for a single transfer. This simplifies the interaction between the caller and the driver, as the I/O vector no longer needs to be copied back. Also, drivers are now no longer supposed to decide based on the layout of the I/O vector when a transfer should be cut short. Put simply, transfers are now supposed to either succeed completely, or result in an error. After this patch, the state of the various pieces is as follows: - block protocol: stable - libbdev API: stable for synchronous communication - libblockdriver API: needs slight revision (the drvlib/partition API in particular; the threading API will also change shortly) - character protocol: needs cleanup - libchardriver API: needs cleanup accordingly - driver restarts: largely unsupported until endpoint changes are reintroduced As a side effect, this patch eliminates several bugs, hacks, and gcc -Wall and -W warnings all over the place. It probably introduces a few new ones, too. Update warning: this patch changes the protocol between MFS and disk drivers, so in order to use old/new images, the MFS from the ramdisk must be used to mount all file systems.
2011-11-22 13:27:53 +01:00
/* Ignore the leftover alarm. */
Initial revision
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
* nop_cleanup *
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
void nop_cleanup(void)
Initial revision
2005-04-21 16:53:53 +02:00
{
/* Nothing to clean up. */
}
New log driver; buffers messages and makes them available to userland. Added some fields in the generic device table to support this driver using libdriver. Updated other drivers to fill these fields with nops and NULLs.
2005-07-08 19:23:44 +02:00
/*===========================================================================*
* nop_cancel *
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
int nop_cancel(message *UNUSED(m))
New log driver; buffers messages and makes them available to userland. Added some fields in the generic device table to support this driver using libdriver. Updated other drivers to fill these fields with nops and NULLs.
2005-07-08 19:23:44 +02:00
{
/* Nothing to do for cancel. */
Cleanup with gcc.
2005-08-25 14:50:11 +02:00
return(OK);
New log driver; buffers messages and makes them available to userland. Added some fields in the generic device table to support this driver using libdriver. Updated other drivers to fill these fields with nops and NULLs.
2005-07-08 19:23:44 +02:00
}
/*===========================================================================*
* nop_select *
*===========================================================================*/
retire PUBLIC, PRIVATE and FORWARD
2012-03-25 20:25:53 +02:00
int nop_select(message *UNUSED(m))
New log driver; buffers messages and makes them available to userland. Added some fields in the generic device table to support this driver using libdriver. Updated other drivers to fill these fields with nops and NULLs.
2005-07-08 19:23:44 +02:00
{
/* Nothing to do for select. */
Cleanup with gcc.
2005-08-25 14:50:11 +02:00
return(OK);
New log driver; buffers messages and makes them available to userland. Added some fields in the generic device table to support this driver using libdriver. Updated other drivers to fill these fields with nops and NULLs.
2005-07-08 19:23:44 +02:00
}
Reference in a new issue Copy permalink