sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/system/alpha/palcode/platform_tlaser.S
Ali Saidi d60a6c86c5 removed tlaserreg.h, rewrote necessary parts 
deleted simos.h
deleted tlaserreg.h

palcode/platform_m5.S:
palcode/platform_tlaser.S:
    removed tlaserreg.h, rewrote necessary parts
2005-01-30 16:50:55 -05:00

2819 lines
84 KiB
ArmAsm
Raw Blame History

// build_fixed_image: not sure what means
// real_mm to be replaced during rewrite
// remove_save_state remove_restore_state can be remooved to save space ??
#define egore 0
#define acore 0
#define beh_model 0
#define ev5_p2 1
#define ev5_p1 0
#define ldvpte_bug_fix 1
#define spe_fix 0
#define osf_chm_fix 0
#define build_fixed_image 0
#define enable_p4_fixups 0
#define osf_svmin 1
#define enable_physical_console 0
#define fill_err_hack 0
#define icflush_on_tbix 0
#define max_cpuid 1
#define perfmon_debug 0
#define rax_mode 0
#define hw_rei_spe hw_rei
#include "ev5_defs.h"
#include "ev5_impure.h"
#include "ev5_alpha_defs.h"
#include "ev5_paldef.h"
#include "ev5_osfalpha_defs.h"
#include "fromHudsonMacros.h"
#include "fromHudsonOsf.h"
#include "dc21164FromGasSources.h"
#include "cserve.h"
#include "tlaser.h"
#define ldlp ldl_p
#define ldqp ldq_p
#define stlp stl_p
#define stqp stq_p
#define stqpc stqp
#ifdef SIMOS
#define ldqpl ldq_p
#define sdqpl sdq_p
#else
<--bomb>
#endif
#define pt_entInt pt_entint
#define pt_entArith pt_entarith
#define mchk_size ((mchk_cpu_base + 7 + 8) &0xfff8)
#define mchk_flag CNS_Q_FLAG
#define mchk_sys_base 56
#define mchk_cpu_base (CNS_Q_LD_LOCK + 8)
#define mchk_offsets CNS_Q_EXC_ADDR
#define mchk_mchk_code 8
#define mchk_ic_perr_stat CNS_Q_ICPERR_STAT
#define mchk_dc_perr_stat CNS_Q_DCPERR_STAT
#define mchk_sc_addr CNS_Q_SC_ADDR
#define mchk_sc_stat CNS_Q_SC_STAT
#define mchk_ei_addr CNS_Q_EI_ADDR
#define mchk_bc_tag_addr CNS_Q_BC_TAG_ADDR
#define mchk_fill_syn CNS_Q_FILL_SYN
#define mchk_ei_stat CNS_Q_EI_STAT
#define mchk_exc_addr CNS_Q_EXC_ADDR
#define mchk_ld_lock CNS_Q_LD_LOCK
#define osfpcb_q_Ksp pcb_q_ksp
#define pal_impure_common_size ((0x200 + 7) & 0xfff8)
#define ALIGN_BLOCK \
.align 5
#define ALIGN_BRANCH \
.align 3
#define EXPORT(_x) \
.align 5; \
.globl _x; \
_x:
// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
// XXX the following is 'made up'
// XXX bugnion
// XXX bugnion not sure how to align 'quad'
#define ALIGN_QUAD \
.align 3
#define ALIGN_128 \
.align 7
#define GET_IMPURE(_r) mfpr _r,pt_impure
#define GET_ADDR(_r1,_off,_r2) lda _r1,_off(_r2)
#define BIT(_x) (1<<(_x))
// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
// XXX back to original code
// .sbttl "System specific code - beh model version"
//
// Entry points
// SYS$CFLUSH - Cache flush
// SYS$CSERVE - Console service
// SYS$WRIPIR - interprocessor interrupts
// SYS$HALT_INTERRUPT - Halt interrupt
// SYS$PASSIVE_RELEASE - Interrupt, passive release
// SYS$INTERRUPT - Interrupt
// SYS$RESET - Reset
// SYS$ENTER_CONSOLE
//
// Macro to read TLINTRSUMx
//
// Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register
//
// Assumed register usage:
// rsum TLINTRSUMx contents
// raddr node space address
// scratch scratch register
// .macro Read_TLINTRSUMx rsum, raddr, scratch, ?label1, ?label2
//
// nop
// mfpr 'scratch', pt_whami // Get our whami (VID)
//
// extbl 'scratch', #1, 'scratch' // shift down to bit 0
// lda 'raddr', ^xff88(r31) // Get base node space address bits
//
// sll 'raddr', #24, 'raddr' // Shift up to proper position
// srl 'scratch', #1, 'rsum' // Shift off the cpu number
//
// sll 'rsum', #22, 'rsum' // Get our node offset
// addq 'raddr', 'rsum', 'raddr' // Get our base node space address
//
// blbs 'scratch', label1
// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
//
// br r31, label2
//label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
//
//label2: ldlp 'rsum', 0('raddr') // read the right tlintrsum reg
//.endm
#define Read_TLINTRSUMx(_rsum,_raddr,_scratch) \
nop; \
mfpr _scratch,pt_whami; \
extbl _scratch,1,_scratch; \
lda _raddr,0xff88(zero); \
sll _raddr,24,_raddr; \
srl _scratch,1,_rsum; \
sll _rsum,22,_rsum; \
addq _raddr,_rsum,_raddr; \
blbs _scratch,1f; \
lda _raddr,0x1180(_raddr); \
br r31,2f; \
1: \
lda _raddr,0x11c0(_raddr); \
2: ldlp _rsum,0(_raddr)
//
// Macro to write TLINTRSUMx
//
// Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register
//
// Assumed register usage:
// rsum TLINTRSUMx write data
// raddr node space address
// scratch scratch register
// .macro Write_TLINTRSUMx rsum, raddr, whami, ?label1, ?label2
//
// nop
// mfpr 'whami', pt_whami // Get our whami (VID)
//
// extbl 'whami', #1, 'whami' // shift down to bit 0
// lda 'raddr', ^xff88(r31) // Get base node space address bits
//
// sll 'raddr', #24, 'raddr' // Shift up to proper position
// blbs 'whami', label1
//
// lda 'raddr', <tlep$tlintrsum0_offset>('raddr')
// br r31, label2
//
// label1: lda 'raddr', <tlep$tlintrsum1_offset>('raddr')
// label2: srl 'whami', #1, 'whami' // Shift off the cpu number
//
// sll 'whami', #22, 'whami' // Get our node offset
// addq 'raddr', 'whami', 'raddr' // Get our base node space address
//
// mb
// stqp 'rsum', 0('raddr') // write the right tlintrsum reg
// mb
// ldqp 'rsum', 0('raddr') // dummy read to tlintrsum
// bis 'rsum', 'rsum', 'rsum' // needed to complete the ldqp above -jpo
// .endm
#define Write_TLINTRSUMx(_rsum,_raddr,_whami) \
nop; \
mfpr _whami,pt_whami; \
extbl _whami,1,_whami; \
lda _raddr,0xff88(zero); \
sll _raddr,24,_raddr; \
blbs _whami,1f; \
lda _raddr,0x1180(_raddr);\
br zero,2f; \
1: lda _raddr,0x11c0(_raddr);\
2: srl _whami,1,_whami; \
addq _raddr,_whami,_raddr; \
mb; \
stqp _rsum,0(_raddr); \
ldqp _rsum,0(_raddr); \
bis _rsum,_rsum,_rsum
//
// Macro to determine highest priority TIOP Node ID from interrupt pending mask
//
// Assumed register usage:
// rmask - TLINTRSUMx contents, shifted to isolate IOx bits
// rid - TLSB Node ID of highest TIOP
//.macro Intr_Find_TIOP rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6
// srl 'rmask', #4, 'rid' // check IOP8
// blbc 'rid', l1 // not IOP8
//
// lda 'rid', 8(r31) // IOP8
// br r31, l6
//
// l1: srl 'rmask', #3, 'rid' // check IOP7
// blbc 'rid', l2 // not IOP7
//
// lda 'rid', 7(r31) // IOP7
// br r31, l6
//
// l2: srl 'rmask', #2, 'rid' // check IOP6
// blbc 'rid', l3 // not IOP6
//
// lda 'rid', 6(r31) // IOP6
// br r31, l6
//
// l3: srl 'rmask', #1, 'rid' // check IOP5
// blbc 'rid', l4 // not IOP5
//
// lda 'rid', 5(r31) // IOP5
// br r31, l6
//
// l4: srl 'rmask', #0, 'rid' // check IOP4
// blbc 'rid', l5 // not IOP4
//
// lda r14, 4(r31) // IOP4
// br r31, l6
//
// l5: lda r14, 0(r31) // passive release
// l6:
// .endm
#define Intr_Find_TIOP(_rmask,_rid) \
srl _rmask,3,_rid; \
blbc _rid,1f; \
lda _rid,8(zero); \
br zero,6f; \
1: srl _rmask,3,_rid; \
blbc _rid, 2f; \
lda _rid, 7(r31); \
br r31, 6f; \
2: srl _rmask, 2, _rid; \
blbc _rid, 3f; \
lda _rid, 6(r31); \
br r31, 6f; \
3: srl _rmask, 1, _rid; \
blbc _rid, 4f; \
lda _rid, 5(r31); \
br r31, 6f; \
4: srl _rmask, 0, _rid; \
blbc _rid, 5f; \
lda r14, 4(r31); \
br r31, 6f; \
5: lda r14, 0(r31); \
6:
//
// Macro to calculate base node space address for given node id
//
// Assumed register usage:
// rid - TLSB node id
// raddr - base node space address
//.macro Get_TLSB_Node_Address rid, raddr
// sll 'rid', #22, 'rid' // Get offset of IOP node
// lda 'raddr', ^xff88(r31) // Get base node space address bits
//
// sll 'raddr', #24, 'raddr' // Shift up to proper position
// addq 'raddr', 'rid', 'raddr' // Get TIOP node space address
// .iif ne turbo_pcia_intr_fix, srl 'rid', #22, 'rid' // Restore IOP node id
//.endm
#define turbo_pcia_intr_fix 0
#if turbo_pcia_intr_fix != 0
#define Get_TLSB_Node_Address(_rid,_raddr) \
sll _rid,22,_rid; \
lda _raddr,0xff88(zero); \
sll _raddr,24,_raddr; \
addq _raddr,_rid,_raddr; \
srl _rid,22,_rid
#else
#define Get_TLSB_Node_Address(_rid,_raddr) \
sll _rid,22,_rid; \
lda _raddr,0xff88(zero); \
sll _raddr,24,_raddr; \
addq _raddr,_rid,_raddr
#endif
// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd
// .iif eq tlsb, lda 'rs1',<tlep$'tlepreg'_offset>(r31)
// .iif ne tlsb, lda 'rs1',<tlsb$'tlepreg'_offset>(r31)
// or 'rs1', 'nodebase', 'rs1'
// ldlp 'rs', 0('rs1')
// .iif eq crd, stlp 'rs', mchk$'tlepreg'('rlog') // store in frame
// .iif ne crd, stlp 'rs', mchk$crd_'tlepreg'('rlog') // store in frame
// .iif ne clr, stlp 'rs',0('rs1') // optional write to clear
// .endm
// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0
// mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0
// .endm
#define CONCAT(_a,_b) _a ## _b
#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
or _rs1,_nodebase,_rs1; \
ldlp _rs1,0(_rs1); \
stlp _rs,CONCAT(mchk_,_tlepreg)(_rlog)
#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0
// mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1
// .endm
#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
lda _rs1,CONCAT(tlep_,_tlepreg)(zero); \
or _rs1,_nodebase,_rs1; \
ldlp _rs1,0(_rs1); \
stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
#define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
or _rs1,_nodebase,_rs1; \
ldlp _rs1,0(_rs1); \
stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)
#define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) \
lda _rs1,CONCAT(tlsb_,_tlepreg)(zero); \
or _rs1,_nodebase,_rs1; \
ldlp _rs1,0(_rs1); \
stlp _rs,CONCAT(mchk_crd_,_tlepreg)(_rlog); \
stlp _rs,0(_rs1)
#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg)
#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg)
// .macro save_pcia_intr irq
// and r13, #^xf, r25 // isolate low 4 bits
// addq r14, #4, r14 // format the TIOP Node id field
// sll r14, #4, r14 // shift the TIOP Node id
// or r14, r25, r10 // merge Node id/hose/HPC
// mfpr r14, pt14 // get saved value
// extbl r14, #'irq', r25 // confirm none outstanding
// bne r25, sys$machine_check_while_in_pal
// insbl r10, #'irq', r10 // align new info
// or r14, r10, r14 // merge info
// mtpr r14, pt14 // save it
// bic r13, #^xf, r13 // clear low 4 bits of vector
// .endm
#define save_pcia_intr(_irq) \
and r13, 0xf, r25; \
addq r14, 4, r14; \
sll r14, 4, r14; \
or r14, r25, r10; \
mfpr r14, pt14; \
extbl r14, _irq, r25; \
bne r25, sys_machine_check_while_in_pal; \
insbl r10, _irq, r10; \
or r14, r10, r14; \
mtpr r14, pt14; \
bic r13, 0xf, r13
ALIGN_BLOCK
// .sbttl "wripir - PALcode for wripir instruction"
//orig SYS$WRIPIR: // R16 has the processor number.
