21df09cf7a
cpu/base_dyn_inst.hh: Remove snoop function (did not mean to commit it). cpu/ozone/back_end_impl.hh: Set instruction as having its result ready, not completed. cpu/ozone/cpu.hh: Fixes for store conditionals. Use an additional lock addr list to make sure that the access is valid. I don't know if this is fully necessary, but it gives me a peace of mind (at some performance cost). Make sure to schedule for cycles(1) and not just 1 cycle in the future as tick = 1ps. Also support the new Checker. cpu/ozone/cpu_builder.cc: Add parameter for maxOutstandingMemOps so it can be set through the config. Also add in the checker. Right now it's a BaseCPU simobject, but that may change in the future. cpu/ozone/cpu_impl.hh: Add support for the checker. For now there's a dynamic cast to convert the simobject passed back from the builder to the proper Checker type. It's ugly, but only happens at startup, and is probably a justified use of dynamic cast. Support switching out/taking over from other CPUs. Correct indexing problem for float registers. cpu/ozone/dyn_inst.hh: Add ability for instructions to wait on memory instructions in addition to source register instructions. This is needed for memory dependence predictors and memory barriers. cpu/ozone/dyn_inst_impl.hh: Support waiting on memory operations. Use "resultReady" to differentiate an instruction having its registers produced vs being totally completed. cpu/ozone/front_end.hh: Support switching out. Also record if an interrupt is pending. cpu/ozone/front_end_impl.hh: Support switching out. Also support stalling the front end if an interrupt is pending. cpu/ozone/lw_back_end.hh: Add checker in. Support switching out. Support memory barriers. cpu/ozone/lw_back_end_impl.hh: Lots of changes to get things to work right. Faults, traps, interrupts all wait until all stores have written back (important). Memory barriers are supported, as is the general ability for instructions to be dependent on other memory instructions. cpu/ozone/lw_lsq.hh: Support switching out. Also use store writeback events in all cases, not just dcache misses. cpu/ozone/lw_lsq_impl.hh: Support switching out. Also use store writeback events in all cases, not just dcache misses. Support the checker CPU. Marks instructions as completed once the functional access is done (which has to be done for the checker to be able to verify results). cpu/ozone/simple_params.hh: Add max outstanding mem ops parameter. python/m5/objects/OzoneCPU.py: Add max outstanding mem ops, checker. --HG-- extra : convert_revision : f4d408e1bb1f25836a097b6abe3856111e950c59
1242 lines
31 KiB
C++
1242 lines
31 KiB
C++
/*
|
|
* Copyright (c) 2005 The Regents of The University of Michigan
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met: redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer;
|
|
* redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution;
|
|
* neither the name of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <cstdio>
|
|
#include <cstdlib>
|
|
|
|
#include "arch/isa_traits.hh" // For MachInst
|
|
#include "base/trace.hh"
|
|
#include "config/full_system.hh"
|
|
#include "cpu/base.hh"
|
|
#include "cpu/checker/exec_context.hh"
|
|
#include "cpu/exec_context.hh"
|
|
#include "cpu/exetrace.hh"
|
|
#include "cpu/ozone/cpu.hh"
|
|
#include "cpu/quiesce_event.hh"
|
|
#include "cpu/static_inst.hh"
|
|
#include "mem/base_mem.hh"
|
|
#include "mem/mem_interface.hh"
|
|
#include "sim/sim_object.hh"
|
|
#include "sim/stats.hh"
|
|
|
|
#if FULL_SYSTEM
|
|
#include "arch/faults.hh"
|
|
#include "arch/alpha/osfpal.hh"
|
|
#include "arch/alpha/tlb.hh"
|
|
#include "arch/vtophys.hh"
|
|
#include "base/callback.hh"
|
|
#include "base/remote_gdb.hh"
|
|
#include "cpu/profile.hh"
|
|
#include "kern/kernel_stats.hh"
|
|
#include "mem/functional/memory_control.hh"
|
|
#include "mem/functional/physical.hh"
|
|
#include "sim/faults.hh"
|
|
#include "sim/sim_events.hh"
|
|
#include "sim/sim_exit.hh"
|
|
#include "sim/system.hh"
|
|
#else // !FULL_SYSTEM
|
|
#include "mem/functional/functional.hh"
|
|
#include "sim/process.hh"
|
|
#endif // FULL_SYSTEM
|
|
|
|
using namespace TheISA;
|
|
|
|
template <class Impl>
|
|
template<typename T>
|
|
void
|
|
OzoneCPU<Impl>::trace_data(T data) {
|
|
if (traceData) {
|
|
traceData->setData(data);
|
|
}
|
|
}
|
|
|
|
template <class Impl>
|
|
OzoneCPU<Impl>::TickEvent::TickEvent(OzoneCPU *c, int w)
|
|
: Event(&mainEventQueue, CPU_Tick_Pri), cpu(c), width(w)
|
|
{
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::TickEvent::process()
|
|
{
|
|
cpu->tick();
|
|
}
|
|
|
|
template <class Impl>
|
|
const char *
|
|
OzoneCPU<Impl>::TickEvent::description()
|
|
{
|
|
return "OzoneCPU tick event";
|
|
}
|
|
/*
|
|
template <class Impl>
|
|
OzoneCPU<Impl>::ICacheCompletionEvent::ICacheCompletionEvent(OzoneCPU *_cpu)
|
|
: Event(&mainEventQueue),
|
|
cpu(_cpu)
|
|
{
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::ICacheCompletionEvent::process()
|
|
{
|
|
cpu->processICacheCompletion();
|
|
}
|
|
|
|
template <class Impl>
|
|
const char *
|
|
OzoneCPU<Impl>::ICacheCompletionEvent::description()
|
|
{
|
|
return "OzoneCPU I-cache completion event";
|
|
}
|
|
|
|
template <class Impl>
|
|
OzoneCPU<Impl>::DCacheCompletionEvent::
|
|
DCacheCompletionEvent(OzoneCPU *_cpu,
|
|
DynInstPtr &_inst,
|
|
DCacheCompEventIt &_dcceIt)
|
|
: Event(&mainEventQueue),
|
|
cpu(_cpu),
|
|
inst(_inst),
|
|
dcceIt(_dcceIt)
|
|
{
|
|
this->setFlags(Event::AutoDelete);
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::DCacheCompletionEvent::process()
|
|
{
|
|
inst->setCompleted();
|
|
|
|
// Maybe remove the EA from the list of addrs?
