gem5/tests/long/fs/10.linux-boot/ref/arm/linux/realview-o3-dual/system.terminal

214 lines
11 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.13.0-rc2 (tony@vamp) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Mon Oct 13 15:09:23 EDT 2014
Kernel was built at commit id ''
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 8072dcc0, node_mem_map 8078f000
Normal zone: 512 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 65536 pages, LIFO batch:15
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @80996000 s11648 r8192 d12928 u32768
pcpu-alloc: s11648 r8192 d12928 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=256MB root=/dev/sda1
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 235656K/262144K available (5248K kernel code, 249K rwdata, 1540K rodata, 295K init, 368K bss, 26488K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0x90800000 - 0xff000000 (1768 MB)
lowmem : 0x80000000 - 0x90000000 ( 256 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x806a942c (6790 kB)
.init : 0x806aa000 - 0x806f3d80 ( 296 kB)
.data : 0x806f4000 - 0x80732754 ( 250 kB)
.bss : 0x80732754 - 0x8078e9d8 ( 369 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
/cpus/cpu@1 missing clock-frequency property
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x804fee68 - 0x804fee9c
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/aaci@040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/mmci@050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 1
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 1
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
hw-breakpoint: CPU 1 failed to disable vector catch
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 460
io scheduler noop registered (default)
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
PCI: enabling device 0000:00:00.0 (0040 -> 0042)
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 1048320 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
ixgbe: Copyright (c) 1999-2013 Intel Corporation.
ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.11.3-k
ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
VFS: Mounted root (ext2 filesystem) on device 8:1.
Freeing unused kernel memory: 292K (806aa000 - 806f3000)
init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
starting pid 680, tty '': '/etc/rc.d/rc.local'
warning: can't open /etc/mtab: No such file or directory
Thu Jan 1 00:00:02 UTC 2009
S: devpts
Thu Jan 1 00:00:02 UTC 2009