gem5/base/traceflags.py
Steve Reinhardt d53c6c168a Get software prefetching to work in full-system mode.
Mostly a matter of keeping prefetches to invalid addrs
from messing up VM IPRs.  Also discovered that wh64s were
not being treated as prefetches, when they really should be
(for the most part, anyway).

arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
    - Get rid of intrlock flag for locking VM fault regs (a la EV5);
    instead, just don't update regs on VPTE loads (a la EV6).
    - Add NO_FAULT MemReq flag to indicate references that should not
    cause page faults (i.e., prefetches).
arch/alpha/ev5.cc:
    - Get rid of intrlock flag for locking VM fault regs (a la EV5);
    instead, just don't update regs on VPTE loads (a la EV6).
    - Add Fault trace flag.
arch/alpha/isa_desc:
    - Add NO_FAULT MemReq flag to indicate references that should not
    cause page faults (i.e., prefetches).
    - Mark wh64 as a "data prefetch" instruction so it gets controlled
    properly by the FullCPU data prefetch control switch.
    - Align wh64 EA in decoder so issue stage doesn't need to worry about it.
arch/alpha/isa_traits.hh:
    - Get rid of intrlock flag for locking VM fault regs (a la EV5);
    instead, just don't update regs on VPTE loads (a la EV6).
base/traceflags.py:
    - Add Fault trace flag.
cpu/simple_cpu/simple_cpu.hh:
    - Pass MemReq flags to writeHint() operation.
cpu/static_inst.hh:
    Update comment re: prefetches.

--HG--
extra : convert_revision : 62e466b0f4c0ff9961796270fa2e371ec24bcbb6
2004-06-15 10:48:08 -07:00

