cb9e208a4c
This patch bumps the stats to reflect the slight change in how the retry is handled, and also the pruning of some redundant stats.
1347 lines
152 KiB
Plaintext
1347 lines
152 KiB
Plaintext
|
|
---------- Begin Simulation Statistics ----------
|
|
sim_seconds 0.200409 # Number of seconds simulated
|
|
sim_ticks 200409293000 # Number of ticks simulated
|
|
final_tick 4321201686500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
|
|
sim_freq 1000000000000 # Frequency of simulated ticks
|
|
host_inst_rate 11931696 # Simulator instruction rate (inst/s)
|
|
host_op_rate 11931689 # Simulator op (including micro ops) rate (op/s)
|
|
host_tick_rate 4547176905 # Simulator tick rate (ticks/s)
|
|
host_mem_usage 472520 # Number of bytes of host memory used
|
|
host_seconds 44.07 # Real time elapsed on the host
|
|
sim_insts 525869186 # Number of instructions simulated
|
|
sim_ops 525869186 # Number of ops (including micro ops) simulated
|
|
testsys.physmem.bytes_read::cpu.inst 81048564 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::cpu.data 27826180 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::tsunami.ethernet 51169128 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::total 160043872 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_inst_read::cpu.inst 81048564 # Number of instructions bytes read from this memory
|
|
testsys.physmem.bytes_inst_read::total 81048564 # Number of instructions bytes read from this memory
|
|
testsys.physmem.bytes_written::cpu.data 16606324 # Number of bytes written to this memory
|
|
testsys.physmem.bytes_written::tsunami.ethernet 902 # Number of bytes written to this memory
|
|
testsys.physmem.bytes_written::total 16607226 # Number of bytes written to this memory
|
|
testsys.physmem.num_reads::cpu.inst 20262141 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::cpu.data 3842564 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::tsunami.ethernet 2132029 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::total 26236734 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_writes::cpu.data 2258349 # Number of write requests responded to by this memory
|
|
testsys.physmem.num_writes::tsunami.ethernet 31 # Number of write requests responded to by this memory
|
|
testsys.physmem.num_writes::total 2258380 # Number of write requests responded to by this memory
|
|
testsys.physmem.bw_read::cpu.inst 404415198 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::cpu.data 138846755 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::tsunami.ethernet 255323130 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::total 798585084 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_inst_read::cpu.inst 404415198 # Instruction read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_inst_read::total 404415198 # Instruction read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::cpu.data 82862046 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::tsunami.ethernet 4501 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::total 82866547 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_total::cpu.inst 404415198 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::cpu.data 221708801 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::tsunami.ethernet 255327631 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::total 881451630 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.readReqs 0 # Total number of read requests seen
|
|
testsys.physmem.writeReqs 0 # Total number of write requests seen
|
|
testsys.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
|
|
testsys.physmem.bytesRead 0 # Total number of bytes read from memory
|
|
testsys.physmem.bytesWritten 0 # Total number of bytes written to memory
|
|
testsys.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
|
|
testsys.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
|
|
testsys.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
|
|
testsys.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
|
|
testsys.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
|
|
testsys.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
|
|
testsys.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
|
|
testsys.physmem.totGap 0 # Total gap between requests
|
|
testsys.physmem.readPktSize::0 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::1 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::2 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::3 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::4 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::5 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::6 0 # Categorize read packet sizes
|
|
testsys.physmem.writePktSize::0 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::1 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::2 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::3 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::4 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::5 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::6 0 # Categorize write packet sizes
|
|
testsys.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
|
|
testsys.physmem.totQLat 0 # Total cycles spent in queuing delays
|
|
testsys.physmem.totMemAccLat 0 # Sum of mem lat for all requests
|
|
testsys.physmem.totBusLat 0 # Total cycles spent in databus access
|
|
testsys.physmem.totBankLat 0 # Total cycles spent in bank access
|
|
testsys.physmem.avgQLat nan # Average queueing delay per request
|
|
testsys.physmem.avgBankLat nan # Average bank access latency per request
|
|
testsys.physmem.avgBusLat nan # Average bus latency per request
|
|
testsys.physmem.avgMemAccLat nan # Average memory access latency
|
|
testsys.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
|
|
testsys.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
|
|
testsys.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
|
|
testsys.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
|
|
testsys.physmem.peakBW 12800.00 # Theoretical peak bandwidth in MB/s
|
|
testsys.physmem.busUtil 0.00 # Data bus utilization in percentage
|
|
testsys.physmem.avgRdQLen 0.00 # Average read queue length over time
|
|
testsys.physmem.avgWrQLen 0.00 # Average write queue length over time
|
|
testsys.physmem.readRowHits 0 # Number of row buffer hits during reads
|
|
testsys.physmem.writeRowHits 0 # Number of row buffer hits during writes
|
|
testsys.physmem.readRowHitRate nan # Row buffer hit rate for reads
|
|
testsys.physmem.writeRowHitRate nan # Row buffer hit rate for writes
|
|
testsys.physmem.avgGap nan # Average gap between requests
|
|
testsys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
testsys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
testsys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
testsys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
testsys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
testsys.disk0.dma_write_txs 0 # Number of DMA write transactions.
|
|
testsys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
testsys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
testsys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
testsys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
testsys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
testsys.disk2.dma_write_txs 0 # Number of DMA write transactions.
