sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/dev/pcidev.cc
Nathan Binkert b881408ed7 Clean up the Range class and associated usages. The code was 
never clear about whether the end of the range was inclusive
or exclusive.  Make it inclusive, but also provide a RangeSize()
function that will generate a Range based on a start and a size.
This, in combination with using the comparison operators, makes
almost all usages of the range not care how it is stored.

base/range.cc:
    Make the end of the range inclusive.

    start/end -> first/last
    (end seems too much like end() in stl)
base/range.hh:
    Make the end of the range inclusive.

    Fix all comparison operators so that they work correctly with
    an inclusive range.  Also, when comparing one range to another
    with <, <=, >, >=, we only look at the beginning of the range
    beacuse x <= y should be the same as x < y || x == y.  (This wasn't
    the case before.)

    Add a few functions for making a range:
    RangeSize is start and size
    RangeEx is start and end where end is exclusive
    RangeIn is start and end where end is inclusive

    start/end -> first/last
    (end seems too much like end() in stl)
dev/alpha_console.cc:
dev/baddev.cc:
dev/ide_ctrl.cc:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pcidev.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
    Use the RangeSize function to create a range.

--HG--
extra : convert_revision : 29a7eb7fce745680f1c77fefff456c2144bc3994
2004-10-22 01:34:40 -04:00