|
|
cpu->eaList.clearAddr(inst->seqNum, inst->getEA());
|
|
cpu->dCacheCompList.erase(this->dcceIt);
|
|
}
|
|
|
|
template <class Impl>
|
|
const char *
|
|
OzoneCPU<Impl>::DCacheCompletionEvent::description()
|
|
{
|
|
return "OzoneCPU D-cache completion event";
|
|
}
|
|
*/
|
|
template <class Impl>
|
|
OzoneCPU<Impl>::OzoneCPU(Params *p)
|
|
#if FULL_SYSTEM
|
|
: BaseCPU(p), thread(this, 0, p->mem), tickEvent(this, p->width), mem(p->mem),
|
|
#else
|
|
: BaseCPU(p), thread(this, 0, p->workload[0], 0), tickEvent(this, p->width),
|
|
mem(p->workload[0]->getMemory()),
|
|
#endif
|
|
comm(5, 5)
|
|
{
|
|
if (p->checker) {
|
|
BaseCPU *temp_checker = p->checker;
|
|
checker = dynamic_cast<Checker<DynInstPtr> *>(temp_checker);
|
|
} else {
|
|
checker = NULL;
|
|
}
|
|
frontEnd = new FrontEnd(p);
|
|
backEnd = new BackEnd(p);
|
|
|
|
_status = Idle;
|
|
if (checker) {
|
|
checker->setMemory(mem);
|
|
#if FULL_SYSTEM
|
|
checker->setSystem(p->system);
|
|
#endif
|
|
checkerXC = new CheckerExecContext<OzoneXC>(&ozoneXC, checker);
|
|
thread.xcProxy = checkerXC;
|
|
xcProxy = checkerXC;
|
|
} else {
|
|
thread.xcProxy = &ozoneXC;
|
|
xcProxy = &ozoneXC;
|
|
}
|
|
|
|
thread.inSyscall = false;
|
|
|
|
ozoneXC.cpu = this;
|
|
ozoneXC.thread = &thread;
|
|
|
|
thread.setStatus(ExecContext::Suspended);
|
|
#if FULL_SYSTEM
|
|
// xc = new ExecContext(this, 0, p->system, p->itb, p->dtb, p->mem);
|
|
|
|
/***** All thread state stuff *****/
|
|
thread.cpu = this;
|
|
thread.tid = 0;
|
|
thread.mem = p->mem;
|
|
|
|
thread.quiesceEvent = new EndQuiesceEvent(xcProxy);
|
|
|
|
system = p->system;
|
|
itb = p->itb;
|
|
dtb = p->dtb;
|
|
memctrl = p->system->memctrl;
|
|
physmem = p->system->physmem;
|
|
|
|
if (p->profile) {
|
|
thread.profile = new FunctionProfile(p->system->kernelSymtab);
|
|
// @todo: This might be better as an ExecContext instead of OzoneXC
|
|
Callback *cb =
|
|
new MakeCallback<OzoneXC,
|
|
&OzoneXC::dumpFuncProfile>(&ozoneXC);
|
|
registerExitCallback(cb);
|
|
}
|
|
|
|
// let's fill with a dummy node for now so we don't get a segfault
|
|
// on the first cycle when there's no node available.
