gem5/tests/quick/10.linux-boot/ref/arm/linux/realview-simple-atomic/system.terminal

66 lines
3.8 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

[ 0.000000] Linux version 2.6.34-sysexplore (root@harpertown2) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-161) ) #10 Thu Sep 30 18:33:08 CDT 2010
[ 0.000000] CPU: ARMv7 Processor [350ff000] revision 0 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: ARM-RealView PBX
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] DMA zone: 256 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: earlyprintk mem=128MB console=ttyAMA0 lpj=19988480 norandmaps slram=slram0,0x8000000,+0x8000000 mtdparts=slram0:- rw loglevel=8 root=/dev/mtdblock0
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 126868k/126868k available, 4204k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0019000 ( 68 kB)
[ 0.000000] .text : 0xc0019000 - 0xc01c6000 (1716 kB)
[ 0.000000] .data : 0xc01d2000 - 0xc01e47c0 ( 74 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 80x30
[ 33.915578] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
[ 45.426157] Mount-cache hash table entries: 512
[ 143.286814] CPU: Testing write buffer coherency: ok
[ 29.252400] PL310/L2C-310 cache controller enabled (ffffffff)
[ 126.104985] Serial: AMBA PL011 UART driver
[ 177.774480] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a AMBA/PL011
[ 21.726361] console [ttyAMA0] enabled
[ 81.629884] bio: create slab <bio-0> at 0
[ 12.174104] Switching to clocksource timer3
[ 144.431534] msgmni has been set to 247
[ 138.139394] io scheduler noop registered (default)
[ 108.353676] brd: module loaded
[ 49.777728] loop: module loaded
[ 173.614453] slram: devname = slram0
[ 3.234578] slram: devstart = 0x8000000
[ 96.743592] slram: devlength = +0x8000000
[ 12.069064] slram: devname=slram0, devstart=0x8000000, devlength=0x8000000
[ 108.439678] slram: Registered device slram0 from 131072KiB to 262144KiB
[ 40.894106] slram: Mapped from 0xc9000000 to 0xd1000000
[ 128.939931] mice: PS/2 mouse device common for all mice
[ 99.023569] oprofile: using arm/armv7
[ 166.353391] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
[ 64.811117] VFS: Mounted root (ext2 filesystem) on device 31:0.
[ 151.993925] Freeing init memory: 68K
init started: BusyBox v1.15.3 (2010-03-26 09:38:05 GMT)
starting pid 251, tty '': '/etc/rc.d/rc.local'
/etc/rc.d/rc.local: line 13: can't create /var/log/boot.log: nonexistent directory
warning: can't open /etc/mtab: No such file or directory
rootfs on / type rootfs (rw)
/dev/root on / type ext2 (rw,relatime,errors=continue)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
none on /tmp type tmpfs (rw,relatime)
none on /dev type tmpfs (rw,relatime)
Mounting filesystems...
S: devpts