EXPORT(sys_wripir)
//++
// Convert the processor number to a CPU mask
//--
and r16,0xf, r14 // mask the top stuff (16 CPUs supported)
bis r31,0x1,r16 // get a one
sll r16,r14,r14 // shift the bit to the right place
//++
// Build the Broadcast Space base address
//--
lda r13,0xff8e(r31) // Load the upper address bits
sll r13,24,r13 // shift them to the top
//++
// Send out the IP Intr
//--
stqp r14, 0x40(r13) // Write to TLIPINTR reg WAS TLSB_TLIPINTR_OFFSET
wmb // Push out the store
hw_rei
ALIGN_BLOCK
// .sbttl "CFLUSH- PALcode for CFLUSH instruction"
//+
// SYS$CFLUSH
// Entry:
//
// R16 - contains the PFN of the page to be flushed
//
// Function:
// Flush all Dstream caches of 1 entire page
//
//-
EXPORT(sys_cflush)
// #convert pfn to addr, and clean off <63:20>
// #sll r16, <page_offset_size_bits>+<63-20>>, r12
sll r16, page_offset_size_bits+(63-20),r12
// #ldah r13,<<1@22>+32768>@-16(r31)// + xxx<31:16>
// # stolen from srcmax code. XXX bugnion
lda r13, 0x10(r31) // assume 16Mbytes of cache
sll r13, 20, r13 // convert to bytes
srl r12, 63-20, r12 // shift back to normal position
xor r12, r13, r12 // xor addr<18>
or r31, 8192/(32*8), r13 // get count of loads
nop
cflush_loop:
subq r13, 1, r13 // decr counter
mfpr r25, ev5__intid // Fetch level of interruptor
ldqp r31, 32*0(r12) // do a load
ldqp r31, 32*1(r12) // do next load
ldqp r31, 32*2(r12) // do next load
ldqp r31, 32*3(r12) // do next load
ldqp r31, 32*4(r12) // do next load
ldqp r31, 32*5(r12) // do next load
ldqp r31, 32*6(r12) // do next load
ldqp r31, 32*7(r12) // do next load
mfpr r14, ev5__ipl // Fetch current level
lda r12, (32*8)(r12) // skip to next cache block addr
cmple r25, r14, r25 // R25 = 1 if intid .less than or eql ipl
beq r25, 1f // if any int's pending, re-queue CFLUSH -- need to check for hlt interrupt???
bne r13, cflush_loop // loop till done
hw_rei // back to user
ALIGN_BRANCH
1: // Here if interrupted
mfpr r12, exc_addr
subq r12, 4, r12 // Backup PC to point to CFLUSH
mtpr r12, exc_addr
nop
mfpr r31, pt0 // Pad exc_addr write
hw_rei
ALIGN_BLOCK
// .sbttl "CSERVE- PALcode for CSERVE instruction"
//+
// SYS$CSERVE
//
// Function:
// Various functions for private use of console software
//
// option selector in r0
// arguments in r16....
//
//
// r0 = 0 unknown
//
// r0 = 1 ldqp
// r0 = 2 stqp
// args, are as for normal STQP/LDQP in VMS PAL
//
// r0 = 3 dump_tb's
// r16 = detination PA to dump tb's to.
//
// r0<0> = 1, success
// r0<0> = 0, failure, or option not supported
// r0<63:1> = (generally 0, but may be function dependent)
// r0 - load data on ldqp
//
//-
EXPORT(sys_cserve)
#ifdef SIMOS
/* taken from scrmax */
cmpeq r18, CSERVE_K_RD_IMPURE, r0
bne r0, Sys_Cserve_Rd_Impure
cmpeq r18, CSERVE_K_JTOPAL, r0
bne r0, Sys_Cserve_Jtopal
call_pal 0
or r31, r31, r0
hw_rei // and back we go
Sys_Cserve_Rd_Impure:
mfpr r0, pt_impure // Get base of impure scratch area.
hw_rei
ALIGN_BRANCH
Sys_Cserve_Jtopal:
bic a0, 3, t8 // Clear out low 2 bits of address
bis t8, 1, t8 // Or in PAL mode bit
mtpr t8,exc_addr
hw_rei
#else /* SIMOS */
cmpeq r16, cserve_ldlp, r12 // check for ldqp
bne r12, 1f // br if
cmpeq r16, cserve_stlp, r12 // check for stqp
bne r12, 2f // br if
cmpeq r16, cserve_callback, r12 // check for callback entry
bne r12, csrv_callback // br if
cmpeq r16, cserve_identify, r12 // check for callback entry
bne r12, csrv_identify // br if
or r31, r31, r0 // set failure
nop // pad palshadow write
hw_rei // and back we go
#endif /* SIMOS */
// ldqp
ALIGN_QUAD
1:
ldqp r0,0(r17) // get the data
nop // pad palshadow write
hw_rei // and back we go
// stqp
ALIGN_QUAD
2:
stqp r18, 0(r17) // store the data
#ifdef SIMOS
lda r0,17(r31) // bogus
#else
lda r0, CSERVE_SUCCESS(r31) // set success
#endif
hw_rei // and back we go
ALIGN_QUAD
csrv_callback:
ldq r16, 0(r17) // restore r16
ldq r17, 8(r17) // restore r17
lda r0, hlt_c_callback(r31)
br r31, sys_enter_console
csrv_identify:
mfpr r0, pal_base
ldqp r0, 8(r0)
hw_rei
// dump tb's
ALIGN_QUAD
0:
// DTB PTEs - 64 entries
addq r31, 64, r0 // initialize loop counter
nop
1: mfpr r12, ev5__dtb_pte_temp // read out next pte to temp
mfpr r12, ev5__dtb_pte // read out next pte to reg file
subq r0, 1, r0 // decrement loop counter
nop // Pad - no Mbox instr in cycle after mfpr
stqp r12, 0(r16) // store out PTE
addq r16, 8 ,r16 // increment pointer
bne r0, 1b
ALIGN_BRANCH
// ITB PTEs - 48 entries
addq r31, 48, r0 // initialize loop counter
nop
2: mfpr r12, ev5__itb_pte_temp // read out next pte to temp
mfpr r12, ev5__itb_pte // read out next pte to reg file
subq r0, 1, r0 // decrement loop counter
nop //
stqp r12, 0(r16) // store out PTE
addq r16, 8 ,r16 // increment pointer
bne r0, 2b
or r31, 1, r0 // set success
hw_rei // and back we go
// .sbttl "SYS$INTERRUPT - Interrupt processing code"
//+
// SYS$INTERRUPT
//
// Current state:
// Stack is pushed
// ps, sp and gp are updated
// r12, r14 - available
// r13 - INTID (new EV5 IPL)
// r25 - ISR
// r16, r17, r18 - available
//
//-
EXPORT(sys_interrupt)
cmpeq r13, 31, r12
bne r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd)
cmpeq r13, 30, r12
bne r12, sys_int_powerfail // Check for level 30 interrupt (powerfail)
cmpeq r13, 29, r12
bne r12, sys_int_perf_cnt // Check for level 29 interrupt (performance counters)
cmpeq r13, 23, r12
bne r12, sys_int_23 // Check for level 23 interrupt
cmpeq r13, 22, r12
bne r12, sys_int_22 // Check for level 22 interrupt (might be
// interprocessor or timer interrupt)
cmpeq r13, 21, r12
bne r12, sys_int_21 // Check for level 21 interrupt
cmpeq r13, 20, r12
bne r12, sys_int_20 // Check for level 20 interrupt (might be corrected
// system error interrupt)
mfpr r14, exc_addr // ooops, something is wrong
br r31, pal_pal_bug_check_from_int
//+
//sys$int_2*
// Routines to handle device interrupts at IPL 23-20.