|
|
testsys.cpu.dtb.fetch_hits 0 # ITB hits
|
|
testsys.cpu.dtb.fetch_misses 0 # ITB misses
|
|
testsys.cpu.dtb.fetch_acv 0 # ITB acv
|
|
testsys.cpu.dtb.fetch_accesses 0 # ITB accesses
|
|
testsys.cpu.dtb.read_hits 3916928 # DTB read hits
|
|
testsys.cpu.dtb.read_misses 3287 # DTB read misses
|
|
testsys.cpu.dtb.read_acv 80 # DTB read access violations
|
|
testsys.cpu.dtb.read_accesses 225414 # DTB read accesses
|
|
testsys.cpu.dtb.write_hits 2316846 # DTB write hits
|
|
testsys.cpu.dtb.write_misses 528 # DTB write misses
|
|
testsys.cpu.dtb.write_acv 81 # DTB write access violations
|
|
testsys.cpu.dtb.write_accesses 109988 # DTB write accesses
|
|
testsys.cpu.dtb.data_hits 6233774 # DTB hits
|
|
testsys.cpu.dtb.data_misses 3815 # DTB misses
|
|
testsys.cpu.dtb.data_acv 161 # DTB access violations
|
|
testsys.cpu.dtb.data_accesses 335402 # DTB accesses
|
|
testsys.cpu.itb.fetch_hits 4052272 # ITB hits
|
|
testsys.cpu.itb.fetch_misses 1497 # ITB misses
|
|
testsys.cpu.itb.fetch_acv 69 # ITB acv
|
|
testsys.cpu.itb.fetch_accesses 4053769 # ITB accesses
|
|
testsys.cpu.itb.read_hits 0 # DTB read hits
|
|
testsys.cpu.itb.read_misses 0 # DTB read misses
|
|
testsys.cpu.itb.read_acv 0 # DTB read access violations
|
|
testsys.cpu.itb.read_accesses 0 # DTB read accesses
|
|
testsys.cpu.itb.write_hits 0 # DTB write hits
|
|
testsys.cpu.itb.write_misses 0 # DTB write misses
|
|
testsys.cpu.itb.write_acv 0 # DTB write access violations
|
|
testsys.cpu.itb.write_accesses 0 # DTB write accesses
|
|
testsys.cpu.itb.data_hits 0 # DTB hits
|
|
testsys.cpu.itb.data_misses 0 # DTB misses
|
|
testsys.cpu.itb.data_acv 0 # DTB access violations
|
|
testsys.cpu.itb.data_accesses 0 # DTB accesses
|
|
testsys.cpu.numCycles 400815936 # number of cpu cycles simulated
|
|
testsys.cpu.numWorkItemsStarted 0 # number of work items this cpu started
|
|
testsys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
|
|
testsys.cpu.committedInsts 20258165 # Number of instructions committed
|
|
testsys.cpu.committedOps 20258165 # Number of ops (including micro ops) committed
|
|
testsys.cpu.num_int_alu_accesses 18837392 # Number of integer alu accesses
|
|
testsys.cpu.num_fp_alu_accesses 17313 # Number of float alu accesses
|
|
testsys.cpu.num_func_calls 1221260 # number of times a function call or return occured
|
|
testsys.cpu.num_conditional_control_insts 1442190 # number of instructions that are conditional controls
|
|
testsys.cpu.num_int_insts 18837392 # number of integer instructions
|
|
testsys.cpu.num_fp_insts 17313 # number of float instructions
|
|
testsys.cpu.num_int_register_reads 24787608 # number of times the integer registers were read
|
|
testsys.cpu.num_int_register_writes 14694255 # number of times the integer registers were written
|
|
testsys.cpu.num_fp_register_reads 11133 # number of times the floating registers were read
|
|
testsys.cpu.num_fp_register_writes 10789 # number of times the floating registers were written
|
|
testsys.cpu.num_mem_refs 6263009 # number of memory refs
|
|
testsys.cpu.num_load_insts 3944038 # Number of load instructions
|
|
testsys.cpu.num_store_insts 2318971 # Number of store instructions
|
|
testsys.cpu.num_idle_cycles 380552362.972989 # Number of idle cycles
|
|
testsys.cpu.num_busy_cycles 20263573.027011 # Number of busy cycles
|
|
testsys.cpu.not_idle_fraction 0.050556 # Percentage of non-idle cycles
|
|
testsys.cpu.idle_fraction 0.949444 # Percentage of idle cycles
|
|
testsys.cpu.kern.inst.arm 0 # number of arm instructions executed
|
|
testsys.cpu.kern.inst.quiesce 19598 # number of quiesce instructions executed
|
|
testsys.cpu.kern.inst.hwrei 153677 # number of hwrei instructions executed
|
|
testsys.cpu.kern.ipl_count::0 62790 42.68% 42.68% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::21 19620 13.34% 56.01% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::22 205 0.14% 56.15% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::31 64514 43.85% 100.00% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::total 147129 # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_good::0 62784 43.18% 43.18% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::21 19620 13.49% 56.67% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::22 205 0.14% 56.81% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::31 62791 43.19% 100.00% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::total 145400 # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_ticks::0 194352160500 96.98% 96.98% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::21 1588908500 0.79% 97.77% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::22 8815000 0.00% 97.78% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::31 4458302500 2.22% 100.00% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::total 200408186500 # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_used::0 0.999904 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::21 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::22 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::31 0.973293 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::total 0.988248 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.syscall::2 3 3.61% 3.61% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::3 7 8.43% 12.05% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::4 1 1.20% 13.25% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::6 7 8.43% 21.69% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::17 7 8.43% 30.12% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::19 2 2.41% 32.53% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::20 1 1.20% 33.73% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::33 3 3.61% 37.35% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::45 10 12.05% 49.40% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::48 5 6.02% 55.42% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::54 1 1.20% 56.63% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::59 3 3.61% 60.24% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::71 15 18.07% 78.31% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::74 4 4.82% 83.13% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::97 2 2.41% 85.54% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::98 2 2.41% 87.95% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::101 2 2.41% 90.36% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::102 2 2.41% 92.77% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::104 1 1.20% 93.98% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::105 3 3.61% 97.59% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::118 2 2.41% 100.00% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::total 83 # number of syscalls executed
|
|
testsys.cpu.kern.callpal::swpctx 437 0.34% 0.34% # number of callpals executed
|
|
testsys.cpu.kern.callpal::tbi 20 0.02% 0.36% # number of callpals executed
|
|
testsys.cpu.kern.callpal::swpipl 106841 83.26% 83.62% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rdps 359 0.28% 83.90% # number of callpals executed
|
|
testsys.cpu.kern.callpal::wrusp 3 0.00% 83.90% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rdusp 3 0.00% 83.90% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rti 20470 15.95% 99.86% # number of callpals executed
|
|
testsys.cpu.kern.callpal::callsys 140 0.11% 99.97% # number of callpals executed
|
|
testsys.cpu.kern.callpal::imb 44 0.03% 100.00% # number of callpals executed
|
|
testsys.cpu.kern.callpal::total 128317 # number of callpals executed
|
|
testsys.cpu.kern.mode_switch::kernel 1281 # number of protection mode switches
|
|
testsys.cpu.kern.mode_switch::user 703 # number of protection mode switches
|
|
testsys.cpu.kern.mode_switch::idle 19627 # number of protection mode switches
|
|
testsys.cpu.kern.mode_good::kernel 707
|
|
testsys.cpu.kern.mode_good::user 703
|
|
testsys.cpu.kern.mode_good::idle 4
|
|
testsys.cpu.kern.mode_switch_good::kernel 0.551913 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::user 1 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::idle 0.000204 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::total 0.065430 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_ticks::kernel 1002766500 60.53% 60.53% # number of ticks spent at the given mode
|
|
testsys.cpu.kern.mode_ticks::user 533073000 32.18% 92.70% # number of ticks spent at the given mode
|
|
testsys.cpu.kern.mode_ticks::idle 120928500 7.30% 100.00% # number of ticks spent at the given mode
|
|
testsys.cpu.kern.swap_context 437 # number of times the context was actually changed
|
|
testsys.tsunami.ethernet.txBytes 960 # Bytes Transmitted
|
|
testsys.tsunami.ethernet.rxBytes 798 # Bytes Received