|
|
static ProfileNode dummyNode;
|
|
thread.profileNode = &dummyNode;
|
|
thread.profilePC = 3;
|
|
#else
|
|
// xc = new ExecContext(this, /* thread_num */ 0, p->workload[0], /* asid */ 0);
|
|
thread.cpu = this;
|
|
thread.tid = 0;
|
|
thread.process = p->workload[0];
|
|
// thread.mem = thread.process->getMemory();
|
|
thread.asid = 0;
|
|
#endif // !FULL_SYSTEM
|
|
/*
|
|
icacheInterface = p->icache_interface;
|
|
dcacheInterface = p->dcache_interface;
|
|
|
|
cacheMemReq = new MemReq();
|
|
cacheMemReq->xc = xc;
|
|
cacheMemReq->asid = 0;
|
|
cacheMemReq->data = new uint8_t[64];
|
|
*/
|
|
numInst = 0;
|
|
startNumInst = 0;
|
|
/* numLoad = 0;
|
|
startNumLoad = 0;
|
|
lastIcacheStall = 0;
|
|
lastDcacheStall = 0;
|
|
|
|
issueWidth = p->issueWidth;
|
|
*/
|
|
execContexts.push_back(xcProxy);
|
|
|
|
frontEnd->setCPU(this);
|
|
backEnd->setCPU(this);
|
|
|
|
frontEnd->setXC(xcProxy);
|
|
backEnd->setXC(xcProxy);
|
|
|
|
frontEnd->setThreadState(&thread);
|
|
backEnd->setThreadState(&thread);
|
|
|
|
frontEnd->setCommBuffer(&comm);
|
|
backEnd->setCommBuffer(&comm);
|
|
|
|
frontEnd->setBackEnd(backEnd);
|
|
backEnd->setFrontEnd(frontEnd);
|
|
|
|
decoupledFrontEnd = p->decoupledFrontEnd;
|
|
|
|
globalSeqNum = 1;
|
|
|
|
checkInterrupts = false;
|
|
|
|
for (int i = 0; i < TheISA::TotalNumRegs; ++i) {
|
|
thread.renameTable[i] = new DynInst(this);
|
|
thread.renameTable[i]->setResultReady();
|
|
}
|
|
|
|
frontEnd->renameTable.copyFrom(thread.renameTable);
|
|
backEnd->renameTable.copyFrom(thread.renameTable);
|
|
|
|
#if !FULL_SYSTEM
|
|
// pTable = p->pTable;
|
|
#endif
|
|
|
|
lockFlag = 0;
|
|
|
|
DPRINTF(OzoneCPU, "OzoneCPU: Created Ozone cpu object.\n");
|
|
}
|
|
|
|
template <class Impl>
|
|
OzoneCPU<Impl>::~OzoneCPU()
|
|
{
|
|
}
|
|
/*
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::copyFromXC()
|
|
{
|
|
for (int i = 0; i < TheISA::TotalNumRegs; ++i) {
|
|
if (i < TheISA::NumIntRegs) {
|
|
renameTable[i]->setIntResult(xc->readIntReg(i));
|
|
} else if (i < TheISA::NumFloatRegs) {
|
|
renameTable[i]->setDoubleResult(xc->readFloatRegDouble(i));
|
|
}
|
|
}
|
|
|
|
DPRINTF(OzoneCPU, "Func Exe inst is: %i\n", xc->func_exe_inst);
|
|
backEnd->funcExeInst = xc->func_exe_inst;
|
|
// PC = xc->readPC();
|
|
// nextPC = xc->regs.npc;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::copyToXC()
|
|
{
|
|
for (int i = 0; i < TheISA::TotalNumRegs; ++i) {
|
|
if (i < TheISA::NumIntRegs) {
|
|
xc->setIntReg(i, renameTable[i]->readIntResult());
|
|
} else if (i < TheISA::NumFloatRegs) {
|
|
xc->setFloatRegDouble(i, renameTable[i]->readDoubleResult());
|
|
}
|
|
}
|
|
|
|
this->xc->regs.miscRegs.fpcr = this->regFile.miscRegs[tid].fpcr;
|
|
this->xc->regs.miscRegs.uniq = this->regFile.miscRegs[tid].uniq;
|
|
this->xc->regs.miscRegs.lock_flag = this->regFile.miscRegs[tid].lock_flag;
|
|
this->xc->regs.miscRegs.lock_addr = this->regFile.miscRegs[tid].lock_addr;
|
|
|
|
xc->func_exe_inst = backEnd->funcExeInst;
|
|
xc->regs.pc = PC;
|
|
xc->regs.npc = nextPC;
|
|
}
|
|
*/
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::switchOut(Sampler *sampler)
|
|
{
|
|
// Front end needs state from back end, so switch out the back end first.
|
|
backEnd->switchOut();
|
|
frontEnd->switchOut();
|
|
_status = SwitchedOut;
|
|
if (tickEvent.scheduled())
|
|
tickEvent.squash();
|
|
sampler->signalSwitched();
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::takeOverFrom(BaseCPU *oldCPU)
|
|
{
|
|
BaseCPU::takeOverFrom(oldCPU);
|
|
|
|
backEnd->takeOverFrom();
|
|
frontEnd->takeOverFrom();
|
|
assert(!tickEvent.scheduled());
|
|
|
|
// @todo: Fix hardcoded number
|
|
// Clear out any old information in time buffer.
|
|
for (int i = 0; i < 6; ++i) {
|
|
comm.advance();
|
|
}
|
|
|
|
// if any of this CPU's ExecContexts are active, mark the CPU as
|
|
// running and schedule its tick event.
|
|
for (int i = 0; i < execContexts.size(); ++i) {
|
|
ExecContext *xc = execContexts[i];
|
|
if (xc->status() == ExecContext::Active &&
|
|
_status != Running) {
|
|
_status = Running;
|
|
tickEvent.schedule(curTick);
|
|
}
|
|
}
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::activateContext(int thread_num, int delay)
|
|
{
|
|
// Eventually change this in SMT.
|
|
assert(thread_num == 0);
|
|
// assert(xcProxy);
|
|
|
|
assert(_status == Idle);
|
|
notIdleFraction++;
|
|
scheduleTickEvent(delay);
|
|
_status = Running;
|
|
thread._status = ExecContext::Active;
|
|
frontEnd->wakeFromQuiesce();
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::suspendContext(int thread_num)
|
|
{
|
|
// Eventually change this in SMT.
|
|
assert(thread_num == 0);
|
|
// assert(xcProxy);
|
|
// @todo: Figure out how to initially set the status properly so this is running.
