gem5/configs/dram/lat_mem_rd.py
Andreas Hansson 48d07b3fa3 configs: Add a lat_mem_rd style test script
This patch adds a config script that broadly replicates the behaviour
of lat_mem_rd. The test is based on traffic generators, and as such we
simply randomise addresses in increasingly large ranges, and play them
back using the trace functionality of the traffic generator.

The test script is accompanied by a post-processing and visualisation
script. At the moment no configurability is added to tweak the memory
hierarchy, but a follow on patch could easily extend the
functionality.
2016-03-08 17:51:02 -05:00

305 lines
10 KiB
Python

# Copyright (c) 2015 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Andreas Hansson
import gzip
import optparse
import os
import m5
from m5.objects import *
from m5.util import addToPath
from m5.internal.stats import periodicStatDump
addToPath('../common')
import MemConfig
addToPath('../../util')
import protolib
# this script is helpful to observe the memory latency for various
# levels in a cache hierarchy, and various cache and memory
# configurations, in essence replicating the lmbench lat_mem_rd thrash
# behaviour
# import the packet proto definitions, and if they are not found,
# attempt to generate them automatically
try:
import packet_pb2
except:
print "Did not find packet proto definitions, attempting to generate"
from subprocess import call
error = call(['protoc', '--python_out=configs/dram',
'--proto_path=src/proto', 'src/proto/packet.proto'])
if not error:
print "Generated packet proto definitions"
try:
import google.protobuf
except:
print "Please install the Python protobuf module"
exit(-1)
import packet_pb2
else:
print "Failed to import packet proto definitions"
exit(-1)
parser = optparse.OptionParser()
parser.add_option("--mem-type", type="choice", default="DDR3_1600_x64",
choices=MemConfig.mem_names(),
help = "type of memory to use")
parser.add_option("--mem-size", action="store", type="string",
default="16MB",
help="Specify the memory size")
parser.add_option("--reuse-trace", action="store_true",
help="Prevent generation of traces and reuse existing")
(options, args) = parser.parse_args()
if args:
print "Error: script doesn't take any positional arguments"
sys.exit(1)
# start by creating the system itself, using a multi-layer 2.0 GHz
# crossbar, delivering 64 bytes / 3 cycles (one header cycle) which
# amounts to 42.7 GByte/s per layer and thus per port
system = System(membus = SystemXBar(width = 32))
system.clk_domain = SrcClockDomain(clock = '2.0GHz',
voltage_domain =
VoltageDomain(voltage = '1V'))
mem_range = AddrRange(options.mem_size)
system.mem_ranges = [mem_range]
# do not worry about reserving space for the backing store
system.mmap_using_noreserve = True
# currently not exposed as command-line options, set here for now
options.mem_channels = 1
options.mem_ranks = 1
options.external_memory_system = 0
options.tlm_memory = 0
options.elastic_trace_en = 0
MemConfig.config_mem(options, system)
# there is no point slowing things down by saving any data
for ctrl in system.mem_ctrls:
ctrl.null = True
# the following assumes that we are using the native DRAM
# controller, check to be sure
if isinstance(ctrl, m5.objects.DRAMCtrl):
# make the DRAM refresh interval sufficiently infinite to avoid
# latency spikes
ctrl.tREFI = '100s'
# use the same concept as the utilisation sweep, and print the config
# so that we can later read it in
cfg_file_name = os.path.join(m5.options.outdir, "lat_mem_rd.cfg")
cfg_file = open(cfg_file_name, 'w')
# set an appropriate burst length in bytes
burst_size = 64
system.cache_line_size = burst_size
# lazy version to check if an integer is a power of two
def is_pow2(num):
return num != 0 and ((num & (num - 1)) == 0)
# assume we start every range at 0
max_range = int(mem_range.end)
# start at a size of 4 kByte, and go up till we hit the max, increase
# the step every time we hit a power of two
min_range = 4096
ranges = [min_range]
step = 1024
while ranges[-1] < max_range:
new_range = ranges[-1] + step
if is_pow2(new_range):
step *= 2