|
|
testsys.tsunami.ethernet.txPackets 8 # Number of Packets Transmitted
|
|
testsys.tsunami.ethernet.rxPackets 5 # Number of Packets Received
|
|
testsys.tsunami.ethernet.txIpChecksums 2 # Number of tx IP Checksums done by device
|
|
testsys.tsunami.ethernet.rxIpChecksums 5 # Number of rx IP Checksums done by device
|
|
testsys.tsunami.ethernet.txTcpChecksums 2 # Number of tx TCP Checksums done by device
|
|
testsys.tsunami.ethernet.rxTcpChecksums 5 # Number of rx TCP Checksums done by device
|
|
testsys.tsunami.ethernet.txUdpChecksums 0 # Number of tx UDP Checksums done by device
|
|
testsys.tsunami.ethernet.rxUdpChecksums 0 # Number of rx UDP Checksums done by device
|
|
testsys.tsunami.ethernet.descDMAReads 2131994 # Number of descriptors the device read w/ DMA
|
|
testsys.tsunami.ethernet.descDMAWrites 13 # Number of descriptors the device wrote w/ DMA
|
|
testsys.tsunami.ethernet.descDmaReadBytes 51167856 # number of descriptor bytes read w/ DMA
|
|
testsys.tsunami.ethernet.descDmaWriteBytes 104 # number of descriptor bytes write w/ DMA
|
|
testsys.tsunami.ethernet.totBandwidth 70176 # Total Bandwidth (bits/s)
|
|
testsys.tsunami.ethernet.totPackets 13 # Total Packets
|
|
testsys.tsunami.ethernet.totBytes 1758 # Total Bytes
|
|
testsys.tsunami.ethernet.totPPS 65 # Total Tranmission Rate (packets/s)
|
|
testsys.tsunami.ethernet.txBandwidth 38322 # Transmit Bandwidth (bits/s)
|
|
testsys.tsunami.ethernet.rxBandwidth 31855 # Receive Bandwidth (bits/s)
|
|
testsys.tsunami.ethernet.txPPS 40 # Packet Tranmission Rate (packets/s)
|
|
testsys.tsunami.ethernet.rxPPS 25 # Packet Reception Rate (packets/s)
|
|
testsys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
|
|
testsys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
|
|
testsys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
|
|
testsys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
|
|
testsys.tsunami.ethernet.postedRxDesc 5 # number of RxDesc interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxDesc 5 # total number of RxDesc written to ISR
|
|
testsys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
|
|
testsys.tsunami.ethernet.postedTxIdle 19571 # number of TxIdle interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxIdle 2131994 # total number of TxIdle written to ISR
|
|
testsys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
|
|
testsys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
|
|
testsys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
|
|
testsys.tsunami.ethernet.postedInterrupts 2132012 # number of posts to CPU
|
|
testsys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
|
|
drivesys.physmem.bytes_read::cpu.inst 76288612 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::cpu.data 26312880 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::tsunami.ethernet 51169134 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::total 153770626 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_inst_read::cpu.inst 76288612 # Number of instructions bytes read from this memory
|
|
drivesys.physmem.bytes_inst_read::total 76288612 # Number of instructions bytes read from this memory
|
|
drivesys.physmem.bytes_written::cpu.data 14635456 # Number of bytes written to this memory
|
|
drivesys.physmem.bytes_written::tsunami.ethernet 1064 # Number of bytes written to this memory
|
|
drivesys.physmem.bytes_written::total 14636520 # Number of bytes written to this memory
|
|
drivesys.physmem.num_reads::cpu.inst 19072153 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::cpu.data 3651006 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::tsunami.ethernet 2132030 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::total 24855189 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_writes::cpu.data 2026958 # Number of write requests responded to by this memory
|
|
drivesys.physmem.num_writes::tsunami.ethernet 37 # Number of write requests responded to by this memory
|
|
drivesys.physmem.num_writes::total 2026995 # Number of write requests responded to by this memory
|
|
drivesys.physmem.bw_read::cpu.inst 380664044 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::cpu.data 131295708 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::tsunami.ethernet 255323160 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::total 767282912 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_inst_read::cpu.inst 380664044 # Instruction read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_inst_read::total 380664044 # Instruction read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::cpu.data 73027831 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::tsunami.ethernet 5309 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::total 73033140 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::cpu.inst 380664044 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::cpu.data 204323539 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::tsunami.ethernet 255328469 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::total 840316053 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.readReqs 0 # Total number of read requests seen
|
|
drivesys.physmem.writeReqs 0 # Total number of write requests seen
|
|
drivesys.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
|
|
drivesys.physmem.bytesRead 0 # Total number of bytes read from memory
|
|
drivesys.physmem.bytesWritten 0 # Total number of bytes written to memory
|
|
drivesys.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
|
|
drivesys.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
|
|
drivesys.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
|
|
drivesys.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
|
|
drivesys.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
|
|
drivesys.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
|
|
drivesys.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
|
|
drivesys.physmem.totGap 0 # Total gap between requests
|
|
drivesys.physmem.readPktSize::0 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::1 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::2 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::3 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::4 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::5 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::6 0 # Categorize read packet sizes
|
|
drivesys.physmem.writePktSize::0 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::1 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::2 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::3 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::4 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::5 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::6 0 # Categorize write packet sizes
|
|
drivesys.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.totQLat 0 # Total cycles spent in queuing delays
|
|
drivesys.physmem.totMemAccLat 0 # Sum of mem lat for all requests
|
|
drivesys.physmem.totBusLat 0 # Total cycles spent in databus access
|
|
drivesys.physmem.totBankLat 0 # Total cycles spent in bank access
|
|
drivesys.physmem.avgQLat nan # Average queueing delay per request
|
|
drivesys.physmem.avgBankLat nan # Average bank access latency per request
|
|
drivesys.physmem.avgBusLat nan # Average bus latency per request
|
|
drivesys.physmem.avgMemAccLat nan # Average memory access latency
|
|
drivesys.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
|
|
drivesys.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
|
|
drivesys.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
|
|
drivesys.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
|
|
drivesys.physmem.peakBW 12800.00 # Theoretical peak bandwidth in MB/s
|
|
drivesys.physmem.busUtil 0.00 # Data bus utilization in percentage
|
|
drivesys.physmem.avgRdQLen 0.00 # Average read queue length over time
|
|
drivesys.physmem.avgWrQLen 0.00 # Average write queue length over time
|
|
drivesys.physmem.readRowHits 0 # Number of row buffer hits during reads
|
|
drivesys.physmem.writeRowHits 0 # Number of row buffer hits during writes
|
|
drivesys.physmem.readRowHitRate nan # Row buffer hit rate for reads
|
|
drivesys.physmem.writeRowHitRate nan # Row buffer hit rate for writes
|
|
drivesys.physmem.avgGap nan # Average gap between requests
|
|
drivesys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
drivesys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
drivesys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
drivesys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
drivesys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
drivesys.disk0.dma_write_txs 0 # Number of DMA write transactions.