|
|
// assert(_status == Running);
|
|
notIdleFraction--;
|
|
unscheduleTickEvent();
|
|
_status = Idle;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::deallocateContext(int thread_num)
|
|
{
|
|
// for now, these are equivalent
|
|
suspendContext(thread_num);
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::haltContext(int thread_num)
|
|
{
|
|
// for now, these are equivalent
|
|
suspendContext(thread_num);
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::regStats()
|
|
{
|
|
using namespace Stats;
|
|
|
|
BaseCPU::regStats();
|
|
|
|
thread.numInsts
|
|
.name(name() + ".num_insts")
|
|
.desc("Number of instructions executed")
|
|
;
|
|
|
|
thread.numMemRefs
|
|
.name(name() + ".num_refs")
|
|
.desc("Number of memory references")
|
|
;
|
|
|
|
notIdleFraction
|
|
.name(name() + ".not_idle_fraction")
|
|
.desc("Percentage of non-idle cycles")
|
|
;
|
|
|
|
idleFraction
|
|
.name(name() + ".idle_fraction")
|
|
.desc("Percentage of idle cycles")
|
|
;
|
|
|
|
quiesceCycles
|
|
.name(name() + ".quiesce_cycles")
|
|
.desc("Number of cycles spent in quiesce")
|
|
;
|
|
|
|
idleFraction = constant(1.0) - notIdleFraction;
|
|
|
|
frontEnd->regStats();
|
|
backEnd->regStats();
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::resetStats()
|
|
{
|
|
startNumInst = numInst;
|
|
notIdleFraction = (_status != Idle);
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::init()
|
|
{
|
|
BaseCPU::init();
|
|
/*
|
|
copyFromXC();
|
|
|
|
// ALso copy over PC/nextPC. This isn't normally copied in "copyFromXC()"
|
|
// so that the XC doesn't mess up the PC when returning from a syscall.
|
|
PC = xc->readPC();
|
|
nextPC = xc->regs.npc;
|
|
*/
|
|
// Mark this as in syscall so it won't need to squash
|
|
thread.inSyscall = true;
|
|
#if FULL_SYSTEM
|
|
for (int i = 0; i < execContexts.size(); ++i) {
|
|
ExecContext *xc = execContexts[i];
|
|
|
|
// initialize CPU, including PC
|
|
TheISA::initCPU(xc, xc->readCpuId());
|
|
}
|
|
#endif
|
|
frontEnd->renameTable.copyFrom(thread.renameTable);
|
|
backEnd->renameTable.copyFrom(thread.renameTable);
|
|
|
|
thread.inSyscall = false;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::serialize(std::ostream &os)
|
|
{
|
|
// At this point, all DCacheCompEvents should be processed.
|
|
|
|
BaseCPU::serialize(os);
|
|
SERIALIZE_ENUM(_status);
|
|
nameOut(os, csprintf("%s.xc", name()));
|
|
ozoneXC.serialize(os);
|
|
nameOut(os, csprintf("%s.tickEvent", name()));
|
|
tickEvent.serialize(os);
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::unserialize(Checkpoint *cp, const std::string §ion)
|
|
{
|
|
BaseCPU::unserialize(cp, section);
|
|
UNSERIALIZE_ENUM(_status);
|
|
ozoneXC.unserialize(cp, csprintf("%s.xc", section));
|
|
tickEvent.unserialize(cp, csprintf("%s.tickEvent", section));
|
|
}
|
|
|
|
template <class Impl>
|
|
Fault
|
|
OzoneCPU<Impl>::copySrcTranslate(Addr src)
|
|
{
|
|
panic("Copy not implemented!\n");
|
|
return NoFault;
|
|
#if 0
|
|
static bool no_warn = true;
|
|
int blk_size = (dcacheInterface) ? dcacheInterface->getBlockSize() : 64;
|
|
// Only support block sizes of 64 atm.
|
|
assert(blk_size == 64);
|
|
int offset = src & (blk_size - 1);
|
|
|
|
// Make sure block doesn't span page
|
|
if (no_warn &&
|
|
(src & TheISA::PageMask) != ((src + blk_size) & TheISA::PageMask) &&
|
|
(src >> 40) != 0xfffffc) {
|
|
warn("Copied block source spans pages %x.", src);
|
|
no_warn = false;
|
|
}
|
|
|
|
memReq->reset(src & ~(blk_size - 1), blk_size);
|
|
|
|
// translate to physical address
|
|
Fault fault = xc->translateDataReadReq(memReq);
|
|
|
|
assert(fault != Alignment_Fault);
|
|
|
|
if (fault == NoFault) {
|
|
xc->copySrcAddr = src;
|
|
xc->copySrcPhysAddr = memReq->paddr + offset;
|
|
} else {
|
|
xc->copySrcAddr = 0;
|
|
xc->copySrcPhysAddr = 0;
|
|
}
|
|
return fault;
|
|
#endif
|
|
}
|
|
|
|
template <class Impl>
|
|
Fault
|
|
OzoneCPU<Impl>::copy(Addr dest)
|
|
{
|
|
panic("Copy not implemented!\n");
|
|
return NoFault;
|
|
#if 0
|
|
static bool no_warn = true;
|
|
int blk_size = (dcacheInterface) ? dcacheInterface->getBlockSize() : 64;
|
|
// Only support block sizes of 64 atm.
|
|
assert(blk_size == 64);
|
|
uint8_t data[blk_size];
|
|
//assert(xc->copySrcAddr);
|
|
int offset = dest & (blk_size - 1);
|
|
|
|
// Make sure block doesn't span page
|
|
if (no_warn &&
|
|
(dest & TheISA::PageMask) != ((dest + blk_size) & TheISA::PageMask) &&
|
|
(dest >> 40) != 0xfffffc) {
|
|
no_warn = false;
|
|
warn("Copied block destination spans pages %x. ", dest);
|
|
}
|
|
|
|
memReq->reset(dest & ~(blk_size -1), blk_size);
|
|
// translate to physical address
|
|
Fault fault = xc->translateDataWriteReq(memReq);
|
|
|
|
assert(fault != Alignment_Fault);
|
|
|
|
if (fault == NoFault) {
|
|
Addr dest_addr = memReq->paddr + offset;
|
|
// Need to read straight from memory since we have more than 8 bytes.
