gem5/dev/tsunami_uart.cc
Ali Saidi fd21387149 Linux boots... various fixes to make console work correctly
dev/console.cc:
    commented out code that checks if an interrupt is happening before issuing one
    because they can get lost when linux boots
dev/console.hh:
    added a setPlatform function to set the platform to interrupt
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
    Added virtual functions to post console interrupts
dev/tsunami_io.cc:
    allowed a 64bit read of the PIC since we can't do a physical byte read
dev/tsunami_uart.cc:
    moved TsunamiUart to PioDevice
    various little fixes to make linux work
dev/tsunami_uart.hh:
    Made Tsunami_Uart a PIO device
dev/tsunamireg.h:
    added some UART defines and used the ULL macros
kern/linux/linux_system.cc:
    commented out waiting for gdb

--HG--
extra : convert_revision : 8cfd0700f3812ab349a6d7f132f85f4f421c5c5e
2004-05-14 17:34:15 -04:00

251 lines
6.6 KiB
C++

/* $Id$ */
/* @file
* Tsunami UART
*/
/*
* Copyright (C) 1998 by the Board of Trustees
* of Leland Stanford Junior University.
* Copyright (C) 1998 Digital Equipment Corporation
*
* This file is part of the SimOS distribution.
* See LICENSE file for terms of the license.
*
*/
#include <string>
#include <vector>
#include "base/inifile.hh"
#include "base/str.hh" // for to_number
#include "base/trace.hh"
#include "dev/console.hh"
#include "dev/tsunami_uart.hh"
#include "mem/bus/bus.hh"
#include "mem/bus/pio_interface.hh"
#include "mem/bus/pio_interface_impl.hh"
#include "mem/functional_mem/memory_control.hh"
#include "sim/builder.hh"
#include "targetarch/ev5.hh"
using namespace std;
#define CONS_INT_TX 0x01 // interrupt enable / state bits
#define CONS_INT_RX 0x02
TsunamiUart::TsunamiUart(const string &name, SimConsole *c,
MemoryController *mmu, Addr a,
HierParams *hier, Bus *bus)
: PioDevice(name), addr(a), cons(c), status_store(0), valid_char(false)
{
mmu->add_child(this, Range<Addr>(addr, addr + size));
if (bus) {
pioInterface = newPioInterface(name, hier, bus, this,
&TsunamiUart::cacheAccess);
pioInterface->addAddrRange(addr, addr + size - 1);
}
IER = 0;
}
Fault
TsunamiUart::read(MemReqPtr &req, uint8_t *data)
{
Addr daddr = req->paddr - (addr & PA_IMPL_MASK);
DPRINTF(TsunamiUart, " read register %#x\n", daddr);
switch (req->size) {
case sizeof(uint64_t):
*(uint64_t *)data = 0;
break;
case sizeof(uint32_t):
*(uint32_t *)data = 0;
break;
case sizeof(uint16_t):
*(uint16_t *)data = 0;
break;
case sizeof(uint8_t):
*(uint8_t *)data = 0;
break;
}
switch(daddr) {
case 0x5: // Status Register
{
int status = cons->intStatus();
if (!valid_char) {
valid_char = cons->in(next_char);
if (!valid_char)
status &= ~CONS_INT_RX;
} else {
status |= CONS_INT_RX;
}
if (status_store == 3) {
// RR3 stuff? Don't really understand it, btw
status_store = 0;
if (status & CONS_INT_TX) {
*data = (1 << 4);
return No_Fault;
} else if (status & CONS_INT_RX) {
*data = (1 << 5);
return No_Fault;
} else {
DPRINTF(TsunamiUart, "spurious read\n");
return No_Fault;
}
} else {
int reg = (1 << 2) | (1 << 5) | (1 << 6);
if (status & CONS_INT_RX)