// System specific method to ack/clear the interrupt, detect passive release,
// detect interprocessor (22), interval clock (22), corrected
// system error (20)
//
// Current state:
// Stack is pushed
// ps, sp and gp are updated
// r12, r14 - available
// r13 - INTID (new EV5 IPL)
// r25 - ISR
//
// On exit:
// Interrupt has been ack'd/cleared
// a0/r16 - signals IO device interrupt
// a1/r17 - contains interrupt vector
// exit to ent_int address
//
//-
ALIGN_BRANCH
sys_int_23:
Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
srl r13, 22, r13 // shift down to examine IPL17
Intr_Find_TIOP(r13,r14)
beq r14, 1f
Get_TLSB_Node_Address(r14,r10)
lda r10, 0xac0(r10) // Get base TLILID address
ldlp r13, 0(r10) // Read the TLILID register
bne r13, pal_post_dev_interrupt
1: lda r16, osfint_c_passrel(r31) // passive release
br r31, pal_post_interrupt //
ALIGN_BRANCH
sys_int_22:
Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
srl r13, 6, r14 // check the Intim bit
blbs r14, tlep_intim // go service Intim
srl r13, 5, r14 // check the IP Int bit
blbs r14, tlep_ipint // go service IP Int
srl r13, 17, r13 // shift down to examine IPL16
Intr_Find_TIOP(r13,r14)
beq r14, 1f
Get_TLSB_Node_Address(r14,r10)
lda r10, 0xa80(r10) // Get base TLILID address
ldlp r13, 0(r10) // Read the TLILID register
#if turbo_pcia_intr_fix == 0
// .if eq turbo_pcia_intr_fix
bne r13, pal_post_dev_interrupt
//orig .iff
beq r13, 1f
and r13, 0x3, r10 // check for PCIA bits
beq r10, pal_post_dev_interrupt // done if nothing set
save_pcia_intr(2)
br r31, pal_post_dev_interrupt //
// .endc
#endif /* turbo_pcia_intr_fix == 0 */
1: lda r16, osfint_c_passrel(r31) // passive release
br r31, pal_post_interrupt //
ALIGN_BRANCH
sys_int_21:
Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
srl r13, 12, r13 // shift down to examine IPL15
Intr_Find_TIOP(r13,r14)
beq r14, 1f
Get_TLSB_Node_Address(r14,r10)
lda r10, 0xa40(r10) // Get base TLILID address
ldlp r13, 0(r10) // Read the TLILID register
#if turbo_pcia_intr_fix == 0
//orig .if eq turbo_pcia_intr_fix
bne r13, pal_post_dev_interrupt
//orig .iff
beq r13, 1f
and r13, 0x3, r10 // check for PCIA bits
beq r10, pal_post_dev_interrupt // done if nothing set
save_pcia_intr(1)
br r31, pal_post_dev_interrupt //
// orig .endc
#endif /* turbo_pcia_intr_fix == 0 */
1: lda r16, osfint_c_passrel(r31) // passive release
br r31, pal_post_interrupt //
ALIGN_BRANCH
sys_int_20:
lda r13, 1(r31) // Duart0 bit
Write_TLINTRSUMx(r13,r10,r14) // clear the duart0 bit
Read_TLINTRSUMx(r13,r10,r14) // read the right TLINTRSUMx
blbs r13, tlep_uart0 // go service UART int
srl r13, 7, r13 // shift down to examine IPL14
Intr_Find_TIOP(r13,r14)
beq r14, tlep_ecc // Branch if not IPL14
Get_TLSB_Node_Address(r14,r10)
lda r10, 0xa00(r10) // Get base TLILID0 address
ldlp r13, 0(r10) // Read the TLILID register
#if turbo_pcia_intr_fix == 0
// orig .if eq turbo_pcia_intr_fix
bne r13, pal_post_dev_interrupt
// orig .iff
beq r13, 1f
and r13, 0x3, r10 // check for PCIA bits
beq r10, pal_post_dev_interrupt // done if nothing set
save_pcia_intr(0)
br r31, pal_post_dev_interrupt //
// orig .endc
#endif
1: lda r16, osfint_c_passrel(r31) // passive release
br r31, pal_post_interrupt //
ALIGN_BRANCH
tlep_intim:
lda r13, 0xffb(r31) // get upper GBUS address bits
sll r13, 28, r13 // shift up to top
lda r13, (0x300)(r13) // full CSRC address (tlep watch csrc offset)
ldqp r13, 0(r13) // read CSRC
lda r13, 0x40(r31) // load Intim bit
Write_TLINTRSUMx(r13,r10,r14) // clear the Intim bit
lda r16, osfint_c_clk(r31) // passive release
br r31, pal_post_interrupt // Build the stack frame
ALIGN_BRANCH
tlep_ipint:
lda r13, 0x20(r31) // load IP Int bit
Write_TLINTRSUMx(r13,r10,r14) // clear the IP Int bit
lda r16, osfint_c_ip(r31) // passive release
br r31, pal_post_interrupt // Build the stack frame
ALIGN_BRANCH
tlep_uart0:
lda r13, 0xffa(r31) // get upper GBUS address bits
sll r13, 28, r13 // shift up to top
ldlp r14, 0x80(r13) // zero pointer register
lda r14, 3(r31) // index to RR3
stlp r14, 0x80(r13) // write pointer register
mb
mb
ldlp r14, 0x80(r13) // read RR3
srl r14, 5, r10 // is it Channel A RX?
blbs r10, uart0_rx
srl r14, 4, r10 // is it Channel A TX?
blbs r10, uart0_tx
srl r14, 2, r10 // is it Channel B RX?
blbs r10, uart1_rx
srl r14, 1, r10 // is it Channel B TX?
blbs r10, uart1_tx
lda r8, 0(r31) // passive release
br r31, clear_duart0_int // clear tlintrsum and post
ALIGN_BRANCH
uart0_rx:
lda r8, 0x680(r31) // UART0 RX vector
br r31, clear_duart0_int // clear tlintrsum and post
ALIGN_BRANCH
uart0_tx:
lda r14, 0x28(r31) // Reset TX Int Pending code
mb
stlp r14, 0x80(r13) // write Channel A WR0
mb
lda r8, 0x6c0(r31) // UART0 TX vector
br r31, clear_duart0_int // clear tlintrsum and post
ALIGN_BRANCH
uart1_rx:
lda r8, 0x690(r31) // UART1 RX vector
br r31, clear_duart0_int // clear tlintrsum and post
ALIGN_BRANCH
uart1_tx:
lda r14, 0x28(r31) // Reset TX Int Pending code
stlp r14, 0(r13) // write Channel B WR0
lda r8, 0x6d0(r31) // UART1 TX vector
br r31, clear_duart0_int // clear tlintrsum and post
ALIGN_BRANCH
clear_duart0_int:
lda r13, 1(r31) // load duart0 bit
Write_TLINTRSUMx(r13,r10,r14) // clear the duart0 bit
beq r8, 1f
or r8, r31, r13 // move vector to r13
br r31, pal_post_dev_interrupt // Build the stack frame
1: nop
nop
hw_rei
// lda r16, osfint_c_passrel(r31) // passive release
// br r31, pal_post_interrupt //
ALIGN_BRANCH
tlep_ecc:
mfpr r14, pt_whami // get our node id
extbl r14, 1, r14 // shift to bit 0
srl r14, 1, r14 // shift off cpu number
Get_TLSB_Node_Address(r14,r10) // compute our nodespace address
ldlp r13, 0x40(r10) // read our TLBER WAS tlsb_tlber_offset
srl r13, 17, r13 // shift down the CWDE/CRDE bits
and r13, 3, r13 // mask the CWDE/CRDE bits
beq r13, 1f
ornot r31, r31, r12 // set flag
lda r9, mchk_c_sys_ecc(r31) // System Correctable error MCHK code
br r31, sys_merge_sys_corr // jump to CRD logout frame code
1: lda r16, osfint_c_passrel(r31) // passive release
ALIGN_BRANCH
pal_post_dev_interrupt:
or r13, r31, r17 // move vector to a1
or r31, osfint_c_dev, r16 // a0 signals IO device interrupt
pal_post_interrupt:
mfpr r12, pt_entint
mtpr r12, exc_addr
nop
nop
hw_rei_spe
//+
// sys_passive_release
// Just pretend the interrupt never occurred.
//-
EXPORT(sys_passive_release)
mtpr r11, ev5__dtb_cm // Restore Mbox current mode for ps
nop
mfpr r31, pt0 // Pad write to dtb_cm
hw_rei
//+
//sys_int_powerfail
// A powerfail interrupt has been detected. The stack has been pushed.
// IPL and PS are updated as well.
//
// I'm not sure what to do here, I'm treating it as an IO device interrupt
//
//-
ALIGN_BLOCK
sys_int_powerfail:
lda r12, 0xffc4(r31) // get GBUS_MISCR address bits
sll r12, 24, r12 // shift to proper position
ldqp r12, 0(r12) // read GBUS_MISCR
srl r12, 5, r12 // isolate bit <5>
blbc r12, 1f // if clear, no missed mchk
// Missed a CFAIL mchk
lda r13, 0xffc7(r31) // get GBUS$SERNUM address bits
sll r13, 24, r13 // shift to proper position
lda r14, 0x40(r31) // get bit <6> mask
ldqp r12, 0(r13) // read GBUS$SERNUM
or r12, r14, r14 // set bit <6>
stqp r14, 0(r13) // clear GBUS$SERNUM<6>
mb
mb
1: br r31, sys_int_mchk // do a machine check
lda r17, scb_v_pwrfail(r31) // a1 to interrupt vector
mfpr r25, pt_entint
lda r16, osfint_c_dev(r31) // a0 to device code
mtpr r25, exc_addr
nop // pad exc_addr write
nop
hw_rei_spe
//+
// sys$halt_interrupt
// A halt interrupt has been detected. Pass control to the console.
//
//
//-
EXPORT(sys_halt_interrupt)
ldah r13, 0x1800(r31) // load Halt/^PHalt bits
Write_TLINTRSUMx(r13,r10,r14) // clear the ^PHalt bits
mtpr r11, dtb_cm // Restore Mbox current mode
nop
nop
mtpr r0, pt0
#ifndef SIMOS
pvc_jsr updpcb, bsr=1
bsr r0, pal_update_pcb // update the pcb
#endif
lda r0, hlt_c_hw_halt(r31) // set halt code to hw halt
br r31, sys_enter_console // enter the console
//+
// sys$int_mchk_or_crd
//
// Current state:
// Stack is pushed
// ps, sp and gp are updated
// r12
// r13 - INTID (new EV5 IPL)
// r14 - exc_addr
// r25 - ISR
// r16, r17, r18 - available
//
//-
ALIGN_BLOCK
sys_int_mchk_or_crd:
srl r25, isr_v_mck, r12
blbs r12, sys_int_mchk
//+
// Not a Machine check interrupt, so must be an Internal CRD interrupt
//-
mb //Clear out Cbox prior to reading IPRs
srl r25, isr_v_crd, r13 //Check for CRD
blbc r13, pal_pal_bug_check_from_int //If CRD not set, shouldn't be here!!!
lda r9, 1(r31)
sll r9, hwint_clr_v_crdc, r9 // get ack bit for crd
mtpr r9, ev5__hwint_clr // ack the crd interrupt
or r31, r31, r12 // clear flag
lda r9, mchk_c_ecc_c(r31) // Correctable error MCHK code
sys_merge_sys_corr:
ldah r14, 0xfff0(r31)
mtpr r0, pt0 // save r0 for scratch
zap r14, 0xE0, r14 // Get Cbox IPR base
mtpr r1, pt1 // save r0 for scratch
ldqp r0, ei_addr(r14) // EI_ADDR IPR
ldqp r10, fill_syn(r14) // FILL_SYN IPR
bis r0, r10, r31 // Touch lds to make sure they complete before doing scrub
blbs r12, 1f // no scrubbing for IRQ0 case
// XXX bugnion pvc_jsr crd_scrub_mem, bsr=1
bsr r13, sys_crd_scrub_mem // and go scrub
// ld/st pair in scrub routine will have finished due
// to ibox stall of stx_c. Don't need another mb.
ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
or r8, r31, r12 // Must only be executed once in this flow, and must
br r31, 2f // be after the scrub routine.
1: ldqp r8, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
// For IRQ0 CRD case only - meaningless data.