392 lines
14 KiB
C++
Raw Blame History

/*
* Copyright (c) 2004 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* @file
* A single PCI device configuration space entry.
*/
#include <list>
#include <sstream>
#include <string>
#include <vector>
#include "base/inifile.hh"
#include "base/misc.hh"
#include "base/str.hh" // for to_number
#include "base/trace.hh"
#include "dev/pciareg.h"
#include "dev/pcidev.hh"
#include "dev/pciconfigall.hh"
#include "mem/functional_mem/memory_control.hh"
#include "sim/builder.hh"
#include "sim/param.hh"
#include "sim/universe.hh"
#include "dev/tsunamireg.h"
using namespace std;
PciDev::PciDev(const string &name, MemoryController *mmu, PciConfigAll *cf,
PciConfigData *cd, uint32_t bus, uint32_t dev, uint32_t func)
: DmaDevice(name), mmu(mmu), configSpace(cf), configData(cd), busNum(bus),
deviceNum(dev), functionNum(func)
{
// copy the config data from the PciConfigData object
if (cd) {
memcpy(config.data, cd->config.data, sizeof(config.data));
memcpy(BARSize, cd->BARSize, sizeof(BARSize));
memcpy(BARAddrs, cd->BARAddrs, sizeof(BARAddrs));
} else
panic("NULL pointer to configuration data");
// Setup pointer in config space to point to this entry
if (cf->deviceExists(dev,func))
panic("Two PCI devices occuping same dev: %#x func: %#x", dev, func);
else
cf->registerDevice(dev, func, this);
}
void
PciDev::ReadConfig(int offset, int size, uint8_t *data)
{
switch(size) {
case sizeof(uint32_t):
memcpy((uint8_t*)data, config.data + offset, sizeof(uint32_t));
*(uint32_t*)data = htoa(*(uint32_t*)data);
DPRINTF(PCIDEV,
"read device: %#x function: %#x register: %#x %d bytes: data: %#x\n",
deviceNum, functionNum, offset, size,
*(uint32_t*)(config.data + offset));
break;
case sizeof(uint16_t):
memcpy((uint8_t*)data, config.data + offset, sizeof(uint16_t));
*(uint16_t*)data = htoa(*(uint16_t*)data);
DPRINTF(PCIDEV,
"read device: %#x function: %#x register: %#x %d bytes: data: %#x\n",
deviceNum, functionNum, offset, size,
*(uint16_t*)(config.data + offset));
break;
case sizeof(uint8_t):
memcpy((uint8_t*)data, config.data + offset, sizeof(uint8_t));
DPRINTF(PCIDEV,
"read device: %#x function: %#x register: %#x %d bytes: data: %#x\n",
deviceNum, functionNum, offset, size,
(uint16_t)(*(uint8_t*)(config.data + offset)));
break;
default:
panic("Invalid Read Size");
}
}
void
PciDev::WriteConfig(int offset, int size, uint32_t data)
{
uint32_t barnum;
union {
uint8_t byte_value;
uint16_t half_value;
uint32_t word_value;
};
word_value = data;
DPRINTF(PCIDEV,
"write device: %#x function: %#x reg: %#x size: %d data: %#x\n",
deviceNum, functionNum, offset, size, word_value);
barnum = (offset - PCI0_BASE_ADDR0) >> 2;
switch (size) {
case sizeof(uint8_t): // 1-byte access
switch (offset) {
case PCI0_INTERRUPT_LINE:
case PCI_CACHE_LINE_SIZE:
case PCI_LATENCY_TIMER:
*(uint8_t *)&config.data[offset] = htoa(byte_value);
break;
default:
panic("writing to a read only register");
}
break;
case sizeof(uint16_t): // 2-byte access
switch (offset) {
case PCI_COMMAND:
case PCI_STATUS:
case PCI_CACHE_LINE_SIZE:
*(uint16_t *)&config.data[offset] = htoa(half_value);
break;
default:
panic("writing to a read only register");
}
break;
case sizeof(uint16_t)+1: // 3-byte access
panic("invalid access size");
case sizeof(uint32_t): // 4-byte access
switch (offset) {
case PCI0_BASE_ADDR0:
case PCI0_BASE_ADDR1:
case PCI0_BASE_ADDR2:
case PCI0_BASE_ADDR3:
case PCI0_BASE_ADDR4:
case PCI0_BASE_ADDR5:
// Writing 0xffffffff to a BAR tells the card to set the
// value of the bar