ranges.append(new_range)
# how many times to repeat the measurement for each data point
iterations = 2
# 150 ns in ticks, this is choosen to be high enough that transactions
# do not pile up in the system, adjust if needed
itt = 150 * 1000
# for every data point, we create a trace containing a random address
# sequence, so that we can play back the same sequence for warming and
# the actual measurement
def create_trace(filename, max_addr, burst_size, itt):
try:
proto_out = gzip.open(filename, 'wb')
except IOError:
print "Failed to open ", filename, " for writing"
exit(-1)
# write the magic number in 4-byte Little Endian, similar to what
# is done in src/proto/protoio.cc
proto_out.write("gem5")
# add the packet header
header = packet_pb2.PacketHeader()
header.obj_id = "lat_mem_rd for range 0:" + str(max_addr)
# assume the default tick rate (1 ps)
header.tick_freq = 1000000000000
protolib.encodeMessage(proto_out, header)
# create a list of every single address to touch
addrs = range(0, max_addr, burst_size)
import random
random.shuffle(addrs)
tick = 0
# create a packet we can re-use for all the addresses
packet = packet_pb2.Packet()
# ReadReq is 1 in src/mem/packet.hh Command enum
packet.cmd = 1
packet.size = int(burst_size)
for addr in addrs:
packet.tick = long(tick)
packet.addr = long(addr)
protolib.encodeMessage(proto_out, packet)
tick = tick + itt
proto_out.close()
# this will take a while, so keep the user informed
print "Generating traces, please wait..."
nxt_range = 0
nxt_state = 0
period = long(itt * (max_range / burst_size))
# now we create the states for each range
for r in ranges:
filename = os.path.join(m5.options.outdir,
'lat_mem_rd%d.trc.gz' % nxt_range)
if not options.reuse_trace:
# create the actual random trace for this range
create_trace(filename, r, burst_size, itt)
# the warming state
cfg_file.write("STATE %d %d TRACE %s 0\n" %
(nxt_state, period, filename))
nxt_state = nxt_state + 1
# the measuring states
for i in range(iterations):
cfg_file.write("STATE %d %d TRACE %s 0\n" %
(nxt_state, period, filename))
nxt_state = nxt_state + 1
nxt_range = nxt_range + 1
cfg_file.write("INIT 0\n")
# go through the states one by one
for state in range(1, nxt_state):
cfg_file.write("TRANSITION %d %d 1\n" % (state - 1, state))
cfg_file.write("TRANSITION %d %d 1\n" % (nxt_state - 1, nxt_state - 1))
cfg_file.close()
# create a traffic generator, and point it to the file we just created
system.tgen = TrafficGen(config_file = cfg_file_name)
# add a communication monitor
system.monitor = CommMonitor()
# connect the traffic generator to the system
system.tgen.port = system.monitor.slave
# create the actual cache hierarchy, for now just go with something
# basic to explore some of the options
from Caches import *
# a starting point for an L3 cache
class L3Cache(Cache):
assoc = 16
hit_latency = 40
response_latency = 40
mshrs = 32
tgts_per_mshr = 12
write_buffers = 16
# note that everything is in the same clock domain, 2.0 GHz as
# specified above
system.l1cache = L1_DCache(size = '64kB')
system.monitor.master = system.l1cache.cpu_side
system.l2cache = L2Cache(size = '512kB', writeback_clean = True)
system.l2cache.xbar = L2XBar()
system.l1cache.mem_side = system.l2cache.xbar.slave
system.l2cache.cpu_side = system.l2cache.xbar.master
# make the L3 mostly exclusive, and correspondingly ensure that the L2
# writes back also clean lines to the L3
system.l3cache = L3Cache(size = '4MB', clusivity = 'mostly_excl')
system.l3cache.xbar = L2XBar()
system.l2cache.mem_side = system.l3cache.xbar.slave
system.l3cache.cpu_side = system.l3cache.xbar.master
system.l3cache.mem_side = system.membus.slave
# connect the system port even if it is not used in this example
system.system_port = system.membus.slave
# every period, dump and reset all stats
periodicStatDump(period)
# run Forrest, run!
root = Root(full_system = False, system = system)
root.system.mem_mode = 'timing'
m5.instantiate()
m5.simulate(nxt_state * period)
# print all we need to make sense of the stats output
print "lat_mem_rd with %d iterations, ranges:" % iterations
for r in ranges:
print r