|
|
drivesys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
drivesys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
drivesys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
drivesys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
drivesys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
drivesys.disk2.dma_write_txs 0 # Number of DMA write transactions.
|
|
drivesys.cpu.dtb.fetch_hits 0 # ITB hits
|
|
drivesys.cpu.dtb.fetch_misses 0 # ITB misses
|
|
drivesys.cpu.dtb.fetch_acv 0 # ITB acv
|
|
drivesys.cpu.dtb.fetch_accesses 0 # ITB accesses
|
|
drivesys.cpu.dtb.read_hits 3729326 # DTB read hits
|
|
drivesys.cpu.dtb.read_misses 487 # DTB read misses
|
|
drivesys.cpu.dtb.read_acv 30 # DTB read access violations
|
|
drivesys.cpu.dtb.read_accesses 267991 # DTB read accesses
|
|
drivesys.cpu.dtb.write_hits 2086333 # DTB write hits
|
|
drivesys.cpu.dtb.write_misses 82 # DTB write misses
|
|
drivesys.cpu.dtb.write_acv 10 # DTB write access violations
|
|
drivesys.cpu.dtb.write_accesses 133239 # DTB write accesses
|
|
drivesys.cpu.dtb.data_hits 5815659 # DTB hits
|
|
drivesys.cpu.dtb.data_misses 569 # DTB misses
|
|
drivesys.cpu.dtb.data_acv 40 # DTB access violations
|
|
drivesys.cpu.dtb.data_accesses 401230 # DTB accesses
|
|
drivesys.cpu.itb.fetch_hits 4201097 # ITB hits
|
|
drivesys.cpu.itb.fetch_misses 194 # ITB misses
|
|
drivesys.cpu.itb.fetch_acv 22 # ITB acv
|
|
drivesys.cpu.itb.fetch_accesses 4201291 # ITB accesses
|
|
drivesys.cpu.itb.read_hits 0 # DTB read hits
|
|
drivesys.cpu.itb.read_misses 0 # DTB read misses
|
|
drivesys.cpu.itb.read_acv 0 # DTB read access violations
|
|
drivesys.cpu.itb.read_accesses 0 # DTB read accesses
|
|
drivesys.cpu.itb.write_hits 0 # DTB write hits
|
|
drivesys.cpu.itb.write_misses 0 # DTB write misses
|
|
drivesys.cpu.itb.write_acv 0 # DTB write access violations
|
|
drivesys.cpu.itb.write_accesses 0 # DTB write accesses
|
|
drivesys.cpu.itb.data_hits 0 # DTB hits
|
|
drivesys.cpu.itb.data_misses 0 # DTB misses
|
|
drivesys.cpu.itb.data_acv 0 # DTB access violations
|
|
drivesys.cpu.itb.data_accesses 0 # DTB accesses
|
|
drivesys.cpu.numCycles 801619128 # number of cpu cycles simulated
|
|
drivesys.cpu.numWorkItemsStarted 0 # number of work items this cpu started
|
|
drivesys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
|
|
drivesys.cpu.committedInsts 19071544 # Number of instructions committed
|
|
drivesys.cpu.committedOps 19071544 # Number of ops (including micro ops) committed
|
|
drivesys.cpu.num_int_alu_accesses 17759891 # Number of integer alu accesses
|
|
drivesys.cpu.num_fp_alu_accesses 1412 # Number of float alu accesses
|
|
drivesys.cpu.num_func_calls 1266408 # number of times a function call or return occured
|
|
drivesys.cpu.num_conditional_control_insts 1266328 # number of instructions that are conditional controls
|
|
drivesys.cpu.num_int_insts 17759891 # number of integer instructions
|
|
drivesys.cpu.num_fp_insts 1412 # number of float instructions
|
|
drivesys.cpu.num_int_register_reads 23097438 # number of times the integer registers were read
|
|
drivesys.cpu.num_int_register_writes 13996340 # number of times the integer registers were written
|
|
drivesys.cpu.num_fp_register_reads 760 # number of times the floating registers were read
|
|
drivesys.cpu.num_fp_register_writes 766 # number of times the floating registers were written
|
|
drivesys.cpu.num_mem_refs 5837119 # number of memory refs
|
|
drivesys.cpu.num_load_insts 3750273 # Number of load instructions
|
|
drivesys.cpu.num_store_insts 2086846 # Number of store instructions
|
|
drivesys.cpu.num_idle_cycles 782547188.298833 # Number of idle cycles
|
|
drivesys.cpu.num_busy_cycles 19071939.701167 # Number of busy cycles
|
|
drivesys.cpu.not_idle_fraction 0.023792 # Percentage of non-idle cycles
|
|
drivesys.cpu.idle_fraction 0.976208 # Percentage of idle cycles
|
|
drivesys.cpu.kern.inst.arm 0 # number of arm instructions executed
|
|
drivesys.cpu.kern.inst.quiesce 19898 # number of quiesce instructions executed
|
|
drivesys.cpu.kern.inst.hwrei 143758 # number of hwrei instructions executed
|
|
drivesys.cpu.kern.ipl_count::0 60430 42.42% 42.42% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::21 19752 13.86% 56.28% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::22 205 0.14% 56.42% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::31 62082 43.58% 100.00% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::total 142469 # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_good::0 60430 42.91% 42.91% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::21 19752 14.03% 56.94% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::22 205 0.15% 57.09% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::31 60432 42.91% 100.00% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::total 140819 # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_ticks::0 197392680000 98.50% 98.50% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::21 799890500 0.40% 98.90% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::22 4407500 0.00% 98.90% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::31 2207804000 1.10% 100.00% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::total 200404782000 # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_used::0 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::21 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::22 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::31 0.973422 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::total 0.988419 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.syscall::2 1 4.55% 4.55% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::6 3 13.64% 18.18% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::17 2 9.09% 27.27% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::97 1 4.55% 31.82% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::99 2 9.09% 40.91% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::101 2 9.09% 50.00% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::102 3 13.64% 63.64% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::104 1 4.55% 68.18% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::105 3 13.64% 81.82% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::106 1 4.55% 86.36% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::118 2 9.09% 95.45% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::150 1 4.55% 100.00% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::total 22 # number of syscalls executed
|
|
drivesys.cpu.kern.callpal::swpctx 72 0.06% 0.06% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::tbi 5 0.00% 0.06% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::swpipl 102452 83.31% 83.37% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rdps 354 0.29% 83.66% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rdusp 1 0.00% 83.66% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rti 20062 16.31% 99.97% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::callsys 25 0.02% 99.99% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::imb 7 0.01% 100.00% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::total 122978 # number of callpals executed
|
|
drivesys.cpu.kern.mode_switch::kernel 214 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_switch::user 139 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_switch::idle 19920 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_good::kernel 143
|
|
drivesys.cpu.kern.mode_good::user 139
|
|
drivesys.cpu.kern.mode_good::idle 4
|
|
drivesys.cpu.kern.mode_switch_good::kernel 0.668224 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::user 1 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::idle 0.000201 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::total 0.014107 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_ticks::kernel 78132750 2.64% 2.64% # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.mode_ticks::user 319665750 10.79% 13.43% # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.mode_ticks::idle 2564974000 86.57% 100.00% # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.swap_context 72 # number of times the context was actually changed
|
|
drivesys.tsunami.ethernet.txBytes 798 # Bytes Transmitted
|
|
drivesys.tsunami.ethernet.rxBytes 960 # Bytes Received
|
|
drivesys.tsunami.ethernet.txPackets 5 # Number of Packets Transmitted
|
|
drivesys.tsunami.ethernet.rxPackets 8 # Number of Packets Received
|
|
drivesys.tsunami.ethernet.txIpChecksums 2 # Number of tx IP Checksums done by device
|
|
drivesys.tsunami.ethernet.rxIpChecksums 8 # Number of rx IP Checksums done by device
|
|
drivesys.tsunami.ethernet.txTcpChecksums 2 # Number of tx TCP Checksums done by device
|
|