|
|
memReq->paddr = xc->copySrcPhysAddr;
|
|
xc->mem->read(memReq, data);
|
|
memReq->paddr = dest_addr;
|
|
xc->mem->write(memReq, data);
|
|
if (dcacheInterface) {
|
|
memReq->cmd = Copy;
|
|
memReq->completionEvent = NULL;
|
|
memReq->paddr = xc->copySrcPhysAddr;
|
|
memReq->dest = dest_addr;
|
|
memReq->size = 64;
|
|
memReq->time = curTick;
|
|
dcacheInterface->access(memReq);
|
|
}
|
|
}
|
|
return fault;
|
|
#endif
|
|
}
|
|
|
|
#if FULL_SYSTEM
|
|
template <class Impl>
|
|
Addr
|
|
OzoneCPU<Impl>::dbg_vtophys(Addr addr)
|
|
{
|
|
return vtophys(xcProxy, addr);
|
|
}
|
|
#endif // FULL_SYSTEM
|
|
/*
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::processICacheCompletion()
|
|
{
|
|
switch (status()) {
|
|
case IcacheMiss:
|
|
DPRINTF(OzoneCPU, "OzoneCPU: Finished Icache miss.\n");
|
|
|
|
icacheStallCycles += curTick - lastIcacheStall;
|
|
_status = IcacheMissComplete;
|
|
cacheBlkValid = true;
|
|
// scheduleTickEvent(1);
|
|
break;
|
|
case SwitchedOut:
|
|
// If this CPU has been switched out due to sampling/warm-up,
|
|
// ignore any further status changes (e.g., due to cache
|
|
// misses outstanding at the time of the switch).
|
|
return;
|
|
default:
|
|
panic("OzoneCPU::processICacheCompletion: bad state");
|
|
break;
|
|
}
|
|
}
|
|
*/
|
|
#if FULL_SYSTEM
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::post_interrupt(int int_num, int index)
|
|
{
|
|
BaseCPU::post_interrupt(int_num, index);
|
|
|
|
// if (thread._status == ExecContext::Suspended) {
|
|
if (_status == Idle) {
|
|
DPRINTF(IPI,"Suspended Processor awoke\n");
|
|
// thread.activate();
|
|
// Hack for now. Otherwise might have to go through the xcProxy, or
|
|
// I need to figure out what's the right thing to call.
|
|
activateContext(thread.tid, 1);
|
|
}
|
|
}
|
|
#endif // FULL_SYSTEM
|
|
|
|
/* start simulation, program loaded, processor precise state initialized */
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::tick()
|
|
{
|
|
DPRINTF(OzoneCPU, "\n\nOzoneCPU: Ticking cpu.\n");
|
|
|
|
_status = Running;
|
|
thread.renameTable[ZeroReg]->setIntResult(0);
|
|
thread.renameTable[ZeroReg+TheISA::FP_Base_DepTag]->
|
|
setDoubleResult(0.0);
|
|
|
|
// General code flow:
|
|
// Check for any interrupts. Handle them if I do have one.
|
|
// Check if I have a need to fetch a new cache block. Either a bit could be
|
|
// set by functions indicating that I need to fetch a new block, or I could
|
|
// hang onto the last PC of the last cache block I fetched and compare the
|
|
// current PC to that. Setting a bit seems nicer but may be more error
|
|
// prone.
|
|
// Scan through the IQ to figure out if there's anything I can issue/execute
|
|
// Might need something close to the FU Pools to tell what instructions
|
|
// I can issue. How to handle loads and stores vs other insts?
|
|
// Extremely slow way: find first inst that can possibly issue; if it's a
|
|
// load or a store, then iterate through load/store queue.
|
|
// If I can't find instructions to execute and I've got room in the IQ
|
|
// (which is just a counter), then grab a few instructions out of the cache
|
|
// line buffer until I either run out or can execute up until my limit.
|
|
|
|
numCycles++;
|
|
|
|
traceData = NULL;
|
|
|
|
// Fault fault = NoFault;
|
|
|
|
#if 0 // FULL_SYSTEM
|
|
if (checkInterrupts && check_interrupts() && !inPalMode() &&
|
|
status() != IcacheMissComplete) {
|
|
int ipl = 0;
|
|
int summary = 0;
|
|
checkInterrupts = false;
|
|
|
|
if (readMiscReg(IPR_SIRR)) {
|
|
for (int i = INTLEVEL_SOFTWARE_MIN;
|
|
i < INTLEVEL_SOFTWARE_MAX; i++) {
|
|
if (readMiscReg(IPR_SIRR) & (ULL(1) << i)) {
|
|
// See table 4-19 of 21164 hardware reference
|
|
ipl = (i - INTLEVEL_SOFTWARE_MIN) + 1;
|
|
summary |= (ULL(1) << i);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Is this method so that if the interrupts are switched over from
|
|
// another CPU they'll still be handled?