// to size of memory it needs
if (word_value == 0xffffffff) {
// This is I/O Space, bottom two bits are read only
if (htoa(config.data[offset]) & 0x1) {
*(uint32_t *)&config.data[offset] = htoa(
~(BARSize[barnum] - 1) |
(htoa(config.data[offset]) & 0x3));
} else {
// This is memory space, bottom four bits are read only
*(uint32_t *)&config.data[offset] = htoa(
~(BARSize[barnum] - 1) |
(htoa(config.data[offset]) & 0xF));
}
} else {
// This is I/O Space, bottom two bits are read only
if(htoa(config.data[offset]) & 0x1) {
*(uint32_t *)&config.data[offset] = htoa((word_value & ~0x3) |
(htoa(config.data[offset]) & 0x3));
if (word_value & ~0x1) {
Addr base_addr = (word_value & ~0x1) + TSUNAMI_PCI0_IO;
Addr base_size = BARSize[barnum];
// It's never been set
if (BARAddrs[barnum] == 0)
mmu->add_child((FunctionalMemory *)this,
RangeSize(base_addr, base_size));
else
mmu->update_child((FunctionalMemory *)this,
RangeSize(BARAddrs[barnum],
base_size),
RangeSize(base_addr, base_size));
BARAddrs[barnum] = base_addr;
}
} else {
// This is memory space, bottom four bits are read only
*(uint32_t *)&config.data[offset] = htoa((word_value & ~0xF) |
(htoa(config.data[offset]) & 0xF));
if (word_value & ~0x3) {
Addr base_addr = (word_value & ~0x3) +
TSUNAMI_PCI0_MEMORY;
Addr base_size = BARSize[barnum];
// It's never been set
if (BARAddrs[barnum] == 0)
mmu->add_child((FunctionalMemory *)this,
RangeSize(base_addr, base_size));
else
mmu->update_child((FunctionalMemory *)this,
RangeSize(BARAddrs[barnum],
base_size),
RangeSize(base_addr, base_size));
BARAddrs[barnum] = base_addr;
}
}
}
break;
case PCI0_ROM_BASE_ADDR:
if (word_value == 0xfffffffe)
*(uint32_t *)&config.data[offset] = 0xffffffff;
else
*(uint32_t *)&config.data[offset] = htoa(word_value);
break;
case PCI_COMMAND:
// This could also clear some of the error bits in the Status
// register. However they should never get set, so lets ignore
// it for now
*(uint16_t *)&config.data[offset] = htoa(half_value);
break;
default:
DPRINTF(PCIDEV, "Writing to a read only register");
}
break;
}
}
void
PciDev::serialize(ostream &os)
{
SERIALIZE_ARRAY(BARSize, 6);
SERIALIZE_ARRAY(BARAddrs, 6);
SERIALIZE_ARRAY(config.data, 64);
}
void
PciDev::unserialize(Checkpoint *cp, const std::string &section)
{
UNSERIALIZE_ARRAY(BARSize, 6);
UNSERIALIZE_ARRAY(BARAddrs, 6);
UNSERIALIZE_ARRAY(config.data, 64);
// Add the MMU mappings for the BARs
for (int i=0; i < 6; i++) {
if (BARAddrs[i] != 0)
mmu->add_child(this, RangeSize(BARAddrs[i], BARSize[i]));
}
}
#ifndef DOXYGEN_SHOULD_SKIP_THIS
BEGIN_DECLARE_SIM_OBJECT_PARAMS(PciConfigData)
Param<uint16_t> VendorID;
Param<uint16_t> DeviceID;
Param<uint16_t> Command;
Param<uint16_t> Status;
Param<uint8_t> Revision;
Param<uint8_t> ProgIF;
Param<uint8_t> SubClassCode;
Param<uint8_t> ClassCode;
Param<uint8_t> CacheLineSize;
Param<uint8_t> LatencyTimer;
Param<uint8_t> HeaderType;
Param<uint8_t> BIST;
Param<uint32_t> BAR0;
Param<uint32_t> BAR1;
Param<uint32_t> BAR2;
Param<uint32_t> BAR3;
Param<uint32_t> BAR4;
Param<uint32_t> BAR5;
Param<uint32_t> CardbusCIS;
Param<uint16_t> SubsystemVendorID;
Param<uint16_t> SubsystemID;
Param<uint32_t> ExpansionROM;
Param<uint8_t> InterruptLine;
Param<uint8_t> InterruptPin;
Param<uint8_t> MinimumGrant;
Param<uint8_t> MaximumLatency;
Param<uint32_t> BAR0Size;
Param<uint32_t> BAR1Size;
Param<uint32_t> BAR2Size;
Param<uint32_t> BAR3Size;
Param<uint32_t> BAR4Size;
Param<uint32_t> BAR5Size;
END_DECLARE_SIM_OBJECT_PARAMS(PciConfigData)
BEGIN_INIT_SIM_OBJECT_PARAMS(PciConfigData)
INIT_PARAM(VendorID, "Vendor ID"),
