gem5/configs/example/apu_se.py
David Hashe d1abc287f6 config: KVM acceleration for apu_se.py
Add support for using KVM to accelerate APU simulations. The intended use
case is to fast-forward through runtime initialization until the first
kernel launch.
2016-08-22 11:43:44 -04:00

577 lines
24 KiB
Python

#
# Copyright (c) 2015 Advanced Micro Devices, Inc.
# All rights reserved.
#
# For use for simulation and test purposes only
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# Author: Sooraj Puthoor
#
import optparse, os, re
import math
import glob
import inspect
import m5
from m5.objects import *
from m5.util import addToPath
addToPath('../ruby')
addToPath('../common')
addToPath('../topologies')
import Options
import Ruby
import Simulation
import GPUTLBOptions, GPUTLBConfig
########################## Script Options ########################
def setOption(parser, opt_str, value = 1):
# check to make sure the option actually exists
if not parser.has_option(opt_str):
raise Exception("cannot find %s in list of possible options" % opt_str)
opt = parser.get_option(opt_str)
# set the value
exec("parser.values.%s = %s" % (opt.dest, value))
def getOption(parser, opt_str):
# check to make sure the option actually exists
if not parser.has_option(opt_str):
raise Exception("cannot find %s in list of possible options" % opt_str)
opt = parser.get_option(opt_str)
# get the value
exec("return_value = parser.values.%s" % opt.dest)
return return_value
# Adding script options
parser = optparse.OptionParser()
Options.addCommonOptions(parser)
Options.addSEOptions(parser)
parser.add_option("--cpu-only-mode", action="store_true", default=False,
help="APU mode. Used to take care of problems in "\
"Ruby.py while running APU protocols")
parser.add_option("-k", "--kernel-files",
help="file(s) containing GPU kernel code (colon separated)")
parser.add_option("-u", "--num-compute-units", type="int", default=1,
help="number of GPU compute units"),
parser.add_option("--num-cp", type="int", default=0,
help="Number of GPU Command Processors (CP)")
parser.add_option("--benchmark-root", help="Root of benchmark directory tree")
# not super important now, but to avoid putting the number 4 everywhere, make
# it an option/knob
parser.add_option("--cu-per-sqc", type="int", default=4, help="number of CUs" \
"sharing an SQC (icache, and thus icache TLB)")
parser.add_option("--simds-per-cu", type="int", default=4, help="SIMD units" \
"per CU")
parser.add_option("--wf-size", type="int", default=64,
help="Wavefront size(in workitems)")
parser.add_option("--sp-bypass-path-length", type="int", default=4, \
help="Number of stages of bypass path in vector ALU for Single Precision ops")
parser.add_option("--dp-bypass-path-length", type="int", default=4, \
help="Number of stages of bypass path in vector ALU for Double Precision ops")
# issue period per SIMD unit: number of cycles before issuing another vector
parser.add_option("--issue-period", type="int", default=4, \
help="Number of cycles per vector instruction issue period")
parser.add_option("--glbmem-wr-bus-width", type="int", default=32, \
help="VGPR to Coalescer (Global Memory) data bus width in bytes")
parser.add_option("--glbmem-rd-bus-width", type="int", default=32, \
help="Coalescer to VGPR (Global Memory) data bus width in bytes")
# Currently we only support 1 local memory pipe
parser.add_option("--shr-mem-pipes-per-cu", type="int", default=1, \
help="Number of Shared Memory pipelines per CU")
# Currently we only support 1 global memory pipe
parser.add_option("--glb-mem-pipes-per-cu", type="int", default=1, \
help="Number of Global Memory pipelines per CU")