|
|
// uint64_t interrupts = cpuXC->cpu->intr_status();
|
|
uint64_t interrupts = intr_status();
|
|
for (int i = INTLEVEL_EXTERNAL_MIN;
|
|
i < INTLEVEL_EXTERNAL_MAX; i++) {
|
|
if (interrupts & (ULL(1) << i)) {
|
|
// See table 4-19 of 21164 hardware reference
|
|
ipl = i;
|
|
summary |= (ULL(1) << i);
|
|
}
|
|
}
|
|
|
|
if (readMiscReg(IPR_ASTRR))
|
|
panic("asynchronous traps not implemented\n");
|
|
|
|
if (ipl && ipl > readMiscReg(IPR_IPLR)) {
|
|
setMiscReg(IPR_ISR, summary);
|
|
setMiscReg(IPR_INTID, ipl);
|
|
|
|
Fault(new InterruptFault)->invoke(xc);
|
|
|
|
DPRINTF(Flow, "Interrupt! IPLR=%d ipl=%d summary=%x\n",
|
|
readMiscReg(IPR_IPLR), ipl, summary);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
// Make call to ISA to ensure 0 register semantics...actually because the
|
|
// DynInsts will generally be the register file, this should only have to
|
|
// happen when the xc is actually written to (during a syscall or something)
|
|
// maintain $r0 semantics
|
|
// assert(renameTable[ZeroReg]->readIntResult() == 0);
|
|
#ifdef TARGET_ALPHA
|
|
// assert(renameTable[ZeroReg]->readDoubleResult() == 0);
|
|
#endif // TARGET_ALPHA
|
|
|
|
comm.advance();
|
|
frontEnd->tick();
|
|
backEnd->tick();
|
|
|
|
// Do this here? For now the front end will control the PC.
|
|
// PC = nextPC;
|
|
|
|
// check for instruction-count-based events
|
|
comInstEventQueue[0]->serviceEvents(numInst);
|
|
|
|
if (!tickEvent.scheduled() && _status == Running)
|
|
tickEvent.schedule(curTick + cycles(1));
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::squashFromXC()
|
|
{
|
|
thread.inSyscall = true;
|
|
backEnd->generateXCEvent();
|
|
}
|
|
|
|
#if !FULL_SYSTEM
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::syscall()
|
|
{
|
|
// Not sure this copy is needed, depending on how the XC proxy is made.
|
|
thread.renameTable.copyFrom(backEnd->renameTable);
|
|
|
|
thread.inSyscall = true;
|
|
|
|
thread.funcExeInst++;
|
|
|
|
DPRINTF(OzoneCPU, "FuncExeInst: %i\n", thread.funcExeInst);
|
|
|
|
thread.process->syscall(xcProxy);
|
|
|
|
thread.funcExeInst--;
|
|
|
|
thread.inSyscall = false;
|
|
|
|
frontEnd->renameTable.copyFrom(thread.renameTable);
|
|
backEnd->renameTable.copyFrom(thread.renameTable);
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::setSyscallReturn(SyscallReturn return_value, int tid)
|
|
{
|
|
// check for error condition. Alpha syscall convention is to
|
|
// indicate success/failure in reg a3 (r19) and put the
|
|
// return value itself in the standard return value reg (v0).
|
|
if (return_value.successful()) {
|
|
// no error
|
|
thread.renameTable[SyscallSuccessReg]->setIntResult(0);
|
|
thread.renameTable[ReturnValueReg]->setIntResult(return_value.value());
|
|
} else {
|
|
// got an error, return details
|
|
thread.renameTable[SyscallSuccessReg]->setIntResult((IntReg) -1);
|
|
thread.renameTable[ReturnValueReg]->setIntResult(-return_value.value());
|
|
}
|
|
}
|
|
#else
|
|
template <class Impl>
|
|
Fault
|
|
OzoneCPU<Impl>::hwrei()
|
|
{
|
|
// Need to move this to ISA code
|
|
// May also need to make this per thread
|
|
/*
|
|
if (!inPalMode())
|
|
return new UnimplementedOpcodeFault;
|
|
|
|
thread.setNextPC(thread.readMiscReg(AlphaISA::IPR_EXC_ADDR));
|
|
*/
|
|
lockFlag = false;
|
|
lockAddrList.clear();
|
|
kernelStats->hwrei();
|
|
|
|
checkInterrupts = true;
|
|
|
|
// FIXME: XXX check for interrupts? XXX
|
|
return NoFault;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::processInterrupts()
|
|
{
|
|
// Check for interrupts here. For now can copy the code that
|
|
// exists within isa_fullsys_traits.hh. Also assume that thread 0
|
|
// is the one that handles the interrupts.