drivesys.tsunami.ethernet.rxTcpChecksums 8 # Number of rx TCP Checksums done by device
|
|
drivesys.tsunami.ethernet.txUdpChecksums 0 # Number of tx UDP Checksums done by device
|
|
drivesys.tsunami.ethernet.rxUdpChecksums 0 # Number of rx UDP Checksums done by device
|
|
drivesys.tsunami.ethernet.descDMAReads 2132001 # Number of descriptors the device read w/ DMA
|
|
drivesys.tsunami.ethernet.descDMAWrites 13 # Number of descriptors the device wrote w/ DMA
|
|
drivesys.tsunami.ethernet.descDmaReadBytes 51168024 # number of descriptor bytes read w/ DMA
|
|
drivesys.tsunami.ethernet.descDmaWriteBytes 104 # number of descriptor bytes write w/ DMA
|
|
drivesys.tsunami.ethernet.totBandwidth 70176 # Total Bandwidth (bits/s)
|
|
drivesys.tsunami.ethernet.totPackets 13 # Total Packets
|
|
drivesys.tsunami.ethernet.totBytes 1758 # Total Bytes
|
|
drivesys.tsunami.ethernet.totPPS 65 # Total Tranmission Rate (packets/s)
|
|
drivesys.tsunami.ethernet.txBandwidth 31855 # Transmit Bandwidth (bits/s)
|
|
drivesys.tsunami.ethernet.rxBandwidth 38322 # Receive Bandwidth (bits/s)
|
|
drivesys.tsunami.ethernet.txPPS 25 # Packet Tranmission Rate (packets/s)
|
|
drivesys.tsunami.ethernet.rxPPS 40 # Packet Reception Rate (packets/s)
|
|
drivesys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
|
|
drivesys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
|
|
drivesys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
|
|
drivesys.tsunami.ethernet.postedRxDesc 8 # number of RxDesc interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxDesc 8 # total number of RxDesc written to ISR
|
|
drivesys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
|
|
drivesys.tsunami.ethernet.postedTxIdle 19750 # number of TxIdle interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxIdle 2132001 # total number of TxIdle written to ISR
|
|
drivesys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
|
|
drivesys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
|
|
drivesys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
|
|
drivesys.tsunami.ethernet.postedInterrupts 2132022 # number of posts to CPU
|
|
drivesys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
|
|
|
|
---------- End Simulation Statistics ----------
|
|
|
|
---------- Begin Simulation Statistics ----------
|
|
sim_seconds 0.000407 # Number of seconds simulated
|
|
sim_ticks 407365500 # Number of ticks simulated
|
|
final_tick 4321609052000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
|
|
sim_freq 1000000000000 # Frequency of simulated ticks
|
|
host_inst_rate 6212406894 # Simulator instruction rate (inst/s)
|
|
host_op_rate 6210790807 # Simulator op (including micro ops) rate (op/s)
|
|
host_tick_rate 4809282801 # Simulator tick rate (ticks/s)
|
|
host_mem_usage 472520 # Number of bytes of host memory used
|
|
host_seconds 0.08 # Real time elapsed on the host
|
|
sim_insts 525940622 # Number of instructions simulated
|
|
sim_ops 525940622 # Number of ops (including micro ops) simulated
|
|
testsys.physmem.bytes_read::cpu.inst 141136 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::cpu.data 48760 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::tsunami.ethernet 103992 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::total 293888 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_inst_read::cpu.inst 141136 # Number of instructions bytes read from this memory
|
|
testsys.physmem.bytes_inst_read::total 141136 # Number of instructions bytes read from this memory
|
|
testsys.physmem.bytes_written::cpu.data 27028 # Number of bytes written to this memory
|
|
testsys.physmem.bytes_written::total 27028 # Number of bytes written to this memory
|
|
testsys.physmem.num_reads::cpu.inst 35284 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::cpu.data 6744 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::tsunami.ethernet 4333 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::total 46361 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_writes::cpu.data 3721 # Number of write requests responded to by this memory
|
|
testsys.physmem.num_writes::total 3721 # Number of write requests responded to by this memory
|
|
testsys.physmem.bw_read::cpu.inst 346460365 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::cpu.data 119695949 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::tsunami.ethernet 255279350 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::total 721435664 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_inst_read::cpu.inst 346460365 # Instruction read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_inst_read::total 346460365 # Instruction read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::cpu.data 66348279 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::total 66348279 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_total::cpu.inst 346460365 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::cpu.data 186044228 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::tsunami.ethernet 255279350 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::total 787783943 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.readReqs 0 # Total number of read requests seen
|
|
testsys.physmem.writeReqs 0 # Total number of write requests seen
|
|
testsys.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
|
|
testsys.physmem.bytesRead 0 # Total number of bytes read from memory
|
|
testsys.physmem.bytesWritten 0 # Total number of bytes written to memory
|
|
testsys.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
|
|
testsys.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
|
|
testsys.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
|
|
testsys.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
|
|
testsys.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
|
|
testsys.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
|
|
testsys.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
|
|
testsys.physmem.totGap 0 # Total gap between requests
|
|
testsys.physmem.readPktSize::0 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::1 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::2 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::3 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::4 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::5 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::6 0 # Categorize read packet sizes
|
|
testsys.physmem.writePktSize::0 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::1 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::2 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::3 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::4 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::5 0 # Categorize write packet sizes
|
|
testsys.physmem.writePktSize::6 0 # Categorize write packet sizes
|
|
testsys.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
|
|
testsys.physmem.totQLat 0 # Total cycles spent in queuing delays
|
|
testsys.physmem.totMemAccLat 0 # Sum of mem lat for all requests
|
|
testsys.physmem.totBusLat 0 # Total cycles spent in databus access
|
|
testsys.physmem.totBankLat 0 # Total cycles spent in bank access
|
|
testsys.physmem.avgQLat nan # Average queueing delay per request
|
|
testsys.physmem.avgBankLat nan # Average bank access latency per request
|
|
testsys.physmem.avgBusLat nan # Average bus latency per request
|
|
testsys.physmem.avgMemAccLat nan # Average memory access latency
|
|
testsys.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
|
|
testsys.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
|
|
testsys.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
|
|
testsys.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
|
|
testsys.physmem.peakBW 12800.00 # Theoretical peak bandwidth in MB/s
|
|
testsys.physmem.busUtil 0.00 # Data bus utilization in percentage
|
|
testsys.physmem.avgRdQLen 0.00 # Average read queue length over time
|
|
testsys.physmem.avgWrQLen 0.00 # Average write queue length over time
|
|
testsys.physmem.readRowHits 0 # Number of row buffer hits during reads
|
|
testsys.physmem.writeRowHits 0 # Number of row buffer hits during writes
|
|
testsys.physmem.readRowHitRate nan # Row buffer hit rate for reads
|
|
testsys.physmem.writeRowHitRate nan # Row buffer hit rate for writes
|
|
testsys.physmem.avgGap nan # Average gap between requests
|
|
testsys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
testsys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
testsys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
testsys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
testsys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
testsys.disk0.dma_write_txs 0 # Number of DMA write transactions.
