gem5/src/dev/pixelpump.cc
Sudhanshu Jha 9dd54d10ab dev: Add support for single-pass scan out in the PixelPump
Add a helper function to scan out an entire frame in one time
step. This requires the public PixelPump to be changed somewhat to
separate timing updates from general PixelPump control. Instead of
calling PixelPump::start(timings), timings now need to be updated
using a separate call to PixelPump::updateTimings(timings) before
calling PixelPump::start().

Display controllers that don't need accurate timing (e.g., in KVM
mode), can use the new PixelPump::renderFrame() API to render an
entire frame in one step. This call results in the same callbacks
(e.g., calls to nextPixel()) as the timing calls, but they all happen
in immediately. Unlike the timing counterpart, renderFrame() doesn't
support buffer underruns and will panic if nextPixle() indicates an
underrun.

Change-Id: I76c84db04249b02d4207c5281d82aa693d0881be
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2241
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-03-07 11:14:28 +00:00

362 lines
9.8 KiB
C++

/*
* Copyright (c) 2015, 2017 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Andreas Sandberg
*/
#include "dev/pixelpump.hh"
const DisplayTimings DisplayTimings::vga(
640, 480,
48, 96, 16,
33, 2, 10);
DisplayTimings::DisplayTimings(unsigned _width, unsigned _height,
unsigned hbp, unsigned h_sync, unsigned hfp,
unsigned vbp, unsigned v_sync, unsigned vfp)
: width(_width), height(_height),
hBackPorch(hbp), hFrontPorch(hfp), hSync(h_sync),
vBackPorch(vbp), vFrontPorch(vfp), vSync(v_sync)
{
}
void
DisplayTimings::serialize(CheckpointOut &cp) const
{
SERIALIZE_SCALAR(width);
SERIALIZE_SCALAR(height);
SERIALIZE_SCALAR(hBackPorch);
SERIALIZE_SCALAR(hFrontPorch);
SERIALIZE_SCALAR(hSync);
SERIALIZE_SCALAR(vBackPorch);
SERIALIZE_SCALAR(vFrontPorch);
SERIALIZE_SCALAR(vSync);
}
void
DisplayTimings::unserialize(CheckpointIn &cp)
{
UNSERIALIZE_SCALAR(width);
UNSERIALIZE_SCALAR(height);
UNSERIALIZE_SCALAR(hBackPorch);
UNSERIALIZE_SCALAR(hFrontPorch);
UNSERIALIZE_SCALAR(hSync);
UNSERIALIZE_SCALAR(vBackPorch);
UNSERIALIZE_SCALAR(vFrontPorch);
UNSERIALIZE_SCALAR(vSync);
}
BasePixelPump::BasePixelPump(EventManager &em, ClockDomain &pxl_clk,
unsigned pixel_chunk)
: EventManager(em), Clocked(pxl_clk), Serializable(),
pixelChunk(pixel_chunk),
pixelEvents(),
evVSyncBegin("evVSyncBegin", this, &BasePixelPump::onVSyncBegin),
evVSyncEnd("evVSyncEnd", this, &BasePixelPump::onVSyncEnd),
evHSyncBegin("evHSyncBegin", this, &BasePixelPump::onHSyncBegin),
evHSyncEnd("evHSyncEnd", this, &BasePixelPump::onHSyncEnd),
evBeginLine("evBeginLine", this, &BasePixelPump::beginLine),
evRenderPixels("evRenderPixels", this, &BasePixelPump::renderPixels),
_timings(DisplayTimings::vga),
line(0), _posX(0), _underrun(false)
{
}
BasePixelPump::~BasePixelPump()
{
}
void
BasePixelPump::serialize(CheckpointOut &cp) const
{
SERIALIZE_SCALAR(line);
SERIALIZE_SCALAR(_posX);
SERIALIZE_SCALAR(_underrun);
SERIALIZE_OBJ(_timings);
SERIALIZE_OBJ(fb);
for (PixelEvent *event : pixelEvents)
event->serializeSection(cp, event->name());
}
void
BasePixelPump::unserialize(CheckpointIn &cp)
{
UNSERIALIZE_SCALAR(line);
UNSERIALIZE_SCALAR(_posX);
UNSERIALIZE_SCALAR(_underrun);
UNSERIALIZE_OBJ(_timings);
UNSERIALIZE_OBJ(fb);
// We don't need to reschedule the event here since the event was
// suspended by PixelEvent::drain() and will be rescheduled by
// PixelEvent::drainResume().
for (PixelEvent *event : pixelEvents)
event->unserializeSection(cp, event->name());
}
void
BasePixelPump::updateTimings(const DisplayTimings &timings)
{
panic_if(active(), "Trying to update timings in active PixelPump\n");
_timings = timings;
// Resize the frame buffer if needed
if (_timings.width != fb.width() || _timings.height != fb.height())
fb.resize(timings.width, timings.height);
// Set the current line past the last line in the frame. This
// triggers the new frame logic in beginLine().
line = _timings.linesPerFrame();