2: mfpr r13, pt_mces // Get MCES
srl r12, ei_stat_v_ei_es, r14 // Isolate EI_STAT:EI_ES
blbc r14, 6f // branch if 630
srl r13, mces_v_dsc, r14 // check if 620 reporting disabled
blbc r14, 5f // branch if enabled
or r13, r31, r14 // don't set SCE if disabled
br r31, 8f // continue
5: bis r13, BIT(mces_v_sce), r14 // Set MCES<SCE> bit
br r31, 8f
6: srl r13, mces_v_dpc, r14 // check if 630 reporting disabled
blbc r14, 7f // branch if enabled
or r13, r31, r14 // don't set PCE if disabled
br r31, 8f // continue
7: bis r13, BIT(mces_v_pce), r14 // Set MCES<PCE> bit
// Setup SCB if dpc is not set
8: mtpr r14, pt_mces // Store updated MCES
srl r13, mces_v_sce, r1 // Get SCE
srl r13, mces_v_pce, r14 // Get PCE
or r1, r14, r1 // SCE OR PCE, since they share
// the CRD logout frame
// Get base of the logout area.
GET_IMPURE(r14) // addr of per-cpu impure area
GET_ADDR(r14,(pal_logout_area+mchk_crd_base),r14)
blbc r1, sys_crd_write_logout_frame // If pce/sce not set, build the frame
// Set the 2nd error flag in the logout area:
lda r1, 3(r31) // Set retry and 2nd error flags
sll r1, 30, r1 // Move to bits 31:30 of logout frame flag longword
stlp r1, mchk_crd_flag+4(r14) // store flag longword
br sys_crd_ack
sys_crd_write_logout_frame:
// should only be here if neither the pce or sce bits are set
//+
// Write the mchk code to the logout area
//-
stqp r9, mchk_crd_mchk_code(r14)
//+
// Write the first 2 quadwords of the logout area:
//-
lda r1, 1(r31) // Set retry flag
sll r1, 63, r9 // Move retry flag to bit 63
lda r1, mchk_crd_size(r9) // Combine retry flag and frame size
stqp r1, mchk_crd_flag(r14) // store flag/frame size
#ifndef SIMOS
/* needed? bugnion */
lda r1, mchk_crd_sys_base(r31) // sys offset
sll r1, 32, r1
lda r1, mchk_crd_cpu_base(r1) // cpu offset
stqp r1, mchk_crd_offsets(r14) // store sys offset/cpu offset into logout frame
#endif
//+
// Write error IPRs already fetched to the logout area
//-
stqp r0, mchk_crd_ei_addr(r14)
stqp r10, mchk_crd_fill_syn(r14)
stqp r8, mchk_crd_ei_stat(r14)
stqp r25, mchk_crd_isr(r14)
//+
// Log system specific info here
//-
crd_storeTLEP_:
lda r1, 0xffc4(r31) // Get GBUS$MISCR address
sll r1, 24, r1
ldqp r1, 0(r1) // Read GBUS$MISCR
sll r1, 16, r1 // shift up to proper field
mfpr r10, pt_whami // get our node id
extbl r10, 1, r10 // shift to bit 0
or r1, r10, r1 // merge MISCR and WHAMI
stlp r1, mchk_crd_whami(r14) // write to crd logout area
srl r10, 1, r10 // shift off cpu number
Get_TLSB_Node_Address(r10,r0) // compute our nodespace address
OSFcrd_TLEPstore_tlsb(tldev)
OSFcrd_TLEPstore_tlsb_clr(tlber)
OSFcrd_TLEPstore_tlsb_clr(tlesr0)
OSFcrd_TLEPstore_tlsb_clr(tlesr1)
OSFcrd_TLEPstore_tlsb_clr(tlesr2)
OSFcrd_TLEPstore_tlsb_clr(tlesr3)
sys_crd_ack:
mfpr r0, pt0 // restore r0
mfpr r1, pt1 // restore r1
srl r12, ei_stat_v_ei_es, r12
blbc r12, 5f
srl r13, mces_v_dsc, r10 // logging enabled?
br r31, 6f
5: srl r13, mces_v_dpc, r10 // logging enabled?
6: blbc r10, sys_crd_post_interrupt // logging enabled -- report it
// logging not enabled --
// Get base of the logout area.
GET_IMPURE(r13) // addr of per-cpu impure area
GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13)
ldlp r10, mchk_crd_rsvd(r13) // bump counter
addl r10, 1, r10
stlp r10, mchk_crd_rsvd(r13)
mb
br r31, sys_crd_dismiss_interrupt // just return
//+
// The stack is pushed. Load up a0,a1,a2 and vector via entInt
//
//-
ALIGN_BRANCH
sys_crd_post_interrupt:
lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
lda r17, scb_v_proc_corr_err(r31) // a1 <- interrupt vector
blbc r12, 1f
lda r17, scb_v_sys_corr_err(r31) // a1 <- interrupt vector
1: subq r31, 1, r18 // get a -1
mfpr r25, pt_entInt
srl r18, 42, r18 // shift off low bits of kseg addr
mtpr r25, exc_addr // load interrupt vector
sll r18, 42, r18 // shift back into position
or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
hw_rei_spe // done
//+
// The stack is pushed. Need to back out of it all.
//-
sys_crd_dismiss_interrupt:
br r31, Call_Pal_Rti
// .sbttl sys_crd_scrub_mem
//+
//
// sys_crd_scrub_mem
// called
// jsr r13, sys$crd_scrub_mem
// r0 = addr of cache block
//
//-
ALIGN_BLOCK // align for branch target
sys_crd_scrub_mem:
// now find error in memory, and attempt to scrub that cache block
// This routine just scrubs the failing octaword
// Only need to "touch" one quadword per octaword to accomplish the scrub
srl r0, 39, r8 // get high bit of bad pa
blbs r8, 1f // don't attempt fixup on IO space addrs
nop // needed to align the ldqpl to octaword boundary
nop // "
ldqpl r8, 0(r0) // attempt to read the bad memory
// location
// (Note bits 63:40,3:0 of ei_addr
// are set to 1, but as long as
// we are doing a phys ref, should
// be ok)
nop // Needed to keep the Ibox from swapping the ldqpl into E1
stqpc r8, 0(r0) // Store it back if it is still there.
// If store fails, location already
// scrubbed by someone else
nop // needed to align the ldqpl to octaword boundary
lda r8, 0x20(r31) // flip bit 5 to touch next hexaword
xor r8, r0, r0
nop // needed to align the ldqpl to octaword boundary
nop // "
ldqpl r8, 0(r0) // attempt to read the bad memory
// location
// (Note bits 63:40,3:0 of ei_addr
// are set to 1, but as long as
// we are doing a phys ref, should
// be ok)
nop // Needed to keep the Ibox from swapping the ldqpl into E1
stqpc r8, 0(r0) // Store it back if it is still there.
// If store fails, location already
// scrubbed by someone else
lda r8, 0x20(r31) // restore r0 to original address
xor r8, r0, r0
//at this point, ei_stat could be locked due to a new corr error on the ld,
//so read ei_stat to unlock AFTER this routine.
// XXX bugnion pvc$jsr crd_scrub_mem, bsr=1, dest=1
1: ret r31, (r13) // and back we go
// .sbttl "SYS$INT_MCHK - MCHK Interrupt code"
//+
// Machine check interrupt from the system. Setup and join the
// regular machine check flow.
// On exit:
// pt0 - saved r0
// pt1 - saved r1
// pt4 - saved r4
// pt5 - saved r5
// pt6 - saved r6
// pt10 - saved exc_addr
// pt_misc<47:32> - mchk code
// pt_misc<31:16> - scb vector
// r14 - base of Cbox IPRs in IO space
// MCES<mchk> is set
//-
ALIGN_BLOCK
sys_int_mchk:
lda r14, mchk_c_sys_hrd_error(r31)
mfpr r12, exc_addr
addq r14, 1, r14 // Flag as interrupt
nop
sll r14, 32, r14 // Move mchk code to position
mtpr r12, pt10 // Stash exc_addr
mfpr r12, pt_misc // Get MCES and scratch
mtpr r0, pt0 // Stash for scratch
zap r12, 0x3c, r12 // Clear scratch
blbs r12, sys_double_machine_check // MCHK halt if double machine check
or r12, r14, r12 // Combine mchk code
lda r14, scb_v_sysmchk(r31) // Get SCB vector
sll r14, 16, r14 // Move SCBv to position
or r12, r14, r14 // Combine SCBv
bis r14, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
mtpr r14, pt_misc // Save mchk code!scbv!whami!mces
ldah r14, 0xfff0(r31)
mtpr r1, pt1 // Stash for scratch
zap r14, 0xE0, r14 // Get Cbox IPR base
mtpr r4, pt4
mtpr r5, pt5
#if beh_model
// .if ne beh_model
ldah r25, 0xC000(r31) // Get base of demon space
lda r25, 0x340(r25) // Add interrupt demon offset
ldqp r13, 0(r25) // Read the control register
nop
and r13, 0x10, r8 // For debug, check that the interrupt is expected
beq r8, interrupt_not_expected
bic r13, 0x10, r13
stqp r13, 0(r25) // Ack and clear the interrupt
// XXX bugnion pvc$violate 379 // stqp can't trap except replay. mt ipr only problem if mf same ipr in same shadow
.endc
#endif
mtpr r6, pt6
br r31, sys_mchk_collect_iprs // Join common machine check flow
// .sbttl "SYS$INT_PERF_CNT - Performance counter interrupt code"
//+
//sys$int_perf_cnt
//
// A performance counter interrupt has been detected. The stack has been pushed.
// IPL and PS are updated as well.