|
|
testsys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
testsys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
testsys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
testsys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
testsys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
testsys.disk2.dma_write_txs 0 # Number of DMA write transactions.
|
|
testsys.cpu.dtb.fetch_hits 0 # ITB hits
|
|
testsys.cpu.dtb.fetch_misses 0 # ITB misses
|
|
testsys.cpu.dtb.fetch_acv 0 # ITB acv
|
|
testsys.cpu.dtb.fetch_accesses 0 # ITB accesses
|
|
testsys.cpu.dtb.read_hits 6900 # DTB read hits
|
|
testsys.cpu.dtb.read_misses 0 # DTB read misses
|
|
testsys.cpu.dtb.read_acv 0 # DTB read access violations
|
|
testsys.cpu.dtb.read_accesses 0 # DTB read accesses
|
|
testsys.cpu.dtb.write_hits 3839 # DTB write hits
|
|
testsys.cpu.dtb.write_misses 0 # DTB write misses
|
|
testsys.cpu.dtb.write_acv 0 # DTB write access violations
|
|
testsys.cpu.dtb.write_accesses 0 # DTB write accesses
|
|
testsys.cpu.dtb.data_hits 10739 # DTB hits
|
|
testsys.cpu.dtb.data_misses 0 # DTB misses
|
|
testsys.cpu.dtb.data_acv 0 # DTB access violations
|
|
testsys.cpu.dtb.data_accesses 0 # DTB accesses
|
|
testsys.cpu.itb.fetch_hits 5847 # ITB hits
|
|
testsys.cpu.itb.fetch_misses 0 # ITB misses
|
|
testsys.cpu.itb.fetch_acv 0 # ITB acv
|
|
testsys.cpu.itb.fetch_accesses 5847 # ITB accesses
|
|
testsys.cpu.itb.read_hits 0 # DTB read hits
|
|
testsys.cpu.itb.read_misses 0 # DTB read misses
|
|
testsys.cpu.itb.read_acv 0 # DTB read access violations
|
|
testsys.cpu.itb.read_accesses 0 # DTB read accesses
|
|
testsys.cpu.itb.write_hits 0 # DTB write hits
|
|
testsys.cpu.itb.write_misses 0 # DTB write misses
|
|
testsys.cpu.itb.write_acv 0 # DTB write access violations
|
|
testsys.cpu.itb.write_accesses 0 # DTB write accesses
|
|
testsys.cpu.itb.data_hits 0 # DTB hits
|
|
testsys.cpu.itb.data_misses 0 # DTB misses
|
|
testsys.cpu.itb.data_acv 0 # DTB access violations
|
|
testsys.cpu.itb.data_accesses 0 # DTB accesses
|
|
testsys.cpu.numCycles 799188 # number of cpu cycles simulated
|
|
testsys.cpu.numWorkItemsStarted 0 # number of work items this cpu started
|
|
testsys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
|
|
testsys.cpu.committedInsts 35284 # Number of instructions committed
|
|
testsys.cpu.committedOps 35284 # Number of ops (including micro ops) committed
|
|
testsys.cpu.num_int_alu_accesses 32710 # Number of integer alu accesses
|
|
testsys.cpu.num_fp_alu_accesses 0 # Number of float alu accesses
|
|
testsys.cpu.num_func_calls 2330 # number of times a function call or return occured
|
|
testsys.cpu.num_conditional_control_insts 2292 # number of instructions that are conditional controls
|
|
testsys.cpu.num_int_insts 32710 # number of integer instructions
|
|
testsys.cpu.num_fp_insts 0 # number of float instructions
|
|
testsys.cpu.num_int_register_reads 42720 # number of times the integer registers were read
|
|
testsys.cpu.num_int_register_writes 25860 # number of times the integer registers were written
|
|
testsys.cpu.num_fp_register_reads 0 # number of times the floating registers were read
|
|
testsys.cpu.num_fp_register_writes 0 # number of times the floating registers were written
|
|
testsys.cpu.num_mem_refs 10779 # number of memory refs
|
|
testsys.cpu.num_load_insts 6939 # Number of load instructions
|
|
testsys.cpu.num_store_insts 3840 # Number of store instructions
|
|
testsys.cpu.num_idle_cycles 764577.129267 # Number of idle cycles
|
|
testsys.cpu.num_busy_cycles 34610.870733 # Number of busy cycles
|
|
testsys.cpu.not_idle_fraction 0.043308 # Percentage of non-idle cycles
|
|
testsys.cpu.idle_fraction 0.956692 # Percentage of idle cycles
|
|
testsys.cpu.kern.inst.arm 0 # number of arm instructions executed
|
|
testsys.cpu.kern.inst.quiesce 40 # number of quiesce instructions executed
|
|
testsys.cpu.kern.inst.hwrei 288 # number of hwrei instructions executed
|
|
testsys.cpu.kern.ipl_count::0 120 41.81% 41.81% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::21 39 13.59% 55.40% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::22 1 0.35% 55.75% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::31 127 44.25% 100.00% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::total 287 # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_good::0 120 42.86% 42.86% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::21 39 13.93% 56.79% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::22 1 0.36% 57.14% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::31 120 42.86% 100.00% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::total 280 # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_ticks::0 387349500 96.94% 96.94% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::21 3159000 0.79% 97.73% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::22 43000 0.01% 97.74% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::31 9042500 2.26% 100.00% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::total 399594000 # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_used::0 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::21 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::22 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::31 0.944882 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::total 0.975610 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.callpal::swpipl 207 83.47% 83.47% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rdps 1 0.40% 83.87% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rti 40 16.13% 100.00% # number of callpals executed
|
|
testsys.cpu.kern.callpal::total 248 # number of callpals executed
|
|
testsys.cpu.kern.mode_switch::kernel 0 # number of protection mode switches
|
|
testsys.cpu.kern.mode_switch::user 0 # number of protection mode switches
|
|
testsys.cpu.kern.mode_switch::idle 40 # number of protection mode switches
|
|
testsys.cpu.kern.mode_good::kernel 0
|
|
testsys.cpu.kern.mode_good::user 0
|
|
testsys.cpu.kern.mode_good::idle 0
|
|
testsys.cpu.kern.mode_switch_good::kernel nan # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::user nan # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::idle 0 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::total 0 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_ticks::kernel 0 # number of ticks spent at the given mode
|
|
testsys.cpu.kern.mode_ticks::user 0 # number of ticks spent at the given mode
|
|
testsys.cpu.kern.mode_ticks::idle 0 # number of ticks spent at the given mode
|
|
testsys.cpu.kern.swap_context 0 # number of times the context was actually changed
|
|
testsys.tsunami.ethernet.descDMAReads 4333 # Number of descriptors the device read w/ DMA
|
|
testsys.tsunami.ethernet.descDMAWrites 0 # Number of descriptors the device wrote w/ DMA
|
|
testsys.tsunami.ethernet.descDmaReadBytes 103992 # number of descriptor bytes read w/ DMA
|
|
testsys.tsunami.ethernet.descDmaWriteBytes 0 # number of descriptor bytes write w/ DMA
|
|
testsys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
|
