e7e17f92db
This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
248 lines
9.5 KiB
Python
248 lines
9.5 KiB
Python
# Copyright (c) 2010-2013 ARM Limited
|
|
# All rights reserved.
|
|
#
|
|
# The license below extends only to copyright in the software and shall
|
|
# not be construed as granting a license to any other intellectual
|
|
# property including but not limited to intellectual property relating
|
|
# to a hardware implementation of the functionality of the software
|
|
# licensed hereunder. You may use the software subject to the license
|
|
# terms below provided that you ensure that this notice is replicated
|
|
# unmodified and in its entirety in all distributions of the software,
|
|
# modified or unmodified, in source code or in binary form.
|
|
#
|
|
# Copyright (c) 2006-2007 The Regents of The University of Michigan
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions are
|
|
# met: redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer;
|
|
# redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution;
|
|
# neither the name of the copyright holders nor the names of its
|
|
# contributors may be used to endorse or promote products derived from
|
|
# this software without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
# Authors: Ali Saidi
|
|
|
|
import optparse
|
|
import sys
|
|
|
|
import m5
|
|
from m5.defines import buildEnv
|
|
from m5.objects import *
|
|
from m5.util import addToPath, fatal
|
|
|
|
addToPath('../common')
|
|
|
|
from FSConfig import *
|
|
from SysPaths import *
|
|
from Benchmarks import *
|
|
import Simulation
|
|
import CacheConfig
|
|
from Caches import *
|
|
import Options
|
|
|
|
parser = optparse.OptionParser()
|
|
Options.addCommonOptions(parser)
|
|
Options.addFSOptions(parser)
|
|
|
|
(options, args) = parser.parse_args()
|
|
|
|
if args:
|
|
print "Error: script doesn't take any positional arguments"
|
|
sys.exit(1)
|
|
|
|
# driver system CPU is always simple... note this is an assignment of
|
|
# a class, not an instance.
|
|
DriveCPUClass = AtomicSimpleCPU
|
|
drive_mem_mode = 'atomic'
|
|
|
|
# Check if KVM support has been enabled, we might need to do VM
|
|
# configuration if that's the case.
|
|
have_kvm_support = 'BaseKvmCPU' in globals()
|
|
def is_kvm_cpu(cpu_class):
|
|
return have_kvm_support and cpu_class != None and \
|
|
issubclass(cpu_class, BaseKvmCPU)
|
|
|
|
# system under test can be any CPU
|
|
(TestCPUClass, test_mem_mode, FutureClass) = Simulation.setCPUClass(options)
|
|
|
|
# Match the memories with the CPUs, the driver system always simple,
|
|
# and based on the options for the test system
|
|
DriveMemClass = SimpleMemory
|
|
TestMemClass = Simulation.setMemClass(options)
|
|
|
|
if options.benchmark:
|
|
try:
|
|
bm = Benchmarks[options.benchmark]
|
|
except KeyError:
|
|
print "Error benchmark %s has not been defined." % options.benchmark
|
|
print "Valid benchmarks are: %s" % DefinedBenchmarks
|
|
sys.exit(1)
|
|
else:
|
|
if options.dual:
|
|
bm = [SysConfig(disk=options.disk_image, mem=options.mem_size), SysConfig(disk=options.disk_image, mem=options.mem_size)]
|
|
else:
|
|
bm = [SysConfig(disk=options.disk_image, mem=options.mem_size)]
|
|
|
|
np = options.num_cpus
|
|
|
|
if buildEnv['TARGET_ISA'] == "alpha":
|
|
test_sys = makeLinuxAlphaSystem(test_mem_mode, bm[0])
|
|
elif buildEnv['TARGET_ISA'] == "mips":
|
|
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0])
|
|
elif buildEnv['TARGET_ISA'] == "sparc":
|
|
test_sys = makeSparcSystem(test_mem_mode, bm[0])
|
|
elif buildEnv['TARGET_ISA'] == "x86":
|
|
test_sys = makeLinuxX86System(test_mem_mode, options.num_cpus, bm[0])
|
|
elif buildEnv['TARGET_ISA'] == "arm":
|
|
test_sys = makeArmSystem(test_mem_mode, options.machine_type, bm[0],
|
|
options.dtb_filename,
|
|
bare_metal=options.bare_metal)
|
|
else:
|
|
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
|
|
|
|
# Create a top-level voltage domain
|
|
test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
|
|
|
|
# Create a source clock for the system and set the clock period
|
|
test_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
|
|
voltage_domain = test_sys.voltage_domain)
|
|
|
|
# Create a CPU voltage domain
|
|
test_sys.cpu_voltage_domain = VoltageDomain()
|
|
|
|
# Create a source clock for the CPUs and set the clock period
|
|
test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
|
|
voltage_domain =
|
|
test_sys.cpu_voltage_domain)
|
|
|
|
if options.kernel is not None:
|
|
test_sys.kernel = binary(options.kernel)
|
|
|
|
if options.script is not None:
|
|
test_sys.readfile = options.script
|
|
|
|
test_sys.init_param = options.init_param
|
|
|
|
# For now, assign all the CPUs to the same clock domain
|
|
test_sys.cpu = [TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
|
|
for i in xrange(np)]
|
|
|
|
if is_kvm_cpu(TestCPUClass) or is_kvm_cpu(FutureClass):
|
|
test_sys.vm = KvmVM()
|
|
|
|
if options.caches or options.l2cache:
|
|
# By default the IOCache runs at the system clock
|
|
test_sys.iocache = IOCache(addr_ranges = test_sys.mem_ranges)
|
|
test_sys.iocache.cpu_side = test_sys.iobus.master
|
|
test_sys.iocache.mem_side = test_sys.membus.slave
|
|
else:
|
|
test_sys.iobridge = Bridge(delay='50ns', ranges = test_sys.mem_ranges)
|
|
test_sys.iobridge.slave = test_sys.iobus.master
|
|
test_sys.iobridge.master = test_sys.membus.slave
|
|
|
|
# Sanity check
|
|
if options.fastmem:
|
|
if TestCPUClass != AtomicSimpleCPU:
|
|
fatal("Fastmem can only be used with atomic CPU!")