parser.add_option("--wfs-per-simd", type="int", default=10, help="Number of " \
"WF slots per SIMD")
parser.add_option("--vreg-file-size", type="int", default=2048,
help="number of physical vector registers per SIMD")
parser.add_option("--bw-scalor", type="int", default=0,
help="bandwidth scalor for scalability analysis")
parser.add_option("--CPUClock", type="string", default="2GHz",
help="CPU clock")
parser.add_option("--GPUClock", type="string", default="1GHz",
help="GPU clock")
parser.add_option("--cpu-voltage", action="store", type="string",
default='1.0V',
help = """CPU voltage domain""")
parser.add_option("--gpu-voltage", action="store", type="string",
default='1.0V',
help = """CPU voltage domain""")
parser.add_option("--CUExecPolicy", type="string", default="OLDEST-FIRST",
help="WF exec policy (OLDEST-FIRST, ROUND-ROBIN)")
parser.add_option("--xact-cas-mode", action="store_true",
help="enable load_compare mode (transactional CAS)")
parser.add_option("--SegFaultDebug",action="store_true",
help="checks for GPU seg fault before TLB access")
parser.add_option("--FunctionalTLB",action="store_true",
help="Assumes TLB has no latency")
parser.add_option("--LocalMemBarrier",action="store_true",
help="Barrier does not wait for writethroughs to complete")
parser.add_option("--countPages", action="store_true",
help="Count Page Accesses and output in per-CU output files")
parser.add_option("--TLB-prefetch", type="int", help = "prefetch depth for"\
"TLBs")
parser.add_option("--pf-type", type="string", help="type of prefetch: "\
"PF_CU, PF_WF, PF_PHASE, PF_STRIDE")
parser.add_option("--pf-stride", type="int", help="set prefetch stride")
parser.add_option("--numLdsBanks", type="int", default=32,
help="number of physical banks per LDS module")
parser.add_option("--ldsBankConflictPenalty", type="int", default=1,
help="number of cycles per LDS bank conflict")
parser.add_option('--fast-forward-pseudo-op', action='store_true',
help = 'fast forward using kvm until the m5_switchcpu'
' pseudo-op is encountered, then switch cpus. subsequent'
' m5_switchcpu pseudo-ops will toggle back and forth')
Ruby.define_options(parser)
#add TLB options to the parser
GPUTLBOptions.tlb_options(parser)
(options, args) = parser.parse_args()
# The GPU cache coherence protocols only work with the backing store
setOption(parser, "--access-backing-store")
# if benchmark root is specified explicitly, that overrides the search path
if options.benchmark_root:
benchmark_path = [options.benchmark_root]
else:
# Set default benchmark search path to current dir
benchmark_path = ['.']
########################## Sanity Check ########################
# Currently the gpu model requires ruby
if buildEnv['PROTOCOL'] == 'None':
fatal("GPU model requires ruby")
# Currently the gpu model requires only timing or detailed CPU
if not (options.cpu_type == "timing" or
options.cpu_type == "detailed"):
fatal("GPU model requires timing or detailed CPU")
# This file can support multiple compute units
assert(options.num_compute_units >= 1)
# Currently, the sqc (I-Cache of GPU) is shared by
# multiple compute units(CUs). The protocol works just fine
# even if sqc is not shared. Overriding this option here
# so that the user need not explicitly set this (assuming
# sharing sqc is the common usage)
n_cu = options.num_compute_units
num_sqc = int(math.ceil(float(n_cu) / options.cu_per_sqc))
options.num_sqc = num_sqc # pass this to Ruby
########################## Creating the GPU system ########################
# shader is the GPU
shader = Shader(n_wf = options.wfs_per_simd,
clk_domain = SrcClockDomain(
clock = options.GPUClock,
voltage_domain = VoltageDomain(
voltage = options.gpu_voltage)))