//
// on exit to interrupt entry point ENTINT::
// a0 = osfint$c_perf
// a1 = scb$v_perfmon (650)
// a2 = 0 if performance counter 0 fired
// a2 = 1 if performance counter 1 fired
// a2 = 2 if performance counter 2 fired
// (if more than one counter overflowed, an interrupt will be
// generated for each counter that overflows)
//
//
//-
ALIGN_BLOCK
sys_int_perf_cnt: // Performance counter interrupt
lda r17, scb_v_perfmon(r31) // a1 to interrupt vector
mfpr r25, pt_entint
lda r16, osfint_c_perf(r31) // a0 to perf counter code
mtpr r25, exc_addr
//isolate which perf ctr fired, load code in a2, and ack
mfpr r25, isr
or r31, r31, r18 // assume interrupt was pc0
srl r25, isr_v_pc1, r25 // isolate
cmovlbs r25, 1, r18 // if pc1 set, load 1 into r14
srl r25, 1, r25 // get pc2
cmovlbs r25, 2, r18 // if pc2 set, load 2 into r14
lda r25, 1(r31) // get a one
sll r25, r18, r25
sll r25, hwint_clr_v_pc0c, r25 // ack only the perf counter that generated the interrupt
mtpr r25, hwint_clr
hw_rei_spe
ALIGN_BLOCK
// .sbttl "System specific RESET code"
//+
// RESET code
// On entry:
// r1 = pal_base +8
//
// Entry state on trap:
// r0 = whami
// r2 = base of scratch area
// r3 = halt code
// and the following 3 if init_cbox is enabled:
// r5 = sc_ctl
// r6 = bc_ctl
// r7 = bc_cnfg
//
// Entry state on switch:
// r17 - new PC
// r18 - new PCBB
// r19 - new VPTB
//
//-
#if rax_mode==0
.globl sys_reset
sys_reset:
// mtpr r31, ic_flush_ctl // do not flush the icache - done by hardware before SROM load
mtpr r31, itb_ia // clear the ITB
mtpr r31, dtb_ia // clear the DTB
lda r1, -8(r1) // point to start of code
mtpr r1, pal_base // initialize PAL_BASE
// Interrupts
mtpr r31, astrr // stop ASTs
mtpr r31, aster // stop ASTs
mtpr r31, sirr // clear software interrupts
mtpr r0, pt1 // r0 is whami (unless we entered via swp)
//orig ldah r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31)
ldah r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero)
#if disable_crd == 0
// .if eq disable_crd
bis r31, 1, r0
sll r0, icsr_v_crde, r0 // A 1 in iscr<corr_read_enable>
or r0, r1, r1 // Set the bit
#endif
mtpr r1, icsr // ICSR - Shadows enabled, Floating point enable,
// super page enabled, correct read per assembly option
// Mbox/Dcache init
//orig lda r1, <1@<mcsr$v_sp1>>(r31)
lda r1,BIT(mcsr_v_sp1)(zero)
mtpr r1, mcsr // MCSR - Super page enabled
lda r1, BIT(dc_mode_v_dc_ena)(r31)
ALIGN_BRANCH
// mtpr r1, dc_mode // turn Dcache on
nop
mfpr r31, pt0 // No Mbox instr in 1,2,3,4
mfpr r31, pt0
mfpr r31, pt0
mfpr r31, pt0
mtpr r31, dc_flush // flush Dcache
// build PS (IPL=7,CM=K,VMM=0,SW=0)
lda r11, 0x7(r31) // Set shadow copy of PS - kern mode, IPL=7
lda r1, 0x1F(r31)
mtpr r1, ipl // set internal <ipl>=1F
mtpr r31, ev5__ps // set new ps<cm>=0, Ibox copy
mtpr r31, dtb_cm // set new ps<cm>=0, Mbox copy
// Create the PALtemp pt_intmask -
// MAP:
// OSF IPL EV5 internal IPL(hex) note
// 0 0
// 1 1
// 2 2
// 3 14 device
// 4 15 device
// 5 16 device
// 6 1E device,performance counter, powerfail
// 7 1F
//
ldah r1, 0x1f1E(r31) // Create upper lw of int_mask
lda r1, 0x1615(r1)
sll r1, 32, r1
ldah r1, 0x1402(r1) // Create lower lw of int_mask
lda r1, 0x0100(r1)
mtpr r1, pt_intmask // Stash in PALtemp
// Unlock a bunch of chip internal IPRs
mtpr r31, exc_sum // clear out exeception summary and exc_mask
mfpr r31, va // unlock va, mmstat
//rig lda r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31)
lda r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero)
mtpr r8, icperr_stat // Clear Icache parity error & timeout status
//orig lda r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31)
lda r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
mtpr r8, dcperr_stat // Clear Dcache parity error status
rc r0 // clear intr_flag
mtpr r31, pt_trap
mfpr r0, pt_misc
srl r0, pt_misc_v_switch, r1
blbs r1, sys_reset_switch // see if we got here from swppal
// Rest of the "real" reset flow
// ASN
mtpr r31, dtb_asn
mtpr r31, itb_asn
lda r1, 0x67(r31)
sll r1, hwint_clr_v_pc0c, r1
mtpr r1, hwint_clr // Clear hardware interrupt requests
lda r1, BIT(mces_v_dpc)(r31) // 1 in disable processor correctable error
mfpr r0, pt1 // get whami
insbl r0, 1, r0 // isolate whami in correct pt_misc position
or r0, r1, r1 // combine whami and mces
mtpr r1, pt_misc // store whami and mces, swap bit clear
zapnot r3, 1, r0 // isolate halt code
mtpr r0, pt0 // save entry type
// Cycle counter
or r31, 1, r9 // get a one
sll r9, 32, r9 // shift to <32>
mtpr r31, cc // clear Cycle Counter
mtpr r9, cc_ctl // clear and enable the Cycle Counter
mtpr r31, pt_scc // clear System Cycle Counter
// Misc PALtemps
mtpr r31, maf_mode // no mbox instructions for 3 cycles
or r31, 1, r1 // get bogus scbb value
mtpr r1, pt_scbb // load scbb
mtpr r31, pt_prbr // clear out prbr
#ifdef SIMOS
// or zero,kludge_initial_pcbb,r1
GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
#else
mfpr r1, pal_base
//orig sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb
GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
#endif
mtpr r1, pt_pcbb // load pcbb
lda r1, 2(r31) // get a two
sll r1, 32, r1 // gen up upper bits
mtpr r1, mvptbr
mtpr r1, ivptbr
mtpr r31, pt_ptbr
// Performance counters
mtpr r31, pmctr
#if init_cbox != 0
// .if ne init_cbox
// Only init the Scache and the Bcache if there have been no previous
// cacheable dstream loads or stores.
//
// Inputs:
// r5 - sc_ctl
// r6 - bc_ctl
// r7 - bc_cnfg
ldah r0, 0xfff0(r31)
zap r0, 0xE0, r0 // Get Cbox IPR base
ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
sll r20, 1, r20
temp = 0x017441 // default bc_config
get_addr r21, temp, r31 // create default bc_config
lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
// XXX bugnion pvc$jsr scbcctl, bsr=1
bsr r10, set_sc_bc_ctl
update_bc_ctl_shadow r6, r23 // update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer
store_reg1 bc_config, r7, r23, ipr=1 // update bc_config shadow in impure area
// .endc
#endif
// Clear pmctr_ctl in impure area
#ifndef SIMOS
// can't assemble ???
update_pmctr_ctl r31, r1 // clear pmctr_ctl // r1 trashed
#endif
ldah r14, 0xfff0(r31)
zap r14, 0xE0, r14 // Get Cbox IPR base
#ifndef SIMOS
ldqp r31, sc_stat(r14) // Clear sc_stat and sc_addr
ldqp r31, ei_stat(r14)
ldqp r31, ei_stat(r14) // Clear ei_stat, ei_addr, bc_tag_addr, fill_syn
#endif
GET_IMPURE(r13)
stqpc r31, 0(r13) // Clear lock_flag
mfpr r0, pt0 // get entry type
br r31, sys_enter_console // enter the cosole
#endif /* rax_mode == 0 */
//.if ne rax_mode
#if rax_mode != 0
// For RAX:
// r0 - icsr at first, then used for cbox ipr base offset
// r2 - mcsr
// r3 - dc_mode
// r4 - maf_mode
// r5 - sc_ctl
// r6 - bc_ctl
// r7 - bc_cnfg
.globl sys_reset
sys_reset:
mtpr r31, ev5__dtb_cm // set mbox mode to kernel
mtpr r31, ev5__ps // set Ibox mode to kernel - E1
mtpr r0, ev5__icsr // Load ICSR - E1
mtpr r2, ev5__mcsr
mfpr r8, pal_base
ldah r0, 0xfff0(r31)
zap r0, 0xE0, r0 // Get Cbox IPR base
mtpr r31, ev5__itb_asn // clear asn - E1
ldqp r19, ev5__sc_ctl(r0) // read current sc_ctl
temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
lda r20, temp(r31) // create default bc_ctl (bc disabled, errors disabled, ecc mode)
sll r20, 1, r20
temp = 0x017441 // default bc_config
get_addr r21, temp, r31 // create default bc_config
lda r23, <1@sc_ctl_v_sc_flush>(r31) //set flag to invalidate scache in set_sc_bc_ctl
// XXX bugnion pvc$jsr scbcctl, bsr=1
bsr r10, set_sc_bc_ctl
update_bc_ctl_shadow r6, r2 // initialize bc_ctl shadow// adjusted impure pointer in r2
store_reg1 pmctr_ctl, r31, r2, ipr=1 // clear pmctr_ctl
store_reg1 bc_config, r7, r2, ipr=1 // initialize bc_config shadow
mtpr r3, ev5__dc_mode // write dc_mode
mtpr r31, ev5__dc_flush // flush dcache
mtpr r31, ev5__exc_sum // clear exc_sum - E1
mtpr r31, ev5__exc_mask // clear exc_mask - E1
ldah r2, 4(r31) // For EXC_ADDR
mtpr r2, ev5__exc_addr // EXC_ADDR to 40000 (hex)
mtpr r31, ev5__sirr // Clear SW interrupts (for ISP)
mtpr r4, ev5__maf_mode // write maf_mode
mtpr r31, ev5__alt_mode // set alt_mode to kernel
mtpr r31, ev5__itb_ia // clear ITB - E1
lda r1, 0x1F(r31) // For IPL
mtpr r1, ev5__ipl // IPL to 1F
mtpr r31, ev5__hwint_clr // clear hardware interrupts
mtpr r31, ev5__aster // disable AST interrupts
mtpr r31, ev5__astrr // clear AST requests
mtpr r31, ev5__dtb_ia // clear dtb
nop
mtpr r31, pt_trap
srl r2, page_offset_size_bits, r9 // Start to make PTE for address 40000
sll r9, 32, r9
lda r9, 0x7F01(r9) // Make PTE, V set, all RE set, all but UWE set
nop
mtpr r9, dtb_pte // ACORE hack, load TB with 1-1 translation for address 40000
mtpr r2, itb_tag // ACORE hack, load TB with 1-1 translation for address 40000
mtpr r2, dtb_tag
mtpr r9, itb_pte
and r31, r31, r0 // clear deposited registers, note: r2 already overwritten
and r31, r31, r3
and r31, r31, r4
and r31, r31, r5
and r31, r31, r6
and r31, r31, r7
hw_rei //May need to be a rei_stall since
//we write to TB's above
//However, it currently works ok. (JH)
// .endc
#endif /*rax_mode != 0 */
// swppal entry
// r0 - pt_misc
// r17 - new PC
// r18 - new PCBB
// r19 - new VPTB
sys_reset_switch:
or r31, 1, r9
sll r9, pt_misc_v_switch, r9
bic r0, r9, r0 // clear switch bit
mtpr r0, pt_misc
rpcc r1 // get cyccounter
ldqp r22, osfpcb_q_fen(r18) // get new fen/pme
ldlp r23, osfpcb_l_cc(r18) // get cycle counter
ldlp r24, osfpcb_l_asn(r18) // get new asn
ldqp r25, osfpcb_q_Mmptr(r18)// get new mmptr
sll r25, page_offset_size_bits, r25 // convert pfn to pa
mtpr r25, pt_ptbr // load the new mmptr
mtpr r18, pt_pcbb // set new pcbb
bic r17, 3, r17 // clean use pc
mtpr r17, exc_addr // set new pc
mtpr r19, mvptbr
mtpr r19, ivptbr
ldqp r30, osfpcb_q_Usp(r18) // get new usp
mtpr r30, pt_usp // save usp
sll r24, dtb_asn_v_asn, r8
mtpr r8, dtb_asn
sll r24, itb_asn_v_asn, r24
mtpr r24, itb_asn
mfpr r25, icsr // get current icsr
lda r24, 1(r31)
sll r24, icsr_v_fpe, r24 // 1 in icsr<fpe> position
bic r25, r24, r25 // clean out old fpe
and r22, 1, r22 // isolate new fen bit
sll r22, icsr_v_fpe, r22
or r22, r25, r25 // or in new fpe
mtpr r25, icsr // update ibox ipr
subl r23, r1, r1 // gen new cc offset
insll r1, 4, r1 // << 32
mtpr r1, cc // set new offset
or r31, r31, r0 // set success
ldqp r30, osfpcb_q_Ksp(r18) // get new ksp
mfpr r31, pt0 // stall
hw_rei_stall
// .sbttl "SYS_MACHINE_CHECK - Machine check PAL"
ALIGN_BLOCK
//+
//sys$machine_check
// A machine_check trap has occurred. The Icache has been flushed.