|
|
|
|
// Check if there are any outstanding interrupts
|
|
//Handle the interrupts
|
|
int ipl = 0;
|
|
int summary = 0;
|
|
|
|
checkInterrupts = false;
|
|
|
|
if (thread.readMiscReg(IPR_ASTRR))
|
|
panic("asynchronous traps not implemented\n");
|
|
|
|
if (thread.readMiscReg(IPR_SIRR)) {
|
|
for (int i = INTLEVEL_SOFTWARE_MIN;
|
|
i < INTLEVEL_SOFTWARE_MAX; i++) {
|
|
if (thread.readMiscReg(IPR_SIRR) & (ULL(1) << i)) {
|
|
// See table 4-19 of the 21164 hardware reference
|
|
ipl = (i - INTLEVEL_SOFTWARE_MIN) + 1;
|
|
summary |= (ULL(1) << i);
|
|
}
|
|
}
|
|
}
|
|
|
|
uint64_t interrupts = intr_status();
|
|
|
|
if (interrupts) {
|
|
for (int i = INTLEVEL_EXTERNAL_MIN;
|
|
i < INTLEVEL_EXTERNAL_MAX; i++) {
|
|
if (interrupts & (ULL(1) << i)) {
|
|
// See table 4-19 of the 21164 hardware reference
|
|
ipl = i;
|
|
summary |= (ULL(1) << i);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ipl && ipl > thread.readMiscReg(IPR_IPLR)) {
|
|
thread.setMiscReg(IPR_ISR, summary);
|
|
thread.setMiscReg(IPR_INTID, ipl);
|
|
// @todo: Make this more transparent
|
|
if (checker) {
|
|
checkerXC->setMiscReg(IPR_ISR, summary);
|
|
checkerXC->setMiscReg(IPR_INTID, ipl);
|
|
}
|
|
Fault fault = new InterruptFault;
|
|
fault->invoke(thread.getXCProxy());
|
|
DPRINTF(Flow, "Interrupt! IPLR=%d ipl=%d summary=%x\n",
|
|
thread.readMiscReg(IPR_IPLR), ipl, summary);
|
|
}
|
|
}
|
|
|
|
template <class Impl>
|
|
bool
|
|
OzoneCPU<Impl>::simPalCheck(int palFunc)
|
|
{
|
|
// Need to move this to ISA code
|
|
// May also need to make this per thread
|
|
this->kernelStats->callpal(palFunc, xcProxy);
|
|
|
|
switch (palFunc) {
|
|
case PAL::halt:
|
|
haltContext(thread.tid);
|
|
if (--System::numSystemsRunning == 0)
|
|
new SimExitEvent("all cpus halted");
|
|
break;
|
|
|
|
case PAL::bpt:
|
|
case PAL::bugchk:
|
|
if (system->breakpoint())
|
|
return false;
|
|
break;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
#endif
|
|
|
|
template <class Impl>
|
|
BaseCPU *
|
|
OzoneCPU<Impl>::OzoneXC::getCpuPtr()
|
|
{
|
|
return cpu;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::setCpuId(int id)
|
|
{
|
|
cpu->cpuId = id;
|
|
thread->cpuId = id;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::setStatus(Status new_status)
|
|
{
|
|
// cpu->_status = new_status;
|
|
thread->_status = new_status;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::activate(int delay)
|
|
{
|
|
cpu->activateContext(thread->tid, delay);
|
|
}
|
|
|
|
/// Set the status to Suspended.
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::suspend()
|
|
{
|
|
cpu->suspendContext(thread->tid);
|
|
}
|
|
|
|
/// Set the status to Unallocated.
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::deallocate()
|
|
{
|
|
cpu->deallocateContext(thread->tid);
|
|
}
|
|
|
|
/// Set the status to Halted.
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::halt()
|
|
{
|
|
cpu->haltContext(thread->tid);
|
|
}
|
|
|
|
#if FULL_SYSTEM
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::dumpFuncProfile()
|
|
{ }
|
|
#endif
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::takeOverFrom(ExecContext *old_context)
|
|
{
|
|
// some things should already be set up
|
|
assert(getMemPtr() == old_context->getMemPtr());
|
|
#if FULL_SYSTEM
|
|
assert(getSystemPtr() == old_context->getSystemPtr());
|
|
#else
|
|
assert(getProcessPtr() == old_context->getProcessPtr());
|
|
#endif
|
|
|
|
// copy over functional state
|
|
setStatus(old_context->status());
|
|
copyArchRegs(old_context);
|
|
setCpuId(old_context->readCpuId());
|
|
#if !FULL_SYSTEM
|
|
setFuncExeInst(old_context->readFuncExeInst());
|
|
#endif
|
|
|
|
// storeCondFailures = 0;
|
|
cpu->lockFlag = false;
|
|
|
|
old_context->setStatus(ExecContext::Unallocated);
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::regStats(const std::string &name)
|
|
{ }
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::serialize(std::ostream &os)
|
|
{ }
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::unserialize(Checkpoint *cp, const std::string §ion)
|
|
{ }
|
|
|
|
#if FULL_SYSTEM
|
|
template <class Impl>
|
|
Event *
|
|
OzoneCPU<Impl>::OzoneXC::getQuiesceEvent()
|
|
{
|
|
return thread->quiesceEvent;
|
|
}
|
|
|
|
template <class Impl>
|
|
Tick
|
|
OzoneCPU<Impl>::OzoneXC::readLastActivate()
|
|
{
|
|
return thread->lastActivate;
|
|
}
|
|
|
|
template <class Impl>
|
|
Tick
|
|
OzoneCPU<Impl>::OzoneXC::readLastSuspend()
|
|
{
|
|
return thread->lastSuspend;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::profileClear()
|
|
{
|
|
if (thread->profile)
|
|
thread->profile->clear();
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::profileSample()
|
|
{
|
|
if (thread->profile)
|
|
thread->profile->sample(thread->profileNode, thread->profilePC);
|
|
}
|
|
#endif
|
|
|
|
template <class Impl>
|
|
int
|
|
OzoneCPU<Impl>::OzoneXC::getThreadNum()
|
|
{
|
|
return thread->tid;
|
|
}
|
|
|
|
// Also somewhat obnoxious. Really only used for the TLB fault.