# GPU_RfO(Read For Ownership) implements SC/TSO memory model.
# Other GPU protocols implement release consistency at GPU side.
# So, all GPU protocols other than GPU_RfO should make their writes
# visible to the global memory and should read from global memory
# during kernal boundary. The pipeline initiates(or do not initiate)
# the acquire/release operation depending on this impl_kern_boundary_sync
# flag. This flag=true means pipeline initiates a acquire/release operation
# at kernel boundary.
if buildEnv['PROTOCOL'] == 'GPU_RfO':
shader.impl_kern_boundary_sync = False
else:
shader.impl_kern_boundary_sync = True
# Switching off per-lane TLB by default
per_lane = False
if options.TLB_config == "perLane":
per_lane = True
# List of compute units; one GPU can have multiple compute units
compute_units = []
for i in xrange(n_cu):
compute_units.append(ComputeUnit(cu_id = i, perLaneTLB = per_lane,
num_SIMDs = options.simds_per_cu,
wfSize = options.wf_size,
spbypass_pipe_length = options.sp_bypass_path_length,
dpbypass_pipe_length = options.dp_bypass_path_length,
issue_period = options.issue_period,
coalescer_to_vrf_bus_width = \
options.glbmem_rd_bus_width,
vrf_to_coalescer_bus_width = \
options.glbmem_wr_bus_width,
num_global_mem_pipes = \
options.glb_mem_pipes_per_cu,
num_shared_mem_pipes = \
options.shr_mem_pipes_per_cu,
n_wf = options.wfs_per_simd,
execPolicy = options.CUExecPolicy,
xactCasMode = options.xact_cas_mode,
debugSegFault = options.SegFaultDebug,
functionalTLB = options.FunctionalTLB,
localMemBarrier = options.LocalMemBarrier,
countPages = options.countPages,
localDataStore = \
LdsState(banks = options.numLdsBanks,
bankConflictPenalty = \
options.ldsBankConflictPenalty)))
wavefronts = []
vrfs = []
for j in xrange(options.simds_per_cu):
for k in xrange(shader.n_wf):
wavefronts.append(Wavefront(simdId = j, wf_slot_id = k,
wfSize = options.wf_size))
vrfs.append(VectorRegisterFile(simd_id=j,
num_regs_per_simd=options.vreg_file_size))
compute_units[-1].wavefronts = wavefronts
compute_units[-1].vector_register_file = vrfs
if options.TLB_prefetch:
compute_units[-1].prefetch_depth = options.TLB_prefetch
compute_units[-1].prefetch_prev_type = options.pf_type
# attach the LDS and the CU to the bus (actually a Bridge)
compute_units[-1].ldsPort = compute_units[-1].ldsBus.slave
compute_units[-1].ldsBus.master = compute_units[-1].localDataStore.cuPort
# Attach compute units to GPU
shader.CUs = compute_units
########################## Creating the CPU system ########################
options.num_cpus = options.num_cpus
# The shader core will be whatever is after the CPU cores are accounted for
shader_idx = options.num_cpus
# The command processor will be whatever is after the shader is accounted for
cp_idx = shader_idx + 1
cp_list = []
# List of CPUs
cpu_list = []
CpuClass, mem_mode = Simulation.getCPUClass(options.cpu_type)
if CpuClass == AtomicSimpleCPU:
fatal("AtomicSimpleCPU is not supported")
if mem_mode != 'timing':
fatal("Only the timing memory mode is supported")
shader.timing = True
if options.fast_forward and options.fast_forward_pseudo_op:
fatal("Cannot fast-forward based both on the number of instructions and"
" on pseudo-ops")
fast_forward = options.fast_forward or options.fast_forward_pseudo_op
if fast_forward:
FutureCpuClass, future_mem_mode = CpuClass, mem_mode
CpuClass = X86KvmCPU
mem_mode = 'atomic_noncaching'
# Leave shader.timing untouched, because its value only matters at the
# start of the simulation and because we require switching cpus
# *before* the first kernel launch.
future_cpu_list = []
# Initial CPUs to be used during fast-forwarding.
for i in xrange(options.num_cpus):
cpu = CpuClass(cpu_id = i,
clk_domain = SrcClockDomain(
clock = options.CPUClock,
voltage_domain = VoltageDomain(
voltage = options.cpu_voltage)))
cpu_list.append(cpu)
if options.fast_forward:
cpu.max_insts_any_thread = int(options.fast_forward)
if fast_forward:
MainCpuClass = FutureCpuClass
else:
MainCpuClass = CpuClass
# CPs to be used throughout the simulation.
for i in xrange(options.num_cp):
cp = MainCpuClass(cpu_id = options.num_cpus + i,
clk_domain = SrcClockDomain(
clock = options.CPUClock,
voltage_domain = VoltageDomain(
voltage = options.cpu_voltage)))
cp_list.append(cp)