//
//-
EXPORT(sys_machine_check)
// Need to fill up the refill buffer (32 instructions) and
// then flush the Icache again.
// Also, due to possible 2nd Cbox register file write for
// uncorrectable errors, no register file read or write for 7 cycles.
nop
mtpr r0, pt0 // Stash for scratch -- OK if Cbox overwrites r0 later
nop
nop
nop
nop
nop
nop
nop
nop
// 10 instructions// 5 cycles
nop
nop
nop
nop
// Register file can now be written
lda r0, scb_v_procmchk(r31) // SCB vector
mfpr r13, pt_mces // Get MCES
sll r0, 16, r0 // Move SCBv to correct position
// bis r13, #<1@mces$v_mchk>, r14 // Set MCES<MCHK> bit
bis r13, BIT(mces_v_mchk), r14 // Set MCES<MCHK> bit
zap r14, 0x3C, r14 // Clear mchk_code word and SCBv word
mtpr r14, pt_mces
// 20 instructions
nop
or r14, r0, r14 // Insert new SCB vector
lda r0, mchk_c_proc_hrd_error(r31) // MCHK code
mfpr r12, exc_addr
sll r0, 32, r0 // Move MCHK code to correct position
mtpr r4, pt4
or r14, r0, r14 // Insert new MCHK code
mtpr r14, pt_misc // Store updated MCES, MCHK code, and SCBv
ldah r14, 0xfff0(r31)
mtpr r1, pt1 // Stash for scratch - 30 instructions
zap r14, 0xE0, r14 // Get Cbox IPR base
mtpr r12, pt10 // Stash exc_addr
mtpr r31, ic_flush_ctl // Second Icache flush, now it is really flushed.
blbs r13, sys_double_machine_check // MCHK halt if double machine check
mtpr r6, pt6
mtpr r5, pt5
// Look for the powerfail cases here....
mfpr r4, isr
srl r4, isr_v_pfl, r4
blbc r4, sys_mchk_collect_iprs // skip if no powerfail interrupt pending
lda r4, 0xffc4(r31) // get GBUS$MISCR address bits
sll r4, 24, r4 // shift to proper position
ldqp r4, 0(r4) // read GBUS$MISCR
srl r4, 5, r4 // isolate bit <5>
blbc r4, sys_mchk_collect_iprs // skip if already cleared
// No missed CFAIL mchk
lda r5, 0xffc7(r31) // get GBUS$SERNUM address bits
sll r5, 24, r5 // shift to proper position
lda r6, 0x40(r31) // get bit <6> mask
ldqp r4, 0(r5) // read GBUS$SERNUM
or r4, r6, r6 // set bit <6>
stqp r6, 0(r5) // clear GBUS$SERNUM<6>
mb
mb
//+
// Start to collect the IPRs. Common entry point for mchk flows.
//
// Current state:
// pt0 - saved r0
// pt1 - saved r1
// pt4 - saved r4
// pt5 - saved r5
// pt6 - saved r6
// pt10 - saved exc_addr
// pt_misc<47:32> - mchk code
// pt_misc<31:16> - scb vector
// r14 - base of Cbox IPRs in IO space
// r0, r1, r4, r5, r6, r12, r13, r25 - available
// r8, r9, r10 - available as all loads are physical
// MCES<mchk> is set
//
//-
EXPORT(sys_mchk_collect_iprs)
mb // MB before reading Scache IPRs
mfpr r1, icperr_stat
mfpr r8, dcperr_stat
mtpr r31, dc_flush // Flush the Dcache
mfpr r31, pt0 // Pad Mbox instructions from dc_flush
mfpr r31, pt0
nop
nop
ldqp r9, sc_addr(r14) // SC_ADDR IPR
bis r9, r31, r31 // Touch ld to make sure it completes before
// read of SC_STAT
ldqp r10, sc_stat(r14) // SC_STAT, also unlocks SC_ADDR
ldqp r12, ei_addr(r14) // EI_ADDR IPR
ldqp r13, bc_tag_addr(r14) // BC_TAG_ADDR IPR
ldqp r0, fill_syn(r14) // FILL_SYN IPR
bis r12, r13, r31 // Touch lds to make sure they complete before reading EI_STAT
bis r0, r0, r31 // Touch lds to make sure they complete before reading EI_STAT
ldqp r25, ei_stat(r14) // EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
ldqp r31, ei_stat(r14) // Read again to insure it is unlocked
//+
// Look for nonretryable cases
// In this segment:
// r5<0> = 1 means retryable
// r4, r6, and r14 are available for scratch
//
//-
bis r31, r31, r5 // Clear local retryable flag
srl r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits to low bits
lda r4, 1(r31)
sll r4, icperr_stat_v_tmr, r4
and r1, r4, r4 // Timeout reset
bne r4, sys_cpu_mchk_not_retryable
and r8, BIT(dcperr_stat_v_lock), r4 // DCache parity error locked
bne r4, sys_cpu_mchk_not_retryable
lda r4, 1(r31)
sll r4, sc_stat_v_sc_scnd_err, r4
and r10, r4, r4 // 2nd Scache error occurred
bne r4, sys_cpu_mchk_not_retryable
bis r31, 0xa3, r4 // EI_STAT Bcache Tag Parity Error, Bcache Tag Control
// Parity Error, Interface Parity Error, 2nd Error
and r25, r4, r4
bne r4, sys_cpu_mchk_not_retryable
// bis r31, #<1@<ei_stat$v_unc_ecc_err-ei_stat$v_bc_tperr>>, r4
bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
and r25, r4, r4 // Isolate the Uncorrectable Error Bit
// bis r31, #<1@<ei_stat$v_fil_ird-ei_stat$v_bc_tperr>>, r6
bis r31, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r6 // Isolate the Iread bit
cmovne r6, 0, r4 // r4 = 0 if IRD or if No Uncorrectable Error
bne r4, sys_cpu_mchk_not_retryable
lda r4, 7(r31)
and r10, r4, r4 // Isolate the Scache Tag Parity Error bits
bne r4, sys_cpu_mchk_not_retryable // All Scache Tag PEs are not retryable
lda r4, 0x7f8(r31)
and r10, r4, r4 // Isolate the Scache Data Parity Error bits
srl r10, sc_stat_v_cbox_cmd, r6
and r6, 0x1f, r6 // Isolate Scache Command field
subq r6, 1, r6 // Scache Iread command = 1
cmoveq r6, 0, r4 // r4 = 0 if IRD or if No Parity Error
bne r4, sys_cpu_mchk_not_retryable
// Look for the system unretryable cases here....
mfpr r4, isr // mchk_interrupt pin asserted
srl r4, isr_v_mck, r4
blbs r4, sys_cpu_mchk_not_retryable
//+
// Look for retryable cases
// In this segment:
// r5<0> = 1 means retryable
// r6 - holds the mchk code
// r4 and r14 are available for scratch
//
//-
// Within the chip, the retryable cases are Istream errors
lda r4, 3(r31)
sll r4, icperr_stat_v_dpe, r4
and r1, r4, r4
cmovne r4, 1, r5 // Retryable if just Icache parity error
lda r4, 0x7f8(r31)
and r10, r4, r4 // Isolate the Scache Data Parity Error bits
srl r10, sc_stat_v_cbox_cmd, r14
and r14, 0x1f, r14 // Isolate Scache Command field
subq r14, 1, r14 // Scache Iread command = 1
cmovne r4, 1, r4 // r4 = 1 if Scache data parity error bit set
cmovne r14, 0, r4 // r4 = 1 if Scache PE and Iread
bis r4, r5, r5 // Accumulate
bis r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
and r25, r4, r4 // Isolate the Uncorrectable Error Bit
and r25, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r14 // Isolate the Iread bit
cmovne r4, 1, r4 // r4 = 1 if uncorr error
cmoveq r14, 0, r4 // r4 = 1 if uncorr and Iread
bis r4, r5, r5 // Accumulate
mfpr r6, pt_misc
extwl r6, 4, r6 // Fetch mchk code
bic r6, 1, r6 // Clear flag from interrupt flow
cmovne r5, mchk_c_retryable_ird, r6 // Set mchk code
// In the system, the retryable cases are ...
// (code here handles beh model read NXM)
#if beh_model != 0
// .if ne beh_model
ldah r4, 0xC000(r31) // Get base of demon space
lda r4, 0x550(r4) // Add NXM demon flag offset
ldqp r4, 0(r4) // Read the demon register
lda r14, mchk_c_read_nxm(r31)
cmovlbs r4, r14, r6 // Set mchk code if read NXM
cmovlbs r4, 1, r4
bis r4, r5, r5 // Accumulate retry bit
#endif
//+
// Write the logout frame
//
// Current state:
// r0 - fill_syn
// r1 - icperr_stat
// r4 - available
// r5<0> - retry flag
// r6 - mchk code
// r8 - dcperr_stat
// r9 - sc_addr
// r10 - sc_stat
// r12 - ei_addr
// r13 - bc_tag_addr
// r14 - available
// r25 - ei_stat (shifted)
// pt0 - saved r0
// pt1 - saved r1
// pt4 - saved r4
// pt5 - saved r5
// pt6 - saved r6
// pt10 - saved exc_addr
//
//-
sys_mchk_write_logout_frame:
// Get base of the logout area.