INIT_PARAM(DeviceID, "Device ID"),
INIT_PARAM_DFLT(Command, "Command Register", 0x00),
INIT_PARAM_DFLT(Status, "Status Register", 0x00),
INIT_PARAM_DFLT(Revision, "Device Revision", 0x00),
INIT_PARAM_DFLT(ProgIF, "Programming Interface", 0x00),
INIT_PARAM(SubClassCode, "Sub-Class Code"),
INIT_PARAM(ClassCode, "Class Code"),
INIT_PARAM_DFLT(CacheLineSize, "System Cacheline Size", 0x00),
INIT_PARAM_DFLT(LatencyTimer, "PCI Latency Timer", 0x00),
INIT_PARAM_DFLT(HeaderType, "PCI Header Type", 0x00),
INIT_PARAM_DFLT(BIST, "Built In Self Test", 0x00),
INIT_PARAM_DFLT(BAR0, "Base Address Register 0", 0x00),
INIT_PARAM_DFLT(BAR1, "Base Address Register 1", 0x00),
INIT_PARAM_DFLT(BAR2, "Base Address Register 2", 0x00),
INIT_PARAM_DFLT(BAR3, "Base Address Register 3", 0x00),
INIT_PARAM_DFLT(BAR4, "Base Address Register 4", 0x00),
INIT_PARAM_DFLT(BAR5, "Base Address Register 5", 0x00),
INIT_PARAM_DFLT(CardbusCIS, "Cardbus Card Information Structure", 0x00),
INIT_PARAM_DFLT(SubsystemVendorID, "Subsystem Vendor ID", 0x00),
INIT_PARAM_DFLT(SubsystemID, "Subsystem ID", 0x00),
INIT_PARAM_DFLT(ExpansionROM, "Expansion ROM Base Address Register", 0x00),
INIT_PARAM(InterruptLine, "Interrupt Line Register"),
INIT_PARAM(InterruptPin, "Interrupt Pin Register"),
INIT_PARAM_DFLT(MinimumGrant, "Minimum Grant", 0x00),
INIT_PARAM_DFLT(MaximumLatency, "Maximum Latency", 0x00),
INIT_PARAM_DFLT(BAR0Size, "Base Address Register 0 Size", 0x00),
INIT_PARAM_DFLT(BAR1Size, "Base Address Register 1 Size", 0x00),
INIT_PARAM_DFLT(BAR2Size, "Base Address Register 2 Size", 0x00),
INIT_PARAM_DFLT(BAR3Size, "Base Address Register 3 Size", 0x00),
INIT_PARAM_DFLT(BAR4Size, "Base Address Register 4 Size", 0x00),
INIT_PARAM_DFLT(BAR5Size, "Base Address Register 5 Size", 0x00)
END_INIT_SIM_OBJECT_PARAMS(PciConfigData)
CREATE_SIM_OBJECT(PciConfigData)
{
PciConfigData *data = new PciConfigData(getInstanceName());
data->config.hdr.vendor = htoa(VendorID);
data->config.hdr.device = htoa(DeviceID);
data->config.hdr.command = htoa(Command);
data->config.hdr.status = htoa(Status);
data->config.hdr.revision = htoa(Revision);
data->config.hdr.progIF = htoa(ProgIF);
data->config.hdr.subClassCode = htoa(SubClassCode);
data->config.hdr.classCode = htoa(ClassCode);
data->config.hdr.cacheLineSize = htoa(CacheLineSize);
data->config.hdr.latencyTimer = htoa(LatencyTimer);
data->config.hdr.headerType = htoa(HeaderType);
data->config.hdr.bist = htoa(BIST);
data->config.hdr.pci0.baseAddr0 = htoa(BAR0);
data->config.hdr.pci0.baseAddr1 = htoa(BAR1);
data->config.hdr.pci0.baseAddr2 = htoa(BAR2);
data->config.hdr.pci0.baseAddr3 = htoa(BAR3);
data->config.hdr.pci0.baseAddr4 = htoa(BAR4);
data->config.hdr.pci0.baseAddr5 = htoa(BAR5);
data->config.hdr.pci0.cardbusCIS = htoa(CardbusCIS);
data->config.hdr.pci0.subsystemVendorID = htoa(SubsystemVendorID);
data->config.hdr.pci0.subsystemID = htoa(SubsystemVendorID);
data->config.hdr.pci0.expansionROM = htoa(ExpansionROM);
data->config.hdr.pci0.interruptLine = htoa(InterruptLine);
data->config.hdr.pci0.interruptPin = htoa(InterruptPin);
data->config.hdr.pci0.minimumGrant = htoa(MinimumGrant);
data->config.hdr.pci0.maximumLatency = htoa(MaximumLatency);
data->BARSize[0] = BAR0Size;
data->BARSize[1] = BAR1Size;
data->BARSize[2] = BAR2Size;
data->BARSize[3] = BAR3Size;
data->BARSize[4] = BAR4Size;
data->BARSize[5] = BAR5Size;
return data;
}
REGISTER_SIM_OBJECT("PciConfigData", PciConfigData)
#endif // DOXYGEN_SHOULD_SKIP_THIS
Reference in a new issue View git blame Copy permalink