# Main CPUs (to be used after fast-forwarding if fast-forwarding is specified).
for i in xrange(options.num_cpus):
cpu = MainCpuClass(cpu_id = i,
clk_domain = SrcClockDomain(
clock = options.CPUClock,
voltage_domain = VoltageDomain(
voltage = options.cpu_voltage)))
if fast_forward:
cpu.switched_out = True
future_cpu_list.append(cpu)
else:
cpu_list.append(cpu)
########################## Creating the GPU dispatcher ########################
# Dispatcher dispatches work from host CPU to GPU
host_cpu = cpu_list[0]
dispatcher = GpuDispatcher()
########################## Create and assign the workload ########################
# Check for rel_path in elements of base_list using test, returning
# the first full path that satisfies test
def find_path(base_list, rel_path, test):
for base in base_list:
if not base:
# base could be None if environment var not set
continue
full_path = os.path.join(base, rel_path)
if test(full_path):
return full_path
fatal("%s not found in %s" % (rel_path, base_list))
def find_file(base_list, rel_path):
return find_path(base_list, rel_path, os.path.isfile)
executable = find_path(benchmark_path, options.cmd, os.path.exists)
# it's common for a benchmark to be in a directory with the same
# name as the executable, so we handle that automatically
if os.path.isdir(executable):
benchmark_path = [executable]
executable = find_file(benchmark_path, options.cmd)
if options.kernel_files:
kernel_files = [find_file(benchmark_path, f)
for f in options.kernel_files.split(':')]
else:
# if kernel_files is not set, see if there's a unique .asm file
# in the same directory as the executable
kernel_path = os.path.dirname(executable)
kernel_files = glob.glob(os.path.join(kernel_path, '*.asm'))
if kernel_files:
print "Using GPU kernel code file(s)", ",".join(kernel_files)
else:
fatal("Can't locate kernel code (.asm) in " + kernel_path)
# OpenCL driver
driver = ClDriver(filename="hsa", codefile=kernel_files)
for cpu in cpu_list:
cpu.workload = LiveProcess(executable = executable,
cmd = [options.cmd] + options.options.split(),
drivers = [driver])
for cp in cp_list:
cp.workload = host_cpu.workload
if fast_forward:
for i in xrange(len(future_cpu_list)):
future_cpu_list[i].workload = cpu_list[i].workload
########################## Create the overall system ########################
# List of CPUs that must be switched when moving between KVM and simulation
if fast_forward:
switch_cpu_list = \
[(cpu_list[i], future_cpu_list[i]) for i in xrange(options.num_cpus)]
# Full list of processing cores in the system. Note that
# dispatcher is also added to cpu_list although it is
# not a processing element
cpu_list = cpu_list + [shader] + cp_list + [dispatcher]
# creating the overall system
# notice the cpu list is explicitly added as a parameter to System
system = System(cpu = cpu_list,
mem_ranges = [AddrRange(options.mem_size)],
cache_line_size = options.cacheline_size,
mem_mode = mem_mode)
if fast_forward:
system.future_cpu = future_cpu_list
system.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
system.clk_domain = SrcClockDomain(clock = options.sys_clock,
voltage_domain = system.voltage_domain)
if fast_forward:
have_kvm_support = 'BaseKvmCPU' in globals()
if have_kvm_support and buildEnv['TARGET_ISA'] == "x86":
system.vm = KvmVM()
for i in xrange(len(host_cpu.workload)):
host_cpu.workload[i].useArchPT = True
host_cpu.workload[i].kvmInSE = True
else:
fatal("KvmCPU can only be used in SE mode with x86")
# configure the TLB hierarchy
GPUTLBConfig.config_tlb_hierarchy(options, system, shader_idx)
# create Ruby system
system.piobus = IOXBar(width=32, response_latency=0,
frontend_latency=0, forward_latency=0)
Ruby.create_system(options, None, system)
system.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
voltage_domain = system.voltage_domain)
# attach the CPU ports to Ruby
for i in range(options.num_cpus):
ruby_port = system.ruby._cpu_ports[i]
# Create interrupt controller
system.cpu[i].createInterruptController()
# Connect cache port's to ruby
system.cpu[i].icache_port = ruby_port.slave
system.cpu[i].dcache_port = ruby_port.slave
ruby_port.mem_master_port = system.piobus.slave
if buildEnv['TARGET_ISA'] == "x86":
system.cpu[i].interrupts[0].pio = system.piobus.master
system.cpu[i].interrupts[0].int_master = system.piobus.slave
system.cpu[i].interrupts[0].int_slave = system.piobus.master
if fast_forward:
system.cpu[i].itb.walker.port = ruby_port.slave
system.cpu[i].dtb.walker.port = ruby_port.slave
# attach CU ports to Ruby
# Because of the peculiarities of the CP core, you may have 1 CPU but 2
# sequencers and thus 2 _cpu_ports created. Your GPUs shouldn't be
# hooked up until after the CP. To make this script generic, figure out
# the index as below, but note that this assumes there is one sequencer
# per compute unit and one sequencer per SQC for the math to work out
# correctly.
gpu_port_idx = len(system.ruby._cpu_ports) \
- options.num_compute_units - options.num_sqc
gpu_port_idx = gpu_port_idx - options.num_cp * 2
wavefront_size = options.wf_size
for i in xrange(n_cu):
# The pipeline issues wavefront_size number of uncoalesced requests
# in one GPU issue cycle. Hence wavefront_size mem ports.
for j in xrange(wavefront_size):
system.cpu[shader_idx].CUs[i].memory_port[j] = \
system.ruby._cpu_ports[gpu_port_idx].slave[j]
gpu_port_idx += 1
for i in xrange(n_cu):
if i > 0 and not i % options.cu_per_sqc:
print "incrementing idx on ", i
gpu_port_idx += 1
system.cpu[shader_idx].CUs[i].sqc_port = \
system.ruby._cpu_ports[gpu_port_idx].slave
gpu_port_idx = gpu_port_idx + 1
# attach CP ports to Ruby
for i in xrange(options.num_cp):
system.cpu[cp_idx].createInterruptController()
system.cpu[cp_idx].dcache_port = \
system.ruby._cpu_ports[gpu_port_idx + i * 2].slave
system.cpu[cp_idx].icache_port = \
system.ruby._cpu_ports[gpu_port_idx + i * 2 + 1].slave
system.cpu[cp_idx].interrupts[0].pio = system.piobus.master
system.cpu[cp_idx].interrupts[0].int_master = system.piobus.slave
system.cpu[cp_idx].interrupts[0].int_slave = system.piobus.master
cp_idx = cp_idx + 1
# connect dispatcher to the system.piobus
dispatcher.pio = system.piobus.master
dispatcher.dma = system.piobus.slave
################# Connect the CPU and GPU via GPU Dispatcher ###################
# CPU rings the GPU doorbell to notify a pending task
# using this interface.
# And GPU uses this interface to notify the CPU of task completion
# The communcation happens through emulated driver.
# Note this implicit setting of the cpu_pointer, shader_pointer and tlb array
# parameters must be after the explicit setting of the System cpu list
if fast_forward:
shader.cpu_pointer = future_cpu_list[0]
dispatcher.cpu = future_cpu_list[0]
else:
shader.cpu_pointer = host_cpu
dispatcher.cpu = host_cpu
dispatcher.shader_pointer = shader
dispatcher.cl_driver = driver
########################## Start simulation ########################
root = Root(system=system, full_system=False)
m5.ticks.setGlobalFrequency('1THz')
if options.abs_max_tick:
maxtick = options.abs_max_tick
else:
maxtick = m5.MaxTick
# Benchmarks support work item annotations
Simulation.setWorkCountOptions(system, options)
# Checkpointing is not supported by APU model
if (options.checkpoint_dir != None or
options.checkpoint_restore != None):
fatal("Checkpointing not supported by apu model")
checkpoint_dir = None
m5.instantiate(checkpoint_dir)
# Map workload to this address space
host_cpu.workload[0].map(0x10000000, 0x200000000, 4096)
if options.fast_forward:
print "Switch at instruction count: %d" % \
cpu_list[0].max_insts_any_thread
exit_event = m5.simulate(maxtick)
if options.fast_forward:
if exit_event.getCause() == "a thread reached the max instruction count":
m5.switchCpus(system, switch_cpu_list)
print "Switched CPUS @ tick %s" % (m5.curTick())
m5.stats.reset()
exit_event = m5.simulate(maxtick - m5.curTick())
elif options.fast_forward_pseudo_op:
while exit_event.getCause() == "switchcpu":
# If we are switching *to* kvm, then the current stats are meaningful
# Note that we don't do any warmup by default
if type(switch_cpu_list[0][0]) == FutureCpuClass:
print "Dumping stats..."
m5.stats.dump()
m5.switchCpus(system, switch_cpu_list)
print "Switched CPUS @ tick %s" % (m5.curTick())
m5.stats.reset()
# This lets us switch back and forth without keeping a counter
switch_cpu_list = [(x[1], x[0]) for x in switch_cpu_list]
exit_event = m5.simulate(maxtick - m5.curTick())
print "Ticks:", m5.curTick()
print 'Exiting because ', exit_event.getCause()
sys.exit(exit_event.getCode())