|
testsys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
|
|
testsys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
|
|
testsys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
|
|
testsys.tsunami.ethernet.postedRxDesc 0 # number of RxDesc interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxDesc 0 # total number of RxDesc written to ISR
|
|
testsys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
|
|
testsys.tsunami.ethernet.postedTxIdle 39 # number of TxIdle interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxIdle 4333 # total number of TxIdle written to ISR
|
|
testsys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
|
|
testsys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
|
|
testsys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
|
|
testsys.tsunami.ethernet.postedInterrupts 4333 # number of posts to CPU
|
|
testsys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
|
|
drivesys.physmem.bytes_read::cpu.inst 144608 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::cpu.data 49952 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::tsunami.ethernet 104016 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::total 298576 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_inst_read::cpu.inst 144608 # Number of instructions bytes read from this memory
|
|
drivesys.physmem.bytes_inst_read::total 144608 # Number of instructions bytes read from this memory
|
|
drivesys.physmem.bytes_written::cpu.data 27688 # Number of bytes written to this memory
|
|
drivesys.physmem.bytes_written::total 27688 # Number of bytes written to this memory
|
|
drivesys.physmem.num_reads::cpu.inst 36152 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::cpu.data 6909 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::tsunami.ethernet 4334 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::total 47395 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_writes::cpu.data 3812 # Number of write requests responded to by this memory
|
|
drivesys.physmem.num_writes::total 3812 # Number of write requests responded to by this memory
|
|
drivesys.physmem.bw_read::cpu.inst 354983424 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::cpu.data 122622068 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::tsunami.ethernet 255338265 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::total 732943757 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_inst_read::cpu.inst 354983424 # Instruction read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_inst_read::total 354983424 # Instruction read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::cpu.data 67968446 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::total 67968446 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::cpu.inst 354983424 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::cpu.data 190590514 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::tsunami.ethernet 255338265 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::total 800912203 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.readReqs 0 # Total number of read requests seen
|
|
drivesys.physmem.writeReqs 0 # Total number of write requests seen
|
|
drivesys.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
|
|
drivesys.physmem.bytesRead 0 # Total number of bytes read from memory
|
|
drivesys.physmem.bytesWritten 0 # Total number of bytes written to memory
|
|
drivesys.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
|
|
drivesys.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
|
|
drivesys.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
|
|
drivesys.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
|
|
drivesys.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
|
|
drivesys.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
|
|
drivesys.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
|
|
drivesys.physmem.totGap 0 # Total gap between requests
|
|
drivesys.physmem.readPktSize::0 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::1 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::2 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::3 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::4 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::5 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::6 0 # Categorize read packet sizes
|
|
drivesys.physmem.writePktSize::0 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::1 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::2 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::3 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::4 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::5 0 # Categorize write packet sizes
|
|
drivesys.physmem.writePktSize::6 0 # Categorize write packet sizes
|
|
drivesys.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.totQLat 0 # Total cycles spent in queuing delays
|
|
drivesys.physmem.totMemAccLat 0 # Sum of mem lat for all requests
|
|
drivesys.physmem.totBusLat 0 # Total cycles spent in databus access
|
|
drivesys.physmem.totBankLat 0 # Total cycles spent in bank access
|
|
drivesys.physmem.avgQLat nan # Average queueing delay per request
|
|
drivesys.physmem.avgBankLat nan # Average bank access latency per request
|
|
drivesys.physmem.avgBusLat nan # Average bus latency per request
|
|
drivesys.physmem.avgMemAccLat nan # Average memory access latency
|
|
drivesys.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
|
|
drivesys.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
|
|
drivesys.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
|
|
drivesys.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
|
|
drivesys.physmem.peakBW 12800.00 # Theoretical peak bandwidth in MB/s
|
|
drivesys.physmem.busUtil 0.00 # Data bus utilization in percentage
|
|
drivesys.physmem.avgRdQLen 0.00 # Average read queue length over time
|
|
drivesys.physmem.avgWrQLen 0.00 # Average write queue length over time
|
|
drivesys.physmem.readRowHits 0 # Number of row buffer hits during reads
|
|
drivesys.physmem.writeRowHits 0 # Number of row buffer hits during writes
|
|
drivesys.physmem.readRowHitRate nan # Row buffer hit rate for reads
|
|
drivesys.physmem.writeRowHitRate nan # Row buffer hit rate for writes
|
|
drivesys.physmem.avgGap nan # Average gap between requests
|
|
drivesys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
drivesys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
drivesys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
drivesys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
drivesys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
drivesys.disk0.dma_write_txs 0 # Number of DMA write transactions.
|
|
drivesys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
drivesys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
drivesys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
drivesys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
drivesys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
drivesys.disk2.dma_write_txs 0 # Number of DMA write transactions.