GET_IMPURE(r14) // addr of per-cpu impure area
GET_ADDR(r14,pal_logout_area+mchk_mchk_base,r14)
// Write the first 2 quadwords of the logout area:
sll r5, 63, r5 // Move retry flag to bit 63
lda r4, mchk_size(r5) // Combine retry flag and frame size
stqp r4, mchk_flag(r14) // store flag/frame size
lda r4, mchk_sys_base(r31) // sys offset
sll r4, 32, r4
lda r4, mchk_cpu_base(r4) // cpu offset
stqp r4, mchk_offsets(r14) // store sys offset/cpu offset into logout frame
//+
// Write the mchk code to the logout area
// Write error IPRs already fetched to the logout area
// Restore some GPRs from PALtemps
//-
mfpr r5, pt5
stqp r6, mchk_mchk_code(r14)
mfpr r4, pt4
stqp r1, mchk_ic_perr_stat(r14)
mfpr r6, pt6
stqp r8, mchk_dc_perr_stat(r14)
mfpr r1, pt1
stqp r9, mchk_sc_addr(r14)
stqp r10, mchk_sc_stat(r14)
stqp r12, mchk_ei_addr(r14)
stqp r13, mchk_bc_tag_addr(r14)
stqp r0, mchk_fill_syn(r14)
mfpr r0, pt0
sll r25, ei_stat_v_bc_tperr, r25 // Move EI_STAT status bits back to expected position
// retrieve lower 28 bits again from ei_stat and restore before storing to logout frame
ldah r13, 0xfff0(r31)
zapnot r13, 0x1f, r13
ldqp r13, ei_stat(r13)
sll r13, 64-ei_stat_v_bc_tperr, r13
srl r13, 64-ei_stat_v_bc_tperr, r13
or r25, r13, r25
stqp r25, mchk_ei_stat(r14)
//+
// complete the CPU-specific part of the logout frame
//-
#ifndef SIMOS
// cant' assemble.Where is the macro ?
mchk_logout mm_stat
mchk_logout va // Unlocks VA and MM_STAT
mchk_logout isr
mchk_logout icsr
mchk_logout pal_base
mchk_logout exc_mask
mchk_logout exc_sum
#endif
ldah r13, 0xfff0(r31)
zap r13, 0xE0, r13 // Get Cbox IPR base
ldqp r13, ld_lock(r13) // Get ld_lock IPR
stqp r13, mchk_ld_lock(r14) // and stash it in the frame
//+
// complete the PAL-specific part of the logout frame
//-
#ifdef vms
t = 0
.repeat 24
pt_mchk_logout \t
t = t + 1
.endr
#endif
#ifndef SIMOS
//can't assemble ?
pt_mchk_logout 0
pt_mchk_logout 1
pt_mchk_logout 2
pt_mchk_logout 3
pt_mchk_logout 4
pt_mchk_logout 5
pt_mchk_logout 6
pt_mchk_logout 7
pt_mchk_logout 8
pt_mchk_logout 9
pt_mchk_logout 10
pt_mchk_logout 11
pt_mchk_logout 12
pt_mchk_logout 13
pt_mchk_logout 14
pt_mchk_logout 15
pt_mchk_logout 16
pt_mchk_logout 17
pt_mchk_logout 18
pt_mchk_logout 19
pt_mchk_logout 20
pt_mchk_logout 21
pt_mchk_logout 22
pt_mchk_logout 23
#endif
//+
// Log system specific info here
//-
#if alpha_fw != 0
// .if ne alpha_fw
storeTLEP_:
lda r13, 0xffc4(r31) // Get GBUS$MISCR address
sll r13, 24, r13
ldqp r13, 0(r13) // Read GBUS$MISCR
sll r13, 16, r13 // shift up to proper field
mfpr r8, pt_whami // get our node id
extbl r8, 1, r8 // shift to bit 0
or r13, r8, r13 // merge MISCR and WHAMI
stlp r13, mchk$gbus(r14) // write to logout area
srl r8, 1, r8 // shift off cpu number
Get_TLSB_Node_Address r8,r13 // compute our nodespace address
OSFmchk_TLEPstore tldev, tlsb=1
OSFmchk_TLEPstore tlber, tlsb=1, clr=1
OSFmchk_TLEPstore tlcnr, tlsb=1
OSFmchk_TLEPstore tlvid, tlsb=1
OSFmchk_TLEPstore tlesr0, tlsb=1, clr=1
OSFmchk_TLEPstore tlesr1, tlsb=1, clr=1
OSFmchk_TLEPstore tlesr2, tlsb=1, clr=1
OSFmchk_TLEPstore tlesr3, tlsb=1, clr=1
OSFmchk_TLEPstore tlmodconfig
OSFmchk_TLEPstore tlepaerr, clr=1
OSFmchk_TLEPstore tlepderr, clr=1
OSFmchk_TLEPstore tlepmerr, clr=1
OSFmchk_TLEPstore tlintrmask0
OSFmchk_TLEPstore tlintrmask1
OSFmchk_TLEPstore tlintrsum0
OSFmchk_TLEPstore tlintrsum1
OSFmchk_TLEPstore tlep_vmg
// .endc
#endif /*alpha_fw != 0 */
// Unlock IPRs
lda r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
mtpr r8, dcperr_stat // Clear Dcache parity error status
lda r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31)
mtpr r8, icperr_stat // Clear Icache parity error & timeout status
1: ldqp r8, mchk_ic_perr_stat(r14) // get ICPERR_STAT value
GET_ADDR(r0,0x1800,r31) // get ICPERR_STAT value
and r0, r8, r0 // compare
beq r0, 2f // check next case if nothing set
lda r0, mchk_c_retryable_ird(r31) // set new MCHK code
br r31, do_670 // setup new vector
2: ldqp r8, mchk_dc_perr_stat(r14) // get DCPERR_STAT value
GET_ADDR(r0,0x3f,r31) // get DCPERR_STAT value
and r0, r8, r0 // compare
beq r0, 3f // check next case if nothing set
lda r0, mchk_c_dcperr(r31) // set new MCHK code
br r31, do_670 // setup new vector
3: ldqp r8, mchk_sc_stat(r14) // get SC_STAT value
GET_ADDR(r0,0x107ff,r31) // get SC_STAT value
and r0, r8, r0 // compare
beq r0, 4f // check next case if nothing set
lda r0, mchk_c_scperr(r31) // set new MCHK code
br r31, do_670 // setup new vector
4: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
GET_ADDR(r0,0x30000000,r31) // get EI_STAT value
and r0, r8, r0 // compare
beq r0, 5f // check next case if nothing set
lda r0, mchk_c_bcperr(r31) // set new MCHK code
br r31, do_670 // setup new vector
5: ldlp r8, mchk_tlber(r14) // get TLBER value
GET_ADDR(r0,0xfe01,r31) // get high TLBER mask value
sll r0, 16, r0 // shift into proper position
GET_ADDR(r1,0x03ff,r31) // get low TLBER mask value
or r0, r1, r0 // merge mask values
and r0, r8, r0 // compare
beq r0, 6f // check next case if nothing set
GET_ADDR(r0, 0xfff0, r31) // set new MCHK code
br r31, do_660 // setup new vector
6: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
GET_ADDR(r0,0xff7f,r31) // get TLEPAERR mask value
and r0, r8, r0 // compare
beq r0, 7f // check next case if nothing set
GET_ADDR(r0, 0xfffa, r31) // set new MCHK code
br r31, do_660 // setup new vector
7: ldlp r8, mchk_tlepderr(r14) // get TLEPDERR value
GET_ADDR(r0,0x7,r31) // get TLEPDERR mask value
and r0, r8, r0 // compare
beq r0, 8f // check next case if nothing set
GET_ADDR(r0, 0xfffb, r31) // set new MCHK code
br r31, do_660 // setup new vector
8: ldlp r8, mchk_tlepmerr(r14) // get TLEPMERR value
GET_ADDR(r0,0x3f,r31) // get TLEPMERR mask value
and r0, r8, r0 // compare
beq r0, 9f // check next case if nothing set
GET_ADDR(r0, 0xfffc, r31) // set new MCHK code
br r31, do_660 // setup new vector
9: ldqp r8, mchk_ei_stat(r14) // get EI_STAT value
GET_ADDR(r0,0xb,r31) // get EI_STAT mask value
sll r0, 32, r0 // shift to upper lw
and r0, r8, r0 // compare
beq r0, 1f // check next case if nothing set
GET_ADDR(r0,0xfffd,r31) // set new MCHK code
br r31, do_660 // setup new vector
1: ldlp r8, mchk_tlepaerr(r14) // get TLEPAERR value
GET_ADDR(r0,0x80,r31) // get TLEPAERR mask value
and r0, r8, r0 // compare
beq r0, cont_logout_frame // check next case if nothing set
GET_ADDR(r0, 0xfffe, r31) // set new MCHK code
br r31, do_660 // setup new vector
do_670: lda r8, scb_v_procmchk(r31) // SCB vector
br r31, do_6x0_cont
do_660: lda r8, scb_v_sysmchk(r31) // SCB vector
do_6x0_cont:
sll r8, 16, r8 // shift to proper position
mfpr r1, pt_misc // fetch current pt_misc
GET_ADDR(r4,0xffff, r31) // mask for vector field
sll r4, 16, r4 // shift to proper position
bic r1, r4, r1 // clear out old vector field
or r1, r8, r1 // merge in new vector
mtpr r1, pt_misc // save new vector field
stlp r0, mchk_mchk_code(r14) // save new mchk code
cont_logout_frame:
// Restore some GPRs from PALtemps
mfpr r0, pt0
mfpr r1, pt1
mfpr r4, pt4
mfpr r12, pt10 // fetch original PC
blbs r12, sys_machine_check_while_in_pal // MCHK halt if machine check in pal
//XXXbugnion pvc_jsr armc, bsr=1
bsr r12, sys_arith_and_mchk // go check for and deal with arith trap
mtpr r31, exc_sum // Clear Exception Summary
mfpr r25, pt10 // write exc_addr after arith_and_mchk to pickup new pc
stqp r25, mchk_exc_addr(r14)
//+
// Set up the km trap
//-
sys_post_mchk_trap:
mfpr r25, pt_misc // Check for flag from mchk interrupt
extwl r25, 4, r25
blbs r25, sys_mchk_stack_done // Stack from already pushed if from interrupt flow
bis r14, r31, r12 // stash pointer to logout area
mfpr r14, pt10 // get exc_addr
sll r11, 63-3, r25 // get mode to msb
bge r25, 3f
mtpr r31, dtb_cm
mtpr r31, ev5__ps
mtpr r30, pt_usp // save user stack
mfpr r30, pt_ksp
3:
lda sp, 0-osfsf_c_size(sp) // allocate stack space
nop
stq r18, osfsf_a2(sp) // a2
stq r11, osfsf_ps(sp) // save ps
stq r14, osfsf_pc(sp) // save pc
mfpr r25, pt_entint // get the VA of the interrupt routine
stq r16, osfsf_a0(sp) // a0
lda r16, osfint_c_mchk(r31) // flag as mchk in a0
stq r17, osfsf_a1(sp) // a1
mfpr r17, pt_misc // get vector
stq r29, osfsf_gp(sp) // old gp
mtpr r25, exc_addr //
or r31, 7, r11 // get new ps (km, high ipl)
subq r31, 1, r18 // get a -1
extwl r17, 2, r17 // a1 <- interrupt vector
bis r31, ipl_machine_check, r25
mtpr r25, ipl // Set internal ipl
srl r18, 42, r18 // shift off low bits of kseg addr
sll r18, 42, r18 // shift back into position
mfpr r29, pt_kgp // get the kern r29
or r12, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
hw_rei_spe // out to interrupt dispatch routine
//+
// The stack is pushed. Load up a0,a1,a2 and vector via entInt
//
//-
ALIGN_BRANCH
sys_mchk_stack_done:
lda r16, osfint_c_mchk(r31) // flag as mchk/crd in a0
lda r17, scb_v_sysmchk(r31) // a1 <- interrupt vector
subq r31, 1, r18 // get a -1
mfpr r25, pt_entInt
srl r18, 42, r18 // shift off low bits of kseg addr
mtpr r25, exc_addr // load interrupt vector
sll r18, 42, r18 // shift back into position
or r14, r18, r18 // EV4 algorithm - pass pointer to mchk frame as kseg address
hw_rei_spe // done
ALIGN_BRANCH
sys_cpu_mchk_not_retryable:
mfpr r6, pt_misc
extwl r6, 4, r6 // Fetch mchk code
br r31, sys_mchk_write_logout_frame //
//+
//sys$double_machine_check - a machine check was started, but MCES<MCHK> was
// already set. We will now double machine check halt.
