gem5/tests/quick/fs/10.linux-boot/ref/arm/linux/realview-simple-timing/system.terminal
2012-05-10 18:04:29 -05:00

96 lines
5.7 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011
[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: ARM-RealView PBX
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] DMA zone: 256 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768
[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 125408k/125408k available, 5664k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB)
[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:128
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000168] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
[ 0.000223] pid_max: default: 32768 minimum: 301
[ 0.000427] Mount-cache hash table entries: 512
[ 0.000749] CPU: Testing write buffer coherency: ok
[ 0.001004] Brought up 1 CPUs
[ 0.001027] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
[ 0.001188] devtmpfs: initialized
[ 0.002576] NET: Registered protocol family 16
[ 0.003736] Serial: AMBA PL011 UART driver
[ 0.003799] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
[ 0.003847] console [ttyAMA0] enabled, bootconsole disabled
[ 0.003847] console [ttyAMA0] enabled, bootconsole disabled
[ 0.008051] bio: create slab <bio-0> at 0
[ 0.008728] SCSI subsystem initialized
[ 0.008956] libata version 3.00 loaded.
[ 0.009494] Switching to clocksource timer3
[ 0.017073] NET: Registered protocol family 2
[ 0.017178] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.017421] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.017555] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.017680] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.017710] TCP reno registered
[ 0.017729] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.017780] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.017990] NET: Registered protocol family 1
[ 0.019019] msgmni has been set to 244
[ 0.019053] io scheduler noop registered (default)
[ 0.021325] CLCD: RealView hardware, XVGA display
[ 0.077800] Console: switching to colour frame buffer device 128x48
[ 0.111168] brd: module loaded
[ 0.113636] loop: module loaded
[ 0.114723] scsi0 : pata_platform
[ 0.114971] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
[ 0.115596] slram: not enough parameters.
[ 0.116179] mousedev: PS/2 mouse device common for all mice
[ 0.116499] TCP cubic registered
[ 0.116518] NET: Registered protocol family 17
[ 0.116547] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
[ 0.270184] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
[ 0.270211] ata1.00: 1048320 sectors, multi 0: LBA
[ 0.270240] ata1.00: configured for PIO
[ 0.270435] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
[ 0.270894] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
[ 0.271042] sd 0:0:0:0: [sda] Write Protect is off
[ 0.271069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.271142] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 0.272256] sda: sda1
[ 0.272427] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.272843] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.710289] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
[ 2.310249] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
[ 2.331079] VFS: Mounted root (ext2 filesystem) on device 8:1.
[ 2.331510] devtmpfs: mounted
[ 2.331559] Freeing init memory: 132K
init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
starting pid 331, tty '': '/etc/rc.d/rc.local'
warning: can't open /etc/mtab: No such file or directory
Thu Jan 1 00:00:02 UTC 1970
S: devpts
Thu Jan 1 00:00:02 UTC 1970