|
|
template <class Impl>
|
|
TheISA::MachInst
|
|
OzoneCPU<Impl>::OzoneXC::getInst()
|
|
{
|
|
return thread->inst;
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::copyArchRegs(ExecContext *xc)
|
|
{
|
|
thread->PC = xc->readPC();
|
|
thread->nextPC = xc->readNextPC();
|
|
|
|
cpu->frontEnd->setPC(thread->PC);
|
|
cpu->frontEnd->setNextPC(thread->nextPC);
|
|
|
|
for (int i = 0; i < TheISA::TotalNumRegs; ++i) {
|
|
if (i < TheISA::FP_Base_DepTag) {
|
|
thread->renameTable[i]->setIntResult(xc->readIntReg(i));
|
|
} else if (i < (TheISA::FP_Base_DepTag + TheISA::NumFloatRegs)) {
|
|
int fp_idx = i - TheISA::FP_Base_DepTag;
|
|
thread->renameTable[i]->setDoubleResult(
|
|
xc->readFloatRegDouble(fp_idx));
|
|
}
|
|
}
|
|
|
|
#if !FULL_SYSTEM
|
|
thread->funcExeInst = xc->readFuncExeInst();
|
|
#endif
|
|
|
|
// Need to copy the XC values into the current rename table,
|
|
// copy the misc regs.
|
|
thread->regs.miscRegs.copyMiscRegs(xc);
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::clearArchRegs()
|
|
{
|
|
panic("Unimplemented!");
|
|
}
|
|
|
|
template <class Impl>
|
|
uint64_t
|
|
OzoneCPU<Impl>::OzoneXC::readIntReg(int reg_idx)
|
|
{
|
|
return thread->renameTable[reg_idx]->readIntResult();
|
|
}
|
|
|
|
template <class Impl>
|
|
float
|
|
OzoneCPU<Impl>::OzoneXC::readFloatRegSingle(int reg_idx)
|
|
{
|
|
int idx = reg_idx + TheISA::FP_Base_DepTag;
|
|
return thread->renameTable[idx]->readFloatResult();
|
|
}
|
|
|
|
template <class Impl>
|
|
double
|
|
OzoneCPU<Impl>::OzoneXC::readFloatRegDouble(int reg_idx)
|
|
{
|
|
int idx = reg_idx + TheISA::FP_Base_DepTag;
|
|
return thread->renameTable[idx]->readDoubleResult();
|
|
}
|
|
|
|
template <class Impl>
|
|
uint64_t
|
|
OzoneCPU<Impl>::OzoneXC::readFloatRegInt(int reg_idx)
|
|
{
|
|
int idx = reg_idx + TheISA::FP_Base_DepTag;
|
|
return thread->renameTable[idx]->readIntResult();
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::setIntReg(int reg_idx, uint64_t val)
|
|
{
|
|
thread->renameTable[reg_idx]->setIntResult(val);
|
|
|
|
if (!thread->inSyscall) {
|
|
cpu->squashFromXC();
|
|
}
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::setFloatRegSingle(int reg_idx, float val)
|
|
{
|
|
panic("Unimplemented!");
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::setFloatRegDouble(int reg_idx, double val)
|
|
{
|
|
int idx = reg_idx + TheISA::FP_Base_DepTag;
|
|
|
|
thread->renameTable[idx]->setDoubleResult(val);
|
|
|
|
if (!thread->inSyscall) {
|
|
cpu->squashFromXC();
|
|
}
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::setFloatRegInt(int reg_idx, uint64_t val)
|
|
{
|
|
panic("Unimplemented!");
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::setPC(Addr val)
|
|
{
|
|
thread->PC = val;
|
|
cpu->frontEnd->setPC(val);
|
|
|
|
if (!thread->inSyscall) {
|
|
cpu->squashFromXC();
|
|
}
|
|
}
|
|
|
|
template <class Impl>
|
|
void
|
|
OzoneCPU<Impl>::OzoneXC::setNextPC(Addr val)
|
|
{
|
|
thread->nextPC = val;
|
|
cpu->frontEnd->setNextPC(val);
|
|
|
|
if (!thread->inSyscall) {
|
|
cpu->squashFromXC();
|
|
}
|
|
}
|
|
|
|
template <class Impl>
|
|
TheISA::MiscReg
|
|
OzoneCPU<Impl>::OzoneXC::readMiscReg(int misc_reg)
|
|
{
|
|
return thread->regs.miscRegs.readReg(misc_reg);
|
|
}
|
|
|
|
template <class Impl>
|
|
TheISA::MiscReg
|
|
OzoneCPU<Impl>::OzoneXC::readMiscRegWithEffect(int misc_reg, Fault &fault)
|
|
{
|
|
return thread->regs.miscRegs.readRegWithEffect(misc_reg,
|
|
fault, this);
|
|
}
|
|
|
|
template <class Impl>
|
|
Fault
|
|
OzoneCPU<Impl>::OzoneXC::setMiscReg(int misc_reg, const MiscReg &val)
|
|
{
|
|
// Needs to setup a squash event unless we're in syscall mode
|
|
Fault ret_fault = thread->regs.miscRegs.setReg(misc_reg, val);
|
|
|
|
if (!thread->inSyscall) {
|
|
cpu->squashFromXC();
|
|
}
|
|
|
|
return ret_fault;
|
|
}
|
|
|
|
template <class Impl>
|
|
Fault
|
|
OzoneCPU<Impl>::OzoneXC::setMiscRegWithEffect(int misc_reg, const MiscReg &val)
|
|
{
|
|
// Needs to setup a squash event unless we're in syscall mode
|
|
Fault ret_fault = thread->regs.miscRegs.setRegWithEffect(misc_reg, val,
|
|
this);
|
|
|
|
if (!thread->inSyscall) {
|
|
cpu->squashFromXC();
|
|
}
|
|
|
|
return ret_fault;
|
|
}
|