//
// pt0 - old R0
//
//+
EXPORT(sys_double_machine_check)
#ifndef SIMOS
pvc$jsr updpcb, bsr=1
bsr r0, pal_update_pcb // update the pcb
#endif
lda r0, hlt_c_dbl_mchk(r31)
br r31, sys_enter_console
//+
//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to
// a PAL PC. We will now machine check halt.
//
// pt0 - old R0
//
//+
sys_machine_check_while_in_pal:
stqp r12, mchk_exc_addr(r14) // exc_addr has not yet been written
#ifndef SIMOS
pvc$jsr updpcb, bsr=1
bsr r0, pal_update_pcb // update the pcb
#endif
lda r0, hlt_c_mchk_from_pal(r31)
br r31, sys_enter_console
//ARITH and MCHK
// Check for arithmetic errors and build trap frame,
// but don't post the trap.
// on entry:
// pt10 - exc_addr
// r12 - return address
// r14 - logout frame pointer
// r13 - available
// r8,r9,r10 - available except across stq's
// pt0,1,6 - available
//
// on exit:
// pt10 - new exc_addr
// r17 = exc_mask
// r16 = exc_sum
// r14 - logout frame pointer
//
ALIGN_BRANCH
sys_arith_and_mchk:
mfpr r13, ev5__exc_sum
srl r13, exc_sum_v_swc, r13
bne r13, handle_arith_and_mchk
// XXX bugnion pvc$jsr armc, bsr=1, dest=1
ret r31, (r12) // return if no outstanding arithmetic error
handle_arith_and_mchk:
mtpr r31, ev5__dtb_cm // Set Mbox current mode to kernel -
// no virt ref for next 2 cycles
mtpr r14, pt0
mtpr r1, pt1 // get a scratch reg
and r11, osfps_m_mode, r1 // get mode bit
bis r11, r31, r25 // save ps
beq r1, 1f // if zero we are in kern now
bis r31, r31, r25 // set the new ps
mtpr r30, pt_usp // save user stack
mfpr r30, pt_ksp // get kern stack
1:
mfpr r14, exc_addr // get pc into r14 in case stack writes fault
lda sp, 0-osfsf_c_size(sp) // allocate stack space
mtpr r31, ev5__ps // Set Ibox current mode to kernel
mfpr r1, pt_entArith
stq r14, osfsf_pc(sp) // save pc
stq r17, osfsf_a1(sp)
mfpr r17, ev5__exc_mask // Get exception register mask IPR - no mtpr exc_sum in next cycle
stq r29, osfsf_gp(sp)
stq r16, osfsf_a0(sp) // save regs
bis r13, r31, r16 // move exc_sum to r16
stq r18, osfsf_a2(sp)
stq r11, osfsf_ps(sp) // save ps
mfpr r29, pt_kgp // get the kern gp
mfpr r14, pt0 // restore logout frame pointer from pt0
bis r25, r31, r11 // set new ps
mtpr r1, pt10 // Set new PC
mfpr r1, pt1
// XXX bugnion pvc$jsr armc, bsr=1, dest=1
ret r31, (r12) // return if no outstanding arithmetic error
// .sbttl "SYS$ENTER_CONSOLE - Common PALcode for ENTERING console"
ALIGN_BLOCK
// SYS$enter_console
//
// Entry:
// Entered when PAL wants to enter the console.
// usually as the result of a HALT instruction or button,
// or catastrophic error.
//
// Regs on entry...
//
// R0 = halt code
// pt0 <- r0
//
// Function:
//
// Save all readable machine state, and "call" the console
//
// Returns:
//
//
// Notes:
//
// In these routines, once the save state routine has been executed,
// the remainder of the registers become scratchable, as the only
// "valid" copy of them is the "saved" copy.
//
// Any registers or PTs that are modified before calling the save
// routine will have there data lost. The code below will save all
// state, but will loose pt 0,4,5.
//
//-
EXPORT(sys_enter_console)
mtpr r1, pt4
mtpr r3, pt5
#ifdef SIMOS
subq r31, 1, r1
sll r1, 42, r1
ldah r1, 1(r1)
#else /* SIMOS */
lda r3, pal_enter_console_ptr(r31) //find stored vector
ldqp r1, 0(r3)
#endif /* SIMOS */
#ifdef SIMOS
/* taken from scrmax, seems like the obvious thing to do */
mtpr r1, exc_addr
mfpr r1, pt4
mfpr r3, pt5
STALL
STALL
hw_rei_stall
#else
pvc$violate 1007
jmp r31, (r1) // off to common routine
#endif
// .sbttl "SYS$EXIT_CONSOLE - Common PALcode for ENTERING console"
//+
// sys$exit_console
//
// Entry:
// Entered when console wants to reenter PAL.
// usually as the result of a CONTINUE.
//
//
// Regs' on entry...
//
//
// Function:
//
// Restore all readable machine state, and return to user code.
//
//
//
//-
ALIGN_BLOCK
sys_exit_console:
//Disable physical mode:
#if enable_physical_console != 0
// .if ne enable_physical_console
mfpr r25, pt_ptbr
bic r25, 1, r25 // clear physical console flag
mtpr r25, pt_ptbr
#endif
GET_IMPURE(r1)
// clear lock and intr_flags prior to leaving console
rc r31 // clear intr_flag
// lock flag cleared by restore_state
#ifndef SIMOS
pvc$jsr rststa, bsr=1
bsr r3, pal_restore_state // go restore all state
// note, R1 and R3 are NOT restored
// by restore_state.
#endif
// TB's have been flushed
ldqp r3, (cns_gpr+(8*3))(r1) // restore r3
ldqp r1, (cns_gpr+8)(r1) // restore r1
hw_rei_stall // back to user
#if turbo_pcia_intr_fix != 0
// .if ne turbo_pcia_intr_fix
check_pcia_intr:
mfpr r14, pt14 // fetch saved PCIA interrupt info
beq r14, check_done // don't bother checking if no info
mfpr r13, ipl // check the current IPL
bic r13, 3, r25 // isolate ipl<5:2>
cmpeq r25, 0x14, r25 // is it an I/O interrupt?
beq r25, check_done // no, return
and r13, 3, r25 // get I/O interrupt index
extbl r14, r25, r13 // extract info for this interrupt
beq r13, check_done // if no info, return
// This is an RTI from a PCIA interrupt
lda r12, 1(r31) // get initial bit mask
sll r12, r25, r25 // shift to select interrupt index
zap r14, r25, r14 // clear out info from this interrupt
mtpr r14, pt14 // and save it
and r13, 3, r25 // isolate HPC field
subq r25, 1, r25 // subtract 1 to get HPC number
srl r13, 2, r13 // generate base register address
sll r13, 6, r13 // get slot/hose address bits
lda r13, 0x38(r13) // insert other high bits
sll r13, 28, r13 // shift high bits into position
// Read the IPROGx register
sll r25, 21, r14 // HPC address bit position
or r13, r14, r14 // add in upper bits
lda r14, 0x400(r14) // add in lower bits
ldqp r14, 0(r14) // read IPROG
srl r14, 4, r12 // check the In Progress bit
blbc r12, 1f // skip if none in progress
and r14, 0xf, r14 // isolate interrupt source
lda r12, 1(r31) // make initial mask
sll r12, r14, r14 // shift to make new intr source mask
br r31, 2f
// Write the SMPLIRQx register
1: or r31, r31, r14 // default interrupt source mask
2: GET_ADDR(r12, 0xffff, r31) // default SMPLIRQx data
bic r12, r14, r12 // clear any interrupts in progres
//orig lda r14, <0xbffc@-2>(r31) // get register address bits
lda r14,(0xbffc>>2)(r31)
sll r14, 10, r14 // shift into position
or r14, r13, r14 // add in upper bits
sll r25, 8, r25 // shift HPC number into position
or r14, r25, r14 // add in lower bits
stqp r12, 0(r14) // write SMPLIRQx register
mb
ldqp r12, 0(r14) // read it back
bis r12, r12, r12 // touch register to insure completion
check_done: // do these now and return
lda r25, osfsf_c_size(sp) // get updated sp
bis r25, r31, r14 // touch r14,r25 to stall mf exc_addr
br r31, pcia_check_return
#endif
// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only
ALIGN_128
kludge_initial_pcbb: // PCB is 128 bytes long
// .repeat 16
// .quad 0
// .endr
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
// .sbttl "SET_SC_BC_CTL subroutine"
//
// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache
// There must be no outstanding memory references -- istream or dstream -- when
// these registers are written. EV5 prefetcher is difficult to turn off. So,
// this routine needs to be exactly 32 instructions long// the final jmp must
// be in the last octaword of a page (prefetcher doesn't go across page)
//
//
// Register expecations:
// r0 base address of CBOX iprs
// r5 value to set sc_ctl to (flush bit is added in)
// r6 value to set bc_ctl to
// r7 value to set bc_config to
// r10 return address
// r19 old sc_ctl value
// r20 old value of bc_ctl
// r21 old value of bc_config
// r23 flush scache flag
// Register usage:
// r17 sc_ctl with flush bit cleared
// r22 loop address
//
//
#ifndef SIMOS
align_page <32*4> // puts start of routine at next page boundary minus 32 longwords.
#endif
set_sc_bc_ctl:
#ifndef SIMOS
br r22, sc_ctl_loop //this branch must be in the same 4 instruction block as it's dest
sc_ctl_loop:
// XXX bugnion pvc$jsr scloop, dest=1
mb
mb
bis r5, r23, r5 //r5 <- same sc_ctl with flush bit set (if flag set in r23)
stqp r19, ev5__sc_ctl(r0) // write sc_ctl
stqp r20, ev5__bc_ctl(r0) // write bc_ctl
bis r31, r6, r20 // update r20 with new bc_ctl for 2nd time through loop
stqp r21, bc_config(r0) // write bc_config register
bis r31, r7, r21 // update r21 with new bc_config for 2nd time through loop
bic r19, BIT(sc_ctl_v_sc_flush), r17 //r17 <- same sc_ctl without flush bit set
//NOTE: only works because flush bit is in lower 16 bits
wmb // don't merge with other writes
stqp r17, ev5__sc_ctl(r0) // write sc_ctl without flush bit
ldqp r17, ev5__sc_ctl(r0) // read sc_ctl
bis r17, r17, r17 // stall until the data comes back
bis r31, r5, r19 // update r19 with new sc_ctl for 2nd time through loop
// fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop
t = 0
.repeat 15
unop
t = t + 1
.endr
$opdef mnemonic= myjmp, -
format= <custom=iregister, iregister, branch_offset>, -
encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3>
// XXXbugnion pvc$jsr scloop
myjmp r22,r22,sc_ctl_loop // first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead
// of straight) // r22 gets sc_ctl_done
// 2nd time, code continues at sc_ctl_done (I hope)
sc_ctl_done:
// XXX bugnion pvc$jsr scloop, dest=1
// XXX bugnion pvc$jsr scbcctl
#endif /*SIMOS*/
ret r31, (r10) // return to where we came from
.end
Reference in a new issue View git blame Copy permalink