reg |= (1 << 0);
*data = reg;
return No_Fault;
}
break;
}
case 0x0: // Data register (RX)
// if (!valid_char)
// panic("Invalid character");
DPRINTF(TsunamiUart, "read data register \'%c\' %#02x\n",
isprint(next_char) ? next_char : ' ', next_char);
*data = next_char;
valid_char = false;
return No_Fault;
case 0x1: // Interrupt Enable Register
// This is the lovely way linux checks there is actually a serial
// port at the desired address
if (IER == 0)
*data = 0;
else if (IER == 0x0F)
*data = 0x0F;
else
*data = 0;
return No_Fault;
case 0x2:
*data = 0; // This means a 8250 serial port, do we want a 16550?
return No_Fault;
}
*data = 0;
// panic("%s: read daddr=%#x type=read *data=%#x\n", name(), daddr, *data);
return No_Fault;
}
Fault
TsunamiUart::write(MemReqPtr &req, const uint8_t *data)
{
Addr daddr = req->paddr - (addr & PA_IMPL_MASK);
DPRINTF(TsunamiUart, " write register %#x value %#x\n", daddr, *(uint8_t*)data);
switch (daddr) {
case 0x3:
status_store = *data;
switch (*data) {
case 0x03: // going to read RR3
return No_Fault;
case 0x28: // Ack of TX
{
if ((cons->intStatus() & CONS_INT_TX) == 0)
panic("Ack of transmit, though there was no interrupt");
cons->clearInt(CONS_INT_TX);
return No_Fault;
}
case 0x00:
case 0x01:
case 0x12:
// going to write data???
return No_Fault;
default:
DPRINTF(TsunamiUart, "writing status register %#x \n",
*(uint8_t *)data);
return No_Fault;
}
case 0x0: // Data register (TX)
char ourchar;
ourchar = *(uint64_t *)data;
if ((isprint(ourchar) || iscntrl(ourchar)) && (ourchar != 0x0C))
cons->out(ourchar);
if (UART_IER_THRI & IER)
cons->setInt(CONS_INT_TX);
return No_Fault;
break;
case 0x1: // DLM
DPRINTF(TsunamiUart, "writing to DLM/IER %#x\n", *(uint8_t*)data);
IER = *(uint8_t*)data;
if (UART_IER_THRI & IER)
cons->setInt(CONS_INT_TX);
return No_Fault;
break;
case 0x4: // MCR
DPRINTF(TsunamiUart, "writing to MCR %#x\n", *(uint8_t*)data);
return No_Fault;
}
return No_Fault;
}
Tick
TsunamiUart::cacheAccess(MemReqPtr &req)
{
return curTick + 1000;
}
void
TsunamiUart::serialize(ostream &os)
{
SERIALIZE_SCALAR(status_store);
SERIALIZE_SCALAR(next_char);
SERIALIZE_SCALAR(valid_char);
SERIALIZE_SCALAR(IER);
}
void
TsunamiUart::unserialize(Checkpoint *cp, const std::string &section)
{
UNSERIALIZE_SCALAR(status_store);
UNSERIALIZE_SCALAR(next_char);
UNSERIALIZE_SCALAR(valid_char);
UNSERIALIZE_SCALAR(IER);
}
BEGIN_DECLARE_SIM_OBJECT_PARAMS(TsunamiUart)
SimObjectParam<SimConsole *> console;
SimObjectParam<MemoryController *> mmu;
Param<Addr> addr;
SimObjectParam<Bus*> io_bus;
SimObjectParam<HierParams *> hier;
END_DECLARE_SIM_OBJECT_PARAMS(TsunamiUart)
BEGIN_INIT_SIM_OBJECT_PARAMS(TsunamiUart)
INIT_PARAM(console, "The console"),
INIT_PARAM(mmu, "Memory Controller"),
INIT_PARAM(addr, "Device Address"),
INIT_PARAM_DFLT(io_bus, "The IO Bus to attach to", NULL),
INIT_PARAM_DFLT(hier, "Hierarchy global variables", &defaultHierParams)
END_INIT_SIM_OBJECT_PARAMS(TsunamiUart)
CREATE_SIM_OBJECT(TsunamiUart)
{
return new TsunamiUart(getInstanceName(), console, mmu, addr, hier, io_bus);
}
REGISTER_SIM_OBJECT("TsunamiUart", TsunamiUart)