|
|
drivesys.cpu.dtb.fetch_hits 0 # ITB hits
|
|
drivesys.cpu.dtb.fetch_misses 0 # ITB misses
|
|
drivesys.cpu.dtb.fetch_acv 0 # ITB acv
|
|
drivesys.cpu.dtb.fetch_accesses 0 # ITB accesses
|
|
drivesys.cpu.dtb.read_hits 7069 # DTB read hits
|
|
drivesys.cpu.dtb.read_misses 0 # DTB read misses
|
|
drivesys.cpu.dtb.read_acv 0 # DTB read access violations
|
|
drivesys.cpu.dtb.read_accesses 0 # DTB read accesses
|
|
drivesys.cpu.dtb.write_hits 3933 # DTB write hits
|
|
drivesys.cpu.dtb.write_misses 0 # DTB write misses
|
|
drivesys.cpu.dtb.write_acv 0 # DTB write access violations
|
|
drivesys.cpu.dtb.write_accesses 0 # DTB write accesses
|
|
drivesys.cpu.dtb.data_hits 11002 # DTB hits
|
|
drivesys.cpu.dtb.data_misses 0 # DTB misses
|
|
drivesys.cpu.dtb.data_acv 0 # DTB access violations
|
|
drivesys.cpu.dtb.data_accesses 0 # DTB accesses
|
|
drivesys.cpu.itb.fetch_hits 5992 # ITB hits
|
|
drivesys.cpu.itb.fetch_misses 0 # ITB misses
|
|
drivesys.cpu.itb.fetch_acv 0 # ITB acv
|
|
drivesys.cpu.itb.fetch_accesses 5992 # ITB accesses
|
|
drivesys.cpu.itb.read_hits 0 # DTB read hits
|
|
drivesys.cpu.itb.read_misses 0 # DTB read misses
|
|
drivesys.cpu.itb.read_acv 0 # DTB read access violations
|
|
drivesys.cpu.itb.read_accesses 0 # DTB read accesses
|
|
drivesys.cpu.itb.write_hits 0 # DTB write hits
|
|
drivesys.cpu.itb.write_misses 0 # DTB write misses
|
|
drivesys.cpu.itb.write_acv 0 # DTB write access violations
|
|
drivesys.cpu.itb.write_accesses 0 # DTB write accesses
|
|
drivesys.cpu.itb.data_hits 0 # DTB hits
|
|
drivesys.cpu.itb.data_misses 0 # DTB misses
|
|
drivesys.cpu.itb.data_acv 0 # DTB access violations
|
|
drivesys.cpu.itb.data_accesses 0 # DTB accesses
|
|
drivesys.cpu.numCycles 1624320 # number of cpu cycles simulated
|
|
drivesys.cpu.numWorkItemsStarted 0 # number of work items this cpu started
|
|
drivesys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
|
|
drivesys.cpu.committedInsts 36152 # Number of instructions committed
|
|
drivesys.cpu.committedOps 36152 # Number of ops (including micro ops) committed
|
|
drivesys.cpu.num_int_alu_accesses 33516 # Number of integer alu accesses
|
|
drivesys.cpu.num_fp_alu_accesses 0 # Number of float alu accesses
|
|
drivesys.cpu.num_func_calls 2388 # number of times a function call or return occured
|
|
drivesys.cpu.num_conditional_control_insts 2347 # number of instructions that are conditional controls
|
|
drivesys.cpu.num_int_insts 33516 # number of integer instructions
|
|
drivesys.cpu.num_fp_insts 0 # number of float instructions
|
|
drivesys.cpu.num_int_register_reads 43772 # number of times the integer registers were read
|
|
drivesys.cpu.num_int_register_writes 26499 # number of times the integer registers were written
|
|
drivesys.cpu.num_fp_register_reads 0 # number of times the floating registers were read
|
|
drivesys.cpu.num_fp_register_writes 0 # number of times the floating registers were written
|
|
drivesys.cpu.num_mem_refs 11043 # number of memory refs
|
|
drivesys.cpu.num_load_insts 7109 # Number of load instructions
|
|
drivesys.cpu.num_store_insts 3934 # Number of store instructions
|
|
drivesys.cpu.num_idle_cycles 1588282.082886 # Number of idle cycles
|
|
drivesys.cpu.num_busy_cycles 36037.917114 # Number of busy cycles
|
|
drivesys.cpu.not_idle_fraction 0.022186 # Percentage of non-idle cycles
|
|
drivesys.cpu.idle_fraction 0.977814 # Percentage of idle cycles
|
|
drivesys.cpu.kern.inst.arm 0 # number of arm instructions executed
|
|
drivesys.cpu.kern.inst.quiesce 41 # number of quiesce instructions executed
|
|
drivesys.cpu.kern.inst.hwrei 295 # number of hwrei instructions executed
|
|
drivesys.cpu.kern.ipl_count::0 123 41.84% 41.84% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::21 40 13.61% 55.44% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::22 1 0.34% 55.78% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::31 130 44.22% 100.00% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::total 294 # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_good::0 123 42.86% 42.86% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::21 40 13.94% 56.79% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::22 1 0.35% 57.14% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::31 123 42.86% 100.00% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::total 287 # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_ticks::0 399809000 98.46% 98.46% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::21 1620000 0.40% 98.85% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::22 21500 0.01% 98.86% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::31 4629500 1.14% 100.00% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::total 406080000 # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_used::0 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::21 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::22 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::31 0.946154 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::total 0.976190 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.callpal::swpipl 212 83.46% 83.46% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rdps 1 0.39% 83.86% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rti 41 16.14% 100.00% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::total 254 # number of callpals executed
|
|
drivesys.cpu.kern.mode_switch::kernel 0 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_switch::user 0 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_switch::idle 41 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_good::kernel 0
|
|
drivesys.cpu.kern.mode_good::user 0
|
|
drivesys.cpu.kern.mode_good::idle 0
|
|
drivesys.cpu.kern.mode_switch_good::kernel nan # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::user nan # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::idle 0 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::total 0 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_ticks::kernel 0 # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.mode_ticks::user 0 # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.mode_ticks::idle 0 # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.swap_context 0 # number of times the context was actually changed
|
|
drivesys.tsunami.ethernet.descDMAReads 4334 # Number of descriptors the device read w/ DMA
|
|
drivesys.tsunami.ethernet.descDMAWrites 0 # Number of descriptors the device wrote w/ DMA
|
|
drivesys.tsunami.ethernet.descDmaReadBytes 104016 # number of descriptor bytes read w/ DMA
|
|
drivesys.tsunami.ethernet.descDmaWriteBytes 0 # number of descriptor bytes write w/ DMA
|
|
drivesys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
|
|
drivesys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
|
|
drivesys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
|
|
drivesys.tsunami.ethernet.postedRxDesc 0 # number of RxDesc interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxDesc 0 # total number of RxDesc written to ISR
|
|
drivesys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
|
|
drivesys.tsunami.ethernet.postedTxIdle 40 # number of TxIdle interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxIdle 4334 # total number of TxIdle written to ISR
|
|
drivesys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
|
|
drivesys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
|
|
drivesys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
|
|
drivesys.tsunami.ethernet.postedInterrupts 4334 # number of posts to CPU
|
|
drivesys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
|
|
|
|
---------- End Simulation Statistics ----------
|