}
void
BasePixelPump::start()
{
schedule(evBeginLine, clockEdge());
}
void
BasePixelPump::stop()
{
if (evVSyncEnd.scheduled())
deschedule(evVSyncEnd);
if (evHSyncBegin.scheduled())
deschedule(evHSyncBegin);
if (evHSyncEnd.scheduled())
deschedule(evHSyncEnd);
if (evBeginLine.scheduled())
deschedule(evBeginLine);
if (evRenderPixels.scheduled())
deschedule(evRenderPixels);
}
void
BasePixelPump::beginLine()
{
_posX = 0;
line++;
if (line >= _timings.linesPerFrame()) {
_underrun = false;
line = 0;
}
if (line == _timings.lineVSyncStart()) {
onVSyncBegin();
} else if (line == _timings.lineVBackPorchStart()) {
onVSyncEnd();
}
const Cycles h_sync_begin(0);
schedule(evHSyncBegin, clockEdge(h_sync_begin));
const Cycles h_sync_end(h_sync_begin + _timings.hSync);
schedule(evHSyncEnd, clockEdge(h_sync_end));
// Visible area
if (line >= _timings.lineFirstVisible() &&
line < _timings.lineFrontPorchStart()) {
const Cycles h_first_visible(h_sync_end + _timings.hBackPorch);
schedule(evRenderPixels, clockEdge(h_first_visible));
}
schedule(evBeginLine, clockEdge(_timings.cyclesPerLine()));
}
void
BasePixelPump::renderPixels()
{
// Try to handle multiple pixels at a time; doing so reduces the
// accuracy of the underrun detection but lowers simulation
// overhead
const unsigned x_end(std::min(_posX + pixelChunk, _timings.width));
const unsigned pxl_count(x_end - _posX);
const unsigned pos_y(posY());
Pixel pixel(0, 0, 0);
const Pixel underrun_pixel(0, 0, 0);
for (; _posX < x_end && !_underrun; ++_posX) {
if (!nextPixel(pixel)) {
warn("Input buffer underrun in BasePixelPump (%u, %u)\n",
_posX, pos_y);
_underrun = true;
onUnderrun(_posX, pos_y);
pixel = underrun_pixel;
}
fb.pixel(_posX, pos_y) = pixel;
}
// Fill remaining pixels with a dummy pixel value if we ran out of
// data
for (; _posX < x_end; ++_posX)
fb.pixel(_posX, pos_y) = underrun_pixel;
// Schedule a new event to handle the next block of pixels
if (_posX < _timings.width) {
schedule(evRenderPixels, clockEdge(Cycles(pxl_count)));
} else {
if (pos_y == _timings.height - 1)
onFrameDone();
}
}
void
BasePixelPump::renderFrame()
{
_underrun = false;
line = 0;
// Signal vsync end and render the frame
line = _timings.lineVBackPorchStart();
onVSyncEnd();
// We only care about the visible screen area when rendering the
// frame
for (line = _timings.lineFirstVisible();
line < _timings.lineFrontPorchStart();
++line) {
_posX = 0;
onHSyncBegin();
onHSyncEnd();
renderLine();
}
line = _timings.lineFrontPorchStart() - 1;
onFrameDone();
// Signal vsync until the next frame begins
line = _timings.lineVSyncStart();
onVSyncBegin();
}
void
BasePixelPump::renderLine()
{
const unsigned pos_y(posY());
Pixel pixel(0, 0, 0);
for (_posX = 0; _posX < _timings.width; ++_posX) {
if (!nextPixel(pixel)) {
panic("Unexpected underrun in BasePixelPump (%u, %u)\n",
_posX, pos_y);
}
fb.pixel(_posX, pos_y) = pixel;
}
}
BasePixelPump::PixelEvent::PixelEvent(
const char *name, BasePixelPump *_parent, CallbackType _func)
: Event(), Drainable(),
_name(name), parent(*_parent), func(_func),
suspended(false),
relativeTick(0)
{
parent.pixelEvents.push_back(this);
}
DrainState
BasePixelPump::PixelEvent::drain()
{
if (scheduled())
suspend();
return DrainState::Drained;
}
void
BasePixelPump::PixelEvent::drainResume()
{
if (suspended)
resume();
}
void
BasePixelPump::PixelEvent::serialize(CheckpointOut &cp) const
{
assert(!scheduled());
Event::serialize(cp);
SERIALIZE_SCALAR(suspended);
SERIALIZE_SCALAR(relativeTick);
}
void
BasePixelPump::PixelEvent::unserialize(CheckpointIn &cp)
{
Event::unserialize(cp);
UNSERIALIZE_SCALAR(suspended);
UNSERIALIZE_SCALAR(relativeTick);
assert(!scheduled());
}
void
BasePixelPump::PixelEvent::suspend()
{
assert(scheduled());
assert(!suspended);
suspended = true;
relativeTick = when() - curTick();
parent.deschedule(this);
}
void
BasePixelPump::PixelEvent::resume()
{
assert(!scheduled());
assert(suspended);
parent.schedule(this, relativeTick + curTick());
suspended = false;
relativeTick = 0;
}