339 lines
9.8 KiB
Python

#!/usr/bin/env python
# Copyright (c) 2004 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# This file generates the header and source files for the flags
# that control the tracing facility.
#
hhfilename="traceflags.hh"
ccfilename="traceflags.cc"
#
# The list of trace flags that can be used to condition DPRINTFs etc.
# To define a new flag, simply add it to this list.
#
baseFlags = [
'TCPIP',
'Bus',
'ScsiDisk',
'ScsiCtrl',
'ScsiNone',
'DMA',
'DMAReadVerbose',
'DMAWriteVerbose',
'TLB',
'SimpleDisk',
'SimpleDiskData',
'Clock',
'Regs',
'MC146818',
'IPI',
'Timer',
'Mbox',
'PCIA',
'PCIDEV',
'ISP',
'BADADDR',
'Console',
'ConsolePoll',
'ConsoleVerbose',
'TlaserUart',
'AlphaConsole',
'Flow',
'Interrupt',
'Fault',
'Cycle',
'Loader',
'MMU',
'Ethernet',
'EthernetPIO',
'EthernetDMA',
'EthernetData',
'GDBMisc',
'GDBAcc',
'GDBRead',
'GDBWrite',
'GDBSend',
'GDBRecv',
'GDBExtra',
'VtoPhys',
'Printf',
'DebugPrintf',
'Serialize',
'Event',
'PCEvent',
'SyscallWarnings',
'SyscallVerbose',
'DiskImage',
'DiskImageRead',
'DiskImageWrite',
'InstExec',
'BPredRAS',
'Cache',
'IIC',
'IICMore',
'MSHR',
'Chains',
'Dispatch',
'Stats',
'StatEvents',
'Context',
'Config',
'Sampler',
'WriteBarrier'
]
#
# "Compound" flags correspond to a set of base flags. These exist
# solely for convenience in setting them via the command line: if a
# compound flag is specified, all of the corresponding base flags are
# set. Compound flags cannot be used directly in DPRINTFs etc.
# To define a new compound flag, add a new entry to this hash
# following the existing examples.
#
compoundFlagMap = {
'GDBAll' : [ 'GDBMisc', 'GDBAcc', 'GDBRead', 'GDBWrite', 'GDBSend', 'GDBRecv', 'GDBExtra' ],
'ScsiAll' : [ 'ScsiDisk', 'ScsiCtrl', 'ScsiNone' ],
'DiskImageAll' : [ 'DiskImage', 'DiskImageRead', 'DiskImageWrite' ],
'EthernetAll' : [ 'Ethernet', 'EthernetPIO', 'EthernetDMA', 'EthernetData' ]
}
#############################################################
#
# Everything below this point generates the appropriate C++
# declarations and definitions for the trace flags. If you are simply
# adding or modifying flag definitions, you should not have to change
# anything below.
#
import sys
# extract just the compound flag names into a list
compoundFlags = []
compoundFlags.extend(compoundFlagMap.keys())
compoundFlags.sort()
#
# First generate the header file. This defines the Flag enum
# and some extern declarations for the .cc file.
#
try:
hhfile = file(hhfilename, 'w')
except IOError, e:
sys.exit("can't open %s: %s" % (hhfilename, e))
# file header boilerplate
print >>hhfile, '''/* $Id $ */
/*
* Copyright (c) 2004
* The Regents of The University of Michigan
* All Rights Reserved
*
* This code is part of the M5 simulator, developed by Nathan Binkert,
* Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions
* from Ron Dreslinski, Dave Greene, and Lisa Hsu.
*
* Permission is granted to use, copy, create derivative works and
* redistribute this software and such derivative works for any
* purpose, so long as the copyright notice above, this grant of
* permission, and the disclaimer below appear in all copies made; and
* so long as the name of The University of Michigan is not used in
* any advertising or publicity pertaining to the use or distribution
* of this software without specific, written prior authorization.
*
* THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE
* UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND
* WITHOUT WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER
* EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE. THE REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE
* LIABLE FOR ANY DAMAGES, INCLUDING DIRECT, SPECIAL, INDIRECT,
* INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM
* ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN
* IF IT HAS BEEN OR IS HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGES.
*/
/*
* DO NOT EDIT THIS FILE!
*
* Automatically generated from traceflags.py
*/
#ifndef __BASE_TRACE_FLAGS_HH__
#define __BASE_TRACE_FLAGS_HH__
namespace Trace {
enum Flags {
''',
# Generate the enum. Base flags come first, then compound flags.
idx = 0
for flag in baseFlags:
print >>hhfile, ' %s = %d,' % (flag, idx)
idx += 1
numBaseFlags = idx
print >>hhfile, ' NumFlags = %d,' % idx
# put a comment in here to separate base from compound flags
print >>hhfile, '''
// The remaining enum values are *not* valid indices for Trace::flags.
// They are "compound" flags, which correspond to sets of base
// flags, and are used only by TraceParamContext::setFlags().
''',
for flag in compoundFlags:
print >>hhfile, ' %s = %d,' % (flag, idx)
idx += 1
numCompoundFlags = idx - numBaseFlags
print >>hhfile, ' NumCompoundFlags = %d' % numCompoundFlags
# trailer boilerplate
print >>hhfile, '''\
}; // enum Flags
// Array of strings for SimpleEnumParam
extern const char *flagStrings[];
extern const int numFlagStrings;
// Array of arraay pointers: for each compound flag, gives the list of
// base flags to set. Inidividual flag arrays are terminated by -1.
extern const Flags *compoundFlags[];
/* namespace Trace */ }
#endif // __BASE_TRACE_FLAGS_HH__
''',
hhfile.close()
#
#
# Print out .cc file with array definitions.
#
#
try:
ccfile = file(ccfilename, 'w')
except OSError, e:
sys.exit("can't open %s: %s" % (ccfilename, e))
# file header
print >>ccfile, '''\
/* $Id $ */
/*
* Copyright (c) 2004
* The Regents of The University of Michigan
* All Rights Reserved
*
* This code is part of the M5 simulator, developed by Nathan Binkert,
* Erik Hallnor, Steve Raasch, and Steve Reinhardt, with contributions
* from Ron Dreslinski, Dave Greene, and Lisa Hsu.
*
* Permission is granted to use, copy, create derivative works and
* redistribute this software and such derivative works for any
* purpose, so long as the copyright notice above, this grant of
* permission, and the disclaimer below appear in all copies made; and
* so long as the name of The University of Michigan is not used in
* any advertising or publicity pertaining to the use or distribution
* of this software without specific, written prior authorization.
*
* THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE
* UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY PURPOSE, AND
* WITHOUT WARRANTY BY THE UNIVERSITY OF MICHIGAN OF ANY KIND, EITHER
* EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE. THE REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE
* LIABLE FOR ANY DAMAGES, INCLUDING DIRECT, SPECIAL, INDIRECT,
* INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM
* ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN
* IF IT HAS BEEN OR IS HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGES.
*/
/*
* DO NOT EDIT THIS FILE!
*
* Automatically generated from traceflags.pl.
*/
#include "base/traceflags.hh"
using namespace Trace;
const char *Trace::flagStrings[] =
{
''',
# The string array is used by SimpleEnumParam to map the strings
# provided by the user to enum values.
for flag in baseFlags:
print >>ccfile, ' "%s",' % flag
for flag in compoundFlags:
print >>ccfile, ' "%s",' % flag
print >>ccfile, '};\n'
numFlagStrings = len(baseFlags) + len(compoundFlags);
print >>ccfile, 'const int Trace::numFlagStrings = %d;' % numFlagStrings
print >>ccfile
#
# Now define the individual compound flag arrays. There is an array
# for each compound flag listing the component base flags.
#
for flag in compoundFlags:
flags = compoundFlagMap[flag]
flags.append('(Flags)-1')
print >>ccfile, 'static const Flags %sMap[] =' % flag
print >>ccfile, '{ %s };' % (', '.join(flags))
print >>ccfile
#
# Finally the compoundFlags[] array maps the compound flags
# to their individual arrays/
#
print >>ccfile, 'const Flags *Trace::compoundFlags[] ='
print >>ccfile, '{'
for flag in compoundFlags:
print >>ccfile, ' %sMap,' % flag
# file trailer
print >>ccfile, '};'
ccfile.close()