|
|
if (options.caches or options.l2cache):
|
|
fatal("You cannot use fastmem in combination with caches!")
|
|
|
|
for i in xrange(np):
|
|
if options.fastmem:
|
|
test_sys.cpu[i].fastmem = True
|
|
if options.checker:
|
|
test_sys.cpu[i].addCheckerCpu()
|
|
test_sys.cpu[i].createThreads()
|
|
|
|
CacheConfig.config_cache(options, test_sys)
|
|
|
|
# Create the appropriate memory controllers and connect them to the
|
|
# memory bus
|
|
test_sys.mem_ctrls = [TestMemClass(range = r, conf_table_reported = True)
|
|
for r in test_sys.mem_ranges]
|
|
for i in xrange(len(test_sys.mem_ctrls)):
|
|
test_sys.mem_ctrls[i].port = test_sys.membus.master
|
|
|
|
if len(bm) == 2:
|
|
if buildEnv['TARGET_ISA'] == 'alpha':
|
|
drive_sys = makeLinuxAlphaSystem(drive_mem_mode, bm[1])
|
|
elif buildEnv['TARGET_ISA'] == 'mips':
|
|
drive_sys = makeLinuxMipsSystem(drive_mem_mode, bm[1])
|
|
elif buildEnv['TARGET_ISA'] == 'sparc':
|
|
drive_sys = makeSparcSystem(drive_mem_mode, bm[1])
|
|
elif buildEnv['TARGET_ISA'] == 'x86':
|
|
drive_sys = makeX86System(drive_mem_mode, np, bm[1])
|
|
elif buildEnv['TARGET_ISA'] == 'arm':
|
|
drive_sys = makeArmSystem(drive_mem_mode, options.machine_type, bm[1])
|
|
|
|
# Create a top-level voltage domain
|
|
drive_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
|
|
|
|
# Create a source clock for the system and set the clock period
|
|
drive_sys.clk_domain = SrcClockDomain(clock = options.sys_clock)
|
|
|
|
# Create a CPU voltage domain
|
|
drive_sys.cpu_voltage_domain = VoltageDomain()
|
|
|
|
# Create a source clock for the CPUs and set the clock period
|
|
drive_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
|
|
voltage_domain =
|
|
drive_sys.cpu_voltage_domain)
|
|
|
|
drive_sys.cpu = DriveCPUClass(clk_domain=drive_sys.cpu_clk_domain,
|
|
cpu_id=0)
|
|
drive_sys.cpu.createThreads()
|
|
drive_sys.cpu.createInterruptController()
|
|
drive_sys.cpu.connectAllPorts(drive_sys.membus)
|
|
if options.fastmem:
|
|
drive_sys.cpu.fastmem = True
|
|
if options.kernel is not None:
|
|
drive_sys.kernel = binary(options.kernel)
|
|
|
|
if is_kvm_cpu(DriveCPUClass):
|
|
drive_sys.vm = KvmVM()
|
|
|
|
drive_sys.iobridge = Bridge(delay='50ns',
|
|
ranges = drive_sys.mem_ranges)
|
|
drive_sys.iobridge.slave = drive_sys.iobus.master
|
|
drive_sys.iobridge.master = drive_sys.membus.slave
|
|
|
|
# Create the appropriate memory controllers and connect them to the
|
|
# memory bus
|
|
drive_sys.mem_ctrls = [DriveMemClass(range = r, conf_table_reported = True)
|
|
for r in drive_sys.mem_ranges]
|
|
for i in xrange(len(drive_sys.mem_ctrls)):
|
|
drive_sys.mem_ctrls[i].port = drive_sys.membus.master
|
|
|
|
drive_sys.init_param = options.init_param
|
|
root = makeDualRoot(True, test_sys, drive_sys, options.etherdump)
|
|
elif len(bm) == 1:
|
|
root = Root(full_system=True, system=test_sys)
|
|
else:
|
|
print "Error I don't know how to create more than 2 systems."
|
|
sys.exit(1)
|
|
|
|
if options.timesync:
|
|
root.time_sync_enable = True
|
|
|
|
if options.frame_capture:
|
|
VncServer.frame_capture = True
|
|
|
|
Simulation.setWorkCountOptions(test_sys, options)
|
|
Simulation.run(options, root, test_sys, FutureClass)
|