minix/tests/dev/raidframe/t_raid.sh

324 lines
9.5 KiB
Bash
Raw Normal View History

#! /usr/bin/atf-sh
# $NetBSD: t_raid.sh,v 1.12 2013/02/19 21:08:24 joerg Exp $
#
# Copyright (c) 2010 The NetBSD Foundation, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
rawpart=`sysctl -n kern.rawpartition | tr '01234' 'abcde'`
rawraid=/dev/rraid0${rawpart}
raidserver="rump_server -lrumpvfs -lrumpdev -lrumpdev_disk -lrumpdev_raidframe"
makecfg()
{
level=${1}
ncol=${2}
printf "START array\n1 ${ncol} 0\nSTART disks\n" > raid.conf
diskn=0
while [ ${ncol} -gt ${diskn} ] ; do
echo "/disk${diskn}" >> raid.conf
diskn=$((diskn+1))
done
printf "START layout\n32 1 1 ${level}\nSTART queue\nfifo 100\n" \
>> raid.conf
}
atf_test_case smalldisk cleanup
smalldisk_head()
{
atf_set "descr" "Checks the raidframe works on small disks " \
"(PR kern/44239)"
atf_set "require.progs" "rump_server"
}
smalldisk_body()
{
makecfg 1 2
export RUMP_SERVER=unix://sock
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=1m \
-d key=/disk1,hostpath=disk1.img,size=1m \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -C raid.conf raid0
}
smalldisk_cleanup()
{
export RUMP_SERVER=unix://sock
rump.halt
}
# make this smaller once 44239 is fixed
export RAID_MEDIASIZE=32m
atf_test_case raid1_compfail cleanup
raid1_compfail_head()
{
atf_set "descr" "Checks that RAID1 works after component failure"
atf_set "require.progs" "rump_server"
}
raid1_compfail_body()
{
makecfg 1 2
export RUMP_SERVER=unix://sock
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -C raid.conf raid0
atf_check -s exit:0 rump.raidctl -I 12345 raid0
atf_check -s exit:0 -o ignore rump.raidctl -iv raid0
# put some data there
atf_check -s exit:0 -e ignore \
dd if=$(atf_get_srcdir)/t_raid of=testfile count=4
atf_check -s exit:0 -e ignore -x \
"dd if=testfile | rump.dd of=${rawraid} conv=sync"
# restart server with failed component
rump.halt
rm disk1.img # FAIL
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -c raid.conf raid0
# check if we we get what we wrote
atf_check -s exit:0 -o file:testfile -e ignore \
rump.dd if=${rawraid} count=4
}
raid1_compfail_cleanup()
{
export RUMP_SERVER=unix://sock
rump.halt
}
atf_test_case raid1_comp0fail cleanup
raid1_comp0fail_head()
{
atf_set "descr" "Checks configuring RAID1 after component 0 fails" \
"(PR kern/44251)"
atf_set "require.progs" "rump_server"
}
raid1_comp0fail_body()
{
makecfg 1 2
export RUMP_SERVER=unix://sock
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -C raid.conf raid0
atf_check -s exit:0 rump.raidctl -I 12345 raid0
atf_check -s exit:0 -o ignore rump.raidctl -iv raid0
# restart server with failed component
rump.halt
rm disk0.img # FAIL
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -c raid.conf raid0
}
raid1_comp0fail_cleanup()
{
export RUMP_SERVER=unix://sock
rump.halt
}
atf_test_case raid1_normal cleanup
raid1_normal_head()
{
atf_set "descr" "Checks that RAID1 -c configurations work " \
"in the normal case"
atf_set "require.progs" "rump_server"
}
raid1_normal_body()
{
makecfg 1 2
export RUMP_SERVER=unix://sock
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -C raid.conf raid0
atf_check -s exit:0 rump.raidctl -I 12345 raid0
atf_check -s exit:0 -o ignore rump.raidctl -iv raid0
# put some data there
atf_check -s exit:0 -e ignore \
dd if=$(atf_get_srcdir)/t_raid of=testfile count=4
atf_check -s exit:0 -e ignore -x \
"dd if=testfile | rump.dd of=${rawraid} conv=sync"
# restart server, disks remain normal
rump.halt
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -c raid.conf raid0
# check if we we get what we wrote
atf_check -s exit:0 -o file:testfile -e ignore \
rump.dd if=${rawraid} count=4
}
raid1_normal_cleanup()
{
export RUMP_SERVER=unix://sock
rump.halt
}
atf_test_case raid5_compfail cleanup
raid5_compfail_head()
{
atf_set "descr" "Checks that RAID5 works after component failure"
atf_set "require.progs" "rump_server"
}
raid5_compfail_body()
{
makecfg 5 3
export RUMP_SERVER=unix://sock
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
-d key=/disk2,hostpath=disk2.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -C raid.conf raid0
atf_check -s exit:0 rump.raidctl -I 12345 raid0
atf_check -s exit:0 -o ignore rump.raidctl -iv raid0
# put some data there
atf_check -s exit:0 -e ignore \
dd if=$(atf_get_srcdir)/t_raid of=testfile count=4
atf_check -s exit:0 -e ignore -x \
"dd if=testfile | rump.dd of=${rawraid} conv=sync"
# restart server with failed component
rump.halt
rm disk2.img # FAIL
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
-d key=/disk2,hostpath=disk2.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -c raid.conf raid0
# check if we we get what we wrote
atf_check -s exit:0 -o file:testfile -e ignore \
rump.dd if=${rawraid} count=4
}
raid5_compfail_cleanup()
{
export RUMP_SERVER=unix://sock
rump.halt
}
atf_test_case raid5_normal cleanup
raid5_normal_head()
{
atf_set "descr" "Checks that RAID5 works after normal shutdown " \
"and 'raidctl -c' startup"
atf_set "require.progs" "rump_server"
}
raid5_normal_body()
{
makecfg 5 3
export RUMP_SERVER=unix://sock
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
-d key=/disk2,hostpath=disk2.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -C raid.conf raid0
atf_check -s exit:0 rump.raidctl -I 12345 raid0
atf_check -s exit:0 -o ignore rump.raidctl -iv raid0
# put some data there
atf_check -s exit:0 -e ignore \
dd if=$(atf_get_srcdir)/t_raid of=testfile count=4
atf_check -s exit:0 -e ignore -x \
"dd if=testfile | rump.dd of=${rawraid} conv=sync"
# restart server after normal shutdown
rump.halt
atf_check -s exit:0 ${raidserver} \
-d key=/disk0,hostpath=disk0.img,size=${RAID_MEDIASIZE} \
-d key=/disk1,hostpath=disk1.img,size=${RAID_MEDIASIZE} \
-d key=/disk2,hostpath=disk2.img,size=${RAID_MEDIASIZE} \
${RUMP_SERVER}
atf_check -s exit:0 rump.raidctl -c raid.conf raid0
# check if we we get what we wrote
atf_check -s exit:0 -o file:testfile -e ignore \
rump.dd if=${rawraid} count=4
}
raid5_normal_cleanup()
{
export RUMP_SERVER=unix://sock
rump.halt
}
atf_init_test_cases()
{
atf_add_test_case smalldisk
atf_add_test_case raid1_normal
atf_add_test_case raid1_comp0fail
atf_add_test_case raid1_compfail
atf_add_test_case raid5_normal
atf_add_test_case raid5_compfail
}